Looking for bios version 1.7 for K8N Neo4 FI - plz help, it's urgent

i bought myself a new K8N Neo4 FI yesterday together with a msi nx6600gt and an A64 3200+ Venice e6 and when i booted up the bios said i had 1gb of ram @ ddr266 in single channel mode. i tried to set it to 200mhz ddr but it wouldn't go so i installed win xp anyway and when i tried to run 3dmark i got artifacts all over. someone suggested that i downgrade to 1.8 so i did and my artifact probs went away so now i still have to deal with my memory and for that someone else suggested to me that i downgrade to 1.7 until the next bios comes out so i tried looking for version 1.7 and after about 4 hours of searching i still have nothing to show for it. can someone plz plz plz tell me where i can find it???

Not to mention if you're gonna buy a 2nd power supply, why not buy one good enough to feed all of that hardware. Good reliable brand name PSUs aren't as costly as some might think, it's actually a rather cheap price to pay for peace of mind.
As for knowing if it will solve your problem or not, we can't garantee, you might have more than one problem in your system. The PSU is definitely a problem, but there is no garantee everything will suddenly fall into place after you change it.

Similar Messages

Hello everybody. Anybody knows link for latest version of Need for speed for OSx?

Hello everybody. Anybody knows link for latest version of Need for speed for OSx?

sig wrote:
Dispassionate cluelessness: Several years ago a little something called “Google” rained down from the sky. This Google provides the means for finding answers to many, many questions. I’m routinely amazed at how helpful people can be when others need assistance, but it’s unwise to abuse their patience by clamoring for increasing amounts of help when the answer you seek is a simple Google search away.
I always put that down to the UI
User Incompetence

Update for bios version 52kt30AUS - Lenovo Ideacentre K-210

Is there an update for this bios.

jbegnaud0163 wrote:
link is no longer valid
Try this link.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/idea...
*** The message thread you replied to is an old discussion. My link to the BIOS update is for a newer BIOS version that was released after this discussion started.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

I have account member ACC15015.for intersection of N0_version,No_Scenario,No_Entity I WNAT TO CAOP THIS aCC15015 DATA TO EACH SCENARIO,EACH VERSION AND LEV 0 MEMBER OF ENTITY.PLZ HELP ME

i have account member ACC15015.for intersection of N0_version,No_Scenario I,No_Entity I have some data for this intersectionNOW I WANT TO CYOP THIS aCC15015 DATA TO EACH SCENARIO,EACH VERSION AND LEV 0 MEMBER OF ENTITY.
WHAT IS THE SSCRIPT FOR THIS
PLZ HELP ME

I guess my first question is why? One of the beauties of Essbase is the efficient way it stores the data. If you are using this for a calculation, you can just reference the intersection where the data exists. Bloating your database by creating blocks for all of these intersections is counter-productive.

How to write code for this logic, plz help me very urgent

Hi All,
i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
here i m giving my logic, can anybody send me the code related to this logic.
this is very urgent .
this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list if user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
fields of zfibue:
serailno = numc
bukrs = char
matnr = char
prdha = char
hkont = char
gsber = char
wrbtr = char
budat = date
credate = date
cretime = time
processed= char
processedon = date
processedby = char
mapped = char      are   belongs to above type data types
and seelct-optionfields: s_bukrs for bseg-bukrs
                                    s_hkont for bseg-hkont,
                                     s_budat for bkpf-budat,
                                     s_processed for zfibue-processed,
                                      s_processedon for zfibue-processedon,
                                      s_mapped. for zfibue-mapped
parameters: p_chk1 as checkbox,
                  p_chk2 as checkbox.
                  p_filepath type rlgrap-filename.
1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: Invalid input for Company Code.
1.2 Fetch SERIALNO, BUKRS, MATNR, PRDHA, HKONT, GSBER, WRBTR, BUDAT, CREDATE, CRETIME, PROCESSED, PROCESSEDON, PROCESSEDBY, MAPPED from table ZFIBUE into internal table GT_ZFIBUE where BUKRS IN S_BUKRS, HKONT IN S_HKONT, BUDAT IN S_BUDAT, PROCESSED IN S_PROCESSED, PROCESSEDON IN S_PROCESSEDON, and MAPPED IN S_MAPPED.
1.3 If P_CHK2 = X, go to step 1.11. Else continue.
1.4 If P_CHK1 = X, continue. Else go to step 1.9
1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
1.7 Loop through GT_ZFIBUE where PRDHA = blank.
          Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
          IF sy-subrc = 0.
                 Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
              Modify Table GT_ZFIBUE. Update Product Hierarchy
             Endif.
    Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
    Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
          IF sy-subrc = 0.
                 Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
              Move X to GT_ZFIBUE-MAPPED.
              Modify Table GT_ZFIBUE.
             Endif.
Endloop.
1.8 Modify database table ZFIBUE from GT_ZFIBUE.
1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section Inputs/Outputs (above).
   Eg:                 LWA_ FIELDCAT -SELTEXT_L = 'Serial Number.
                          LWA_ FIELDCAT -DATATYPE = NUMC.
                          LWA_ FIELDCAT -OUTPUTLEN = 9.
                          LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
                          LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
          Append LWA_FIELDCAT to GT_FIELDCAT
Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = X in field catalog (GT_FIELDCAT).
         b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
         c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a SAVE button.
1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ZFIBUESTAT) and I_CALLBACK_USER_COMMAND (=HANDLE_USER_ACTION) will also be passed to handle user events. Go to 2.14.
1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
1.12 Exit Program.
Logic to be implemented in routine Handle_User_Action
This routine will have the following interface:
FORM Handle_User_Action USING r_ucomm LIKE sy-ucomm
                                                           rs_selfield TYPE slis_selfield.
ENDFORM.
Following logic will be implemented in this routine:
1.     If r_ucomm = SAVE, continue. Else exit.
2.     Loop through GT_ZFIBUE where SEL_ROW = X. Row is selected
a.     IF GT_ZFIBUE-PROCESSED = X.
i.     GT_ZFIBUE-PROCESSEDON = SY-DATUM.
ii.     GT_ZFIBUE-PROCESSEDBY = SY-UNAME.
iii.     MODIFY ZFIBUE FROM work area GT_ZFIBUE.
Endif.
Endloop.

Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

Need help I have iPhone (iOS x 7 was the last software update ) I need to install a flashplayer to view links in my email but I don't know which product try or which one works for my mobile device iphone 4....plz help

Need help I have iPhone (iOS x 7 was the last software update ) I need to install a flashplayer to view links in my email but I don't know which product try or which one works for my mobile device iphone 4....plz help

Hi shannonr98244154,
Flash player is not supported on mobile devices
-Varun

My ipod tuch is disabled and it wonts me to canect it to itunes but when i puge it in to the compter there is no icon that shows up for it so what am i supos to do plz help .

my ipod tuch is disabled and it wont me to canect it to itunes but i cant find the icon for it on the desck top on my computer my computer is a emac plz help me

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

ACPI Flash BIOS version 2.00 for Qosmio X770/X775 (PSBY5*)

I download the new version of the bios which toshiba send me to my mail in order to upgrade my system but on sunday I installed this bios and rhen my laptop turn off because I isntalled the new bios but since that day I cant turn on my qosmio!!! I press the button in order to turn on and when the logo of windows appear the computer stop

I have exactly the same issue. I followed all the instructions, as I did when I updated my bios five times before, and when i turn on the laptop i get two option either the windows repair which does nothing and start normally which freezes when the windows logo appears. This is extremely frustrating please someone address this issue. I have the fast boot option enabled for all its worth cause someone mentioned that in another topic on the 2.00 bios.

Where can I find BIOS version 1.9 for my Satellite A 60?

Hi,
I have a Satellite A6-692, Model : PSA60E.
I find on your site the link for many BIOS for this notebook.
I try each url but every url are dead!
Could you repair these links? (http://support.toshiba-tro.de/tools/bios/satellite/a60/win/bios-190win.zip)
Any body have saved this BIOS?
Thanks,
Mikael

Hello
Probably is known to you that companies as Toshiba do from time to time planned maintenance with servers and all saved data. I am pretty sure it will work again very soon.
As alternative you can visit follow page http://aps2.toshiba-tro.de/?page=bios
Bye and good luck!

Don´t start after install bios ACPI Flash BIOS version 2.00 for Satellite A215 (PSAFGU/PSAFHU)

After install this update doesn´t start anymore
it´s possible to install the previous bios?
Thank you

Phoenix BIOS Recovery by PETAR
Update: Boot-Block Jumper
http://rapidshare.com/files/14946637...ock_Jumper.pdf
This is the latest PHLASH16 I could find:
http://rapidshare.com/files/15674471...6.5.4.rar.html
Tool provided by @offon7544
Here is the Archive with all the files needed and How to for Phoenix BIOS Recovery.
Method 1.
http://www.box.net/shared/j2u98ci67f
How To:
1. Use HP USB Disk Storage Format Tool with MiniDOS files to make your Bootable: Flopy, USB Flopy, USB Flash Drive (Flash Drive works in rear cases).
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Stick, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Stick, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F)and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 2.
http://rapidshare.com/files/105952250/Metod_2.rar
How To:
1. Click on the Phoenix_Crisis_Recovery.exe to make: Flopy, USB Flopy.
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 3.
http://rapidshare.com/files/105952818/Metod_3.rar
How To:
1. Use HP USB Disk Storage Format Tool with MiniDOS files to make your Bootable: Flopy, USB Flopy, USB Flash Drive (Flash Drive works in rear cases).
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Stick, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Stick, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
Method 4.
http://rapidshare.com/files/105953337/Metod_4.rar
How To:
1. Click on the Phoenix_Crisis_Recovery.exe to make: Flopy, USB Flopy.
When creating the boot Floppy, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
Couse we need DOS with no additional programs that are loaded, which could interfere with the operation of the BIOS flash application.
2. Copy all the files from Rescue to your: Flopy, USB Flopy.
3. Rename your BIOS file to bios.wph and copy it to your: Flopy, USB Flopy.
4. Remove the battery, unplug the computer from the power.
5. Hold down: Fn+B or WinKey+B (On some new Acer Laptop's Fn+Esc and on some new Fujitsu Siemens Laptop's Fn+F) and while holding plug the computer in to power (do not plug the battery) and pres the power button.
6. Now you should hear the flopy drive working, hold the keys for a while and then let go.
7. Leve the computer for at least 10 min. and if the computer does not restart it self turn the power down.
8. Plug the battery and the power sorce and if everything went OK the computer shold start normaly.
Note: This procedure is for Phoenix BIOS`es only and in some cases the USB Stick might not work.
The HP Tool is located in the archive of the first metod.
Use the metods in order form 1 to 4, unless you think otherwise...
Hope you never use this and if you ever have to GOOD LUCK.
Insyde Recovery
INSYDE BIOS RECOVERY METHOD added 28/11/2009
http://forums.mydigitallife.info/showthread.php?t=13095

Was download suddenly come software 4 upgrade than i click yes than my phone was stuck than automaticly 4ne swicth off.now its show sometime no service sometime connect ur itunes but its no options for connect i tune.my phone is iphone 3gs.plz help me

was download suddenly come for upgrad than i click yes after few minute my phone is stuck than automaticly my phone switch off than its show sometime no service sometime connect your itunes but its have not itunes add option now i dont know what to do. Please help me. My phone is iphone 3gs.plz email me id is [email protected]
om

You must be a Windows sufferer.
http://support.apple.com/kb/TS3694#error1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error21
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Bsod Problem, Bios Related?? ati2cqag.dll?? Plz Help Guys

well i have quite a problem here and i dont know if the bios is related to it.
my specs are:
msi k9ngm-l (V3.7b1 bios)
amd 64 x2 5600+ (2.9ghz)
4 gb ram (though i see only 3 because of xp)
radeon hd 4850 512mb
for about 2 weeks im having wierd bsod during gamming but usualy its when i quit a game, before it gets back to desktop it will bsod. when i get the bsod it says the cause is FAULT_IN_NONPAGED_AREA and related to ati2cqag.dll
ive updated my graphic card driver, didnt help, downgraded version of driver, didnt help, i must point that one of the "uninstall" drivers went wrong and gave me some trouble but ive cleared all the files, registry keys and installed again new drivers. the bsod didnt stop. ive then tan memtest for 4 hours, no faulty ram according to it. i can play fine, no drop in frames its normal, its just crashes randomly.ive stressed the gpu and its fine. ive searched for answers but cant find the problem. any help would be great. thanks in advance

Do memory check with >>Memtest86<<
List PSU brand with details, look over PSU sticker.
"amd 64 x2 5600+ (2.9ghz)
4 gb ram"
That's 2 or 4 memory sticks?

I really want to change the look of my lockscreen, but i dont know how. Plz help!

On my iPhone I can change the background of the lockscreen, or or with things like springboard I can change the theme. I wanted to do this on my mac so i downloaded Lockscreen 2. But I didn't want a passpattern, I would rather a password. So is there any way I can change the look of my dull-looking default lockscreen?

Device not detected in iTunes for Windows: support.apple.com/kb/ts1538

H61M-E33 B3 - which BIOS version for i5-3570?

Hi
My motherboard is MSI H61M-E33 B3, I was using i3-2100 CPU, but a friend gave me his old i5-3750, which is far better. I updated my BIOS with Live Update before I swapped CPU's but I guess that my BIOS version is still wrong for this i5, because when I try to run my PC, it beeps 4 times and reset. So my question is, what is exact BIOS version I need for this CPU to work, and where can I download it? I would be really thankful for any help

Quote from: HenryW on 18-February-15, 08:03:41
Does it still work with the 13-2100? Did you clear CMOS after BIOS update?
Yes, and yes. Works perfectly with i3, and I've cleared CMOS, but it didn't help.
Quote from: Chike on 18-February-15, 08:06:21
Go to MB support page and check the compatibility list.
for the last 2 digits/letters, A=10, B=11, C=12 etc, so A2 will be 10.2
The problem is, on this page - http://www.msi.com/product/mb/H61ME33_B3.html#hero-overview - On the compatibility tab, my i5 is labeled as "7680vC0.zip" - so i guess BIOS version 12.0 - but on the downloads tab, I see only BIOS 12.3 and 12.2, and the next older one is 10.E :/ Should I download this 12.2 or 12.3 versions?
When I use my Live Update 6 program, with i3 CPU mounted, it tells me that my BIOS version is A.E0 and it is the latest one, and no need to update.
I'm really, really confused :P

New bios version for HP Envy 800-060

There is a new bios version, 80.21, for the above listed machine. I wish HP would put in the release notes with their downloads. When the update just says critical, but doesn't tell you what it's doing, that is kind of annoying.

I agree. that is strange. i will ask my internal contacts about it and get back to you on this.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Looking for bios version 1.7 for K8N Neo4 FI - plz help, it's urgent

Similar Messages

Maybe you are looking for