Looking for beta test sites

We are looking for beta test sites for our first BEA product - a
non-repudiable audit log and transaction rules engine for Tuxedo. We
need customers running Tux 7.1 on Solaris. If you are interested please
email me.
Thanks.
Mike Frank
Product Line Manager
PentaSafe Security Technologies
713-523-1992 x1336
[email protected]

You know, it might have been cool to spam us with your project here if it were something cool for Java developers. Just because it's written in Java doesn't mean I want to see it here on a forum intended for Java developers. And I don't think Sun wants to run a de-facto bug tracker for n-type here on this forum.
I can understand your excitement in your project coming to fruition, but Sourceforge has more than the needed resources for you. Try emailing this guy. Try posting on Freshmeat. We're not your marketing department or your focus group, though.
Good luck with your project.

Similar Messages

Looking for Beta tester for a Mobile Fault Notifier for CW

Pardon the interuption. We are working on finishing a Mobile Fault Notifier for Blackberry and iPhone handhelds and need some help with the beta testing. If you are interested in putting our pre GA version through its paces in the field please go here for more details about functionality and requirements.
http://mimirsoftware.com/dfmbbabeta.html
Thanks,
Richard
Mimir Software

may i?

Looking for beta testers for Nutsmail's new i:theme

Hello all. Nutsmail is about to release new skins/themes made especially for Snow Leopard Server. We're looking for a certain number of beta testers for this product.
All in interested please get in touch with us via the contact form on the Nutsmail site at http://nutsmail.com/contact.html
Please specify your interest in beta testing the i:themes.
Looking forward to hearing from you.

Hello again. I forgot to mention that these will be skins/themes for Squirrelmail running on OSX server.
Here are some screenshots so you can see what they look like:
http://nutsmail.com/screenshots/iSkin1.png
http://nutsmail.com/screenshots/iSkin2.png
http://nutsmail.com/screenshots/login1.png
http://nutsmail.com/screenshots/login2.png
http://nutsmail.com/screenshots/login1.png
http://nutsmail.com/screenshots/login3.png
http://nutsmail.com/screenshots/login4.png
If you are interested in beta testing please get in touch with us via the contact form on the Nutsmail site at http://nutsmail.com/contact.html

Registration for Beta Test of Nokia Ovi Suite rele...

Hi all!
We are especially looking for Nokia N900 and MS Outlook 2010 users. We will tell more about the new features and improvements in Nokia Ovi Suite 2.2 when the testing starts.
Please register here
Best Regards,
Kale from Nokia Ovi Suite Beta Test team

Hi scavenger9
You wrote 'Quite irritating to not being able to use pcsuite unlike my current 5800 XpressMusic and 6220 Classic."
Is it the problem that after installing NOS you are unable to run pcsuite?
have you tried to uninstall/ reinstall NOS? have you got same problem?
Could you please provide more information on this?
1. which version of pcsuite and Ovisuite are you using?
System Information details ( Help About- Ovi Suite- System Information )
2. Device details ( type *#0000#)
3. Connection type (USB/BT)
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Thanks for Beta testing the iPhone. Let me know when you're happy with it.

I am so happy that Fresno was sold out of iPhones the day I went to buy one. Since then, I have been reading about all the problems the phones are having, and I'm glad I didn't get one. I am a loyal Mac user and look forward to owning an iPhone. I'm just glad there are people like you willing to beta test for Apple, and help them work out all the bugs. When you can hear the phone, visit flash websites, watch internet movies, and use a yahoo account successfully, sign me up. Until then, thanks for you hard work and patience.

You are 100% correct in calling this a Beta version.
I was a Q/A engineer for Intuit and Srint gave us
phone to Beta test for them when they first came out.
I have to say it was hard to find a funtion with a
"bug" in it. Wheras it is hard to find a feature in
the I-Phone that is bug free. I would have to say the
Weather feature works well... Its those other seldom
used features like the phone, calendar, contacts, and
it web are still in step one beta!! And foget aobut
support... I am still waiting on a return call from
engineering for 5 days now.
Why would Sprint/Intuit give you the iPhone to test? It isn't even on their network much less a CDMA phone.

Sharepoint 2013 setup for a test site

In a sharepoint 2013 test site that I am using, I would like to be able to follow the section called 'deploy a workflow soltuion' that is located in the following url:
http://msdn.microsoft.com/en-us/library/jj819316(v=office.15).aspx.
When I look at the 'upload solution picture', I see the tabs for browse, solutions, and library. However when I look at my test sharepoint 2013 website, I see the tabs for browse and page. I do not see 'solutions' and 'library' tabs. Thus can you tell
me if my test sharepoint website is setup incorrectly or is this a permission is? Would you tell me what I can do to solve my issue?

Hi Wendy,
Do you have administrative rights on the site. Only site administrator can upload the solution to solution gallery and activate that solution.
Best Regards,
Brij K

CLAD with MS in Electronics/Electrical engg looking for better opportunities

Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf ‏130 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

Looking for Thumbnail Menu site Guro for Hire

Hello,
I'm looking for a flash guru who can create a web site for my
IT staffing company. I'm looking for a site that is thumbnail/menu
driven. I created our current site in Flash but the new look I'm
going for is a bit to complicated for myself.
We are interested in having a company create a working
thumbnail/menu template and I will fill in the photography, text
and any flash modification. Here's a good example of thumbnail
driven site:
http://www.wynnresorts.com
click on their Las Vegas site.
Thanks!!!

Hi,
Have a look on this site...
http://www.1pointsize.com/home.html
If you want more details reg this , just send a PM to
me....

Looking for Printer Test program

I'm trying to find an ABAP program that will let me test out whether we have printers defined in SAP correctly. Ideally the functionality I'm looking for would be an ABAP program that when run would display a list of all the printers defined in SPAD and then allow me to select one or more of them, and then print a page to each of the selected printers that would show stuff like: the name of the printer, the description, the type, etc, as well as instructions to mail or fax the output back to a contact. The contact info could be hard-coded, or it could be defaulted with override capabilities.
I had a program similar to this at another client, but it didn't do exactly what I wanted, but it sure came in handy testing out printers as you added them during a GoLive or office move.
Any suggestions would be greatly appreciated.

eRain makes Swfit3D (a stand alone app) as well as plug-ins
for MAX and LightWave:
http://www.erain.com/...a bit
more money than you've suggested though...
Poser also has Flash support, but I've never used it so I
can't vouch for it:
http://www.e-frontier.com/article/articleview/1597/1/281?sbss=281
Hope that gives you some help!

Looking for interMedia web sites using text retrieval

I'm looking for web sites which use interMedia to support their site search function. My goal is to evaluate intermMedia for use as a full text search engine.
I'm particularly interested in sites which use the thesaurus features.
Thanks.

There are many sites on the Internet that use interMedia Text for site search and for catalog search.
While we don't track which Oracle customers use particular components of the database such as interMedia, here are a few good examples for you to try :-
oracle.com - of course
myCNN.com - CNN's personalized news service
bol.com - on-line books, music etc.
- Steve B.
null

Looking for better "transitions" plug ins

Hi, I just bought the Photoshop elements and premiere Elements 9 package. Problem is that I am a simple guy who makes a lot of video movies for my work and I just want a very simple "fade in" type transitions to merge my video clips. The ones supplied are to "busy" and are a distraction in my humble opinion. I didn't feel I should have to Up grade or purchase this one simple fade or "cross fade" after spending my $150.00 I did Google free transitions and found the Burgers page that had exactly the transition I was looking for. http://http://www.burgers-transition-site.de/downloads/transitions/transitioncrossfade.htm l
I down loaded it and tried to add it to my existing library of transitions but it couldn't read the codex? How can I get this simple transition without spend more money? Thank you, Greg McCord

The standard disslove or cross fade that comes with PE9 I would thought would achieve what you want.
You can either have it before or after the break line or equally straddling it.
Simply insert a break line and just drag the effect to the break line.
There is another way that you don't need any 'effects' but gives you complete control of the transition.
When you want the audio to fade differently to the video I put a break in the video and drag the after part up to the second video track and drag it a little earlier by the length of the fade or disslove.
Then right clicking on the clip I select fade in and out on the top track and modify the yellow lines in the tracks to get the right timing.
Example. You want to remove a complete sentence in an interview. You insert a dots in the lower audio yellow line and quickly fade out the audio before the transition starts to remove the first word of the unwanted sentence but leave a bit of video. Then dissolve or wipe to the next sentence to signify that you have deleted something rather than have a jump cut.
If you look at some of my finished timelines it looks like a castle with every scene alternating on tracks 1 & 2.

Looking for beta testers...

I'm looking for some players to test a 2-player strategy game. The gameplay is similar to chess, except that you construct an army from a selection of units with a variety of stats and abilities.
The game requires at least 2 players to be online to play. To assist in finding opponents, I'm scheduling official play times, but feel free to play at any time.
The web address is www.catluck.com/leopold
The official play times (PST) are
10-11am, 2-3pm, 7-8pm, 10-11pm

from what i saw of your app it seems pretty good, but i took up the whole screen it didnt have its own window, have you thought of making it so it just has its own window ?? is there a one player option ?

Looking for some test emails....

In particular I want to test parsing an email where the Message is an inline attachment of some sort. I can't seem to create an email with any of my clients that is an inline attachment. Seems like they are always Parts. Is there any place I can find some emails for testing?
Thanks,
Michael

I'm not sure exactly what sort of message you're
looking for. You can easily create a message
with another message as an attachment using
JavaMail. You can also do the same using
Thunderbird (select "forward messages as
attachments" instead of "inline").
An attached message always appears as the
content of a Part of type message/rfc822. The
getContent method of such a Part will return
a MimeMessage object.
See the JavaMail FAQ for more on forwarding messages.

Giving your UUID away for beta testing.

Are there any reasons not to provide your UUID in order for others to beta test your app?
What does the UUID enable for someone else that they can then run your app? I always see the UUID blocked out in examples as if it is a security concern.

I see people do the same thing with license plates on auto related forums. Since it uniquely identifies that one device I guess there is a possibility that somehow, somewhere someone could use it to impersonate the device. I use the UDID to identify devices for a Web Service I have built. I have security measures in place so that it would be very difficult for someone to impersonate my client software however so UDID spoofing is really not an issue for my application.

Table to look for the test object information

Hello everybody,
I am working on solution manager and i was wondering if there were a way to get the informations i had directly in tables using the SE16 transaction. So my question is the following: is there a way to extract data like test plan, status text, test object, test instructions, user, date, time from SAP tables. Thank you in advance for your answer.
Best Regards

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

Looking for beta test sites

Similar Messages

Maybe you are looking for