Looking for best way to filter status or meter data from differently formatted text.

With the product we design we are able to communicate via RS-232 ports. What I'm trying to do is filter out the data that is given by multiple differnt types of products that will give similar data back, but in a differnt format. Such that in a status command I'm looking for everything to be in a non failed state. But some items will show warning, failure, #.##w(for warning), or #.##f (for fail). But the format of each product is different. Also for a meter command I'm looking for a way to filter out just the numeric value for each phase amplitude, but once again the format will be different for each product. I have been able to pull this data out easy enough for an individual product but not on a wide product range with the same VI.

"Service is not available at this time
Try back later"
Bye...
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Similar Messages

Looking for a way to export full Popularity Trends data

Greetings!
I'm looking for a way to access all "popularity trends" data for a SharePoint 2013 publishing site in one place. I'm probably missing something pretty basic here, (I hope), but it seems if I pull up popularity trends for the site, all I get is
the hits & unique users for the site as a whole. If I go into my pages library and choose "Most Popular Items," I'm given a search results page that I can't run reports from. And if I select the "popularity trends" link under one of
those search results, I get a usage report for a single, specific page.
I've thought about doing a multi-select of pages from my site's Pages library, but I have more than 100 pages in the site, so I still can't get at everything all at once. Plus, the resulting usage.xlsx file just includes a lot of reports on individual
pages.
There's got to be something more all-encompassing than this...right?
Help!

Hi,
According to your post, my understanding is that you wanted to see the all popularity trends data for a site.
Where did you export the usage report?
Did you export the report from Popularity and Search Reports?
To view the Popularity Trends report for a site collection
Verify that the user account that is performing this procedure is a member of the Owners group.
In the site collection, on the Settings menu, click Site ettings.
On the Site Settings page, in the Site Collection Administration section, click Popularity and Search Reports.
On the View Usage Reports page, in the Usage Reports section, click Usage.
In the message box, click Open to open the report in Excel, or click Save or Save as to save the report.
Click the tabs to view the usage report for the different usage event types.
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Looking for a way to search artists in Apple TV from iTunes Match?

Looking for a way to search artists in Apple TV from iTunes Match similar to searching for a movie in Netflix.

I'm not sure I understand. You access iTunes Match via the music section, there are different categories and you select artist to search through the artists in your music library.

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

Migrating from PPC Macs to Intel Macs:
https://discussions.apple.com/docs/DOC-2295
How to use Migration Assistant:
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

Looking for a way to filter or hide entry in a column

Hi,
I'm looking for a way to display only 1 entry in a column from a table who contain more than 100 entry in static report mode.
Thanks in advance for you help !
Edited by: 844999 on 2011-03-21 12:50

I'm not sure I understand, you have a row that has over a hundred columns? or one column with hundreds of data in the column? how are they delimited?
can you explain it with more detail?
Edited by: NAZDEV on Mar 21, 2011 2:48 PM

Looking for a FM to download entirely PO/CTR data from R/3

Hi all gurus,
as told in subject, I'm looking for a way to dowload all the data of a contract or a purchase order into a local file on my client.
For those who are familiar with SRM, there's a transaction, BBP_PD, which - given a contract or po number - offers all the data of the documents splitted into corresponding DB tables, e.g:
- for what concerns the header: BBP_PDHGP, CRMD_ORDERADM_H and so on...
- for what concerns the items: BBP_PDIGP, CRMD_ORDERADM_I etc....
Now, assuming I'm dealing with a certain R/3 document and that this backend doesn't support versioning ( = there's only a single version for each document), how can I export - say in an EXCEL/csv file - all the data of that document splitted into corresponding tables?
Is there something standard? I could code such a report but I actually don't know all the DB tables involved in Contract/PO creation/modification but only the major ones, like EKKO, EKPO, ESLL, ESKL... I'm sure I will miss some information. Moreover, not all the links which connect the tables are straightforward and clear to rebuild.
Of course, a getdetail() is not a solution as the sensation is that it doesn't extract everything but only the relevant data.
Thanks in advance.

Hi,
If you want to know absolutely ALL the tables that are related to a purchase order you can execute transaction SARA. It will give you the list of all the tables related to a particular object. For purchase order use MM_EKKO in the initial screen and press 'DB Tables'. The complete listing is this:
A068, A081, A082, A215, ADR10, ADR11, ADR12, ADR13, ADR2, ADR3, ADR4, ADR5, ADR6, ADR7, ADR8, ADR9, ADRCOMC, ADRCT, ADRG, ADRGP, ADRT, ADRU, ADRV, ADRVP, AUSP, CDCLS, CDHDR, CDPOS_STR, CDPOS_UID, CMFK, CMFP, DJEST, EIKP, EIPO, EKAB, EKBE, EKBEH, EKBZ, EKBZH, EKEH, EKEK, EKES, EKET, EKETH, EKKN, EKKO, EKPA, EKPO, EKPV, EKUB, EREV, ESKL, ESKN, ESLH, ESLL, ESSR, ESUC, ESUH, FPLA, FPLT, IBADDR, IBIB, IBIBOBS, IBIBT, IBIN, IBINDOMAINS, IBINOBS, IBINOWN, IBINT, IBINTX, IBINVALUES, IBSP, IBST, IBSTREF, IBSYMBOL, INOB, JCDO, JCDS, JEST, JSTO, KAPOL, KOCLU, KONH, KONM, KONP, KONW, KSSK, MLBE, MLBECR, MLWERE, NAST, RESB, S111, STXB, STXH, STXL
Of course, there may be tables you are not interested in such as pricing (konm, konp, know, konh), adresses (ADR*), sapscript texts (STXH, stxl), messages (NAST), etc..

What is the best way to transfer all of my data from my iPod touch 3rd generation to my iPhone 4s?

I have a 3rd generation iPod touch, and now I am getting an iPhone 4s. What is the best way to transfer all of my data, including paid-for apps and music, from the iPod to the iPhone without losing anything? Can I just do it through iTunes or the iCloud? I have never used iCloud before.

Follow the directions here:
http://support.apple.com/kb/HT2109

Looking for best way to edit 29.97 and 25 fps footage together.

Hi everyone.
I've looked on the boards, but haven't found exactly what I'm looking for.. any help is appreciated.
I'm starting a job shot in Argentina, and they shot both 25fps and 29.97fps. I believe they used DSLR cameras.
I think the delivery format is web only, but am awaiting final word.
Questions-
Do I need to convert the footage to one frame rate, or will PPro handle the different rates in the same timeline without the footage looking awkward?
Can I just have PPro interpret the media as a different frame rate?
If I need to convert, would you please recommend best software?
Would you recommend converting to 29.97 or 25?
Thanks all. Much appreciated.
Michael

I am inclined to say edit 25fps and then the dropped frames of the 29.97 should not look too bad with most footage. You mileage may vary. It really depends on the footage. It could make it look choppy. But maybe better than 25 played at 29.97 using frame blending to make new frames out of thin air.
Create your 25fps sequence from the 25fps footage. Then when you drop the 29.97 on it, it will automatically drop the frames necessary to make it 25fps.
If, however, you are going to write it to DVD, you want to do that in the PAL or NTSC settings you would normally use for wherever it is that you live.
By the way, if you interpret the 29.97 as 25 it will play back slower. Slightly slow motion. If you interpret the 25 as 29.97 it will appear fast. Once again, it depends on the footage. If you shot objects (like travel stuff), then speed is not a huge deal, but if you shot people or animals it could make a huge difference.

Looking for best way to set up multiple iPhone accounts

I already have an iPhone. Planning on getting one for my wife. I need to know the best way to setup both phones on my computer. We have separate Windows accounts on our home computer. I currently have an iTunes account on my Windows user account with some apps and the music library - with some, but not a lot of purchased music.
We also both use separate Outlook accounts for Calendar, Contacts, etc.
Should I:
- Sync both phones on my iTunes account? I imagine that would allow us to share any purchased music and apps. If so, can I point her phone to sync to her Outlook account?
- Set up a new iTunes account on her Windows account? I would import my music into her library, but I would guess that she would not be able to share my purchased music or apps
- Do something else?
Please let me know the best approach. Thanks.

Keep your separate logins, itunes accounts, outlook, etc., you can still share itunes content, as permitted under the EUSLA.
Launch itunes under your WIFE"S computer login. Disable auto sync when an ipod/iphone is connected, under preferences(under the edit menu), in itunes. Log your WIFE out of her itunes account, log in using YOUR account details, connect YOUR phone, DO NOT SYNC. Go up to Store>Authorize This Computer. Then, File>Transfer Purchases. Once complete, EJECT YOUR phone. Log out of itunes, log your WIFE back in. Connect HER phone, select what content you want on HER phone, hit the sync button. She likewise can transfer purchases to your account, thus you both can share content. All updates to Apps must be done using the same account originally used to obtain them. Log in, update, log out.

Looking for best way to convert 35 mm slides to digital images

Hello Apple Community,
Am researching best ways to convert several hundred 35 mm slides into digital images. There are numerous scanners/converters out there but want to ensure I get the best unit compatable with my iMac (27 inch, Late 2009). Any suggestions welcome.

For scanning 35mm slides you need a scanner with a good photometric resolution and geometric resolution.
For the photometric resolution: Get a scanner with a high density range (D-max) value, to get a good resolution of highlights and shadows.
For the geometric resolution - sharpness and detail - try to get at least 3200 dp,i to be able to get good 8"x10" prints from your scanned slides, a higher dpi value, if you want to be able to print larger images.

Looking for a way to pass parameter to external list from infopath

Hey, i have a Sharepoint 2010 list for which I want to create Infopath form. I have an external content type and external list based on it.
I want to prepopulate some fields in my Sharepoint list with data from external list. I tried to use external list as a secondary data source and query it for needed values. The issue I encounter is that my ECT has a finder with filter and I can't figure
out how to pass a value to this filter within infopath.
How can it be done with infopath? How can I pass the filter value to the external list using Infopath?

Hi,
According to your post, my understanding is that you wanted to pass parameter to external list from infopath.
You need to query the external list from InfoPath using coding and CAML Query.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/33575/filtering-sharepoint-external-list-bcs-from-infopath
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

What is the best way to move all of my data from an iPad 4 to an air?

Santa brought an iPad Air and I need to transfer my data and apps from the old iPad I have had. Help on the best way to do this since I played with the new machine yesterday and some of the things transfered but not all.
Thanks!

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
 Cheers, Tom

SSIS 2014 - Best way to use parameters to extract data from sources

Hi,
Is there any way besides SQL COMMAND FROM VARIABLE that I could use to extract data from Oracle \ SQL Server tables that filters the amount of data?
For instance, I want to extract in all sources data beyond 2007 so I wanted to use this year as a parameter in all OLEDB sources I will be using.
Thank you

Hi Pedro,
Based on my research, the Microsoft OLE DB provider for Oracle and Oracle Provider for OLEDB does not allow parameterized queries in OLE DB Source. So the best method to achieve your requirement is still using SQL COMMAND FROM VARIABLE option as Data access
mode.
Considering construct your query in a variable which you can include your parameter dynamically with another variable and set the variable properties "EvaluateAsExpression" to true. In the Expression Property set the value to:
"select * from test
where Col1='" + (DT_WSTR,100) @[User::para] +"'"
The following two similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/97f23ef5-35ac-466e-87d9-69edac2525f9/ssis-oledb-source-problem
https://social.msdn.microsoft.com/forums/sqlserver/en-US/32a70752-adab-4180-8b6d-f6100b3e356c/pass-variable-for-ole-db-source-with-connection-to-oracle
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Looking for best way to select a list of components

I have a button that checks user input to make sure it's the right format.
I want this button to extend a debugger type window... I was wondering if there was a class that someone could recommend to me.
Inside the window being extended I want there to be a table with columns labeled "Error Message", "Input", "At", "ReplaceWith". The first three will be disabled text fields, but the fourth one i want to hold a textfield with a button... Any recommendations as to how to most efficiently implement a selectable row of components would be greatly appreciated. Thanks.

i could always just fake a table via a class
extending a JPanel with all the data in it & just
have an array of this class & throw those into a
bigger JPanel... if anyone knows of a better, cleaner
way to do this, please let me know.Possibly better to use JDialog with a JTable rather than JPanel since my guess is that you want to present this information in a modal way (though I could be wrong).

Looking for best way to test for a program

I like test path better. My problem is through all the different versions of office they cant all install to the same directory. Research time.

I'm writing a script that will automatically install Outlook 2010 if Office 2013, 2010, 2007, or 2003 are not installed. It's part of a script I already have each tech has to run locally due to management decisions(that I have no control over). Right now I prompt the tech if they want to install it. Then test for the installer and install it.
PowershellDo{$outlook = read-host "Would you like to install Outlook 2010? y/n" IF ($outlook -eq "y") { If (Test-Path -Path C:\Update\outlook2010) { saps -filepath C:\update\outlook2010\setup.exe -wait } Else { Write-host "Outlook is not in the update folder!" -ForegroundColor Red } }ElseIF ($outlook -eq "n") { Write-Host "Please make sure there is an email client." -ForegroundColor Yellow }}While ('y','n' -notcontains $outlook)What I would like to do is remove the prompt as it's a volume license...
This topic first appeared in the Spiceworks Community

Looking for best way to filter status or meter data from differently formatted text.

Similar Messages

Maybe you are looking for