Looking for a way to search artists in Apple TV from iTunes Match?

Looking for a way to search artists in Apple TV from iTunes Match similar to searching for a movie in Netflix.

I'm not sure I understand. You access iTunes Match via the music section, there are different categories and you select artist to search through the artists in your music library.

Similar Messages

Looking for best way to filter status or meter data from differently formatted text.

With the product we design we are able to communicate via RS-232 ports. What I'm trying to do is filter out the data that is given by multiple differnt types of products that will give similar data back, but in a differnt format. Such that in a status command I'm looking for everything to be in a non failed state. But some items will show warning, failure, #.##w(for warning), or #.##f (for fail). But the format of each product is different. Also for a meter command I'm looking for a way to filter out just the numeric value for each phase amplitude, but once again the format will be different for each product. I have been able to pull this data out easy enough for an individual product but not on a wide product range with the same VI.

"Service is not available at this time
Try back later"
Bye...
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Looking for a way to pass parameter to external list from infopath

Hey, i have a Sharepoint 2010 list for which I want to create Infopath form. I have an external content type and external list based on it.
I want to prepopulate some fields in my Sharepoint list with data from external list. I tried to use external list as a secondary data source and query it for needed values. The issue I encounter is that my ECT has a finder with filter and I can't figure
out how to pass a value to this filter within infopath.
How can it be done with infopath? How can I pass the filter value to the external list using Infopath?

Hi,
According to your post, my understanding is that you wanted to pass parameter to external list from infopath.
You need to query the external list from InfoPath using coding and CAML Query.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/33575/filtering-sharepoint-external-list-bcs-from-infopath
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Looking for a way to increase the sildeshow size in iWeb

I'm looking for a way to increase the slide show size from the pictures page in iWeb. It looks like it iPhone sized. I have tried it on 4 different computer with the same result

There's really no easy way of doing so without post publication editing of some of the support files. There were other topics earlier on this subject but no one was able to do it .
You can use 3rd party java script slideshows instead of iWeb's. Examples of some are:
Jalbum - it has over 100 themes/skins to choose from and many will let you set the size of the slideshow image. An example can be see on this demo page: Jalbum Examples.
Other options are:
SimpleViewer and Flash Album Exporter
Flash Album Exporter Postcard and AutoViewer Slideshow Themes
The last two are from an iPhoto plugin.
OT

Looking for a way to install Windows Intune via powershell

I'm very new to Powershell and completely lost on how to do this.
Looking for a way to install Windows Intune via powershell from a self extracting zip file I will send to remote users. This will also need to run Corp admin level privileges to install.
Thank you in advance for your help.

Hi Mtirado,
For Windows Intune issue, I recommemd you can post in dedicated forum for more effective support:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsintune
If you get the initial Powershell script, and the script encounter error or problem, you can post back with current script and issue.
Thanks for your understanding.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Looking for a way to Export Still Image to iPhoto

Hi I'm looking for a way to export a still image from iMovie 08 to iPhoto 08? The simple drag, help, web search etc doesn't seem to come up with an answer but it's been a long day.
Thanks

Find the still within an event clip, right mouse, select add still frame to project. Repeat for all the stills you want.
In Finder under pictures, you should find files for all the stills you created. Import them into Iphoto and there you have it.
There is probably an easier way but this is not too bad.

Looking for a way to export full Popularity Trends data

Greetings!
I'm looking for a way to access all "popularity trends" data for a SharePoint 2013 publishing site in one place. I'm probably missing something pretty basic here, (I hope), but it seems if I pull up popularity trends for the site, all I get is
the hits & unique users for the site as a whole. If I go into my pages library and choose "Most Popular Items," I'm given a search results page that I can't run reports from. And if I select the "popularity trends" link under one of
those search results, I get a usage report for a single, specific page.
I've thought about doing a multi-select of pages from my site's Pages library, but I have more than 100 pages in the site, so I still can't get at everything all at once. Plus, the resulting usage.xlsx file just includes a lot of reports on individual
pages.
There's got to be something more all-encompassing than this...right?
Help!

Hi,
According to your post, my understanding is that you wanted to see the all popularity trends data for a site.
Where did you export the usage report?
Did you export the report from Popularity and Search Reports?
To view the Popularity Trends report for a site collection
Verify that the user account that is performing this procedure is a member of the Owners group.
In the site collection, on the Settings menu, click Site ettings.
On the Site Settings page, in the Site Collection Administration section, click Popularity and Search Reports.
On the View Usage Reports page, in the Usage Reports section, click Usage.
In the message box, click Open to open the report in Excel, or click Save or Save as to save the report.
Click the tabs to view the usage report for the different usage event types.
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Looking for a way to monitor forums for a text string.

Hi as the subject says I'm looking for a way to monitor various forums for a list of text strings and give me a link to the post. I'm have tried googling but cant find anything specific enough I've tried looking at methabot but am unsure as to if this is the right sort of program, anyone with any experience or ideas in this area would be much appreciated.
thanks in advance.

you could write a daemon method which would, every so often, search the forums for the keyword.
Better yet, you can use google's "site: bbs.archlinux.org keyword format to do your search.
But, be sure not to do it too often. If you keep banging a particular forum website too often, your ip might get banned.

Looking for a way to directly choose keyboard layout.

I'm looking for a way to organise separated keyboard keys combinations (or single keys - the best) for every keyboard layout. I want to be able to choose layout directly. One unique key (keys combination) for each layout.
One way may be smth. like setting a key to execute a command:
setxkbmap -layout "us,ru"
and
setxkbmap -layout "ru,us"
For keys setup in OpenBox may be used obkey, for example.
In general it works. But in such a case, when not latin/english layout is the first one, or even single one, in the command's layout list, applications will not react on Ctrl-S, Ctrl-Z and so on. It do not depend on current layout, it depend on the first entry in last sequence to be used in the layouts list.
I'm shure there are some other better ways to implement the idea. Please, give me advise: what a tool, or tool set to study and use?

Stack wrote:
the sad clown wrote:
(just make sure that the changed layout doesn't break your keybind):
setxkbmap -rules xorg -model pc104 -layout us -option
Just change the layout parameters (and any other changes you need) for as many layouts as you want.
Unfortunately, if the single layout, or first in the list layout is not 'us', but my national, GUI applications will stop to react on Ctrl-S, Ctrl-Z and similar things.
Can it be fixed?
Is it that Ctrl-[S,Z] don't work or that they change locations because the keyboard layout has been modified? The first is a problem, the second is to be expected if you are changing the keyboard layout.
Stack wrote:
As I catch, for testing there is no difference between setxkbmap and xorg.conf. Also, there is no way to specify there layout specific switch combinations. In coma separated list of values for XKbOptions there is not binds to corresponding position in layouts list. All the combinations will do the same - cycle between layouts. http://www.xfree86.org/current/XKB-Config2.html#5
Layout itself and layout switching mechanics are too different objects (or classes) in terms of programming. I'm not shure I'll be on a right way, if I'll decide to dive deeply into syntax of '/usr/share/X11/xkb/rules/xorg' and '/usr/share/X11/xkb/symbols/*' (mentioned at https://wiki.archlinux.org/index.php/Co … _xorg.conf ) and hacking of ready to use layouts. If I'm searching for a way to switch them only. Am I right?
My suggestion isn't that you use the XkbOptions switch since this won't work for what you are asking. Instead, I'm recommending you use a little keyboard shortcut utility, xbindkeys and use that to issue the setxkbmap command I mentioned earlier. All you have to do is bind the shortcut to keys that don't change across keyboard layout changes (if you have a number pad, an easy solution is to use a modifier + one of these keys as it won't change). This isn't a toggle like the xorg.conf edit, but can switch to any layout you choose to bind in any order you choose to perform.

Looking for a way to monitor continous queries

Hi, I am looking for a way to monitor my continous query cache such that i do not expose coherence libraries to the calling programs. So i need an abstraction of the listener and the returned value(in this case the MapEvent) so that the calling program does not have any knowledge of coherence behind the hoods. So, i need to do this in java(using the likes of observer/event listener etc) Any help in this regard is appreciated. Thanks.

you could write a daemon method which would, every so often, search the forums for the keyword.
Better yet, you can use google's "site: bbs.archlinux.org keyword format to do your search.
But, be sure not to do it too often. If you keep banging a particular forum website too often, your ip might get banned.

Looking for a way to broadcast a line in to the Airpot Express?

Looking for a way to run line input into my macbook and broadcast it to the Airport Express to Play on my Stereo..

It is discussed on the xfce forums but unfortunately that solution requires editing by hand. However it does seem relatively easy to automate. Writing a graphical program for those tasks is something you'd only have to do once.

Looking for a way to get built in audio to be heard out of AirTunes

Looking for a way to get built in audio to be heard out of AirTunes, not just iTunes.

thanks for the post, i downloaded that app but like i read, its really a worthless piece of junk, the 2 second delay yet alone i did not succeed to send my iChat audio to my airTunes speakers.

Hola a todos , busco una manera de crear un pdf desde la impresora de ios, como lo puedo resolver, gracias. Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

Try this process on your Mac. These files will be regenerated by Mac OS X with default settings.
1. Quit the Mac App Store
2. Trash the following folders and files; (~ is your Home folder)
~/Library/Caches/com.apple.appstore
~/Library/Caches/com.apple.storeagent
~/Library/Cookies/com.apple.appstore.plist
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
~/Library/Preferences/com.apple.streagent.plist.lockfile
Mac HD/Library/Preferences/SystemConfiguration/networkinterfaces.plist
3. Restart your Mac
4. Open the Mac App Store
5. Log into your MAS account

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter who on our network opens the design file.

The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Looking for a way to switch views using Javascript

Hi ! I'm currently studying Acrobat 3D. I've got a PDF document with a 3D Annotation, which was imported from a U3D file. I defined 3 views : "initial", "front" and "top". My problem is that I'm looking for a way to switch views using Javascript. In fact, when I list cameras using the following code, I only get one camera called "DefaultView". So my question is : where has my "initial", "front" and "top" views been ? Is there a way I can switch between them using Javascript ? for(i=1;i<scene.cameras.count;++i) { Cam = scene.cameras.getByIndex(i); console.println("camera " + i + " : " + Cam.name); } Thank you very much in advance. françois

Are the dates on these entries correct??!! Doesn't seem like it. Anyway, just in case, here's some code to help:
//=========================================================
backgrounder = new RenderEventHandler();
backgrounder.onEvent = function(event)
runtime.removeEventHandler(this);
canvas = event.canvas;
background = canvas.background;
keyer = new KeyEventHandler();
keyer.onEvent = function(event)
switch (event.characterCode)
case 49:
cam = scene.cameras.getByIndex( 0 );
canvas.setCamera( cam );
break;
case 50:
cam = scene.cameras.getByIndex( 2 );
canvas.setCamera( cam );
break;
case 51:
cam = scene.cameras.getByIndex( 3 );
canvas.setCamera( cam );
break;
runtime.addEventHandler( keyer );
runtime.addEventHandler(backgrounder);
//inform user
console.println("Use the 1,2,3 Keys to toggle between cameras");
//===============================================

Looking for a way to search artists in Apple TV from iTunes Match?

Similar Messages

Maybe you are looking for