Looking for a way to just "place" graphics and text where I want.

In GoLive I could just drag a text box or graphic placeholder exactly where I wanted it. This made it very easy to design pages with no programing.
Is there a way to do this or something similar in Dreamweaver CS4?
Thanks.

under usage-i only have the camera roll, photo library and photostream-they don't show the individual albums withing my libraries-if i delete library-i would delete about 12 albums
I don't sync pics but was hoping the albums showed up there. It was a long shot.

Similar Messages

Is there a way for a form user to load graphics and text in same field?

I am aware that you can load text into a text field and graphics into an image field. However, I would like to load a document containing text and graphics (e.g., MS Word or RTF) into a single field on a PDF form. Is there any way to do this?

Paul,
I believe that the example of attaching a file that you have provided will solve the problem. I am using LiveCycle Designer, so using the code that is in your example should be no problem. The end-user will use Adobe Reader, so as you mentioned, I will use Acrobat to extend the features so that the form can be used by Reader.
Thanks so much for your help,
Daniel
From: pguerett <[email protected]>
To: Daniel Beinart <[email protected]>
Sent: Monday, April 25, 2011 3:03 PM
Subject: Re: Is there a way for a form user to load graphics and text in same field?
It is part of the PDF AcroForm side of things .....Are you using Reader or Acrobat to fill the form. If Reader then you will have to Reader Extend to make this work ....if Acrobat then you simply need to add some code. I have attached a sample that shows you how to do it if you want it.
Paul

Looking for best way to edit 29.97 and 25 fps footage together.

Hi everyone.
I've looked on the boards, but haven't found exactly what I'm looking for.. any help is appreciated.
I'm starting a job shot in Argentina, and they shot both 25fps and 29.97fps. I believe they used DSLR cameras.
I think the delivery format is web only, but am awaiting final word.
Questions-
Do I need to convert the footage to one frame rate, or will PPro handle the different rates in the same timeline without the footage looking awkward?
Can I just have PPro interpret the media as a different frame rate?
If I need to convert, would you please recommend best software?
Would you recommend converting to 29.97 or 25?
Thanks all. Much appreciated.
Michael

I am inclined to say edit 25fps and then the dropped frames of the 29.97 should not look too bad with most footage. You mileage may vary. It really depends on the footage. It could make it look choppy. But maybe better than 25 played at 29.97 using frame blending to make new frames out of thin air.
Create your 25fps sequence from the 25fps footage. Then when you drop the 29.97 on it, it will automatically drop the frames necessary to make it 25fps.
If, however, you are going to write it to DVD, you want to do that in the PAL or NTSC settings you would normally use for wherever it is that you live.
By the way, if you interpret the 29.97 as 25 it will play back slower. Slightly slow motion. If you interpret the 25 as 29.97 it will appear fast. Once again, it depends on the footage. If you shot objects (like travel stuff), then speed is not a huge deal, but if you shot people or animals it could make a huge difference.

Looking for a way to export full Popularity Trends data

Greetings!
I'm looking for a way to access all "popularity trends" data for a SharePoint 2013 publishing site in one place. I'm probably missing something pretty basic here, (I hope), but it seems if I pull up popularity trends for the site, all I get is
the hits & unique users for the site as a whole. If I go into my pages library and choose "Most Popular Items," I'm given a search results page that I can't run reports from. And if I select the "popularity trends" link under one of
those search results, I get a usage report for a single, specific page.
I've thought about doing a multi-select of pages from my site's Pages library, but I have more than 100 pages in the site, so I still can't get at everything all at once. Plus, the resulting usage.xlsx file just includes a lot of reports on individual
pages.
There's got to be something more all-encompassing than this...right?
Help!

Hi,
According to your post, my understanding is that you wanted to see the all popularity trends data for a site.
Where did you export the usage report?
Did you export the report from Popularity and Search Reports?
To view the Popularity Trends report for a site collection
Verify that the user account that is performing this procedure is a member of the Owners group.
In the site collection, on the Settings menu, click Site ettings.
On the Site Settings page, in the Site Collection Administration section, click Popularity and Search Reports.
On the View Usage Reports page, in the Usage Reports section, click Usage.
In the message box, click Open to open the report in Excel, or click Save or Save as to save the report.
Click the tabs to view the usage report for the different usage event types.
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Looking for a way to hide the menu bar

hey all, i've been looking for a way to hide the menu bar completely and then mouse over it to bring it back, like how the dock is when it's hidden. i want the same thing for the menu bar to free up a little more space and make it a little cleaner looking. i'm currently using eclipse just to black it out completely but there's just a black bar across the top of my screen with it and i just want it gone. any suggestions?

As an aside; if you need to keep several apps fairly close to hand without cluttering the menu bar or dock, create a folder within your Applications folder, and place aliases of the apps in there, then drag the folder to the dock below the divider (next to the trash). Right click on the folder in the dock to get a pop-up list to choose from. I use the same idea for frequently used files and games too (seperate folders)

Hi I am looking for a way to have trace32 open multiple files on remote computers

Simply put I am looking for someone who could afford to give me a basic script (vbs) that I could run from an elevated command prompt. It would need to be available for me to type in the name of a remote computer or (mulitple if possible) and also
allow me to choose log files to open or multiple files and then open them using trace 32. Hopefully it would detect the available log files and show me what is available to choose to open... anyone know of such a thing or know how to go about setting up something
like this for people to use?
EDIT
I was able to create a basic script to do what I wanted but I want to be able to add wildcards for the rollover logs... Can someone suggest the easiest way to do that as I am not sure how to add the wildcards directly before the .log
here is the script.
' ******Created by Luis Delgado*********
'This script will get a remote computers .log files depending on which documents you enter in the "files to open on remote computer using trace32" section
'Get and open log files on remote Computer
on error resume next
Set WshShell = Wscript.CreateObject("Wscript.Shell")
strcomputer = inputbox("Enter remote computer name or leave as localhost for this computer","Get log files from a remote computer with Trace32","Localhost")
If strComputer = "" Then
WScript.Quit
End If
'Opens trace32
wshShell.run "C:\Program Files\ConfigMgr 2007 Toolkit\CCM Tools\Trace32.exe"
'Files to open on remote computer using trace32
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\datatransferservice.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\ccmexec.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\locationservices.log"
!!!!NOTE!!!
What I need is for any file that starts with datatransferservices, ccmexec, or locationservices to open in trace32
my thought would be place a wild card in its respective spots but it does not work see below
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\datatransferservice*.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\ccmexec*.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\locationservices*.log"

The roll over logs all have the same name exact the extension is .lo_ , So.. I'm not sure what you are looking for.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Looking for a way to broadcast a line in to the Airpot Express?

Looking for a way to run line input into my macbook and broadcast it to the Airport Express to Play on my Stereo..

It is discussed on the xfce forums but unfortunately that solution requires editing by hand. However it does seem relatively easy to automate. Writing a graphical program for those tasks is something you'd only have to do once.

Looking for a way to get built in audio to be heard out of AirTunes

Looking for a way to get built in audio to be heard out of AirTunes, not just iTunes.

thanks for the post, i downloaded that app but like i read, its really a worthless piece of junk, the 2 second delay yet alone i did not succeed to send my iChat audio to my airTunes speakers.

Looking for a way to switch views using Javascript

Hi ! I'm currently studying Acrobat 3D. I've got a PDF document with a 3D Annotation, which was imported from a U3D file. I defined 3 views : "initial", "front" and "top". My problem is that I'm looking for a way to switch views using Javascript. In fact, when I list cameras using the following code, I only get one camera called "DefaultView". So my question is : where has my "initial", "front" and "top" views been ? Is there a way I can switch between them using Javascript ? for(i=1;i<scene.cameras.count;++i) { Cam = scene.cameras.getByIndex(i); console.println("camera " + i + " : " + Cam.name); } Thank you very much in advance. françois

Are the dates on these entries correct??!! Doesn't seem like it. Anyway, just in case, here's some code to help:
//=========================================================
backgrounder = new RenderEventHandler();
backgrounder.onEvent = function(event)
runtime.removeEventHandler(this);
canvas = event.canvas;
background = canvas.background;
keyer = new KeyEventHandler();
keyer.onEvent = function(event)
switch (event.characterCode)
case 49:
cam = scene.cameras.getByIndex( 0 );
canvas.setCamera( cam );
break;
case 50:
cam = scene.cameras.getByIndex( 2 );
canvas.setCamera( cam );
break;
case 51:
cam = scene.cameras.getByIndex( 3 );
canvas.setCamera( cam );
break;
runtime.addEventHandler( keyer );
runtime.addEventHandler(backgrounder);
//inform user
console.println("Use the 1,2,3 Keys to toggle between cameras");
//===============================================

Looking for a way to create/edit a newsletter online, then be able to generate a customized PDF file

I am looking for a way to be able to customize a newsletter online, then be able to export/generate a PDF file from that newsletter.
Basically this is for a friend that is a real estate agent, and currently she is creating the newsletters in MS Publisher. I'm hoping to find a way to be able to allow her to login to a secure area of her webpage(that part isn't a problem) but then be able to create/customize a monthly newsletter that needs to be customizable.
For example, the August Newsletter will be 2-sided, and most of the newsletter will be the same, but she needs to be able to have a newsletter for different apartment buildings so the customers can just go to their building link/area on the webpage and be able to download that month's custom PDF file that has a portion of the main newsletter that is a table/list of properties for that specific location. The data will be stored in a database.
After writing the above, I can probably create a front-end to the database so she can enter everything that way, but I still need a way for her to generate the customized PDFs after she is done with that month's data.
I was hoping Adobe had something that could be used, or am I stuck using php or Javascript and just doing this with custom scripting?
Anyone have any ideas?
Thanks!
John

I was hoping Adobe had something that could be used, or am I stuck using php or Javascript and just doing this with custom scripting?
I think you will have to do the latter. While you are thinking about writing the PDF file, don't overlook fpdf (google it)....

Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens. Haven't found any posts that relate, but I'm not sure how to ask the right question. To be clear, I want to write a helper VI to go through a list of subVIs to make sure the background images are all in the same place when their respective subVIs open. I hate manually playing with scroll bars before I save each of the VIs... I'm figuring I need to find the top/left location of the background image (know how to do this already) and then set a VI FP property to these values or some offset, but I can't find the relevant property. FP:run-timeposition:custom looked promissing, but only affects the location of the window, not the area of the front panel the window is displaying.
Solved!
Go to Solution.

Cool. Getting closer. The way I implemented your suggestion affects the subVI only if it is open. I can use this to do what I'm after, perhaps putting the code into each subVI. Maybe open all subs, run the helper, and save. Seems like I'm missing the elegant version...
My proof of concept code:

Looking for best way to filter status or meter data from differently formatted text.

With the product we design we are able to communicate via RS-232 ports. What I'm trying to do is filter out the data that is given by multiple differnt types of products that will give similar data back, but in a differnt format. Such that in a status command I'm looking for everything to be in a non failed state. But some items will show warning, failure, #.##w(for warning), or #.##f (for fail). But the format of each product is different. Also for a meter command I'm looking for a way to filter out just the numeric value for each phase amplitude, but once again the format will be different for each product. I have been able to pull this data out easy enough for an individual product but not on a wide product range with the same VI.

"Service is not available at this time
Try back later"
Bye...
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

I am looking for a way to develop a grammar checker for the web like spellcheckerplus can you help?

I am looking for a way to develop a grammar checker for the web like spellcheckerplus can you help? I have my own dictionary for comparing and replacing words.

Hi,
The forum is about install/uninstall .NET Framework, please post your issue to dev related forum instead of here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Looking for a way to directly choose keyboard layout.

I'm looking for a way to organise separated keyboard keys combinations (or single keys - the best) for every keyboard layout. I want to be able to choose layout directly. One unique key (keys combination) for each layout.
One way may be smth. like setting a key to execute a command:
setxkbmap -layout "us,ru"
and
setxkbmap -layout "ru,us"
For keys setup in OpenBox may be used obkey, for example.
In general it works. But in such a case, when not latin/english layout is the first one, or even single one, in the command's layout list, applications will not react on Ctrl-S, Ctrl-Z and so on. It do not depend on current layout, it depend on the first entry in last sequence to be used in the layouts list.
I'm shure there are some other better ways to implement the idea. Please, give me advise: what a tool, or tool set to study and use?

Stack wrote:
the sad clown wrote:
(just make sure that the changed layout doesn't break your keybind):
setxkbmap -rules xorg -model pc104 -layout us -option
Just change the layout parameters (and any other changes you need) for as many layouts as you want.
Unfortunately, if the single layout, or first in the list layout is not 'us', but my national, GUI applications will stop to react on Ctrl-S, Ctrl-Z and similar things.
Can it be fixed?
Is it that Ctrl-[S,Z] don't work or that they change locations because the keyboard layout has been modified? The first is a problem, the second is to be expected if you are changing the keyboard layout.
Stack wrote:
As I catch, for testing there is no difference between setxkbmap and xorg.conf. Also, there is no way to specify there layout specific switch combinations. In coma separated list of values for XKbOptions there is not binds to corresponding position in layouts list. All the combinations will do the same - cycle between layouts. http://www.xfree86.org/current/XKB-Config2.html#5
Layout itself and layout switching mechanics are too different objects (or classes) in terms of programming. I'm not shure I'll be on a right way, if I'll decide to dive deeply into syntax of '/usr/share/X11/xkb/rules/xorg' and '/usr/share/X11/xkb/symbols/*' (mentioned at https://wiki.archlinux.org/index.php/Co … _xorg.conf ) and hacking of ready to use layouts. If I'm searching for a way to switch them only. Am I right?
My suggestion isn't that you use the XkbOptions switch since this won't work for what you are asking. Instead, I'm recommending you use a little keyboard shortcut utility, xbindkeys and use that to issue the setxkbmap command I mentioned earlier. All you have to do is bind the shortcut to keys that don't change across keyboard layout changes (if you have a number pad, an easy solution is to use a modifier + one of these keys as it won't change). This isn't a toggle like the xorg.conf edit, but can switch to any layout you choose to bind in any order you choose to perform.

I am looking for a way to enter multiple dates into a field without the form becoming too long.

I am looking for a way to enter multiple dates into a field without the form becoming too long.
This will be used by an old school bookeeper who needs the form to fit on one page.
Any ideas?

Hi,
If you don't need the field to provide a date picker, verify it's a date, or don't need to sort the dates in the table, you can just use a text area field, and have your form filler enter the dates comma separated. Otherwise you'd have to add multiple fields. However, you can lessen the space each field takes up veritically, by using the "Labels Left" option (in the toolbar).
Thanks,
Todd

Looking for a way to just "place" graphics and text where I want.

Similar Messages

Maybe you are looking for