Looking for any migration resource for migrating CF9 to CF11.

The CF11 FAQ mentions "migration resources" and has a link but when you follow it, it doesn't take you to any migration documents.

>
bohamo wrote:
> We are migrating from XIB to SAP PI 7.11. Does anyone have any links to any "Migration guides" or "Best practices" for a migration like that and/or migration to SAP PI in general?
>
> I have scanned SDN but with no luck unfortunately.
>
> Thanks in advance
I'm so interested to your question...

Similar Messages

Updgrade CF9 to CF11

Hi,
Running Windows server 2008 and CF 9.
I'm trying to update CF9 Standard to CF 11 standard.
I've downloaded the trail version.
I run the installer and then the migration wizard runs.
But after that, the site is still running under CF 9. I know this because if I stop the CF9 process, the site goes down.
There must be some other files I am supposed to modify or move but I can't figure out what they are.
I do notice when I go into IIS 7, there are handlers set up for both CF9 and CF11 -- I can tell this by looking at the file paths to the various handlers.
Where is the 'hook' that ties CF into my web pages? That is what seems to not be working. The 'hook' is tying my web pages into CF9 and not CF11
I've been trying this for about a week now and still no luck. Very frustrating.
Help would be much appreciated.
Thanks
Mike

Hi, Mike. The “hook” in CF9 is the wildcard handler mapping which connect “* paths to a jrun dll. The “hook” in CF10 is isapi filter (IIS feature separate from handler mappings) that causes all requests to be passed to a tomcat dll (isapi_redirect.dll). Then both also have handler mappings for cfm, cfc, etc that also pass to the respective DLLs for each engine.
You have two alternatives to consider:
- one is that you could try to manually remove all the handler mappings for CF9 and that should do it. But then the problem is you may not look at all the places they exist (which could be at the server and site levels, depending on how you or others before you configured things—and those who try to do it via manually tweaking the IIS config files could also be fail as the info may be in multiple places there.)
- but the easiest solution, generally, if you’re saying you no longer want to run CF9 with your IIS sites at all, is to the run the CF9 web server configuration tool and use its “remove” option to remove the settings in IIS that are connecting it to CF9. BE sure to right-click and use “run as administrator”.
That said, if folks HAVE manually tweaked those IIS config files, or HAD previously run the tool (when “adding” sites) without running as admin, then you may find that even doing this removal is not sufficient to get things working, as vestiges of CF9 config lines remain (among the possibly multiple config files, at the server and site levels.)
It can all get rather messy, especially because the CF9 config tool (and CF installer) did their mods to the config files differently, copying ALL handler mappings from the server level into the site level.
But give the removal a try. That works I’d say 9 out of 10 times. If you’re in the 10 percentile where it is not enough, I’d say that if the above info is not enough for you to get it fixed, you’d be wise to have someone experienced in this (like myself) work with you remotely to quickly understand and resolve things.
But if the above is enough to get you going, great.
/charlie

I have a new MacBook Air. When I first got it, I migrated some of my files from my PC to the MacBook Air with no issues. Now, I',m trying to migrate more documents, music, etc. and migration assistant won't get past "Looking for Other Computers." Why?

I have new MacBook Air. When I first got it, I migrated some of my files from my PC to the MacBook Air without any problems. Now I'm trying to migrate more files, music, etc. and I keep getting the continuous spining circle with "Looking for Other Computers." I've tried everything and for some reason it is not finding my PC. What am I doing wrong?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Mac OS X Lion Migration Assistant "looking for other computers"

I just installed Mac OS X Lion from Snow Leopard. I actually did a clean install and during the setup, I attempted to use the Migration Assistant to transfer my Time Machine Backup, saved on a Time Capsule, but after selecting to transfer from my Time Machine, it shows my Time Capsule but continuously is 'looking for other computers". The drive shows at the top and I'm able to click continue, even while it still searches, but once I click continue, i put in my Time Capsules passowrd, it continues to search and i can no longer click continue. It never stops searching.
I found article how to fix this in Snow Leopard http://support.apple.com/kb/HT3253?viewlocale=en_US but the setting are different in the Security tab in the Preferences. There is no 'Allow all incoming computers'. I have tried both with firewall on and off and neither way works.
Let me know if you have a fix for this, as I have 250 gbs waiting on my Time Capsule to be imported.
Thanks,

SImilar problem here, migrating from an old MacBook Air to a new one (directly, not via backup).
During the new Mac's initial setup, I followed all the steps properly as instructed (and made sure the original machine's Firewall was off). I tried both my main WiFi network and an ad hoc network, with Internet Sharing. (Ad hoc proved VERY finnicky to even get a connection. Miserable--it would work or it wouldn't, and I had no power over it: it would fail on the same config where it would succeed. A shame, because ad hoc would be the ideal, low-interference way to get the fastest WiFi transfer. And it's a method Apple's support site even suggests.)
No matter what I did, both machines just stuck at "Looking for other computers" forever. I spent hours trying to get it to work. I wasn't going to buy an ethernet adapter, nor a new external HD (with some third-party backup software as a workaround) just so I could power on my new Mac and have my stuff on it.
Eventually I gave up, installed without migrating, and then ran Migration Assistant after the fact. That DID connect OK (took about 1 hour per 10 GB and was done by morning).
But doing it that way was a mess: there was NO warning when I did the initial setup that I should not use my own name as the main account if I planned to migrate later. Who knew? I couldn't migrate after the fact because I had the same name on both machines. Well.... of course! Don't most people keep the same name? It's as though you're not expected to ever buy another Mac unless you're a newlywed woman. (None of which would be an issue if migration would happen during initial setup as it should.)
So I had to create a superfluous extra account with admin privileges, run Migration Assistant from there, replace the redundantly-named new account, and then find and delete the redundant account where it was stashed during migration. Lastly, I deleted the superfluous admin account as well. THREE accounts needed to be involved, for a process ANY Mac-to-Mac buyer will face. There was nothing special about my migration.
I don't think most users could even figure out all these steps.
A loyal Air user buying a new Air should not be such an incredible hassle. It "just doesn't work."

Trying to use Migration Assistant to restore from Time Machine backup but it keeps "Looking for other computers..."

Hi!
I just bought a new MacBook Pro 15" and I wanted to transfer my old files from a previous Time Machine backup done with my old MacBook Pro 15".
Both computers have Mac OS X 10.8.2 (Mountain Lion) installed.
I always used Migration Assistant without any problem to accomplish this task, but now I don't know why it's stuck on a screen displaying "Looking for other computers...". What? What computer? I'm trying to restore from a Time Machine backup on an external hard drive, so I don't understand what computer it is looking for.
Do you have any idea to solve the problem?
Thanks!

At the screen in Migration Assistant titled "Select a Migration Method," select From a Time Machine backup or other disk.
How to use Migration Assistant to transfer files from another Mac

Laptop keeps looking for previous migration machine at start up

Every time I start my machine it keeps looking for my previous laptop which was used to migrate my information. This slows the start up down considerably. It seems to think that this is a server I want to connect to by default and says it is not, understandably, available.
Is there any way to stop this? Thanks

frank120 wrote:
I started in Safe Mode and the problem didn't happen, which was good. However when I returned to normal mode it was back again. I have a Time Capsule which mounts whenever I start up so I also tried starting in normal mode without the wi-fi on to take this out of the equation, but again the machine was still looking for the missing machine.
Since it will startup in safe mode, that tells you that there is some third party software that is attempting to startup in normal that is causing the problem. So now that you know that, you are going to have to start looking at what third party software is causing your problems.
|___________________
Allan

Migration Assistant on MB Pro never stops looking for the PB G4 with Panthe

Hi,
I bought a Macbook Pro 13 inch to add to my PB G4 12 inch running OS X 10.3.9. When I selected migrate data from another Mac and tried to follow the instructions for migrating over airport it doesn't work.
I installed the update for airport sharing from the MBP's dvd and the old PB connects to the MBP but the MBP never stops "looking for computers".
I've also tried connecting through my router's network and with an ethernet cable.
I don't yet have a cable that can do Firewire 800 to Firewire 400. (I never realized the ports were different )
I tried turning off the firewall on the PB G4, turning on Appletalk on both Macs. Some articles talk about turning on Bonjour (can't find that on the new Mac and on the old one I think it's called rendezvous for iChat.)
I found this article http://support.apple.com/kb/HT1554?viewlocale=en_US#faq13
and this http://support.apple.com/kb/HT3253
and this http://support.apple.com/kb/HT3322
But I'm lost for trying to make this work before my new Firewire cable is delivered.
Does anyone have any suggestions?
Thanks!

Marlinespike:
I think you may have missed the ads see this page http://store.apple.com/us/browse/home/shopmac/family/macbookpro?mco=NzUyMzg0
I make a habit of missing ads by not watching TV, not readng the newspaper, listening to NPR and using AdBlocker in Firefox. However, thanks for updating my information. I use Mactracker for info, but apparently they have not yet updated their data.
at this point I can't get either computer to even recognize the other one even when both are connected to each other by airport computer to computer network or through the router. I don't know if they're seeing each other when directly connected by ethernet.
Are you using FileSharing in System Preferences? I don't do much networking so I may not be up on the technology, but when I have used it I set up FileSharing on both computers.
I loathe having to reset all my internet connections and I was hoping to avoid having to do the manual drag and copy
I was advised, when I was in your situation, that Migration Assistant is not the most effective way to update the new computer. Take a look at the advice I got in this thread.
Sorry about the firewire cable. I have several laying around here, wish I could link on to this post
cornelius

Looking for an iPad(iPad/Mac) app that allows for playlists to migrate to iPad

I am specifially and exclusively looking for recommendations for an iPad(iPad/Mac) app that allows for my playlists to be migrated to iPad intact and playable.
iTunes -> Podcast/Music/Videos does not support mixed (music/video/podcast) playlits or video playlist at all. The app(s) should be able to easily create these playlist on the Mac (and manage content) much like iTunes (10).
On the phone with tech support today and they agree this is missing functionality from Apple. They suggested I reach out on to other users that may have a thrid party solution.

Requires each device/user have an unique Apple ID(verifiable email address):
http://itunes.apple.com/us/app/find-my-friends/id466122094?mt=8
Otherwise you can use Find My Phone, but requires logging in for each separate user. Find My Friends(built by Apple) will show everyone's location on one device.

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the base for my new macbook ?

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the basis for my new macbook ?
The old OS was Mac X 10.5.8. I think the new one is 10.7.2 Lion.

Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
Stefan

HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply!

My new mac is stuck on "looking for source" in Migration Assistant.

My new MacBook Pro arrived today and I am so excited to finally have a new Laptop. I made it through the startup process okay, until i made it to the screen that says "Transfer information to this Mac." My previous laptop was a windows 7 HP brand laptop, so on the previous screen I had selected Transfer "From a windows PC". Then the screen read "looking for source" and it had said it for quite a while before I clicked the back button a couple of times to quit out. Also, I am a college student living on campus so I referred back to the packet that IT gave all the students at the beginning of the year to set up the wifi on my new Mac. I had problems setting up the wifi so I visited IT and they set it up for me. Then after I came back from IT I tried the Migration Assistant again. And unfortunately it is not working and my Mac is still on that same screen

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

HT2518 migration is stuck on looking for other computers....

I am a brand new MAC user. I'm trying to transfer files, etc. from my PC to my new MAC. I am in "Migration" on Mac, have downloaded the software to do so on my PC, networks are both on, file sharing is on my PC...but on MAC I am stuck on "looking for Other Computers". What do I do. I am clueless with MAC as I am a totally brand new user, some things I find our self explanatory, but others I have no idea! I downloaded manual but it does not give troubleshooting as far as I can see.

Hello
try this
put your tow imac side by side then plug an ethernet cable between us , ethernet logo look like that
then on each imac desable wifi ( air-port )
go to system preferences -> network , you should see somthing like that
select from Configure IPv4 to MANUALY on both imac , then fill info for ehternet exactly as folow
for 1st Imac
for 2d Imac
then try launch again migration assistant , or use file sharing options on old imac
HTH
Pierre

I am looking for support migrating Eudora 6.2.4 to Thunderbird

I have been hanging on to an antiquated Eudora email program (6.2.4) for far too long because I did not know how to migrate it, all of the settings, address book, filters, folders, etc. to Thunderbird. As a result I'm still running Mac OS 10.4.11. I am looking for support making the transition.
<sub>E-mail removed by forum moderator for your protection -M</sub>

well you have waited to long for current versions, so your going to have to install an old version and then upgrade it as some of the Eudora stuff is missing from current versions.
Start with V3, as that was the last major profile shake up and a good starting point to upgrade to and from as it was the basis of eudora OSE.
I have some instructions on the FTP site [http://thunderbirdtweaks.blogspot.com.au/2011/07/i-want-old-version-of-thunderbird.html here]
Once the import has completed and your happy with things upgrade to the latest version by downloading it and simply running the installer.

Looking for Third Party SAP Data Migration Tools

Hi all,
I don't know if this is the right place but I was wondering if anyone can provide me a list or a link of the different third party SAP Data Migration Tools. I am specifically looking for productions that migrate data from one SAP system to another.
Thanks and I hope to hear from you.
Regards

Hi,
Just to weight out my options and compare the diffrent products as a research of sort.
For SAP tools they use LSMW I believe but I want to check the alternatives.
Regards

Looking for any migration resource for migrating CF9 to CF11.

Similar Messages

Maybe you are looking for