Looking for and Editable ADF drop down component
Hi,
I am looking for an ADF Faces/ Myfaces 'drop down' component that the user can select from if he finds the value in it OR alternatively type in/change the selected value.
Any close components will also be of help.
thanks for reading...
Hi User,
No such ADF Faces component exists - there are other solutions if you google around.
John
Similar Messages
-
i cannot find imported mailboxes. if i try to setup a new mailbox, it shows the existence of the mailboxes under location/on my mac. they do not show up in the mailbox list. where would they be located so that i can retrieve them?
Did you quite Mail and relaunch?
Your imported mail is stored in a new mailbox called “Import.” To reorganize imported messages, create new mailboxes and drag folders and messages from the Import mailbox to other mailboxes. When you’re done, you can delete the Import mailbox.
If you don’t see your mailboxes in Mail, choose View > Show Mailbox List; empty mailboxes aren’t imported. -
I have an Adobe Flash Professionals digital classroom book and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static, and input. Where is the TFL and Classic ? I watched adobe learning center but he was using CS5. Can anyone please help?
Hi,
Do you use Flash CS6 to follow the instructions in the classroom book? If yes, then you can find it under text drop down for an AS3 Document as shown below
If you follow the instruction in Flash CC or Flash CC2014 then you will not find this option as this is deprecated.
Thanks!
Mohan -
My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?
Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful. -
Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.
Without proper system information and the application logs nobody can tell you much.
Troubleshoot Creative Cloud download and install issues
Mylenium -
How do you find a notification for Ask to Buy for Family Sharing once it is off your screen and not in drop down Notification Center?
Welcome to the Apple Community.
I don't believe you can. -
I am trying to download Adobe Reader for the new Firefox and it says to look for the "edit options" box. I can not find one and am stuck
== This happened ==
Just once or twice
== I tried to download Adobe ReaderThe instructions on the Adobe site for Firefox are out-of-date and only apply to older versions of Firefox. You have the most current version of Adobe Reader (ver. 9.3.2) shown in your plug-ins. For future reference, use the instructions below for updating or installing Adobe Reader. You can see your version in Tools > Add-ons > Plugins, look for "Adobe PDF Plug-In".
<u>'''Install/Update Adobe Reader for Firefox'''</u>: your ver. 9.3.2; current ver. 9.3.2
Check your version here: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
-'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
-See the images at the bottom left of this post to see the steps to take on the Adobe site
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
Firefox_<u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
<u>'''Update Java'''</u>: your ver. 1.6.0.17; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
(Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
Check your version here: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
<u>'''Install/Update Adobe Flash Player for _</u>: your ver. 10.0 r42; current ver. 10.1 r53 ('''important security update 2010-06-10''')
Check your version here: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND__''~~ [[How do I edit options to add Adobe to the list of allowed sites]] -
I have my Launch Video ready and the "share" drop down is gray so no ability to send it anywhere. What is this? I went on to update the computer for other reasons, now Safari 6.0.2 asit interfered with downloads; and from OS X basic to Mtn Lion 10.8.2.
Make sure your Project has the focus. You cannot Share an Event.
-
I edited my Drop Down Menu, yet the changes arent reflected online
Hi everyone,
I created a website for a friend, and I used Drop Down Menus
for a image category. Now, I went back into the behaviors palette
in DW, and I edited the name of one of the items in the menu. But
when i uploaded my file back online, none of the changes took
place, and this was in 5 different files. Here's the site:
http://www.helenbwilson.com/
If you click on the "Portfolio" button, a drop down menu
should come out—but instead of saying "Godot and Mul." it
should only say "Godot". Can anyone tell me what I did wrong?
I already re-uploaded my "mm_menu.js" file back online. Is
there another file Im missing?
Any help would be greatly appreciated.
Thanks everyone
-PsyThe mm_menu.js file is not controlling it.
It is the JavaScript on the page:
function mmLoadMenus() {
After you make the changes you will need to upload the pages
you made the changes on.
BTW you might want to consider another option for that menu:
http://www.projectseven.com/tutorials/navigation/snapmenus/index.htm
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"psypent81" <[email protected]> wrote in
message news:f04058$55s$[email protected]..
> Hi everyone,
>
> I created a website for a friend, and I used Drop Down
Menus for a image
> category. Now, I went back into the behaviors palette in
DW, and I edited the
> name of one of the items in the menu. But when i
uploaded my file back online,
> none of the changes took place, and this was in 5
different files. Here's the
> site:
>
>
http://www.helenbwilson.com/
>
> If you click on the "Portfolio" button, a drop down menu
should come out?but
> instead of saying "Godot and Mul." it should only say
"Godot". Can anyone tell
> me what I did wrong?
>
> I already re-uploaded my "mm_menu.js" file back online.
Is there another file
> Im missing?
>
> Any help would be greatly appreciated.
> Thanks everyone
>
> -Psy
> -
Looping through collection of symbols and populating a drop down on a form EXTENDSCRIPT
Hello everyone-
I got a question. Would it be possible to run a script that would loop through a collection of symbols in a defined library and populate a drop down with the available symbols. My goal is to be able to open Illustrator, and when I run the script the dropdown is populated with all available symbols(text is fine) in a defined library that I can then select and place on the artboard. Any help would be appreciated.
thanks in advance!So...
Dim appref As New Illustrator.Application
Dim docRef As Illustrator.Document 'The work document
Dim docToAdd As Illustrator.Document 'The document which contain the symbol's library
Dim pathArt As Object
Dim ItemSymbol As Object
Dim itemSymbolref As Illustrator.Symbol
Dim artObject As Variant
appref.Open ("C:\..... workDoc.ai")
Set docRef = appref.ActiveDocument 'Assign docRef to your work document
appref.Open ("C:\......symbolDoc.ai")
Set docToAdd = appref.ActiveDocument 'Assign docToAdd to your symbol document
Set symbolref = appref.ActiveDocument.Symbols(Symbol_Name) 'Assign symbol ref the symbol you're looking for
Set itemref = appref.ActiveDocument.SymbolItems.Add(symbolref) 'Copy it on the current active page
itemref.Selected = True 'select it
docToAdd.Copy 'add it to your clibboard
docToAdd.close (aiDoNotSaveChanges) 'Close the library, without changing anything
appref.ActiveDocument.Paste 'Paste the clipboard on your work document
'As soon as you paste the symbol, it will be added in the document symbol library
Clipboard_Clear 'See below why...
SelectedObjects =appref.ActiveDocuments.selection ' Select the symbol you past
' The loop is not necessary if you have only one thing selected
For Each artObject In selectedObjects
artObject.Delete
Next
' Cleanup your pointers
Set artObject = Nothing
Set pathArt = Nothing
Set docToAdd = Nothing
[....] Continue your script on your working document
Set docRef = Nothing 'after closing your working doc...
Remark on clipboard_clear : If you don't do it, the risk is to accumulate plenty other things you don't want...
Public Function ClipBoard_Clear()
Call OpenClipboard(0&)
Call EmptyClipboard
Call CloseClipboard
End Function
With
Public Declare PtrSafe Function OpenClipboard Lib "user32" (ByVal hWnd As Long) As Long
Public Declare PtrSafe Function CloseClipboard Lib "user32" () As Long
Public Declare PtrSafe Function EmptyClipboard Lib "user32" () As Long
be careful I use the PtrSafe pointer due to the fact I'm working in x64 architecture
in x86 it will be
Public Declare Function OpenClipboard Lib "user32" (ByVal hWnd As Long) As Long
Public Declare Function CloseClipboard Lib "user32" () As Long
Public Declare Function EmptyClipboard Lib "user32" () As Long
Regards to all
Michel -
I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
I ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
Thanks,
TonyI ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
Thanks,
Tony -
How to display Current Year and Month in Drop Down list
Hi Dear friends,
I am devloping a report. It has got 2 pages--input and output(Report) page.
IN input page, user will select Month and Year from drop down list as one of the input parameters. (seperate drop down list 4 month and year)
Now, my problem is:
HOw to display current month and year by default in the dropdown list...........
I hope my question is clear.
Please help.
Regards,
AShNO da,
it is not working.
First i tired with for-loop. I initialized variable "i" to -2 (i=-2) I would get the year drop down list from 2003 but, by default 2003 would come.
So, i posted the question.
I tried your code. It is giving following error.
A Servlet Exception Has Occurred
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occured between lines: 122 and 127 in the jsp file: /test/inpt.jsp
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:182: Invalid type expression.
first.set(Calendar.YEAR, 2003)
^
An error occured between lines: 127 and 131 in the jsp file: /test/inpt.jsp
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:186: Invalid declaration.
out.write("\r\n \r\nYear : \r\n \r\n"); ^ An error occured between lines: 198 and 203 in the jsp file: /test/inpt.jsp Generated servlet error: C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:282: Invalid type expression. first1.set(Calendar.YEAR, 2003) ^ An error occured between lines: 203 and 207 in the jsp file: /test/inpt.jsp Generated servlet error: C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:286: Invalid declaration. out.write("\r\n \r\nYear :\r\n \r\n");
^
4 errors
Pls. Help.
Regards,
Ashu -
Can I copy and paste a drop down list into another field?
Can I copy and paste a drop down list into another field?
You don't have to create a PDF, but it would be helpful to know what, exactly, you want to do with the ppt.
You can export as a PDF which will keep vectors and text as PostScript (crisp) elements.
You can also Save As from ppt in a variety of formats such as PNG or TIFF.
These rasterize all the vectors and text, but are very useful if you're laying out a miniature gallery of the powerpoint presentation.
However, if you want to make the InDesign file a replica of the ppt slides for print, PDF is probably the best way to go. -
I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
Replication of a data source from multiple logical systems
Hi experts, In our ERP wie run many different clients with correspondong logical systems. When I'm changing a data source in ERP, then I have to replicate this datasource for each single logical system. My question : Is there a way to replicate a dat
-
I have a question that is about making a link with Vendor and Contract Hierarchy. First it is not clear how I can set the Vendor Hierarchy, I want to upload vendors from R/3 and for that I can create a vendor group and then upload but then how I can
-
Had photos in Photos App, took picture with Camera--All disappeared
This happened in the last two weeks. Once I was able to have the photo albums go back to the iphone. Now, the second time this has happened, can not get the chosen albums in iTunes to sync to the iphone 3gs w/ 3.1.3 Is it me? Or is it the OS
-
Garageband doesn't "hear" input from microphone... help!
hey, i'm running a mic into a mixer, and running the mixer signal into my ibook with imic... I've modified the "sound" input area of my system preferences for the imic's usb sound input and chosen input and output volumes. having done that, i can see
-
Forecasting Models in Demantra
Hi All, Does any one tried with only enabling certain models in Demantra. In business modeler, I enabled only regression in model library and ran the engine. I compared with demantra forecast with all the models checked. There is no change in demantr