Looking For Direct Patch Update for FC6

Hi Gang
I'll have to reformat my system drive again, and rather than download the Update for FC6 from the 'Software Update' method, I'd like to downlaod the patch directly. I inadvertently downlaoded the new Safari, with all the JAVA updates (very problematic). I should have left it alone. No recourse but to reformat.
Could someone please point to the link for FC6 update from Apple? I'm trying to understand the process of avoiding these so-called 'Input Managers' which could add strange 3rd party add on's, (very problematic).
Thank you
Mike

I would recommend using the Software Update app method. That will scan your system and only display the necessary updates. Then after installing one wave of updates, run Software Update again until you've got everything installed.
For the record, it appears that Apple does have all of the ProApp updates available on their download servers for Final Cut Studio 2.
The reason for my keeping a personal archive was that our editing systems here cannot be updated every time an update is released. This is due to the many different third party systems/servers that need to be qualified/updated before applying a ProApp update. And since that cycle can take a while, it was important for us to be able to keep all of our editing systems on the same versions. For some reason, Apple would only allow the most current update to be downloaded separately, since older versions were no longer supported. That doesn't work well for an enterprise environment.

Similar Messages

Looking for a site that shows problems with windows patches or updates.

Looking for a site that shows problems with windows patches or updates...so I know what not to install.
Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
that does it with expertise.
Which forums would be best to look for such problems.
Thanks in and advance for suggestions

Hi,
I agreed with Cyber and Rick.
Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
Although there might be some problems when installing it, Windows update is not the one to blame.
For troubleshooting Windows updates, if needed:
Fix Microsoft Windows Update Issues
http://support2.microsoft.com/gp/windows-update-issues
Best regards
Michael Shao
TechNet Community Support

HT204350 I am trying to transfer files from MacBook running OSX 10.7.5 toIMac running OSX 10.9.1. I verified all software updates installed. Both connected directly by ethernet cable. On the IMac I get "Looking for other sources". On MacBook get "look

I am trying to transfer files from my MacBook (source) running OSX 10.7.5 to my IMAC (target) running OSX 10.9.1. Machines connected by ethernet cable. On Target machine I get "Looking for other sources" and on source machine I get "Looking for other computers". Both have clockwise spinning wheel.
Looking for advise.
Thanks
Luap N

If you are connecting the two computers directly to each other with an ethernet cable, you need a special "crossover" cable to swap the send/receive pins so the data sent from one computer arrives on the "receive" pins on the other end of the cable, not on the "send" pins that you get with a straight cable.
Incorrect, you do not need a special crossover cable. Any cable will do.

Look for APIs or editor to update LDT files to avoid editing file directly

I have used FNDLOAD to import/export ldt files, but I am looking for APIs or "editor" to avoid editing the LDT file directly. Mainly need to customize program name, request group name, etc. for multi clients. Any ideas? thanks!

Harm,
thanks for your comment.
Your understanding was absolutely right.
Sorry my mistake its QNAP 639 PRO, populated with 5 1TB, one is empty.
So for my understanding, in my configuration you suggest NOT to use RAID-0. Im not willing to have more drives in my workstation becouse if my projekts are finished, i archiv on QNAP or archiv on other external drive.
My only intention is to have as much speed and as much performance as possible during developing a projekt
BTW QNAP i also use as media-center in combination with Sony PS3 to run the encoded files.
For my final understanding:
C: i understand
D: i understand
E and F: does it mean, when i create a projekt on E, all my captured and project-used MPEG - files should be situated in F? Or which media in F you mean?
Following your suggestions in want to rebulid Harms-Best Vista64-Benchmark comp to reach maximum speed and performance. Can i use in general the those hardware components (exept so many HD drives and exept Areca raid controller ) in my drive configuration C to F. Or would you suggest some changings in my situation?

I am receiving an error message every time I try to update my iPod software. Is there something I should be looking for? Thanx, Dennis Morris

am receiving an error message every time I try to update my iPod software. Is there something I should be looking for? Thanx, Dennis Morris

Follow the directions for resolving the error if it is listed here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
If not listed, com back with what the error says.

Kernel patch updation for solaris 10 x86

I have Solaris 10 06/06 installed on x86 machine which is using svm and clustered with another node. The kernel revision is 118855-19 from the uname -a output. I am looking for the kernel patch updation and I heard 118855-36 is the latest one. Shall I go ahead with this patch and what r the dependency patches for this.
If anyone done this please guide me..

Patch 118855-36 is the latest kernel patch for Solaris 10 on x86 and its dependencies are:
113000-01 117435-02 118344-14 119043-09 119255-14 121264-01 122035-01 123840-01 (or greater)
Whether you should go ahead and install the patch is up to you, if possible try it out on a test box first. For better advice on this matter, I would suggest posting in the Solaris 10 forum as this forum is for the Sun Update Connection, Patch Manager & PatchPro toolsets.

Kernel patch update for solaris 10 x86

I have Solaris 10 06/06 installed on x86 machine which is using svm and clustered with another node. The kernel revision is 118855-19 from the uname -a output. I am looking for the kernel patch updation and I heard 118855-36 is the latest one. Shall I go ahead with this patch and what r the dependency patches for this.
If anyone done this please suggest and guide me..

For Solaris 10 x86 the latest offered with smpatch is 125101-07 and yes it may be recommended to patch. Then again you said clustered with sun cluster? You may want to check the documentation and if your machines aren't facing the internet you may wait for 7/07 to hit the street and do an upgrade.

Looking for information on best practices using Live Upgrade to patch LDOMs

This is in Solaris 10. Relatively new to the style of patching... I have a T5240 with 4 LDOMS. A control LDOM and three clients. I have some fundamental questions I'd like help with..
Namely:
#1. The Client LDOMS have zones running in them. Do I need to init 0 the zone or can I just +zoneadm zone halt+ them regardless of state? I.E. if it's running a database will halting the zone essentially snapshot it or will it attempt to shut it down. Is this even a nessessary step.
#2. What is the reccommended reboot order for the LDOMs? do I need to init 0 the client ldoms and the reboot the control ldom or can I leave the client LDOM's running and just reboot the control and then reboot the clients after the control comes up?
#3. Oracle. it's running in several of the zones on the client LDOM's what considerations need to be made for this?
I am sure other things will come up during the conversation but I have been looking for an hour on Oracle's site for this and the only thing I can find is old Sun Docs with broken links.
Thanks for any help you can provide,
pipelineadmin+*

Before you use live upgrade, or any other patching technique for Solaris, please be sure to read http://docs.oracle.com/cd/E23823_01/html/E23801/index.html which includes information on upgrading systems with non-global zones. Also, go to support.oracle.com and read Oracle Solaris Live Upgrade Information Center [ID 1364140.1]. These really are MANDATORY READING.
For the individual questions:
#1. During the actual maintenance you don't have to do anything to the zone - just operate it as normal. That's the purpose of the "live" in "live upgrade" - you're applying patches on a live, running system under normal operations. When you are finisihed with that process you can then reboot into the new "boot environment". This will become more clear after reading the above documents. Do as you normally would do before taking a planned outage: shut the databases down using the database commands for a graceful shutdown. A zone halt will abruptly stop the zone and is not a good idea for a database. Alternatively, if you can take application outages, you could (smoothly) shutdown the applications and then their domains, detach the zones (zoneadm detach) and then do a live upgrade. Some people like that because it makes things faster. After the live upgrade you would reboot and then zoneadm attach the zones again. The fact that the Solaris instance is running within a logical domain really is mostly besides the point with respect to this process.
As you can see, there are a LOT of options and choices here, so it's important to read the doc. I ***strongly*** recommend you practice on a test domain so you can get used to the procedure. That's one of the benefits of virtualization: you can easily set up test environments so you cn test out procedures. Do it! :-)
#2 First, note that you can update the domains individually at separate times, just as if they were separate physical machines. So, you could update the guest domains one week (all at once or one at a time), reboot them into the new Solaris 10 software level, and then a few weeks later (or whenever) update the control domain.
If you had set up your T5240 in a split-bus configuration with an alternate I/O domain providing virtual I/O for the guests, you would be able to upgrade the extra I/O domain and the control domain one at a time in a rolling upgrade - without ever having to reboot the guests. That's really powerful for providing continuous availability. Since you haven't done that, the answer is that at the point you reboot the control domain the guests will lose their I/O. They don't crash, and technically you could just have them continue until the control domain comes back up at which time the I/O devices reappear. For an important application like a database I wouldn't recommend that. Instead: shutdown the guests. then reboot the control domain, then bring the guest domains back up.
3. The fact that Oracle database is running in zones inside those domains really isn't an issue. You should study the zones administration guide to understand the operational aspects of running with zones, and make sure that the patches are compatible with the version of Oracle.
I STRONGLY recommend reading the documents mentioned at top, and setting up a test domain to practice on. It shouldn't be hard for you to find documentation. Go to www.oracle.com and hover your mouse over "Oracle Technology Network". You'll see a window with a menu of choices, one of which is "Documentation" - click on that. From there, click on System Software, and it takes you right to the links for Solaris 10 and 11.

New patch update (build 282) for Oracle VM Manager 3.0.3

We have a patch update for Oracle VM Manager 3.0.3. Customers can download it by following instructions from OTN download page:
http://www.oracle.com/technetwork/server-storage/vm/downloads/index.html
Or go directly to the link below:
Oracle VM Manager 3.0.3 Patch Update from My Oracle Support, patch ID 13614645
This patch update provides additional bug fixes (please review the README), and includes all the accumulative bug fixes delivered in the previous patch updates.
Oracle VM Manager Update Instructions
Oracle VM Manager 3.0.2 or 3.0.3 can be upgraded to this Oracle VM Manager 3.0.3 patch update. Unzip the patch file on the server running Oracle VM Manager and execute the runUpgrader.sh script.
# ./runUpgrader.sh
Please refer to Oracle VM Installation and Upgrade Guide for details.
Upgrade Oracle VM Servers
It's highly recommended to update Oracle VM Server 3.0.3 with the latest patch update. Please review Oracle VM 3.0.3 User Guide http://docs.oracle.com/cd/E26996_01/e18549/BABDDEGC.html for specific instructions how to use Yum repository to perform the server update.
To receive notification on the software update delivered to Oracle Unbreakable Linux Network (ULN, http://linux.oracle.com) for Oracle VM, you can sign up here http://oss.oracle.com/mailman/listinfo/oraclevm-errata.
Additional Information
Oracle VM documentation is available on the Oracle Technology Network (OTN):http://www.oracle.com/technetwork/server-storage/vm/documentation/index.html
Please refer to the Oracle VM 3.0.3 Release Notes for a list of features and known issues. For the latest information, best practices white papers and webinars, please visit http://oracle.com/virtualization

Hmm, server is not (auto?)discovered
though machines can see each other via network, all ports are opened, but agent still reports
[2011-07-28 21:07:32 6001] DEBUG (OVSNotificationServer:233) NOTIFICATION SERVER STARTED
[2011-07-28 21:07:32 6005] INFO (OVSRemaster:101) REMASTER SERVER STARTED
[2011-07-28 21:07:32 6009] INFO (OVSMonitor:29) MONITOR SERVER STARTED
[2011-07-28 21:07:32 6013] INFO (OVSHA:103) HA SERVER STARTED
[2011-07-28 21:07:33 6017] INFO (OVSStat:234) STAT SERVER STARTED
[2011-07-28 21:07:33 6021] INFO (OVSAgentServer:274) OVSAgentServer start serving!
[2011-07-28 21:07:33 6021] INFO (OVSAgentServer:275) Oracle VM Server version: {'release': '3.0.2', 'date': '201109270901', 'build': '75'}
[2011-07-28 21:07:37 6009] DEBUG (OVSMonitor:46) Cluster state changed from [Unknown] to [Offline]
[2011-07-28 21:07:37 6009] DEBUG (OVSMonitor:50) Error sending notification: Cannot get manager URL from agent db.
[2011-08-14 23:30:58 13993] DEBUG (agtctl:95) master flag: None
A slight off-subject question, do I need to run anything on OVM (apart from setting on all servers the same password)?

Looking for a bios update for the Acer aspire M1641 Motherboard

Looking for a bios update for the Acer aspire M1641 Motherboard All I could find was one for the acer aspire M1640 Which has a different board number but is as close as i can get to it. Is this the right one? If not would anyone be able to point me in the right direction? Thanks.

@IronFly: The old website is always useful!

Error when looking for updates

in the past 2 days when i try to search for updates in the app store app, i get this message:
"The operation couldn't be completed. NSURLErrorDomain error -1100
what does this mean? it just started doing this so im not sure, i havn't installed anything in over a week . anyone having this problem or solutions to it? thanks everyone

Most of use are having the same issue. It's an Apple problem that we just need to wait until they fix it.
In the mean time, if you were looking for the iTunes update, you can download it direct from here:
http://support.apple.com/kb/DL1576

Looking for patch for Java RTS 2.1 for Solaris 10 u7

Hello,
I am looking for the patch that allows me to run Java RTS 2.1 (2.2 as well) on Solaris u7. I see that 2.1 is supported on u4 and u5 and 2.2 is supported on u5 and u6. I am currently using u7.
Thanks!
Scott

Hi Scott,
You don't need any patches to run JRTS 2.1 or 2.2 on Solaris 10u7. I think the latest 2.2 early access supports update 7 "out of the box" (if not 2.2 GA will). For earlier releases all you need to do it tell the cyclic driver package installation to ignore the difference in the Solaris version - it will warn you that the versions don't match and ask you if you want to continue anyway.
If that's not the case please report what errors you are seeing.
Thanks,
David Holmes

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

My server keeps telling me that I have an update for 10.10.1 and that I should look for it in the app store. I do that and am not finding anything that makes the update notification go away. I have installed an update the app store says I need.

I updated to Yosemite on my Mac mini/server. Then my server wouldn't work. I updated and bought the software needed when updating to Yosemite. The server seems to be working. Subsequently I've started getting a notification on the server icon that an update is needed. When i look for details I'm instructed to go to the app store. I've done that. In the updates category no update is found by the app store system. I then went to the purchases category and was informed I needed to install the server software I'd purchased. While I'd installed before, I did it again. I still have the 1 in a red circle covering part of the server icon. I have restarted the mac mini. I can't figure out what step I'm missing. The continued presence of the red circle suggests that the software still isn't installed. Looked into restarting the server in help but don't find clear instructions that make sense. Suggestions from someone who has a mac mini server and has worked with this topic would be greatly appreciated. General comments from anyone who has not looked at this kind of problem before might turn out to be unenlightening for this neophyte.

I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine.

Looking For Direct Patch Update for FC6

Similar Messages

Maybe you are looking for