Looking for add-on

I am looking for a certain add-on that I lost when I bought a new computer. It works like this: Place cursor over a word then press and hold the Cntl & Alt keys and click right on mouse. Shows definition of the word among other things.

I don't know which one you used, but there are quite a few add-ons that offer similar functionality such as:
* [https://addons.mozilla.org/en-US/firefox/addon/54959/ Quick Dictionary Lookup]
* [https://addons.mozilla.org/en-US/firefox/addon/1171/ Dictionary Tooltip]
* [https://addons.mozilla.org/en-US/firefox/addon/68/ DictionarySearch]
* [https://addons.mozilla.org/en-US/firefox/addon/45975/ clicknlearn]
* [https://addons.mozilla.org/en-US/firefox/addon/7675/ WikiLook]

Similar Messages

How can i show my music playing via itunes while im using MSN? i have ticked show what im listening to box and looked for add-ons....i have win7, up to date itunes and also MSN

hi there, i explained my problem in the discussion topic? any ideas?
Thankyou!!!!

Hi SDucky.!
I have an article here that should be able to help you troubleshoot this issue. The article is about finding lost media in iTunes and can be found here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Today I updated to Firefox 8. It installed, then started to look for add-ons. It never opened beyond this stage.

I have tried uninstalling and reinstalling but while i can see firefox.exe under processes, nothing else happens apart from very high CPU use. I also cannot open in safe mode & there are no reports under "%APPDATA%\Mozilla\Firefox\Crash Reports\submitted" I don't have Roboform or Trusteer.

It is possible that there is a problem with the file(s) that store the extensions registry. 
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache, extensions.rdf) and compatibility.ini in the [[Profiles|Firefox profile folder]] to reset the extensions registry.
New files will be created when required.
See "Corrupt extension files":
* http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
* https://support.mozilla.com/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Looking for help to add

In design mode of Dreamweaver 4 this is the view I have. I'm looking to add a border (cell padding) around each line item as it shows here:
Current view of page from design view above:
Appreciate insight

Are you really using DW 4 or do you mean CS4?
Hit F1 (help) Search for "Setting Table Properties."
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

For all of you looking to add additional language ...

First, to answer all of you out there like my self, who are looking for solutions to add extra languages to your phone such as chinese, spanish, french... etc...
1st simple answer is NO!! there are NO language pack you can download.
2nd, NO nokia will not install it for you even if u goto their customer service, and are willing to pay.
This is my story;
I brought a new E65 in less than a week ago, in australia. Like most of other nokia phones sold in australia it did not come with chinese. ALTHOUGH chinese australians are the 3rd largest ethnic group from English and Italian in Australia, on my phone i only have the option to choose from English, Malaysian, Philipino and Indonesian. As my previous phone is a nokia 6270 brought from hong kong (yes i was a loyal customer of nokia), half of my contacts and nearly all my SMSes are in Chinese. I seeked help from nokia. I first typed them e-mail which i received no reply. Then since i wasn't too far away from a nokia care center i also dropped by, and i was told "we can't do it, we simply don't have the software to do it, you could try calling the customer care center." So i did, and spent about 1hour on the phone talking firstly to a gentlemen and then the manager. I told her my problem and begged for help. As i am capable of reading and writing english i did not even ask for the phone to be fully transformed into a chinese version phone, but just to an extend that i will be able to read what i had (especially the name of my contacts). I must say, they were polite and did not have any attitudes, HOWEVER!!!! The only reply i got was, if the customer center could not do anything about it they can not either, they can not install a firmware from another region with chinese because there are licence issues. long word short... they were nice but helpless. We even brought up the possiblity of 3rd party softwares, however i've searched for 2 days and did not find any, which ended in the same way when she offered to search for a possible 3rd party software.
For those of you who do not know, YES it is possible to change the firmware your self and get the language u want!! HOWEVER!!! at the cost of loosing your warranty.
BUT unfortunatly for me nokia is tooo busy with its flag phone N95 and can not even be bothered to release a firmware for E65. So even when i am so despirate that i am ready to give up my 2 year warranty, I can not make my E65 capable of reading chinese.
So, i now have a USELESS E65 next to me. YES it is USELESS!!!!!!
For those of you who are looking for new phones and do have specific languages that you need, make sure u ask about the language FIRST!!! and if nokia does not have it, SONY ERICSON is probably a better choice as they install languages for you!!!
FINALLY if some of you nokia employees sees this, dont' delete this, because i am only telling a story of truth. AND if you really care, pls HELP US, and make language packs available, we are WILLING to PAY!!!! but HELP US!!!!! you have good phone design, nice customer service althought may not be helpful for this case, why let your self down on such a simple area.
Seed01001

i know sony (but i never really liked them other than their ear phones) does that... but with nokia i was told, all the nokia phones are market dependent. thus each region has set languages nokia has decided to release depended on the market for each specific phone. since they told me that its due to many reasons such as software licence issues.... if they could order in a phone with additional languages why can't they install one? because its essentially the same thing, because it means that nokia is distrubuting a phone with additional language then its original intension, i dont' mind if it takes 2 months for them to send my phone to china/hong kong and install chinese for me. maybe nokia has extra languages licenced in the UK..... all i was told from the sales i had was you could try 3rd party software...... which was not viable when i searched....Message Edited by seed01001 on 20-Jul-200703:41 AM

I'm looking for a software that allows me to add accessories or furniture items in the picture for interior design purposes. Is photoshop cc able to do this?

I'mI looking for a software that allows me to add accessories or furniture items in the picture for interior design purposes. Is photoshop cc able to do this?

photoshop is able to do it.. the question is if you are able to do it with photoshop.
it´s called compositing and if you want it too look real it depends on user experience if it´s a scuccess or not.

Looking for a way to add more signatures

I'm creating a form that has a standard orginator and approver signature blocks. Is there a button or another way to add additional approver signature blocks if needed? Any help on this would be greatly appreciated. Thanks!

Hi Catherine -
Depends on the type of signature block you are looking to add. If a secured digital signature, then those do not allow you to add in dynamically from what I see. If the signature block is just a holding spot for an ink signature then you could put in code to duplicate a subform that contains the signature block.
A work around for a digital signature is to create several signature blocks and make them hidden until a check box is selected, or something along those lines.
If ink signature blocks then put your signature block objects in a subform, call it "SigBlock" for example. Make sure the form is setup as dynamic, and set the subforms as flowed to avoid overwirting any info underneath. You could place a button that states something like "Click to add signature" and put this code under the CLICK event:
Page._SigBlock.addInstance(1);
xfa.form.recalculate(1);
If digital signatures then you'll want to embed Positioned subforms inside flowed subforms so that all materials flow, but the actual digital signature is in a fixed location. Be sure to set your FILE - FORM PROPERTIES - DEFAULTS to "Manually" on scripting and check the box titled "Enforce Strict Scoping". Then setup all your digital signature blocks, and when all formatted properly you could add in some hidden checkboxes that are set to CALCULATED, and have code under those that check status of a user checkbox to add signatures. If != 1, then the calculated field could tell the form to hide the signature block. If == 1 then the block unhides. Inside that block can be another user selected checkbox to add another signature, another hidden calculate field, etc. I would do this instead of setting up hidden properties in the form INITIALIZE setting since you may not want to hid those blocks everytime the form is loaded.
A tad complicated, but it works!
Jim

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference. Is there a plug in I need?

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

I am looking for an addon called Informer. used to fill in forms. new computer and can't find it in lists of add ons. thank you

looking for an add on called "Informer". new computer here and i can' t seem to find it anymore on list of addons. it is used to fill in forms and worked well.
thank you [email protected]

Sorry, I don't recall ever seeing an extension by that name. 
Maybe this one? 
https://addons.mozilla.org/en-US/firefox/addon/informenter/

Im looking for a way to add more information to the song tags.

Im not sure where to add the information im looking for. As an example i recently got the new smashing pumpkins 5 disc set. When ripped if shows which songs are from discs 1-5 and seperates them. Whats missing is the information corresponding to the fact that each of the 5 discs actually has its own disc name and not just disc number. is there a way to include this so it shows songs listed as Artist/album/album name/track name? For example, Smashing Pumpkins / Mellon Collie Deluxe Editon / Dawn to Dusk / Track name? I would just hate to lose this information to time in my library, and when a friend asks what disc its on i can just say its disc name. Thank you.

This might help you
http://www.mp3tag.de/en/

Looking for Rental add-on that can handle flexible return dates

Hi Forum,
I am wondering which would be good add-on for rental industry that can handle flexible return dates (without cancelling original contract and creating a new one with actual date).
I am wondering if Visnova's Rental add-on would handle flexible return dates without actually cancelling original contract and creating a new contract.
Are there many ways to handle flexible rental return dates?
Thanks.

Hi,
I have moved your thread here because you are looking for partner add-on instead of SAP add-on. Have you searched through this forum and SAP EcoHub ?
Thanks,
Gordon

Ads keep popping up, saying I have an extension called 'None Extension'. I looked for it in add-ons under extensions and plug-ins but I didn't find it.

I looked for an add-on I supposedly have on Firefox called 'None Extension' with no luck. Ad's continue popping up all the time, saying they're powered by this extension. Google won't show me anything about it either and I didn't find it under extensions or plug-ins in add-ons but I didn't find it. What should I do?

You can check for recently installed suspicious or unknown extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Looking for a virtual app that will allow me to take a photo then be able to add details

Looking for a virtual app that I can use in my event planning and designing that I can take a pic on my iPad and then design the pic to my personal needs?

"Motion 5" is your friend.
Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
Motion 5: cheap at $49.99 (just got my download two days ago)
Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

Looking for a way to log privilege adds even when the user has that priv

We've run into a situation where we want IDM to log privilege adds/removes, even when that privilege already exists (for add) or doesn't exist (for remove) on a person. Let me give some background.
We are a small team working on an IDM project, each team member with 6-30 months of experience with the IDM product. We're using 7.1.
We have two systems, one of which is queryable and (certain) privileges updatable via REST API -- we'll call this system REST. The second system of course is IDM.
When an IDM privilege is added or removed, the business requirement is to always keep IDM and REST in sync, privilege-wise. This is no problem and we have provisioning set up to make the API call, and it works great. However, if there is a problem with the REST API (network issue, just plain down, etc.) this sync can't happen. So, within the provisioning framework, if there is a failure, the failure is logged and the privilege is reverted, keeping REST and IDM synced. A job runs regularly to check this log table and re-attempt the appropriate action, which of course will trigger provisioning again, hopefully successfully.
The problem occurs in a situation like this, where each point comes in chronological order.
1. User X gets privilege Y granted within an IDM UI.
2. Provisioning triggers, but for some reason the REST API call fails (twice, because of retry).
3. The failure task for the REST API call removes privilege Y from user X. The error is logged.
4. After a while, some job runs which removes privilege Y from all users whose names begin with X. Even if the job explicitly removes privilege Y from user X, this is not logged in the system in any way, doesn't trigger provisioning, etc.
5. After another while, the "retry job" runs and attempts action #1 again. This time, the provisioning succeeds. Now user X has privilege Y on both IDM and REST. However, because of step 4, clearly user X should not have privilege Y.
The same (well, reverse) issue occurs when removing the priv in step 1 and doing a grant in step 4. During tests, one can just set up a To Identity Center step and remove/assign a privilege to an arbitrary person, then run the job containing this step repeatedly. If the action has no net effect, there's no record (in, for example, sentries, oentries, or indeed in mxi_(old)values). It would be great if there was a generic way to cause these actions to be logged, and we've actually thought of a couple other cases where this logging would be useful as well. Is there some simple way? Is it already logged in some esoteric table we haven't thought of?
Any thoughts on this interesting scenario would be appreciated. Thanks!

Hi Chris,
If I understand correctly, since you are using the log to ensure that the privileges are synced.
Any chance you could enhance step 4 to remove information about the failed assignment from the log, so that it will not be retried?
Note also, that this is improved in IdM7.2 and the framework. You will only get the privilege assigned after the add-member task has successfully assigned the privilege in the back-end system (which is what you are trying to achieve).
Best regard
John Erik Setsaas
Development Architect IdM

Looking for add-on

Similar Messages

Maybe you are looking for