Looking for components with certain table features

Hi
I'm pretty new to JSF. Most of the table components I've found provide sortable headers, but I'm looking for something that lets the user filter what the table shows say by clicking a header and selecting the "only show rows where this value is > 10" option. Is there anything like this out there?
Also it would be nice to see a list of what tag libraries are out there so I can see what they have to offer. I'm only aware of a few libraries, Trinidad, Tomahawk, and ICE.

That looks great, probably just what I need! It looks like its incompatible with my setup though. Any others?

Similar Messages

Create a Navigational Hierarchy for filtering with the Table API

Hello,
I've built a WAD report acourding to the how to document: "Create a Navigational Hierarchy for filtering with the Table API".
It works great but i dont know How to make the hirarchey to show the key and the text.
Please Advice.
David

Hi Kenneth,
please have a look in the source of the executed Web Application. What is inside of the <div> with the id filter?
You should also find a td tag with id hier_xyz with xyz the filter inside of the <div>-Tag with id filter.
Also check whether you have a javascript error.
Have a look on the Javascript function set_style. Perhaps you can paste it here, than I can have a look.
Heike

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

Error binding table components with database tables

Hi, when i try to bind table components with database tables y receive this error
java.lang.NullPointerException
     at com.sun.sql.rowset.CachedRowSetXImpl.initMetaData(CachedRowSetXImpl.java:861)
     at com.sun.sql.rowset.CachedRowSetXImpl.getMetaData(CachedRowSetXImpl.java:2336)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.getMetaData(CachedRowSetDataProvider.java:1317)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.getFieldKeys(CachedRowSetDataProvider.java:489)
     at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.resetTableColumns(TableRowGroupDesignState.java:261)
     at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.setDataProviderBean(TableRowGroupDesignState.java:163)
     at com.sun.rave.web.ui.component.table.TableDesignState.setDataProviderBean(TableDesignState.java:250)
     at com.sun.rave.web.ui.component.TableDesignInfo.linkBeans(TableDesignInfo.java:162)
     at com.sun.rave.insync.models.FacesModel.linkBeans(FacesModel.java:1042)
     at com.sun.rave.designer.DndHandler.processLinks(DndHandler.java:2126)
     at com.sun.rave.designer.DndHandler.importBean(DndHandler.java:880)
     at com.sun.rave.designer.DndHandler.importItem(DndHandler.java:702)
     at com.sun.rave.designer.DndHandler.importDataDelayed(DndHandler.java:376)
     at com.sun.rave.designer.DndHandler.access$000(DndHandler.java:114)
[catch] at com.sun.rave.designer.DndHandler$1.run(DndHandler.java:298)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

There are a thing that I don't undertand. When I try to bind samples database table (Travel, for example) to table components, there are no errors. But when I try to bind table component with my remote postgresql database table, yes...the table component disappear and only a "Table" string is displayed....this error is because I use remote database?? Or because it's PostgreSQL??
Thanks.

Looking for Help with Hyperion to JAVA

I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

HT5731 How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad

How to make form field read only for users with certain permissions

We need to make two form fields read only for users with certain permissions. Kindly guide me on how to do this in Infopath. I searched and there is an option to disable to the column, but no option to select user permissions.
Please give your suggestion on this.
thanks.

Hi,
See the link below:
http://info.akgroup.com/blog-0/bid/69277/InfoPath-Restrict-visibility-to-users-in-a-SharePoint-Group
Here you can add the fomatting action on the field to disable the field if those users belong to certain Sharepoint group (does not matter the permission levels though). Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)

SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
Controlling launch pad equipment via PXI/LabVIEW
Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
Cargo configuration of Dragon capsules going to resupply the International Space Station
Maintenance of Mission Control Centers with the help of our IT department
With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
Ideal candidates will have the following qualities:
CLD-level LabVIEW experience
A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
About the job:
Job is located in Hawthorne, CA in the Los Angeles area.
This is not a 9-5 job. There will be some late nights.
You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
We are only hiring full time employees. Contractors need not apply.
To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
Message Edited by Lavezza on 03-31-2010 03:59 PM

There is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
Look for the position called: Mission Control Software Engineers (LabVIEW).

I don't use Photoshop - looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting. Any suggestions?

I don't use Photoshop, I'm an Aperture guy.
I'm looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting.
I'm especially interested in the bending of the pixels, along the lines of impressionist paintings - think van Gogh.
Any suggestions?

If you are interested in computer simulated drawing and painting effects, have a look at the "ToonIt!" plug-in for Aperture. This will do some of the basic work for you, but you will have to do quite a lot of editing afterwards, to turn the image into a piece of art.
It might be easier, to do most of the drwing and painting yourself in the first place - ArtRage Deluxe is very versatile, if you have a large trackpad and pen.
For example: Applying a light ToonIt! effect "Impressionist2": The diagonal
cross-pattern is due to "Demo" mode - I have not yet bought the plug-in - it is rather expensive:
The original:

One question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to

one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TY

The History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/

Class not registered. Looking for object with CLSID:

Hi,
I had create a custom project system with the help of https://msdn.microsoft.com/en-us/library/vstudio/cc512961.aspx. And which is working fine that I can create a project with extension of .myproj in the VS Experimental Instance window. But when I go for
the properties in the created project, (Solution Explorer: Right click on the project folder and select properties) it will show an exception that "Class not registered. Looking for object with CLSID:{00000-00-00-000000}" How can I provide Properties
window for this project system or can I modify the Properties window for any other default VS project system? Please help me.

Hi mathikp,
I don't think you did something wrong while creating the project, but instead it could be the issue of environment, I would suggest you to validate following things:
1, Try to create another blank app to see if the exception still thrown.
2, Run with an administrator privilege to check if you can get the project work..
I would not consider its as a coding issue but try to fix Visual Studio probably helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fortinet configuration with SCCM - just looking for experiences with it.

Just looking for experiences with Fortinet SSL gateway and managing clients with SCCM with it. I'm planning on building a lab area and selling management the idea of using Windows Defender and managing the 700 remote clients we have with our SCCM 2k7
R2 setup on Windows 7.
So if anyone has any experiences it would be handy. Or white papers would be awesome.
Trying to figure out an SSL gateway product with a path of least resistance that isn't Citrix.

Yes, I know this is an old post, but I’m trying to clean them up.
You will get more responses from Fortinet forums.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Looking for TV with features

I'm looking for a tv with the following:
LED, PIP, WIFI, 120HZ, auto aspect ratio switching. Size is not a major concern as long as it has the features.
Bert

Hmmmm PIP... that's hard to come by now. If there is a tv with PIP, one source HAS to be from the tuner input from the tv. You don't usually find the PIP as a "draw feature" anymore so they don't seem to list it on any specs of a tv. So you actually have to go to the store and ask to go through the tv's menu to try and find whether it has it or not. When I worked at BBY most sales people weren't smart enough to look through the menu so they would just tell people that it didn't have PIP. If I remember correctly the high end samsung and sonys still have PIP. You just have to go physically look for it. All the other features you mentioned though are easier to come by. Most tv's are only WiFi Ready though, which means you have to buy an adapter separately. Samsung, Sony, and LG have the features you're looking for.

Look for: components used for Service Brokerage (CSB) for mobile networks

I am looking for developers/company offering components used for Central Service Brokerage (CSB) for mobile networks. It aims to store consumer profiles and directs service requests (shopping, travel & meeting services, hospitality and insurance) from mobile consumers to connected retailers and appointed service providers.
I would be higly interested in almost ready to use components/architecture which can be used in new service/start-up situation.

Hey Anthony,
Yes, a lot to read, thanks for reading though!
For the External Web Services, since I have it set to fe-pool.domain.local right now, I figure this is as simple as flipping it to fe-pool.domain.com within Topology Builder | Enterprise Edition Front End Pools | Edit properties | Web services?
After which, I assume I will need to create a new host A record for fe-pool.domain.com, pointing to the Pub IP 1.2.3.4 I have set up to forward directly onto my FE Server of 18.20? I am a bit of confused as to how this external web service is contacted,
does the mobile app use lyncdiscover.domain.com to find this information? In other words, does the lyncdiscover allow the mobile app to get inside the topology, the topology reports to the mobile app that "Hey, fe-pool.domain.com is going to be your External
web service as defined in the topology" ? If its just that easy this should be a quick change.
As for your next question, on the F5 level I'm pretty certain it is just set to take any packets coming in from pub IP 1.2.3.4 : 80 or 8080, or 443, or 4443, to allow it to go to that FE server IP on any of those ports. I don't believe it is actually taking
a 443 packet, and converting it into a 4443 destination. Also note, I am forcing lyncdiscover to use port 80, instead of 443 because I am unable to get a new pub cert with the lyncdiscover SAN.
As for the domain user, it is simply just my single user and I am flipping the SIP domain in the control panel within the user properties. domain.com and domain.local are both configured SIP domains in my topology, however i have domain.com as the default.

Looking for components with certain table features

Similar Messages

Maybe you are looking for