Looking for alternative to restore bkf on recovery console

Did a backup (sytem files +registry) on xp utility & used it with success before my OS crashed. Now that it's crashed & inaccessible thru safe mode, I'm unable to restore my uncorrupted bkf on my recovery console cd . I can display the file with «dir» , but not getting the appropriate code to activate the restore process using the command, «batch dos_restore.cmd». I get the message that no file can be found. If the situation is a dead end (reinstallation option), is there a freeware (searched internet; no luck) like Stellar Phoenix bfk recovery  that I may have missed ?

Hello,Maritimer55!
If your iTunes is the lastest version for ipod?Did you try to reistall iTunes and downlown new one?
<Edited by Host>

Similar Messages

  • HT1339 I was looking for info on restoring an iPod Touch 4th Gen. But iTunes presents the same Restore button, which when pressed, offers to update, not restore, to iOS 6.0.1. Why?

    I found this article when searching for info on restoring (to factory conditions) an iPod Touch 4th Generation. Now I thought this shipped with iOS 5.x (x unknown). But as mentioned too briefly in the header, when I click 'Restore' in iTunes, it offers not to restore, but to update. That is not what I want. I need to use this iPod Touch with Xcode 4.2 under Snow Leopard.
    So the question is: what is really going on here and why? Is it really true that 4th G iPod Touches ship with 6.0.1 instead of 5.x? If not, how can I get it to really go back to the original? Why is iTunes failing to offer a restore when I press 'Restore'? If I guessed wrong about which of my several machines running iTunes (some under Windows7, one under Snow Leopard)I used when I upgraded to iOS 6.0.1, would that explain iTune's failure to offer a true Restore?

    Restore will not replace an old iOS level. It will update the iOS level to the latest level. If you have to restore youre iPod that is what will happen. The iOS is not a part of a backup.

  • Photo workflow in Preview- Looking for alternative app

    Hey all,
    I am struggling to view and delete unwanted photos quickly. I do a lot of wildlife photography and recently switched to Mac from Windows.
    I prefer to take lots of images and then go through, using the arrow pad to click through the, and delete any unwanted images, preferable just using the delete key. I don't like preview because it doesn't let me view even close to full screen while still allowing me to click to the next photo, doesn't allow me to zoom easily with the keys, and doesn't skip to the next image when I move one to the trash can. Basically, I am looking for a program similar to windows photo gallery and that I can work straight with the folder and not have to import the images first. Any suggestions on programs? Thank you for the help.
    Ryan Askren
    www.RyanAskren.com

    Any suggestions on programs?
    Possibly Graphic Converter.
    Any suggestions on programs?
    http://www.lemkesoft.com/index.html
    Matt

  • Looking for alternative to Web Start

    Hello all,
    After a couple years of using Java Web Start to deploy our educational software to schools, we're starting to realize that we need a new deployment strategy.
    h4. Here's what we're looking for:
    1. All files should be kept in OS-standard locations for applications, such as Program Files for Windows and Applications for Macs. Deployment of this program should be no harder for admins than for any other application. That means nothing in the User home folder.
    2. Can be installed directly from a CD or USB stick
    3. Can be easily updated as new versions are rolled out (i.e. can download the new jars from our servers).
    Does anyone know anything off the shelf that works like this?
    h4. Here are the problems with what we have now:
    1. Web Start deploys jars (by default) into Users' home folders. This causes the following problems:
    1a. Every user on the computer has to install the program individually.
    1b. System administrators don't have any tools or patters for large-scale deployment of programs into user's home folders.
    1c. Users may have limited space on their home folders.
    1d. Users' home folders may be on networked drives, meaning that all the jars need to be fetched over the network every time they run.
    1e. Users' home folders may be regularly cleaned.
    2. Although Web Start's cache folder can be changed, users may not have write access to those locations, so Web Start will not function for those users if they need to download new jars. While this may be ok for our software alone, it will break any other Web Start application. Web Start cannot have different caches for different applications.
    2b. Also, administrators don't have standard ways to deploy to random cache directories on computers.
    3. There is no easy way to install Web Start applications from CDs. Jar files have to go into the right folders as if they were being downloaded from a server. We have a way of doing this by starting up a Jetty server, but it is not very robust.
    ...however, we still want the ease of Web Start's updating. We want to be able to push out new versions, which admins could update and deploy to their schools the way they do for all other applications, and we also want to support rapid-release cycles for our researchers and people working on the cutting edge of our software. Preferably this would need to involve some kind of jar-differencing, as users should only have to download the smallest subset necessary.
    I'm sure we could write this ourselves, but I imagine we aren't the first people to have these kinds of requirements and problems with Web Start. Has anything been written that seems to approach what we want?
    Thanks,
    Sam

    If you're willing to pay, you might wish to try Denova's JExpress. http://www.denova.com/
    It creates proper installers and has autoupdate support. I've not tried it but it seems to be the off the shelf solution you're looking for.
    You might wish to roll your own by using the open source netx implementation of the jnlp protocol. The basic idea is that you create an installation exe for Windows and package for the Mac wrapped around the netx application. It's a bit fiddly but it does work (I've done this myself). For the time you spend doing this though, you'd probably be better off with JExpress.

  • Looking for ako "Layer restore brush"...

    Hi,
    I know that this function exists in Photoshop, although I haven't used it for a long time, but now I should and don't know how to manage it:
    I want to use a brush on a layer which copies pixels from the layer underneath.
    Does anybody know how to do this? Thanks for any hints,
    Thomas

    That's what I was looking for! Thanks, Mtstuner! I was not aware that the
    clone stamp works from different layers
    Have a great day,
    Thomas
    Am 8/31/11 10:23 PM schrieb "MTSTUNER" unter <[email protected]>:
    One way is to add a layer mask to the layer above the layer you want get the
    pixels from and paint on the layer mask with a black brush to reveal the layer
    underneath.
    Another way is to use the clone stamp tool and set current layer in the tool
    options
    bar and sample from one layer, then switch to the other layer and paint with
    the
    clone stamp tool.
    MTSTUNER
    >

  • Looking for alternatives to nethogs

    Hello, I'm looking for a network monitor in the same vein as nethogs but with actual functionality, like the ability to control the connections it sees instead of merely being able to watch. Things like killing the PIDs of the connections, refusing connections and limiting the bandwidth usage of connections if there is nothing like this in one neat package then the best ways to refuse and limit connections one by one on the fly, any suggestions? Thanks as always.

    Thanks for the lists, however they all seem to be limited to visualising also.
    If anyone is interested I did find trickle which handles the control/shaping side of things, so combine it with nethogs or any programs in the links above and you have what you need.

  • Looking for alternatives to the iTunes genius bar

    So since the new itunes removed the genius bar, which I had used regularly to find similar songs to ones I owned, does anybody know of an alternative of some sort. Beside Pandora as well

    Microsoft has two applications for backing up and restoring data. These applications are:
    Client-Based ; Windows Server Backup (in Windows Server 2008/2008 R2/2012) and Windows Backup and Restore (in Windows 7/8): These applications are client-base. They can only back up the systems that are installed on them. The storage capabilities
    of these apps are limited (for example, they cannot back up to tape or to cloud).
    Data Protection Manager (now in 2012 edition): DPM is a full feature, enterprise-class backup solution. It supports tapes for backup storage and now in DPM 2012 SP1, it can store backups to Windows Azure (cloud), as well.
    Hope this helps you!
    Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    I am looking to backup data to Amazon S3.

  • Looking for alternative to deprecated SortCriterion

    JDev 11.1.1.0.1 + ADF BC + ADF RC
    I have a requirement to be able to access the sort criterion of a rich table from the backing bean of the page that contains the table.
    Currently, I am using the following code I originally wrote in JDeveloper 10.1.3.4 to do so:
    SortCriterion criterion = (SortCriterion)getTechDataTable().getSortCriteria().get(0);
    String sortBy = criterion.getProperty();
    However, the oracle.adf.view.rich.model.SortCriterion object is apparently deprecated, and so is the org.apache.myfaces.trinidad.model.SortCriterion object.
    So, my question is, what alternative is available? As I understand it, objects aren't deprecated unless there is a viable alternative.
    Does anyone know the alternative to use in place of the deprecated oracle.adf.view.rich.model.SortCriterion?
    Thanks All and Happy New Years!

    Where did you find the info that org.apache.myfaces.trinidad.model.SortCriterion is deprecated?
    in the 1.2.11 API docs I found nothing about a deprication.
    For me it looks like you just can use org.apache.myfaces.trinidad.model.SortCriterion instead of oracle.adf.view.rich.model.SortCriterion.
    Timo

  • Looking for help to restore missing game on my nano 5G.

    I recently had to format my PC hard drive. It is now restored, but I have a little problem. I purchased a tetris game in 2007 from the itunes store. It still shows in my apple purchase history. But It does not sync to my Nano 5g. I purchased a game in Oct 09, and it synched just fine.
    Can you give me help on how to download this tetris game again, so that I can sync it to my nano. thanks

    Hello,Maritimer55!
    If your iTunes is the lastest version for ipod?Did you try to reistall iTunes and downlown new one?
    <Edited by Host>

  • Watching television broadcasts online - looking for alternatives to itunes

    Hello,
    How can I watch discovery channel, pbs, national geographic episodes online ? Is it only through purchasing past episodes through Itunes or is there another way ? Is there a service/software that will allow me to watch it as it's being broadcast on television ?
    Thank you,
    Raven Bruce

    Check out season passes in the TV section of the iTunes store. In my case, when I had cable, I always watched just a few TV shows on a few channels. If I buy season passes for only the TV shows I'm interested in that are available in the iTunes store it ends up being cheaper on an annual basis than paying for cable TV every month just to watch a handful of shows.
    The iTunes store usually always has a few pilots or other introductory TV shows available for free. Download some of the free stuff and watch them in iTunes or on your iPod, if you have one, and see if this is an alternative that suits you.
    iMac   Mac OS X (10.4.9)  

  • Looking for hp dv9810us vista 64 bit recovery disk. can anyone help please?

    I have searched my product for the recovery disks and HP should actually have them. But on the support/software page for my laptop they did not have the link. I also have a dv2 which is much older and was able to order the recovery disks. I am in serious need of the HP Pavilion Dv9810us Vista Home Premium 64 bit recovery disks if anyone can help.
    I dont understand something else either. The dv2 that I own also had upgrading to windows7 drivers and such on the product support page for my dv2. Odd that this dual core laptop that is much more advanced does not.

    DV9810us came with Vista 32bit I believe.I have the smaller 14.1" version(dv2810us) and it came with 32bit. Recovery Media is listed under Vista 32bit drivers/software:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3689​...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Looking for article "Backup::Restore"

    I am getting ready to start a backup system and trying to decide between the cloning style using SuperDuper or the archival system using Retrospect. Both have merits, if I don't catch an issue right away, SuperDuper will transfer it to my backup (making the backup useless) while Retrospect won't give me a bootable backup making disaster recover more of a challenge.
    In searching the forum I found a couple of references to an article by a user named Lee Cullins, but his .Mac account where he posted it is no longer active. Does anyone have the article? I would like to read it.
    Dual 2.66 Mac Pro   Mac OS X (10.4.8)   also have a 12 inch Powerbook

    I make my living backing up several TB worth of data each night. I can't help you with locating that article you want, but I can give you a couple of suggestions.
    First off though, what is your budget and how catostrophic would lost data be to you? The more important your data is, the more rigorous you will need to be with setting up a backup and disaster recovery policy.
    Backup and disaster recovery is all about mitigating risk, so its different for each person or organization.
    What I do with my PowerMac G5 at home is to have a second internal disk drive. The first drive is my primary boot drive. The second drive is a duplicate of the first. I only update the second drive after each OS upgrade, and only after testing the upgrade for a few days, at which time I will clone it again.
    I use Superduper for that purpose. I also have all my data sitting on an external Sygate firewire disk drive. If I lose both internal drives, all I need to do is connect my external disk drive to a different Mac if I need my data quickly. My data disk does not change that much in a typical day. What I do is simply clone my data disk (with SuperDuper) once a month to a second external disk drive. I then take my secondary external disk drive and store it outside my home for safe keeping.
    For my PowerMac G5 at work, I have a second internal drive for both data and the OS. I do not use any external disk drives on my Mac at work, but I do automated backups to tape of my Mac at work to a huge tape library that's located several blocks away from my office.
    On my MacBook Pro, I simply copy my files via my home Airport Extreme network to the external hard drive on my desktop Mac to back them up.
    What you end up doing depends on your budget, your needs, and your tollerance for disk. If you are running a mission critical server, you need to get a lot more elaborate with your backup strategy then what I do with my Macs.

  • Don't like Migration assistant - looking for alternatives

    on my new imac in the first go i used the setup assistant to migrate my macbook data from a time machine drive. this brought me a lot of things into the library that i didn't want to be there in a clean new system. even though i did not choose to migrate my former applications. the library mess led to a problem with installing adobe creative suit on the new system and i had to reinstall from the bundled software.
    this time i did not use the setup assistant to migrate any data and made a clean installation. no problems with adobe creative suite then. yet i have to fix itunes, iphoto, address book and mail manually. i want to copy as least library stuff as possible but of course want to have my music, my photos, etc. can someone advise how to do this step by step? thank you!

    I would be brilliant if we were allowed a checklist of all things wanted (or not) …
    That would take a lot more brilliance (& time) than most users seem to think … at least if it is to make reasonably certain everything needed is migrated! That's because not every application installs everything it needs into the Applications folder or uses Apple's installer to create a BOM (bill of materials) receipt record of what was installed where, nor do they all store all of their per user settings in the same place in a user's home folder.
    For instance, take a close look at your ~/Library folder. If you have installed many apps chances are good you have app support files not just in the Application Support folder but in other folders as well. Complicating things further, neither items in the Application Support folder nor elsewhere are necessarily named for the app they are associated with. In fact, some items are shared among several apps so if any of them are migrated, those items need to be included.
    Something similar applies in the system domain, mostly but not entirely in the root /Library folder.
    There is no way Migration Assistant can sort all this out so it offers the only reasonable choice, the all or nothing one.

  • RAM Slot Not Working for Macbook 2009 - Looking for Alternatives

    Tested RAM slots and found that the second slot (slot closest to interior of computer) is not working properly. Switched both 4gb cards in back slot and the computer would not start up, only would beep....definitely not faulty RAM cards because they both work in the first slot.
    I've researched this on forums briefly, the consensus seems to be logic board replacement.
    I really don't want to invest more money into this older computer - Macbook Pro mid-2009.
    Are there any other troubleshooting options here? I don't think it's the OS and do not have any Time Machine data set up before Mac X nor do I have an partitions set up on an external.
    The computer is not terribly slow but when using Final Cut Pro X it tends to lag. All of the specs for my computer fall in the recommendations for using with FC10
    Could I get an 8gb RAM card for slot 1?
    Any advice would be much appreciated.
    Thanks!

    Does not look like it supports 16 GBs of RAM meaning only 4 GBs/slot.

  • Looking for alternative formulas to suppress duplicates through Section Expert

    I'm using version 14.0.2.364 CR and having trouble building a customized treatment plan report for our case workers to manage to filter out duplicates. I'll do my best to give a layout and criteria:
    GH: CDCLIENT.SAI_ID    STAFF.SORT_NAME
    Case #
    First Name
    Last Name
    Home Phone
    DOB
    Tx Plan Start Date
    Tx Plan End Date
    CDCLIENT.CASE_NUM
    CDCLIENT.FIRST_NAME
    CDCLIENT.LAST_NAME
    CDCLIENT.PHONE
    CDCLIENT.DOB
    PLAN.BEG_DATE
    PLAN.END_DATE
    GF: CDCLIENT.SAI_ID    STAFF.SORT_NAME
    The problem is that when pulling data for each client, it will bring forward all their tx plans, but I just want to show the newest one. I was inclined to go to section expert > Select Details > Suppress (No Drill down) and in X-2, put the following:
    if {CDCLIENT.CASE_NUM} = next({CDCLIENT.CASE_NUM}) then true else false
    This will suppress duplicate records ONLY if I have this sorted by Case #. The problem is, we want to sort by Tx Plan End Date, so case workers can identify which clients are coming up for expiring tx plans. The way the data is stored, I have the first 5 columns from one table, and the last two in another. I also tried to format the field, go to "Commons" on CASE_NUM and choose Suppress (if Duplicated) in combination with the Section Expert, but it was still pulling both if I have it the sort order start at PLAN.END_DATE.
    Is there a way to preserve the most recent begin / end date and suppress any duplicates without sorting it by case #?

    Jamie Wiseman wrote:
    or in the case of your report use this as the suppression formula...sorry again about the original code.
    {AZCLPLAN.BEG_DATE} <> maximum ({AZCLPLAN.BEG_DATE}, {CDCLIENT.SAI_ID})
    The problem with this suppression is that for each Case Worker (Group) it is only pulling one client record forward, thus suppressing all other multiple unique clients associated with this caseworker.
    What my original report (before your suggestions is this):
    Case Manager Name (group CDCLIENT.SAI_ID)
    CDCLIENT.CASE_NUM
    CDCLIENT.FIRST_NAME
    CDCLIENT.LAST_NAME
    CDCLIENT.PHONE
    CDCLIENT.DOB
    PLAN.BEG_DATE
    PLAN.END_DATE
    1
    Client A
    Client A
    111-111-1111
    01/01/11
    01/01/2013
    01/01/2014
    2
    Client B
    Client B
    222-222-2222
    02/22/22
    02/02/2013
    02/02/2014
    3
    Client C
    Client C
    333-333-3333
    03/31/33
    03/03/2013
    03/03/2014
    1
    Client A
    Client A
    111-111-1111
    01/01/11
    01/01/2014
    01/01/2015
    4
    Client D
    Client D
    444-444-4444
    04/04/44
    04/04/2014
    04/04/2015
    Notice, it finds two records for Client A, because they are an existing client that needs continuous treatment. The caseworker doesn't need to see the older record for Client A, but also needs to see all other unique records.
    I basically want it to suppress the first row (older treatment plan) for Client A and have it display like this in conjunction with all other unique clients:
    Case Manager Name (group CDCLIENT.SAI_ID)
    CLIENT.CASE_NUM
    CDCLIENT.FIRST_NAME
    CDCLIENT.LAST_NAME
    CDCLIENT.PHONE
    CDCLIENT.DOB
    PLAN.BEG_DATE
    PLAN.END_DATE
    2
    Client B
    Client B
    222-222-2222
    02/22/22
    02/02/2013
    02/02/2014
    3
    Client C
    Client C
    333-333-3333
    03/31/33
    03/03/2013
    03/03/2014
    1
    Client A
    Client A
    111-111-1111
    01/01/11
    01/01/2014
    01/01/2015
    4
    Client D
    Client D
    444-444-4444
    04/04/44
    04/04/2014
    04/04/2015
    What your Section Expert + Summary Code did, was essentially this:
    Case Manager Name (group CDCLIENT.SAI_ID)
    CLIENT.CASE_NUM
    CDCLIENT.FIRST_NAME
    CDCLIENT.LAST_NAME
    CDCLIENT.PHONE
    CDCLIENT.DOB
    PLAN.BEG_DATE
    PLAN.END_DATE
    4
    Client D
    Client D
    444-444-4444
    04/04/44
    04/04/2014
    04/04/2015
    Maximum
    04/04/2015
    Let me know if this is possible.

Maybe you are looking for