Looking for calorie tracker with monthly totals

I'm looking for an app which will track my workouts and give me monthly totals on calories lost. Is there such thing? If not then I just need the best calorie tracker on the iPhone. I had this neat app on the Droid called cardiotrainer it did the trick but the iPhone doesn't have it.
Thank you

Going to the third party re-seller could be part of the issue, but also VZW now has a rule that if you go to a feature phone from a Smartphone, you have x amount of days to get back on a smartphone and keep unlimited data.Not much you can do to get around that.
Going back to the Reseller. Even if VZW was able to get you back on the plan, you most likely would be hit with a $300+ETF from the reseller for changing something on your plan within 181 of sgning the contract with them.
Either way, you would be paying more.

Similar Messages

Looking for a pager with advanced functionalities

Hello everyone,
I am looking for a pager with which I could put custom icons for the different workspaces.
I have an HTPC that is mainly used for three things: watching movies, playing music and browsing the internet. Therefore, I would like to have four workspaces, one for each of these and another one for administration. Since this is an HTPC, I'd like it to look good and I think it would be neat to have images instead of numbers/squares for the workspaces: a movie reel for the "movies" workspace, a note for "music", etc... I have been looking at pagers on the wiki, but most of the links are broken. I am currently running XFCE, but would install another WM for this. The idea came to me because I could do this on awesome 3, which is installed on my laptop, but my roommates are firmly opposed to a tiling WM on the HTPC.
If anybody can provide suggestions, they will be very welcome.
Cheers,
François

Howdy-ha- flamirande. I don't want to be a total prick, as it's not my place; it's yours. Xfwm or Awesome will get the job done, won't it? You might be able to wow them if you get a universal remote and set up a proper lirc connection, letting them sit on the couch and have the power at the press of a finger. I have some friends with XBMC (the real thing--a dedicated, old-school Xbox hacked with BSD for all their media), and they're more satisfied with the results it provides than how it looks. Yeah, their Win and Mac PCs (both my friends' and your roomates') give them Facebook and YouTube, but yours gives them music, movies and tv and internet on demand, at a smaller resource cost and with a more versatile core and interface. If they're so touchy about polish, let them figure it out. I'm not just saying this as the sorry excuse for a computer geek that I am, but also as a person who's been dealing with many roommates for roughly a decade. I mean I don't know your situation but what do they think, the setup you give 'em is supposed to get them attention?
If these folks can't be satisfied by the fact that your system can provide them with a reliable, versatile, centralized, kick-ass setup that theirs can't, well...
More constructively: If they just won't have it...maybe openbox and tint2? You've got a low ram and cpu demand there, keeping music from skipping and video from tearing, if you work it out properly. Openbox has always been my choice for the right balance between polish and minimalism.

Looking for sample template with the check on the bottom of the page

Customer is looking for sample template with the check on the bottom of the page, anyone know of one? Their Bank doesn't like the check on the top of the page because when you rip the check from the stub is sometimes rips the microline. -Thanks

Hi Dale,
Check this one(template attached) : http://blogs.oracle.com/xmlpublisher/2006/04/13/#a12
You just need to flip the invoice and check position,..
regards..

Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

Creative Cloud Plans
https://creative.adobe.com/#plans

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Looking for App - Track roster, attendance, and availaility

I am looking for an iOS app that will allow me to put in my Teams Roster, put each players class schedule in, and then have the app automatically track who is available or not depending on practice time. This way when I go to take attendace for practice I will know who won't be coming.
So basically if practice was at 4pm and several players were in class at this time, I would want the app to reflect this when I went to take attedance for the practice.
It would be a plus if I could import contacts already on my phone, as well as use a calendar already synced with my phone.
Has anyone come accross anything like this? I did a prettry extensive google search and couldn't find anything that did all of this together.

There is one. It's called iOweYou, it's in the App Store, and it's free.

Looking for a webmail with multiple accounts support

Hi,
I would like to set up a webmail on my server which I will use to check my various mail accounts on gmail and others.
I tried mutt, alpine, claws-mail, but I don't really like "true" mail clients, I prefer to use webmails (so it can render HTML mails, and I can access it from anywhere). But since I have many accounts, I can't (and don't want) to use the gmail webmail.
So I'm looking for a webmail which could transparently handle multiple accounts from different mail providers. I will be the only one using it so I don't even need multiple users to log on.
Does it exists? What would you recommend? I don't know anything about webmails.
My server is running lighttpd, with php and python (webpy). I'm not afraid of modifying some of the code if needed.
Thanks.
Last edited by pokraka (2010-07-13 15:36:59)

You can collect mail to your server, sort it (say have one local account with one folder per mail account), and view it via webmail.
Check this wiki articles:
http://wiki.archlinux.org/index.php/Ema … l_procmail
http://wiki.archlinux.org/index.php/Squirrelmail
I don't use this setup so I don't know how it works, but looks like what you are looking for.

Recent graduated Control-Systems (embedded) enginneer, with experience in France/lebanon/Switzerland Looking for a Job With Labview

I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc ‏77 KB
CV_SalimDARWICHE_EN_S.doc ‏229 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

My company is looking for a consultant with NKE experience

Hi
My company need to write an NKE in order to port our product to OS X. We've studied the documentation and example NKE projects and know what to do and how to go about it.
However, that's in theory, when developing for an OS on which you have no experience its always slower, and obstacles are encountered, and you can't be 100% sure the design is optimal, or won't create unanticipated problems.
So we're looking for somebody with proven expertise in developing NKEs who may be interested in some paid consultancy work on a per-need basis, activities could be design review, code review, guru to ask questions if something unexpected happens etc.
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
If you might be interested drop me a reply.

niuniu wrote:
We're based in Vancouver, Canada. If there is somebody nearby in the Pacific Northwest that would be ideal as it means face to face meetings are possible. But this isn't essential.
Hey, don't you need a favorable market opinion letter from the HRSDC before you can hire a non-Canadian?

Quick look for text files with non-registered extensions

It seems there was a way in 10.5 and 10.6 to register certain extensions with Quick Look to tell them how to preview a file. I have a lot of plain text files with different extensions that are not initially recognized by Quick Look. How do I hack the registry to tell Quick Look to preview a .cfg (or .aux, etc.) file as plain text?

Can't Quick Look for some text files
Re: Is it possible to change the viewing format?
Quick Look for files without extensions.
Re: Can I view text files without a .txt extension in Quick Look?
How do I add support to Quick Look

Looking for a designer with experience working on Motorsport projects

I am looking for a web designer with specific experience working on Motorsport websites. The project will be to design a BC site for a racing team which we will implement. If you believe you are qualified for a project like this please send me details of your portfolio and your rate. Note I am looking for someone who has actually worked on motorsport website, so will need to see evidence of this experience. If you do not have this experience please do not apply. Please PM me if you are qualified.

Hi Sir/Madam,
I recently Completed my PG Diploma Graduate in Industrial Automation and System Design from National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.I am good labVIEW Programmer and I am seeking job in labVIEW Sector, please help me where i could get the job in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
E-mail: [email protected]
Attachments:
resume ravi new formetpdf.pdf ‏65 KB

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

Looking for APEX tutoring (with pay) in NJ - urgent -

Hi,
I'm a newbie to APEX, and trying to get the project up and running. I can get a simple form up, but the project I'm doing is more than a simple form. I have not got a chance to get any training yet. Looking for APEX tutoring in NJ with pay.
Please let me know promptly.
Appreciated,
Helen

Helen,
First of all, welcome to the forums and the wonderful world of APEX development.
Before recommending anything, it would be really good to know a little bit about your background and how comfortable you are with Oracle, SQL, and PL/SQL. If you're completely new to Oracle (i.e. you've been working with EXCEL and ACCESS), I would recommend a completely different path than someone who is coming at this from a long history of Oracle Forms development, and different again form someone that has Java or other Web development experiene.
Can you help us out with some information about your programming background?
In general, I agree with Don. The 2 Day developer and Advanced Tutorial white papers will give you a good start, by letting you peek under the covers of what is possible with Application Express. There are also a couple good books that might help depending on where you're coming from and what your skill level is.
However, there is nothing like getting yourself into a learning environment that allows you to ask questions specific to what you're trying to achieve in the real world.
The company I work for ( [Sumner Technologies|www.sumnertech.com] ) also provides APEX training at the beginner, intermediate and advanced levels. We can provide these classes in a public forum, as private on-site classes, or we also provide instructor lead online training classes as well. We have several classes scheduled through the end of the year so check [http://www.sumnertech.com/training|http://www.sumnertech.com/training] for a list of available courses and our public/Online schedule).
What course best suits you will obviously depend on where you're starting from, but we can definitely help there.
Feel free to give us a call at (703) 879-4615. We'll be happy to help.
Doug Gault
VP, Sumner Technologies

Looking for history about 6 months ago. history is not set far enough back. any other options to retrieve it?

i need to retrieve my history from about 6 months ago. if my history folder does not go back this far, is there another way to review it? Anyway?

To view your browsing history, go to '''History > Show all History'''. If what you're looking for is not there, there is no way to retrieve it.

Look for JDeveloper Tutorial with samples code

Hello All ,
my name is Ron ,
i'm new user of JDeveloper i'm looking for a place to start a tutorial "How to use
the JDeveloper ? " with samples code .
from very basic use ( Hello world program ) to addvanced programming ( Like GUI Forms and Database )
please show me links where to start learning from
thanks in advance

The tutorials in the JDeveloper help system are a very good place to start. Choose Help | Help Topics from the JDeveloper menu then click the Tutorials book in the Help navigator. The tutorials are also available on OTN, see:
http://otn.oracle.com:8877/jdeveloper/help/
You may also find the 'how to' documents and samples on OTN helpful:
Oracle9i JDeveloper How To Documents
http://otn.oracle.com/products/jdev/howtos/content.html
Oracle9i JDeveloper Sample Code
http://otn.oracle.com/sample_code/products/jdev/content.html
Hope this helps.
- jon

Looking for calorie tracker with monthly totals

Similar Messages

Maybe you are looking for