Looking for an in-wall mount for integration with whole house audio

I would like to integrate my gen5 video iPod into my whole house audio system (Russound CAV6.6). Ideally, some in-wall bracket that mounts flush with the wall that I can wire into the audio system. Any suggestions?

How about this?
Sonance iPort
btabz

Similar Messages

Territory Management - Looking for integration with ERP Cost Centers

We are exploring using Territory management in CRM 7.0. However, the hierarchy structure is really the same as our cost center structure in ERP. The Business does not want to have to maintain this information twice. Is there some way to update one from the other? Or is there any integration between the two?

Milan,
When we were first looking at automation/customization with Initiatives, the challenge was how different each project plan was. With all the different layouts and formats that different project leaders used in different areas of the same company, it make it impossible to come up with some way of standardizing how to get the data into Initiatives. If you were looking at bringing in the data to a table first, that would certainly solve that format issue.
Initiatives aren't populated with data from PAS, instead they are created manually in the system. There are pop-up boxes involved as well. I need to do some further research into how you could best do this.
This would be a customization.
Regards.
Bob

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

Looking for Help with Hyperion to JAVA

I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

HT5731 How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad

SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)

SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
Controlling launch pad equipment via PXI/LabVIEW
Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
Cargo configuration of Dragon capsules going to resupply the International Space Station
Maintenance of Mission Control Centers with the help of our IT department
With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
Ideal candidates will have the following qualities:
CLD-level LabVIEW experience
A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
About the job:
Job is located in Hawthorne, CA in the Los Angeles area.
This is not a 9-5 job. There will be some late nights.
You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
We are only hiring full time employees. Contractors need not apply.
To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
Message Edited by Lavezza on 03-31-2010 03:59 PM

There is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
Look for the position called: Mission Control Software Engineers (LabVIEW).

I don't use Photoshop - looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting. Any suggestions?

I don't use Photoshop, I'm an Aperture guy.
I'm looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting.
I'm especially interested in the bending of the pixels, along the lines of impressionist paintings - think van Gogh.
Any suggestions?

If you are interested in computer simulated drawing and painting effects, have a look at the "ToonIt!" plug-in for Aperture. This will do some of the basic work for you, but you will have to do quite a lot of editing afterwards, to turn the image into a piece of art.
It might be easier, to do most of the drwing and painting yourself in the first place - ArtRage Deluxe is very versatile, if you have a large trackpad and pen.
For example: Applying a light ToonIt! effect "Impressionist2": The diagonal
cross-pattern is due to "Demo" mode - I have not yet bought the plug-in - it is rather expensive:
The original:

One question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to

one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TY

The History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/

Best Third party Fax Server for integration with SOA

Hi
Which is the best third party fax server for integration with SOA ??
I am having requirement to configure Fax for client..
Edited by: 910947 on Feb 16, 2012 4:12 AM

i am having following option
Using Java API like InterFAX
or
Using Fax Server like SilentFax or RightFax
or
Using Virtual Fax Server like GreenFax or myfax
Which is the best solution, i should go for that will best fit with my SOA Suite???

Class not registered. Looking for object with CLSID:

Hi,
I had create a custom project system with the help of https://msdn.microsoft.com/en-us/library/vstudio/cc512961.aspx. And which is working fine that I can create a project with extension of .myproj in the VS Experimental Instance window. But when I go for
the properties in the created project, (Solution Explorer: Right click on the project folder and select properties) it will show an exception that "Class not registered. Looking for object with CLSID:{00000-00-00-000000}" How can I provide Properties
window for this project system or can I modify the Properties window for any other default VS project system? Please help me.

Hi mathikp,
I don't think you did something wrong while creating the project, but instead it could be the issue of environment, I would suggest you to validate following things:
1, Try to create another blank app to see if the exception still thrown.
2, Run with an administrator privilege to check if you can get the project work..
I would not consider its as a coding issue but try to fix Visual Studio probably helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fortinet configuration with SCCM - just looking for experiences with it.

Just looking for experiences with Fortinet SSL gateway and managing clients with SCCM with it. I'm planning on building a lab area and selling management the idea of using Windows Defender and managing the 700 remote clients we have with our SCCM 2k7
R2 setup on Windows 7.
So if anyone has any experiences it would be handy. Or white papers would be awesome.
Trying to figure out an SSL gateway product with a path of least resistance that isn't Citrix.

Yes, I know this is an old post, but I’m trying to clean them up.
You will get more responses from Fortinet forums.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Looking for integration details of Kewill with Oracle Shipping execution

Hello Folks,
Has anyone done integration of Kewill (flagship) with Oracle Shipping 11i. Customer has plans to implement OTM later.
please provide me some details or documentation.
regards
girish
Edited by: 849679 on Apr 6, 2011 8:25 AM
Edited by: 849679 on Apr 6, 2011 9:02 AM

Pl do not post duplicate threads - Looking for documentation of Kewill Integration with Oracle Shipping
Srini

What is best practice for integration with freight forwarders?

Hello,
We are looking into the possibilities for automatically exchanging data with one of our freight forwarders. We will send them our shipment information and they will send back shipment status and date information including some additional information like the house bill. Sending the shipment data from our SAP (ECC 6) system is no issue, we have done that before. What is new to us is receiving back the status updates from the forwarder. Is there a kind of best practice of where to store this information on the shipment (or in a separate tabel) and what standard function module or BADI to use for this?
We are using ECC 6.0 sales and distribution, but no transportation management or SCM modules.
Would, like to hear the experiences of people who have done this type of intergration with their forwarders.
Regards,
Ed

SAP have added SAP TM 8.10 as a separate package which is also integrated with R/3 which means, a separate server is required if SAP TM needs to be implemented which will take care of your expectations. For more information on this, search in Google so that you will get couple of documentations on this topic.
G. Lakshmipathi

Mix of SAP Gateway and non SAP Gateway for Integration with SAP

Hello,
I am looking for a document on where SAP NW Gateway fits in as part of an integration overall strategy. So, for example, my understanding it is primarily for Mobile app integration. I hear some customers talking about using Gateway for what we normally think of as EAI core integration. So, it does not seem right to me in many typical SAP integration requirements would be handled via Gateway. Other traditional SAP integrations via PI or another ESB leveraging enterprise services, SAP API like BAPIs and IDOCS would be more appropriate in many non-mobile type situations.
Does anyone have general guidance on the above integration advice, thx

A good discussion..If I can add few things
1) PI REST Adapter is planned, should be available sometime in near future..
I do not think every integration scenario should be handled in Gateway (rather oData style) just because it can or it might work thinking. Doing it odata style means you need to re-write all functionalities as Web Based Services (eSOA anyone??)
2) Gateway (oData Services) - should be used in User to System scenario ( mobile, browser light weight type) , where you would want to transfer minimal data to the user and back
3) PI - System to System as you mentioned. e.g. Master Data/Customer Synchronization between ecc & crm etc. Doing them in oData style seems like overkill to me when you can use the IDOCs/ALEs and you do not need the data to be transferred over HTTP.
Both Gateway and PI are targeted for different scenarios and have their own place, and as such the right product should be evaluated carefully for each scenario.
Just my two cents.
Sandip

Looking for an in-wall mount for integration with whole house audio

Similar Messages

Maybe you are looking for