Looking for CRM IC Webclient HTML page

Hi guys
I need to change a value which is found on a HTML page.
The page starts with :
<html dir="rtl"><head><title>Interaction Center</title>
      <SCRIPT language="JavaScript">
This html can be obtained if I tight click the page in the browser and look for the
page source code.
But I cannot find this page.
I have searched SE80 under CRM_IC_* modules and found nothing.
Any hint will be appreciated
regards
yuval

Hi Yuval,
Instead of looking into the source code of the broweser better you maintain the parameter CRM_ICWC_TEST with value 0x23456789 in your user setting. This will activate your tool tip and then you will see a tooltip appearing in the application when you point your mouse to the title of a view, telling you the BSP application name .
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Similar Messages

  • Transaction Launcher for CRM IC Webclient

    Hi
    I need some help in configuring Transaction Launcher for CRM IC Webclient, the catch is the backend is not SD but Campus Management. Help pls [email protected]
    Anu

    Hi Raja
    Thanks for your reply actually I don't have the cookbook can you please email me the link to the cookbook or the pdf. Thanks once again
    [email protected]
    Anirudha

  • I try to create an html for IPad. The html page contains an element overlapping a video, now it works as for view but the focus is still with video. This denies the event of overlapping element from occuring. Can please anyone help to solve this issue?

    I try to create an html for IPad. The html page contains an element overlapping a video, now it works as for view but the focus is still with video. This denies the event of overlapping element from occuring. Can please anyone help to solve this issue?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Looking for crm software for mac

    I am trying to figure out which crm software is the market leader for mac? Which offers ease of use for new users?

    The best suggestion I could give you wouldn't be necessarily a Mac app, but its a cloud CRM written in HTML5 and CSS 3, so it's accessible from any browser and they have native mobile and desktop apps coming soon.
    It's JobNimbus. By far the easiest CRM software to use, which is something you really have to look for. Everyone CRM says they're easy to use, but the industry in general just drowns in bad adoption rate (see here) because of the terrible software they make, so you have to get in and try it out.
    JobNimbus has a free 30-day trial of their Pro version, but you can still use it after that as a Basic version with less features. It's also not just CRM, but also project management, so it makes it even easier to streamline your workflow.
    Go ahead and check it out, maybe try it for a couple days and see what you think: http://www.jobnimbus.com. Their customer service rocks too. I'm using it and can tell you, you won't be disappointed.

  • Looking for Javascript to replace 'selected' pages in a pdf?

    Hi
    I've searched the web looking for a solution to a time consuming issue without luck. I have multi-page, print ready pdfs - but have to make corrections to a number of 'random' pages in InDesign. I have to replace only the random corrected pages in the standing pdf.
    An ideal solution would be a script that could launch an interface allowing input of the corrected page numbers eg: 3,5,14,56,92,146, together with a facility to select the corrected file/or files to replace pages, page number for page number in the print ready pdf. Does anyone know of a solution or possible starting point?
    MTIA

    Hi,
    Have you tried transforming this using XSLT?
    Regards
    Ayyapparaj

  • Set DOCTYPE for a self rendered HTML page using cl_gui_html_viewer

    G'Day!
    I'm dealing with HTML in ABAP and i' stuck with a nasty little problem. Perhaps somebody know's the answer and can help me out. Thanks in advance. (I'm sorry for my poor english)
    My problem is:
    I am rendering a html page in abap and display ist using a cl_gui_html_viewer.
    Works fine.
    But now in need to set the right DOCTYPE for the rendered html page.
    If i add the DOCTYPE definition, my html page is not displayed, instead i get a display of the html-code??
    To break it down to the root:
    How can i add the DOCTYPE definition to a self-rendered html page?
    If i add the DOCTYPE definition as first element of my html table, the html code won't be interpreted.
    If i do not add the DOCTYPE defintion everything works fine.
    I need the DOCTYPE definition so that the browser won't get into quirks mode and interpretes the html tag's right.
    What i've done so far:
    (Dynpro, container, html_viewer)
    Load my JScripts (with load_mime_object)
    Load my CSS (with load_mime_object)
    Load my HTML:
    -- lt_html       TYPE w3htmltab
    ((--  APPEND  '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN">'  TO ct_html.)) this line cause my trouble
    -- filled the itab with my html tags <html>....</html> (set right url for Jscript and CSS)
    -- Load my html table and get an URL CALL METHOD gr_labform_html->load_data
    -- Load the url CALL METHOD gr_labform_html->show_url

    I've "solved" my issue with a little workaround.
    I created an empty html page with an existing DOCTYPE def and an tag like <!MYDATA!>
    After that i filled 'l_merge_table TYPE swww_t_merge_table' with my tag and my html_data.
    Loaded the whole thing with CALL METHOD gr_labform_html->load_html_document and now the DOCTYPE is set fully correct!
    But i'm still interessted why i can't set the DOCTYPE directly? Anybody knows?
    Got the idea from: Re: How can I read color from frond-end PC

  • Looking for a Fully Functional HTML 5 Audio Player that has a playlist capability

    Does anyone know how to build, find or purchase a full functioning HTML 5 Audio Player that has a playlist. I have found the small single mp3 player but I am looking for a full functioning Audio Player that can load and play several tracks from an album etc. I see beautiful HTML 5 Video players everywhere but it seems no one has figured out how to make an awesome Audio Player that plays multiple songs. Help

    You can try these :
    http://amazingaudioplayer.com/how-to-insert-an-html5-audio-player-to-your-webpage-with-ifr ame/
    http://www.musegrid.com/adobe-muse-widgets/audio-widget
    http://www.muse-themes.com/blogs/news/8285249-embedding-a-mobile-tablet-friendly-audio-pla yer
    Thanks,
    Sanjit

  • Looking for examples of the Exchange Page

    Hey! Any Body??
    I am looking to display data like on the Exchange page with
    logo and links in the tables. Does any one know of where I can
    start looking for something like that? I like the layout of the
    Exchange page. If any of you know something please let me know.
    thanks.

    You can find several examples that will work with the DAQCard-1200 at zone.ni.com/libraries/.
    Then look under Data Acquisition. There are also examples that ship with
    LV and NIDAQ. Look in ...\Labview\examples\daq\anlogin\.
    "david frazao" wrote:
    >Thank you , if you can help me by sending VI examples for the 1200 daq-card>,
    with 2 or mores inputs>>

  • Toolkit for CreateJS showing blank HTML pages after publish on only some Flash projects?

    When I used Toolkit for CreateJS on Flash CC for the first time on a simple test movie, it worked fine. I've now created a new movie of a scrolling portfolio banner to go on my homepage. After hitting publish, it only shows a blank HTML page, with a white box the size of the stage.
    I even tried it again when removing the buttons and tweens and still no joy. Is there a way I can upload both files to show you and to see if there's a difference in which why the newer one isn't working. Both have more than one layer. The test one moves out of the screen, while the new one fades out. I've even tried putting an alpha effect on the test to see if it doesn't play, but it still works fine.
    Please help.
    Thanks
    Adam

    Do you see any errors listed in the output panel?

  • Safari hangs up, seems like it is looking for something, when it opens page

    Hello,
    I have tried everything, safari upon opening takes sometime to open a page, once that page is open, it is somewhat quick to open other pages within that page, but when going to different pages the same delay happens,
    it looks like safari might be looking for an ip addy? I am using airport and have also tried everything as far as resetting, setting up new locations?

    If Safari is getting very slow:
    (Presumably you regularly empty your Safari cache and clear your History)
    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296
    If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
    You could also try these codes as well: 4.2.2.1 & 4.2.2.2
    If you use a Router, make sure it has the latest firmware installed.
    One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x
    This is described here:
    http://support.apple.com/kb/TS3408?viewlocale=en_US
    If Safari seems to hang for ages:
    If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
    Open the Terminal from the Utilities folder in /Applications and type
    killall -9 WebKitPluginHost
    Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
    Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The latest versions of Flash 10.1 appear to have improved the situation somewhat, but haven't completed eliminated it.

  • Looking for CRM Middleware Training

    Folks,
    Can anyone recommend any institutes in the US for CRM middleware training other than SAP Education ?
    Thanks much.

    Hi Sundar
      There is a study material for Middleware CR-555.Am not sure whether you can download it.
    Cheers

  • [Solved] Looking for arch's original man page color codes

    Hey everyone. I'm new to arch, and enjoying having everything begin to work out for me. One thing I was wondering though is what the color codes are that the man pages use before X is loaded or anything similar.
    Per the archwiki, I'm using the following to provide myself with colored man pages in urxvt:
    From .Xresources:
    ! colored man pages on rxvt-unicode-256color
    URxvt.colorIT: #87af5f
    URxvt.colorBD: #d7d7d7
    URxvt.colorUL: #87afd7
    This works, but it's not the same colorscheme as what arch starts out with initially. Anyone know what that colorscheme is? Or where I could look to find it?
    Last edited by zematis (2014-05-12 22:21:30)

    ayekat, thanks for the warm welcome!
    ayekat wrote:What article in the wiki?
    Here's the section in the Wiki I was referring to:
    https://wiki.archlinux.org/index.php/ma … vt-unicode
    karol wrote:Are you talking about using man pages before installing Arch or after installing but in the tty? Do you want to get the same colors in X?
    (I think) I was talking about the colors that the man pages are in the TTY. Specifically, my processes is:
    Boot up arch
    Login (X yet not started)
    Look at a man page - like the colors
    Startx - boot to window manager (i3)
    Look at a man page - want to change the colors
    That said, I liked the colors the man pages had before installing Arch quite a bit, and wouldn't object to learning what those are.
    ayekat wrote:Here you are changing how urxvt displays characters that are marked as underline, italic or bold; in particular you are changing their colours.
    The thing is, it won't only affect man pages viewed in urxvt, but everything.
    Makes sense
    ayekat wrote:As for changing the colour scheme of the manpage, you'll probably want to do it more properly, using the LESS_TERMCAP environment variables.
    I tried copying your format to my .bashrc and it worked great! So that's a win. Now I just need to figure out what the '\e[#;#;#m' numbers mean. I think I can probably handle that one on my own though. I found a resource here at:
    http://misc.flogisoft.com/bash/tip_colo … ng#colors2
    And it looks like it covers what I need to know.
    Thanks for your help!
    And honestly, at this point I think I can figure out what colorscheme I like given the info at hand. So I think we can call this one taken care of.
    If it interests anyone, I found a .sh script at the above link to display all 256 colors, then modified it to show the colors bolded, italicized etc. Here's the script:
    #!/bin/bash
    # This program is free software. It comes without any warranty, to
    # the extent permitted by applicable law. You can redistribute it
    # and/or modify it under the terms of the Do What The Fuck You Want
    # To Public License, Version 2, as published by Sam Hocevar. See
    # http://sam.zoy.org/wtfpl/COPYING for more details.
    for coltype in {0..8} ; do # Bold, Italic etc.
      for fgbg in 38 48 ; do #Foreground/Background
        for color in {0..256} ; do #Colors
          #Display the color
          echo -en "\e[(0${coltype});(${fgbg};5;${color}m ${color}\t\e[0m"
          #Display 10 colors per lines
          if [ $((($color + 1) % 10)) == 0 ] ; then
            echo #New line
          fi
        done
        echo #New line
        echo #New line
      done
      echo #New line
    done
    exit 0

  • Looking for a convertor from HTML to PDF with J2SE

    Hi all,
    My current project would generate some XML data and display it on the web. Needless to say I have to prepare a matching set of XSL to transform the XML into HTML. I got that part done.
    However, my project also requires a PDF output of the same XML data for download. Well, I planned to do the XSL-fo stuff on it as well. But at some point the client thought since new kind of XML data may be added and it's too troublesome to maintain 2 sets of XSLs, they are requesting a converter to translate HTML directly into PDF now.
    I've searched the web, and found a few converter. But all of them are written in C and can't be embeded directly into my Java code. And my servlet might not have rights to call an external program on the production machine.
    I would appreciate very much if anyone can share their experience on similar issue, using a Java component to convert HTML into PDF. Suggestion of commercial products or open source freeware are all welcome.
    Thank you very much.

    HTML to PDF with Java, using OpenOffice.org - example here: [http://www.dancrintea.ro/html-to-pdf/|http://www.dancrintea.ro/html-to-pdf/]
    You can use OpenOffice.org, running as a server and command it remotely for document convertion.
    Besides HTML to PDF, there are also possible other convertions:
    doc --> pdf, html, txt, rtf
    xls --> pdf, html, csv
    ppt --> pdf, swf
    Code example:
    import officetools.OfficeFile; // this is my tools package
    FileInputStream fis = new FileInputStream(new File("c:/test.html"));
    FileOutputStream fos = new FileOutputStream(new File("c:/test.pdf"));
    // suppose OpenOffice.org runs on localhost, port 8100
    OfficeFile f = new OfficeFile(fis,"localhost","8100", true);
    f.convert(fos,"pdf");
    -----------------------------------------------------------------------------------------------------------------------------------------

  • Hotkey for switching between open html pages similar to Apple+Tab for apps

    Is there a hotkey combination which can switch between open html documents in the same way Apple+Tab switches between open applications?
    In Windows it is possible to switch use ALT+TAB to switch between various open Firefox windows which are displayed as options along with other open applications -- but OSX seems to limit choices only to applications, and not their various windows. ?
    Thanks

    Hmm...sorry...just switched yesterday afternoon...this combo though doesn't seem to be working for me in either Firefox or Safari...tried Command+< also with the SHIFT key for '<' but to no avail.
    Mind if I ask a two more simple questions though? How can the touchpad be setup to automatically register a click by tapping on the touchpad rather than the button beneath it...and...is there a hotkey combo which would take a person back to the beginning of a text field, similar to 'Home'? Haven't yet figured out how to make the arrow with "home" on it actually send the cursor back to "home"...
    many thanks

  • How to generate a html page when a button is pressed

    hi
    i have to generate a html page when a help button is pressed
    so please help me
    thanks
    shiva

    "touch index.html"
    Might not be what you're looking for but creates an html page.

Maybe you are looking for