Looking for a way to reproduce this neat flip action in Edge Animate

Does anyone know how one would accomplish this neat flip action in Edge Animate? Or have info on where I might look for the flip code? Here's the link: Google Impact Challenge | San Francisco Bay Area
Thanks in advance.

Hi ,
You can take a look at this forum post : How to "Flip (like a card) image?
Thanks and Regards,
Sudeshna Sarkar

Similar Messages

Looking for a way to preserve better result when resize to a small version

Hi,
Currently I ask the designer to design a boxshot at http://www.datanumen.com/temp/psd/aar-2048x2048-new-revised.zip . The characters in the large version looks fine. However, when I resize it to a small version, then some characters in the header, such as “Advanced” and “Repair”, not only losing their details, but also seems to be distorted, like this http://www.datanumen.com/temp/psd/distort.jpg
So, I am looking for a way to prevent this, at least these characters should not be distorted, like this:
http://www.datanumen.com/temp/psd/aarboxst.jpg
Maybe by changing the font, or changing the resize method.
Thanks

You have a number of layers linked, which might well be causing the distortion. I had to use some font substitution so I hope I have it close. The V2.1 (which is one of the linked layers) is a touch misaligned with the box. Otherwise, try using a finer font for ACCESS

I am having a hard time with a page that is working for everyone else. When I click on anything in the site I get a message that says "The page you were looking for doesn't exist." This is happening on both my ipad 2 and my iphone 5. I cleared my cache

When I click on anything in the site I get the message " The page you were looking for doesn't exist." This website works for everyone else, but not on my iPad 2 or iPhone 5. I cleared my cache and history on the iPad, but it still isn't working.

I live in Germany and my credit card is in my native country of Holland .. then it
doesn't accept my credit card.
Your first statement explains the second statement. To use the German iTunes Store, you need to prove that you're a resident of Germany (that is required by the content owners who will not allow cross-border sales) and the only way Apple can provide such a verification is by requiring that you enter in either a German credit card or a German-purchased iTunes prepaid card. Since I presume the former is not a possibility, you'll need to do the latter if you wish to purchase content from the iTunes Store. Again, this is not Apple's choice but is forced on them by the content owners as a requirement for Apple being allowed to sell the content. The EU is working on regulations that would force the content owners to allow access pan-EU, but that's still in the works.
You do not need an iTunes Store account to activate and run your iPad, though; at least, I didn't need one for either of my two iPads. If you only want to set up an account so you can get free iPad apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
As to the German iTunes Store in English, you can comment to Apple on that via their feedback pages:
http://www.apple.com/feedback
Regards.
P.S. Regarding "this is the only place for a complaint and that will no doubt get removed because
I'm not full of happy joy sparkles.
As stated in the terms of use to which we all agreed, this isn't a complaint forum, it's a technical support forum. You don't have to be full of "happy joy sparkles", but posts that are nothing but complaints may indeed be removed. If you want to complain to Apple, use the feedback pages.
Message was edited by: Dave Sawyer

Looking for a way to Export Still Image to iPhoto

Hi I'm looking for a way to export a still image from iMovie 08 to iPhoto 08? The simple drag, help, web search etc doesn't seem to come up with an answer but it's been a long day.
Thanks

Find the still within an event clip, right mouse, select add still frame to project. Repeat for all the stills you want.
In Finder under pictures, you should find files for all the stills you created. Import them into Iphoto and there you have it.
There is probably an easier way but this is not too bad.

Hola a todos , busco una manera de crear un pdf desde la impresora de ios, como lo puedo resolver, gracias. Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Try this process on your Mac. These files will be regenerated by Mac OS X with default settings.
1. Quit the Mac App Store
2. Trash the following folders and files; (~ is your Home folder)
~/Library/Caches/com.apple.appstore
~/Library/Caches/com.apple.storeagent
~/Library/Cookies/com.apple.appstore.plist
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
~/Library/Preferences/com.apple.streagent.plist.lockfile
Mac HD/Library/Preferences/SystemConfiguration/networkinterfaces.plist
3. Restart your Mac
4. Open the Mac App Store
5. Log into your MAS account

Looking for a way to switch views using Javascript

Hi ! I'm currently studying Acrobat 3D. I've got a PDF document with a 3D Annotation, which was imported from a U3D file. I defined 3 views : "initial", "front" and "top". My problem is that I'm looking for a way to switch views using Javascript. In fact, when I list cameras using the following code, I only get one camera called "DefaultView". So my question is : where has my "initial", "front" and "top" views been ? Is there a way I can switch between them using Javascript ? for(i=1;i<scene.cameras.count;++i) { Cam = scene.cameras.getByIndex(i); console.println("camera " + i + " : " + Cam.name); } Thank you very much in advance. françois

Are the dates on these entries correct??!! Doesn't seem like it. Anyway, just in case, here's some code to help:
//=========================================================
backgrounder = new RenderEventHandler();
backgrounder.onEvent = function(event)
runtime.removeEventHandler(this);
canvas = event.canvas;
background = canvas.background;
keyer = new KeyEventHandler();
keyer.onEvent = function(event)
switch (event.characterCode)
case 49:
cam = scene.cameras.getByIndex( 0 );
canvas.setCamera( cam );
break;
case 50:
cam = scene.cameras.getByIndex( 2 );
canvas.setCamera( cam );
break;
case 51:
cam = scene.cameras.getByIndex( 3 );
canvas.setCamera( cam );
break;
runtime.addEventHandler( keyer );
runtime.addEventHandler(backgrounder);
//inform user
console.println("Use the 1,2,3 Keys to toggle between cameras");
//===============================================

Looking for a way to export full Popularity Trends data

Greetings!
I'm looking for a way to access all "popularity trends" data for a SharePoint 2013 publishing site in one place. I'm probably missing something pretty basic here, (I hope), but it seems if I pull up popularity trends for the site, all I get is
the hits & unique users for the site as a whole. If I go into my pages library and choose "Most Popular Items," I'm given a search results page that I can't run reports from. And if I select the "popularity trends" link under one of
those search results, I get a usage report for a single, specific page.
I've thought about doing a multi-select of pages from my site's Pages library, but I have more than 100 pages in the site, so I still can't get at everything all at once. Plus, the resulting usage.xlsx file just includes a lot of reports on individual
pages.
There's got to be something more all-encompassing than this...right?
Help!

Hi,
According to your post, my understanding is that you wanted to see the all popularity trends data for a site.
Where did you export the usage report?
Did you export the report from Popularity and Search Reports?
To view the Popularity Trends report for a site collection
Verify that the user account that is performing this procedure is a member of the Owners group.
In the site collection, on the Settings menu, click Site ettings.
On the Site Settings page, in the Site Collection Administration section, click Popularity and Search Reports.
On the View Usage Reports page, in the Usage Reports section, click Usage.
In the message box, click Open to open the report in Excel, or click Save or Save as to save the report.
Click the tabs to view the usage report for the different usage event types.
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Looking for a way to create/edit a newsletter online, then be able to generate a customized PDF file

I am looking for a way to be able to customize a newsletter online, then be able to export/generate a PDF file from that newsletter.
Basically this is for a friend that is a real estate agent, and currently she is creating the newsletters in MS Publisher. I'm hoping to find a way to be able to allow her to login to a secure area of her webpage(that part isn't a problem) but then be able to create/customize a monthly newsletter that needs to be customizable.
For example, the August Newsletter will be 2-sided, and most of the newsletter will be the same, but she needs to be able to have a newsletter for different apartment buildings so the customers can just go to their building link/area on the webpage and be able to download that month's custom PDF file that has a portion of the main newsletter that is a table/list of properties for that specific location. The data will be stored in a database.
After writing the above, I can probably create a front-end to the database so she can enter everything that way, but I still need a way for her to generate the customized PDFs after she is done with that month's data.
I was hoping Adobe had something that could be used, or am I stuck using php or Javascript and just doing this with custom scripting?
Anyone have any ideas?
Thanks!
John

I was hoping Adobe had something that could be used, or am I stuck using php or Javascript and just doing this with custom scripting?
I think you will have to do the latter. While you are thinking about writing the PDF file, don't overlook fpdf (google it)....

Looking for a way to find out the x,y coordinates of a string inside a PDF

Hi!
I'm looking for a way to find out the x,y coordinates of a string inside a PDF (with free java api's only)
I got a pdf, and a string to find inside it, what i need to do is to get this string x,y position inside that pdf....
If any one knows of such, plz let me know...
Thanx ahead
Daniel.

vedmack wrote:
Hi!
I'm looking for a way to find out the x,y coordinates of a string inside a PDF (with free java api's only)
I got a pdf, and a string to find inside it, what i need to do is to get this string x,y position inside that pdf....
If any one knows of such, plz let me know...
Thanx ahead
Daniel.AFAIK, a string of text does not have an (x,y) location inside a PDF file. The location is exists on your screen, and will differ whenever you adjust the resolution of it. Text can have a location when it's stored as an image though, but than it's really the location of a certain number of pixels (not necessarily a string!).

Looking for automated way to test print PnP printer after install then delete

At times we test 20 to 30 printers in a day. I am looking for automated ways to increase the efficiency of this. I would like to simply have the printer install using PnP print a test page then delete itself after the test page or on removal. Are there any settings that can be changed on the computer to change the PnP process to make this possible. I am currently trying to learn and understand the Plug and play process so that I may find out how to get started. Any ideas would be greatly appreciated.
Thanks
This topic first appeared in the Spiceworks Community

Chris
I spent all day Googling and doing side by side comparisons of my old and new systems.
My display is a Dell U2410. It has several presets, including sRGB and Adobe RGB. I've been using sRGB.
On my OLD system, (Win XP, PsCS2, DwCS4) there seems to be no distinction between color managed and non color managed apps, even on this wide gamut display. I could capture (digital camera) in Adobe RGB, open and edit in PsCS2, save as .psd, convert to CMYK for print, or convert to sRGB for SFW. All images looked identical and they printed and displayed perfectly. I thought this was normal, and seemed logical. This also seems to be the source of my incorrect assumptions. I was trying to get my new machine to behave like my old one.
So I get this new machine (Windows 7, PsCS5, DwCS5) and now (still in sRGB display mode) all color managed apps appear de-saturated. Non color managed apps are OK. If I switch the display to Adobe RGB, color managed apps are OK, but non color managed apps are way too saturated. From my investigation, I believe this is normal behavior on a wide gamut display. I've tried changing the Control Panel > Display > Screen Resolution > Advanced settings > Color Management options, but to no avail. Either I'm missing something, or Windows 7 is doing color management differently.
It seems my only option now is to use Adobe RGB display setting for Ps, etc. and switch to sRGB for Dw and non color managed apps. Or, have 2 separate files for print and web. I've Googled 'til my eyes are numb and still not sure I'm getting this. Any enlightenment would be greatly appreciated.
Finally, I don't see an edit function here, so I can't remove my previous incorrect reply. Moderator, please feel free to do so.
Thanks

Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens. Haven't found any posts that relate, but I'm not sure how to ask the right question. To be clear, I want to write a helper VI to go through a list of subVIs to make sure the background images are all in the same place when their respective subVIs open. I hate manually playing with scroll bars before I save each of the VIs... I'm figuring I need to find the top/left location of the background image (know how to do this already) and then set a VI FP property to these values or some offset, but I can't find the relevant property. FP:run-timeposition:custom looked promissing, but only affects the location of the window, not the area of the front panel the window is displaying.
Solved!
Go to Solution.

Cool. Getting closer. The way I implemented your suggestion affects the subVI only if it is open. I can use this to do what I'm after, perhaps putting the code into each subVI. Maybe open all subs, run the helper, and save. Seems like I'm missing the elegant version...
My proof of concept code:

Looking for best way to filter status or meter data from differently formatted text.

With the product we design we are able to communicate via RS-232 ports. What I'm trying to do is filter out the data that is given by multiple differnt types of products that will give similar data back, but in a differnt format. Such that in a status command I'm looking for everything to be in a non failed state. But some items will show warning, failure, #.##w(for warning), or #.##f (for fail). But the format of each product is different. Also for a meter command I'm looking for a way to filter out just the numeric value for each phase amplitude, but once again the format will be different for each product. I have been able to pull this data out easy enough for an individual product but not on a wide product range with the same VI.

"Service is not available at this time
Try back later"
Bye...
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

I am looking for a way to develop a grammar checker for the web like spellcheckerplus can you help?

I am looking for a way to develop a grammar checker for the web like spellcheckerplus can you help? I have my own dictionary for comparing and replacing words.

Hi,
The forum is about install/uninstall .NET Framework, please post your issue to dev related forum instead of here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Looking for a way to monitor forums for a text string.

Hi as the subject says I'm looking for a way to monitor various forums for a list of text strings and give me a link to the post. I'm have tried googling but cant find anything specific enough I've tried looking at methabot but am unsure as to if this is the right sort of program, anyone with any experience or ideas in this area would be much appreciated.
thanks in advance.

you could write a daemon method which would, every so often, search the forums for the keyword.
Better yet, you can use google's "site: bbs.archlinux.org keyword format to do your search.
But, be sure not to do it too often. If you keep banging a particular forum website too often, your ip might get banned.

Looking for a way to directly choose keyboard layout.

I'm looking for a way to organise separated keyboard keys combinations (or single keys - the best) for every keyboard layout. I want to be able to choose layout directly. One unique key (keys combination) for each layout.
One way may be smth. like setting a key to execute a command:
setxkbmap -layout "us,ru"
and
setxkbmap -layout "ru,us"
For keys setup in OpenBox may be used obkey, for example.
In general it works. But in such a case, when not latin/english layout is the first one, or even single one, in the command's layout list, applications will not react on Ctrl-S, Ctrl-Z and so on. It do not depend on current layout, it depend on the first entry in last sequence to be used in the layouts list.
I'm shure there are some other better ways to implement the idea. Please, give me advise: what a tool, or tool set to study and use?

Stack wrote:
the sad clown wrote:
(just make sure that the changed layout doesn't break your keybind):
setxkbmap -rules xorg -model pc104 -layout us -option
Just change the layout parameters (and any other changes you need) for as many layouts as you want.
Unfortunately, if the single layout, or first in the list layout is not 'us', but my national, GUI applications will stop to react on Ctrl-S, Ctrl-Z and similar things.
Can it be fixed?
Is it that Ctrl-[S,Z] don't work or that they change locations because the keyboard layout has been modified? The first is a problem, the second is to be expected if you are changing the keyboard layout.
Stack wrote:
As I catch, for testing there is no difference between setxkbmap and xorg.conf. Also, there is no way to specify there layout specific switch combinations. In coma separated list of values for XKbOptions there is not binds to corresponding position in layouts list. All the combinations will do the same - cycle between layouts. http://www.xfree86.org/current/XKB-Config2.html#5
Layout itself and layout switching mechanics are too different objects (or classes) in terms of programming. I'm not shure I'll be on a right way, if I'll decide to dive deeply into syntax of '/usr/share/X11/xkb/rules/xorg' and '/usr/share/X11/xkb/symbols/*' (mentioned at https://wiki.archlinux.org/index.php/Co … _xorg.conf ) and hacking of ready to use layouts. If I'm searching for a way to switch them only. Am I right?
My suggestion isn't that you use the XkbOptions switch since this won't work for what you are asking. Instead, I'm recommending you use a little keyboard shortcut utility, xbindkeys and use that to issue the setxkbmap command I mentioned earlier. All you have to do is bind the shortcut to keys that don't change across keyboard layout changes (if you have a number pad, an easy solution is to use a modifier + one of these keys as it won't change). This isn't a toggle like the xorg.conf edit, but can switch to any layout you choose to bind in any order you choose to perform.

Looking for a way to reproduce this neat flip action in Edge Animate

Similar Messages

Maybe you are looking for