Looking for a way to make comments in Purchase Orders

Dear All,
I'm looking for a way to make comments in purchase orders, in a way that
a) such comments should not be visible for vendor
b) such comments to be visisble in MIGO... (during GR ex.)
thanks in advance for help
Regards,
Andrey

Hi,
I think you can always enter the text during GR creation. But seems no text flows from PO to GR during its entry.in the PO the texts maintained in the PO will be the additional info to vendor.
Regards,

Similar Messages

Looking for a way to make a photo less than 100kb

I have all the 'considered best' photo apps for my Ipad3. I've read every manual, looked on the net, downloaded any trial photo sizer app I can find and have spent hours trying to do what I believe should be a no brainier but have not found a resolution to a simple problem.
I'm trying to find a way to make a photo a specific MB size. I post on a bulletin board that has a restriction of 100MB upload. There is a great app for Mac but ways to make a photo a specific file size doesn't seem to be available for the Ipad. After hours of searching I'm at a loss as to why there aren't any apps to do this.
A simple app with a slider or other that will give you the MB size as you move it would be great. Every app has a plethora of options and they still can't even do that.
Any suggestions?
Dan

Thanks sberman
That will work taking a few steps although I would think it's a last resort with fair results. Thanks again. While waiting for a response I decided to bite the bullet and purchase an app that looked promising. ( Don't like to purchase as I've purchased a number of .99 apps and wasted money )
So, I purchased this app called 'Resizer' not knowing if it would do the trick. It did! I even got a bonus as the app lets you upload to a photo site. From there it's a simple paste the link and I'm done. The app appears to have been made for the purpose of posting photos to BB's which is what I'm doing.
I was trying to get as close to the max size as I could as they have a weekly 'photo day' and wanted the best quality. That app did it.
Thanks again for the suggestion.
Dan

I work with retired people who are looking for a way to make the bookmarks larger so they may be more easily read. Any suggestions?

As the question asks, is there a way to make the bookmark tabs larger for people whose eyesight is not as keen as when they were younger? For instance is there an add on that would address this? thank you for your help.

As the question asks, is there a way to make the bookmark tabs larger for people whose eyesight is not as keen as when they were younger? For instance is there an add on that would address this? thank you for your help.

Wi-Fi WEP security - looking for a way to make my use more secure.

Having system results even using Kaspersky as a Internet application for security, and found the reinstall not just slow as a result of my attempts to reinstall, and failing to complete the down load. Looking for a tool that can help, any suggestions?

Second the advice to remove the Anti-Virus software.
WEP - Are you using System Preferences -> Sharing -> Internet Sharing?
If you are, you cannot change the protection. It is WEP only.
I would suggest you get a dedicated router which is capable of WPA/WPA2 encryption.
If you have a short term need for Internet Sharing (such as a hotel room with ethernet, and you want to share with your iPhone/iPad/iPod Touch, etc...), then Internet Sharing for that is not that much of an issue. After all you are trusting the hotel network :-)

Hello, I'm looking for software which allows me to create purchase orders in front of the customers with digital signature

Also, it would be great if I could make my purchase order by indicating my product and adjusting the quantity.
Once, order is made that my quantity in stock is also adjusted. Hope you'll know what I mean ?

And also the possibility to have my orders converted in packing slips and invoices... :-)

Is there a way to make comments "move to the back", behind the text and lines?

Is there a way to make comments "move to the back", behind the text and lines?
I am using Acrobat X Standard to "highlight" lines using comments lines at 12pt width and 50% opacity on DWG files converted to PDF. The opacity setting makes the text and lines readable behind the highlighting, but the colors do not print well. Moving the highlighting behind the existing text and lines would allow me to use 100% opacity with more vibrant colors.
Before, we highlighted by hand, but those colors do not scan or copy well. Digitizing the highlighting is cleaner, and can be edited without starting over. The "comments" lines can be applied by Acrobat Reader, Acrobat Standard, and Acrobat Pro, so there's an advantage. Even more important is that the average file size of an 11x17 print that is highlighted and scanned in color is 1000 KB, while doing it this way, they tend to be 100-150 KB, and the text remains searchable. If there's another system that people use, I'm open to that instead. I haven't looked in to doing the highlighting in AutoCAD.
Naturally, everything I'm doing is protected, and cannot be shared, sorry.
Thanks.
Message was edited by: Nathan Goldblatt

No, that's not really an option.

Looking for automated way to test print PnP printer after install then delete

At times we test 20 to 30 printers in a day. I am looking for automated ways to increase the efficiency of this. I would like to simply have the printer install using PnP print a test page then delete itself after the test page or on removal. Are there any settings that can be changed on the computer to change the PnP process to make this possible. I am currently trying to learn and understand the Plug and play process so that I may find out how to get started. Any ideas would be greatly appreciated.
Thanks
This topic first appeared in the Spiceworks Community

Chris
I spent all day Googling and doing side by side comparisons of my old and new systems.
My display is a Dell U2410. It has several presets, including sRGB and Adobe RGB. I've been using sRGB.
On my OLD system, (Win XP, PsCS2, DwCS4) there seems to be no distinction between color managed and non color managed apps, even on this wide gamut display. I could capture (digital camera) in Adobe RGB, open and edit in PsCS2, save as .psd, convert to CMYK for print, or convert to sRGB for SFW. All images looked identical and they printed and displayed perfectly. I thought this was normal, and seemed logical. This also seems to be the source of my incorrect assumptions. I was trying to get my new machine to behave like my old one.
So I get this new machine (Windows 7, PsCS5, DwCS5) and now (still in sRGB display mode) all color managed apps appear de-saturated. Non color managed apps are OK. If I switch the display to Adobe RGB, color managed apps are OK, but non color managed apps are way too saturated. From my investigation, I believe this is normal behavior on a wide gamut display. I've tried changing the Control Panel > Display > Screen Resolution > Advanced settings > Color Management options, but to no avail. Either I'm missing something, or Windows 7 is doing color management differently.
It seems my only option now is to use Adobe RGB display setting for Ps, etc. and switch to sRGB for Dw and non color managed apps. Or, have 2 separate files for print and web. I've Googled 'til my eyes are numb and still not sure I'm getting this. Any enlightenment would be greatly appreciated.
Finally, I don't see an edit function here, so I can't remove my previous incorrect reply. Moderator, please feel free to do so.
Thanks

Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens. Haven't found any posts that relate, but I'm not sure how to ask the right question. To be clear, I want to write a helper VI to go through a list of subVIs to make sure the background images are all in the same place when their respective subVIs open. I hate manually playing with scroll bars before I save each of the VIs... I'm figuring I need to find the top/left location of the background image (know how to do this already) and then set a VI FP property to these values or some offset, but I can't find the relevant property. FP:run-timeposition:custom looked promissing, but only affects the location of the window, not the area of the front panel the window is displaying.
Solved!
Go to Solution.

Cool. Getting closer. The way I implemented your suggestion affects the subVI only if it is open. I can use this to do what I'm after, perhaps putting the code into each subVI. Maybe open all subs, run the helper, and save. Seems like I'm missing the elegant version...
My proof of concept code:

I am looking for a way to develop a grammar checker for the web like spellcheckerplus can you help?

I am looking for a way to develop a grammar checker for the web like spellcheckerplus can you help? I have my own dictionary for comparing and replacing words.

Hi,
The forum is about install/uninstall .NET Framework, please post your issue to dev related forum instead of here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Looking for a way to directly choose keyboard layout.

I'm looking for a way to organise separated keyboard keys combinations (or single keys - the best) for every keyboard layout. I want to be able to choose layout directly. One unique key (keys combination) for each layout.
One way may be smth. like setting a key to execute a command:
setxkbmap -layout "us,ru"
and
setxkbmap -layout "ru,us"
For keys setup in OpenBox may be used obkey, for example.
In general it works. But in such a case, when not latin/english layout is the first one, or even single one, in the command's layout list, applications will not react on Ctrl-S, Ctrl-Z and so on. It do not depend on current layout, it depend on the first entry in last sequence to be used in the layouts list.
I'm shure there are some other better ways to implement the idea. Please, give me advise: what a tool, or tool set to study and use?

Stack wrote:
the sad clown wrote:
(just make sure that the changed layout doesn't break your keybind):
setxkbmap -rules xorg -model pc104 -layout us -option
Just change the layout parameters (and any other changes you need) for as many layouts as you want.
Unfortunately, if the single layout, or first in the list layout is not 'us', but my national, GUI applications will stop to react on Ctrl-S, Ctrl-Z and similar things.
Can it be fixed?
Is it that Ctrl-[S,Z] don't work or that they change locations because the keyboard layout has been modified? The first is a problem, the second is to be expected if you are changing the keyboard layout.
Stack wrote:
As I catch, for testing there is no difference between setxkbmap and xorg.conf. Also, there is no way to specify there layout specific switch combinations. In coma separated list of values for XKbOptions there is not binds to corresponding position in layouts list. All the combinations will do the same - cycle between layouts. http://www.xfree86.org/current/XKB-Config2.html#5
Layout itself and layout switching mechanics are too different objects (or classes) in terms of programming. I'm not shure I'll be on a right way, if I'll decide to dive deeply into syntax of '/usr/share/X11/xkb/rules/xorg' and '/usr/share/X11/xkb/symbols/*' (mentioned at https://wiki.archlinux.org/index.php/Co … _xorg.conf ) and hacking of ready to use layouts. If I'm searching for a way to switch them only. Am I right?
My suggestion isn't that you use the XkbOptions switch since this won't work for what you are asking. Instead, I'm recommending you use a little keyboard shortcut utility, xbindkeys and use that to issue the setxkbmap command I mentioned earlier. All you have to do is bind the shortcut to keys that don't change across keyboard layout changes (if you have a number pad, an easy solution is to use a modifier + one of these keys as it won't change). This isn't a toggle like the xorg.conf edit, but can switch to any layout you choose to bind in any order you choose to perform.

Looking for a way to hide the menu bar

hey all, i've been looking for a way to hide the menu bar completely and then mouse over it to bring it back, like how the dock is when it's hidden. i want the same thing for the menu bar to free up a little more space and make it a little cleaner looking. i'm currently using eclipse just to black it out completely but there's just a black bar across the top of my screen with it and i just want it gone. any suggestions?

As an aside; if you need to keep several apps fairly close to hand without cluttering the menu bar or dock, create a folder within your Applications folder, and place aliases of the apps in there, then drag the folder to the dock below the divider (next to the trash). Right click on the folder in the dock to get a pop-up list to choose from. I use the same idea for frequently used files and games too (seperate folders)

Looking for a way to broadcast a line in to the Airpot Express?

Looking for a way to run line input into my macbook and broadcast it to the Airport Express to Play on my Stereo..

It is discussed on the xfce forums but unfortunately that solution requires editing by hand. However it does seem relatively easy to automate. Writing a graphical program for those tasks is something you'd only have to do once.

Looking for a way to get built in audio to be heard out of AirTunes

Looking for a way to get built in audio to be heard out of AirTunes, not just iTunes.

thanks for the post, i downloaded that app but like i read, its really a worthless piece of junk, the 2 second delay yet alone i did not succeed to send my iChat audio to my airTunes speakers.

Looking for a way to Export Still Image to iPhoto

Hi I'm looking for a way to export a still image from iMovie 08 to iPhoto 08? The simple drag, help, web search etc doesn't seem to come up with an answer but it's been a long day.
Thanks

Find the still within an event clip, right mouse, select add still frame to project. Repeat for all the stills you want.
In Finder under pictures, you should find files for all the stills you created. Import them into Iphoto and there you have it.
There is probably an easier way but this is not too bad.

Hola a todos , busco una manera de crear un pdf desde la impresora de ios, como lo puedo resolver, gracias. Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Try this process on your Mac. These files will be regenerated by Mac OS X with default settings.
1. Quit the Mac App Store
2. Trash the following folders and files; (~ is your Home folder)
~/Library/Caches/com.apple.appstore
~/Library/Caches/com.apple.storeagent
~/Library/Cookies/com.apple.appstore.plist
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
~/Library/Preferences/com.apple.streagent.plist.lockfile
Mac HD/Library/Preferences/SystemConfiguration/networkinterfaces.plist
3. Restart your Mac
4. Open the Mac App Store
5. Log into your MAS account

Looking for a way to make comments in Purchase Orders

Similar Messages

Maybe you are looking for