Looking for complete QT 7 GetUserData data

I'm looking for an updated listing of all data nodes available through GetUserData such as ©cpy, ©nam, ©prd etc. The one list I have found has about 11 items. I think there may be more.

If you install Quicktime on all the computers there won't be any Pro related items, other than the grayed out functions for Pro. Only if you type in the registration key will it make Quicktime turn into Pro.

Similar Messages

  • Looking for a International Calling Plan + Data?

    Hello, 
    Let me first start by saying I am deploying to South Korea (Osan AFB) .
    I am looking for a plan with unlimited data usage and at least 450 minutes. I was reading about your global phones and south Korea is CDMA so that is good. It looks like I would have to get a new Droid but that's alright.
    I have a few questions though:
    1.  How does the data work for that plan? I don't quite understand how it works.
    2.  It says its $1.99 per minute, do you really charge by the minute? $1.99 is steep for a minute, 
    If I used 200 minutes at that rate my bill would cost $398 plus the taxes and other expenses. 
    3. What can the party  I am calling expect? Would it have to be a world phone to?
    I am just really trying to figure out how much this would cost.
    Thanks,
    Freddy

    I would strongly reccomend AGAINST trying to use your Verizon service overseas.  As you've discovered, the per minute rates are quite high, and your unlimited data plan will not work there, you would need to pay roaming rates for data as well, and they are no more palatable than the voice rates for international service.
    Once you get to South Korea, you should research local carriers and get service from one that is affordable and has the services you need, probably a prepaid carrier.
    To your last question, Verizon customers are not charged international rates for INCOMING international calls, so you could call back to the States from your local cellphone, landline, or VoIP provider, and they would be charged the same as if they were getting a call from another phone in the US.

  • Please help! Looking for script to insert current date on page.

    I currently use a Dreamweaver Extension that lets you insert
    current date and time on your web page.
    The problem is, I don't know Javascript and cannot edit the
    Javascript codes to "remove the time"
    I only need the current date that will change every day.
    Do you know where I can get this script, I goggled and got
    several but I'm looking for something authentic.
    Also is it possible to have your page validate when you use
    Javascript embedded in your HTML?
    Thanks everyone,
    Patrick

    quote:
    Originally posted by:
    Newsgroup User
    Webethics wrote:
    > The problem is, I don't know Javascript and cannot edit
    the Javascript codes
    > to "remove the time"
    > I only need the current date that will change every day.
    JavaScript generates the date by using the clock on the
    computer of each
    visitor to your site. If a visitor's clock has the wrong
    date, your site
    will also display the wrong date.
    > Do you know where I can get this script, I goggled and
    got several but I'm
    > looking for something authentic.
    I don't know what you mean by "authentic". Date generation in
    JavaScript
    is one of the most basic features of the language, so if it
    works, it's
    "authentic".
    > Also is it possible to have your page validate when you
    use Javascript
    > embedded in your HTML?
    Yes, but you shouldn't embed JavaScript in XHTML.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/
    So mr. Powers are there people that use Javascript Date in
    their page?
    Would you recommend it?
    I could use PHP but I don't know PHP,
    How do I come up with the string in this format, say,
    Wednesday, October 29th, 2008 that will change to a new day
    according to the server time and date.
    Thanks so much for your help and I have two of your books! I
    will be taking PHP classes in December.
    Patrick

  • Looking for SAP solution to extract data from the production system

    Hello,
    we are looking for the SAP standard tool to extract data from the production system and copy it to the development system. It should be as functional as some kind of partial client copy. The data, which we need to replicate is master and transactional data from FI, CO, AA MM and nice to have FS-RI modules. There is a product offered by the IntelliCorp called "Data Management" but we would like to know if SAP offers its own product.
    Kind regards,
    Krzysztof Murkowski

    Hi,
    SAP offers a solution called 'Test Data migration Server' or TDMS.
    You can access the master guide from the below link:
    https://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006332942006E
    Cheers !!
    Satya.
    PS: Pls reward points if the answer was helpful...Thx.

  • Look for 'Purchase Order' and 'Due date' Tables

    Hi Everyone,
    iam creating a Form for an automatic payment and i have some difficulties to find the table of these fields :
    - Purchase Order (EBELN)
    - Due date (NETDT)
    Please can u help me?
    Regards.

    I hope you checked these tables.
    I found these on Where-used for your NETDT field, Alos these tables have field BELNR which might intrests you.
      Table Fields                     Short descriptn
      BWPOS                            Valuations for Open Items
      FAEDT                            Due Date for Net Payment
      DKKOP                            Balance Audit Trail
      NETDT                            Due Date for Net Payment
      DKOKP                            Open Item Account Balance Audit Trail
      NETDT                            Due Date for Net Payment
      DSKOP                            Balance Audit Trail
      NETDT                            Due Date for Net Payment
      MHND                             Dunning Data
      FAEDT                            Due Date for Net Payment
    good luck,
    ags.

  • Site Counters - Looking for complete standalone HTML

    I am trying to put a counter on my website but all these "free" counters offered on the WEB have links back to the "free" websites or
    adverstisement text that must be displayed near the counter.
    There must be some snippet of code available that creates a counter that does not involve a thrid party
    Thanks in advance
    Jay
    pcb4u at verizon dot net

    OK .. thank you for your time with my issue.
    With that being the case do you know where I can get whatever is needed to get just a basic counter and not be tied to the 3rd party "Free Counter" web sites? I am not at this time looking for databases that would tell me where, who, etc but just a simple counter to increment just on a hit.
    Thanks in advance
    Jay

  • Looking for complete list of attributes to search on in Mail Search field

    I have been digging for hours and other than the few examples in Mail's help file, I can't find a complete list of attributes to search on when doing ad-hoc searches in Mail's search field.
    The ones I know of are to:, author:, subject:, kind:, date:, size:, modified:
    There are also quite a few synonyms like from:, by:, to:, recipient:, etc.
    But where is the complete list? Arghh!!
    Any pointers would be much appreciated, or maybe folks can just append the keywords they know to work here?
    I'd love to find one that does the equivalent of mailbox:foldername

    Launch Script Editor (in /Applications/AppleScript/), paste in this script, select Event Log, run it, and get Mail's properties:'
    tell application "System Events"
    get properties of application "Mail"
    end tell
    Alternatively, Script Editor->Window->Library-> add Mail's dictionary to the listing and then double-click on it.

  • Looking for best practice on showing data inside a TableView

    I have an app, that can retrieve one ore more than 300,000 rows as the result of a query and i am displaying them into a TableView.. i am using a mechanism to bring the data "on parts", when i do the query an object with the ids of the rows is set into memory and a "queryResultKey" is passed in order to start asking for the complete set of data.
    The controlers send the queryResultKey telling the DAO that it has already N resultas, so the DAO will return X registers (from N+1 to N+J) or less if the total number of registers is reached. At this point the registers are added to the items of the table view using a addAll to the list binded to the table itemsProperty.
    it works fine for the first thounsands registers but suddenly a Null Pointer Exception is raised:
    ene 15, 2013 12:56:40 PM mx.gob.scjn.iusjfx.presentacion.tesis.TablaResultadosController$5 call
    SEVERE: null
    java.lang.NullPointerException
         at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:291)
         at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:48)
         at com.sun.javafx.scene.control.ReadOnlyUnbackedObservableList.callObservers(ReadOnlyUnbackedObservableList.java:74)
         at javafx.scene.control.TableView$TableViewArrayListSelectionModel$3.onChanged(TableView.java:1725)
         at com.sun.javafx.collections.ListListenerHelper$SingleChange.fireValueChangedEvent(ListListenerHelper.java:134)
         at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:48)
         at com.sun.javafx.collections.ObservableListWrapper.callObservers(ObservableListWrapper.java:97)
         at com.sun.javafx.collections.ObservableListWrapper.clear(ObservableListWrapper.java:184)
         at javafx.scene.control.TableView$TableViewArrayListSelectionModel.quietClearSelection(TableView.java:2154)
         at javafx.scene.control.TableView$TableViewArrayListSelectionModel.updateSelection(TableView.java:1902)
         at javafx.scene.control.TableView$TableViewArrayListSelectionModel.access$2600(TableView.java:1681)
         at javafx.scene.control.TableView$TableViewArrayListSelectionModel$8.onChanged(TableView.java:1802)
         at com.sun.javafx.scene.control.WeakListChangeListener.onChanged(WeakListChangeListener.java:71)
         at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:291)
         at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:48)
         at com.sun.javafx.collections.ObservableListWrapper.callObservers(ObservableListWrapper.java:97)
         at com.sun.javafx.collections.ObservableListWrapper.addAll(ObservableListWrapper.java:171)
         at com.sun.javafx.collections.ObservableListWrapper.addAll(ObservableListWrapper.java:160)
         at javafx.beans.binding.ListExpression.addAll(ListExpression.java:280)
         at mx.gob.scjn.iusjfx.presentacion.tesis.TablaResultadosController$5.call(TablaResultadosController.java:433)
         at mx.gob.scjn.iusjfx.presentacion.tesis.TablaResultadosController$5.call(TablaResultadosController.java:427)
         at javafx.concurrent.Task$TaskCallable.call(Task.java:1259)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
         at java.util.concurrent.FutureTask.run(FutureTask.java:166)
         at java.lang.Thread.run(Thread.java:722)This exception ocurrs inside the Thread that is filling the table:
    task = new Task<Integer>() {
                @Override
                protected Integer call() throws Exception {
                    while (listaTesis.size() < pag.getLargo()) {
                        List<TesisTO> tesisParaincrustar = fac.getTesisParaLista(pag.getId(), listaTesis.size());
                        try {
                            listaTesis.addAll(tesisParaincrustar);
                        } catch (Exception exc) {
                            Logger.getLogger(TablaResultadosController.class.getName()).log(Level.SEVERE, null, exc);
                        tesisActuales.addAll(tesisParaincrustar);
                        updateProgress(listaTesis.size(), pag.getLargo());
                    return new Integer(100);
                @Override
                protected void succeeded() {
                    status.getProgreso().setVisible(false);
                    preparaFiltros();
                    llenandoTabla = false;
                    tblResultados.getSelectionModel().select(0);
            status.getProgreso().progressProperty().bind(task.progressProperty());
            new Thread((Runnable) task).start();So, what can be another strategy to simulate (or have) that all the register values are in memory and "grab just the needed ones" to display them in the TableView???
    Any idea will be helpfull.

    The first thing I would do here is to check that
    fac.getTesisParaLista(pag.getId(), listaTesis.size())cannot return null under any circumstances. If this is returning null, then that is the source of your exception. In this case you should add the appropriate guard to your code:
    if (tesisParaincrustar != null) {
                        try {
                            listaTesis.addAll(tesisParaincrustar);
                        } catch (Exception exc) {
                            Logger.getLogger(TablaResultadosController.class.getName()).log(Level.SEVERE, null, exc);
                        tesisActuales.addAll(tesisParaincrustar);
    }For the threading issue, you can schedule anything that changes the UI to run on the FX Application Thread using Platform.runLater(...). Note that any data you pass into that should not be modified elsewhere. So you can do something like:
    Platform.runLater(new Runnable() {
      @Override
      public void run() {
                        try {
                            listaTesis.addAll(tesisParaincrustar);
                        } catch (Exception exc) {
                            Logger.getLogger(TablaResultadosController.class.getName()).log(Level.SEVERE, null, exc);
                        tesisActuales.addAll(tesisParaincrustar);
    });You'll need to add the 'final' keyword to the declaration of tesisParaincrustar to get this to compile.
    This is fine, assuming that the call to fac.getTesisParaLista(...) returns a new list instance each time (i.e. it doesn't modify an existing list).
    You will be left with one remaining problem: the condition in your while(...) loop references listaTesis.size(). Since this list is now being updated on a thread different to the thread managing the while(...) loop. This can (and probably will) cause the loop to terminate at the wrong time. Can you adjust the while(...) condition so it doesn't refer to this list (for example, calculate ahead of time how many things need to be read, pass that number to your Task implementation, and use that in the while(...) condition.)
    There are effectively two rules for multithreading in JavaFX:
    1. Don't access the UI outside of the FX Application Thread. This includes data structures which are bound to the UI. I'm assuming at some point you've called tableView.setItems(listaTesis), so listaTesis should be considered part of the UI.
    2. Don't perform long-running tasks on the FX Application Thread.
    In attempting to conform to rule 2, you've violated rule 1.
    Doing incremental updates to a displayed list in a background thread is one of the trickiest uses of Task. Read through the API documentation for Task ( http://docs.oracle.com/javafx/2/api/javafx/concurrent/Task.html ): the "PartialResultsTask" example under "A Task which returns partial results" is an example of what you're trying to do.

  • Use Color or Magic Bullet Looks for complete grade and effects?

    I am a long time MB Looks user - not heavy dosages but I do find it easy and fast as it keeps you inside FCP and along with the 3-Way CC it was efficient.
    I am nearing an edit on a 80 minute documentary which involves going from color to clips converted to black & white and sepia tone for effect. I am thinking to use Color workflow for the entire color grade and effects.
    Does Color dispense the need for Looks altogether? I have used color a few times now but not on a complete feature length, so I would need to sharpen my knowledge.

    Jon Braeley wrote:
    Does Color dispense the need for Looks altogether? I have used color a few times now but not on a complete feature length, so I would need to sharpen my knowledge.
    Color, MB Looks, FCP's 3WCC are all arrows in our quiver. We don't need to give one up to use another.
    I'm working on a doc now (it's rendering out in Color as I type this) that has "Hero" shots being treated in MB Looks. But I use Color to even out all those Hero shots so the MBL settings I'm using will be applied consistently. But even then I find it useful to to precede MBL with a 3WCC so I can easily adjust the tonality, saturation, and color palette of the shot without having to step back into the MBL interface.
    I can definitely guarantee that I couldn't have graded this show in 2.5 days if I just kept myself to using only the FCP interface. Even with the prep time for the Color round-trip - I get better results faster...
    - pi

  • Looking for advice on adding GPS data to pictures in iPhoto

    I'm thinking about beginning the process of adding GPS location data to my pictures in iPhoto. I've got about 9,000 pictures overall but was going to start with the ones from this year (about 1,500) as a trial. My digital camera is not GPS-enabled nor do I own a portable GPS receiver. Therefore, my option is basically to look at 3rd party apps that integrate with iPhoto to allow me to 'manually' add the data.
    From what I understand, iPhoto caches all EXIF data upon import so any additional information or metadata added after the pictures are in my iPhoto library would be lost or ignored (someone please correct me if I'm wrong). If this is true, I'm looking at exporting the pictures out of iPhoto, bringing them into another application (like HoudahGeo) to add the GPS EXIF data, them re-importing them back into iPhoto. Seems like a lot of work, but down the road I like the idea of having all my photos tagged with their location info and being able to view them through Google Earth or other similar apps.
    Has anyone had experience doing this? Have you found a utility or other workflow that is easier than what I mentioned? Thanks in advance for any ideas or support anyone can provide.
    Regards,
    Bill
    iMac Core Duo 20"   Mac OS X (10.4.9)  

    Bill:
    Welcome to the Apple Discussions. PhotoGPSEditor works well and you can batch add gps data based on Google Map determination. You can drag same location photos from iPhoto's thumbnail window into PhotoGPSEditor's window, add the gps data by selecting the location on the Google map and when you save it asks you for a location. Then you can save to a folder on the desktop and reimport. The gps data shows up under the Exposure section of the Info window in iPhoto.
    I've only done it on a test basis but it worked quit well.
    Do you Twango?

  • Looking For Complete housing/keypad 4 W995 pink

    looking to see if anyone has a complete original housing or keypad for the w995 pink ... or knows of anywhere u can get an original one from .
    thanks diane

    http://cgi.ebay.co.uk/Sony-Ericsson-W995-Pink-Casing-Fascia-Cover-Housing_W0QQitemZ130469281411QQcmd... Try this

  • Looking for some tips on Decoding date. TX

    HI,I still have problem with this decode. I need to count students group by their region on each month. The output should be
    COUNTRY OCT NOV DEC .....
    USA 5 20 30
    CAN 100 1 0
    MEX 10 20 30
    The date format is 5/19/2007
    This is my code: and thanks for your help
    WITH Q AS (SELECT DISTINCT A.STDID, A.NUMBER, A.ADMIT
    FROM PROG A
    JOIN CITIZEN B ON A.STDID = B.STDID
    JOIN REGION_TBL C ON C.REGION = B.REGION
    AND A.NUMBER = 'PS'
    AND A.ADMIT IN ('2007','2008'))
    SELECT J.REGION, I.DESCR,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '09', 1, 0))) SEP_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '10', 1, 0)))OCT_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '11', 1, 0)))NOV_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '12', 1, 0)) )DEC_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '1', 1, 0)) )JAN_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '2', 1, 0)) )FEB_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '3', 1, 0)) )MAR_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '4', 1, 0)) )ARL_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '5', 1, 0)) )MAY_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '6', 1, 0)) )JUN_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '7', 1, 0)) )JUL_TOTAL,
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '8', 1, 0)) )AUG_TOTAL
    FROM CITIZEN J
    JOIN PROG L ON J.STDID = L.STDID
    JOIN Q ON J.STDID = Q.STDID
    AND Q.NUMBER = J.NUMBER
    GROUP BY J.REGION, I.DESCR

    SUM(DECODE(TO_CHAR(L.ACTION_DT,'YYYY-MM-DD', '09', 1, 0))) SEP_TOTAL,Apart from having brackets in the wrong place you are comparing a date that you are converting to a string in the format YYYY-MM-DD to a string that is 1 or 2 digit number.
    This should be something like
    SUM(DECODE(TO_CHAR(L.ACTION_DT,'MM'),'09',1,0)) as SEP_TOTAL,

  • Looking for a app to share data by Bluetooth

    Anyone know if an app to pair with other phones and share data?

    I only found one; http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=309439356&mt=8

  • Still looking for anwers to TCP Connection data

    Can flash monitor TCP connection status? I need to read it
    somehow and then send that info back to the server. Posted this a
    number of weeks ago, but not a single nibble.
    Anyone?

    The server only uses port 80 in this case, and we are not
    connecting to any other domains. He can't seem to get a policy file
    to work, so the whole thing has now become my fault.
    The deal is, using the .close(); method works fine, but his
    PHP is pushing the file anyway. It took me a week to discover that
    this issue isn't mine. But .. the php developer is convinced that I
    haven't written the AS properly, or we wouldn't have this issue. I
    simply state that the way I am using the .close() method works
    fine, but his code is overriding it, which is out of my hands. But
    I am trying to find a solution, and we are both thinking this
    socket connection may be it, we just can't get it to work without
    errors.
    Funny, he pointed me to a site that he says does exactly what
    he wants this to do, and it throws at least six errors before the
    song finally plays. He has not acknowledge that minor deatil yet.
    :)

  • Looking for Active Data Service samples with RDBMS change notification fire

    Hi,
    I am looking for samples/examples of Active Data Service when a server side event, like RDBMS change notification got triggered.
    The ADS samples that I found so far are:
    - Twitter http://www.oracle.com/technetwork/developer-tools/jdev/learnmore/65-activedataservicestwittersample-191314.pdf
    - http://adfwithejb.blogspot.com/2012/12/active-data-service-with-active-image.html
    - http://adfwithejb.blogspot.com/2012/12/active-data-serivce-with-data.html
    But these samples do not demonstrate how RDBMS change notification got triggered got triggered. The last two samples have a Runnable class that simulate the triggering, and the Twitter example is twitter stream notification.
    Please shed some lights on Active Data Service with RDBMS change notification got triggered.
    Thanks
    -Mina

    Hi Mina,
    Check this 2 resources, first a presentation made at OOW by Lucas Jellema: http://www.slideshare.net/lucasjellema/push-to-the-limit-rich-and-proactive-user-interfaces-with-adf-oracle-open-world-2011
    second an interesting forum thread around the the topic: ADF BC and the Active Data Service using af:table from what I know this is still valid as of today.
    After reviewing the topic there is also one more link that address this topic:
    http://technology.amis.nl/2012/06/18/notifying-adf-applications-of-database-changes-fast-and-lean-using-database-query-result-change-notification-part-one/?utm_source=rss&utm_medium=rss&utm_campaign=notifying-adf-applications-of-database-changes-fast-and-lean-using-database-query-result-change-notification-part-one
    Thanks,
    JC
    Edited by: Juan Camilo Ruiz on Jan 9, 2013 2:57 PM

Maybe you are looking for

  • ASA 5510 vpn question

    Hi all, I have 1 ISP link terminated on ASA 5510. Can i configure both easy vpn and site to site vpn on that interface ?

  • Help needed to do port forwarding in ipfw...

    For the last weeks I have been working to get the new open-source content management system Alfresco working. It is a pure Java web application that runs under Tomcat. There is official support for Mac OS X but only Windows and Linux gets true instal

  • Using PPR in PL/SQL generated webpages

    I have a question about using PPR with web pages written in PL/SQL. I have a dropdown menu that I want to limit by the value selected in the preceding dropdown (pick-list). So far I have not found much information on PPR other than on OTN, and was un

  • Example of Extension installer ?

    Hi Anybody has an example of a JNLP application that uses an installer (installer-desc) ?? I am tyring to make one, but somehow, I cannot get the application to start after the installer finishes... cheers Yann.

  • How is the Student Edition different?

    Hello, I am a college student and while browsing my university software store I noticed they had Adobe Creative Suite 4: Web Premium Student Edition. I was wondering what makes the student edition different from the premium set?  Is the education set