Looking for Driver for HP 3500 Color Laserjet for Windows 7. Is there a Generic I can use?

I've been checking HP for 18 months and can never locate a driver for this Printer. Does anyone have any suggestions?

Hi,
Unfortunately your product is not supported by Windows 7, and will not be supported in the future, as you may find by the document below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Filters for Blown out camera and color shots for CS5

    What are some good filters to fix blown out camer and color shots in CS5?
    Thanks,

    Hi Bill, Here's the link the of the blown out footage. http://www.youtube.com/watch?v=4lxJJN2PgqM&feature=youtu.be
    Date: Wed, 18 Jul 2012 17:20:37 -0600
    From: [email protected]
    To: [email protected]
    Subject: Filters for Blown out camera and color shots for CS5
        Re: Filters for Blown out camera and color shots for CS5
        created by Bill Hunt in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    Well, a few Effects, that might help - a little, would be Curves, Levels and Shadow & Highlight, along with the Three-way Color Corrector. However, the success will depend on the footage. Can you post a Vimeo, or YouTube example, as once one sees what you are working with, they may have other ideas. Good luck, and welcome to the forums, Hunt
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4566208#4566208
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4566208#4566208. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • LJ 3500 color printer and Windows 7

    Greetings everyone,
    my 3500 color LJ is a great printer and I have enjoyed its use. The printer is physically attached to a computer running XP Pro SP3. I was using the printer from my desktop system through a network until I upgraded my desktop system to Windows 7.
    Right now I create a PDF for any printout I need in color and go to the other computer to print it. Some exercise is the only benefit to that.
    Are drivers for windows 7 going to become available? Can I use Vista drivers? Has anyone any work arounds I could try?
    thank you,
    JohnHF

    Hi @JDG1607, 
    I see that you are having issues networking the printer to the one computer running Windows Premium.
    I can help you.
    Print a configuration page to get the printer's IP address. Printing a Network Configuration Page.
    Try and access the Embedded Web Server for the printer on the Windows Premium.
    Type the IPV4 address into your web browser's address bar. (Internet Explorer)
    Did it load the page?
    Check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
    Go to start, type run in the search box, type in cmd, then type ipconfig.
    Check the IPV4 address.
    Now check the IPV4 address for the printer.
    Do the first 3 sets of numbers match?
    Try and ping the printer.
    In the same window, type ping printers IP address (space between ping and IP address)
    What are the results?
    If everything checks out there, it could be your Antivirus stopping it from finding the printer.
    Temporarily disable it and try the installation again.
    You might need to power cycle everything.
    If you are still having issues, install the printer on this computer as a USB connection and then setup the network connection.
    Installing the Printer Software on a Wireless or Wired (Ethernet) Network Connection.
    Go to Step two: Change from a USB connection to an Ethernet connection (optional).
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

    HP Color LaserJet CP2025  / Windows 7(64bit)-Why the printer does not print color letters??

    Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

  • I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog.  Is there any way I can use the apple tv on analog cables?

    I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog.  Is there any way I can use the apple tv on analog cables?

    Welcome to the Apple Community.
    It's do-able, but I don't think it's a great idea.
    DVI
    Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
    Analogue
    There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
    HDCP
    HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
    Resolution and aspect ratio
    I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
    DAC
    DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

  • I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

    i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

    Hi champrider,
    You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
    OS X Mavericks: Allow access using Apple Remote Desktop
    This help page will provide you with some other useful resources for Apple Remote Desktop -
    Remote Desktop Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

    I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

    Depends on what you had
    If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
    If you had any version of iPhoto '11 then you can install for free from the App store
    If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
    If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
    LN

  • I have only had my iphone 5s for two months and the charger has stopped working. Is there anyway that I can recieve another.

    I have only had my iphone 5s for two months and the charger has stopped working. Is there anyway that I can recieve another.

    take it to an Apple store genius bar ,it has 12 months warranty and they will check it out

  • For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.  I there a way I can restore the original function?

    For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.
    I there a way I can restore the original function?

    You do not tell us what OS version you have. In OS 10.8.2, do this:
    Apple Menu / System Preferences / Language and Text / Input Sources.
    Select the language you want. Mine is set to Canadian English.

  • I bought a iTunes card and when I scratched it for the code I scratched of the numbers is there any way I can use the card ?

    I bought a iTunes card and when I scratched it for the code I scratched of the numbers is there any way I can use the card ?

    iTunes Store: Invalid, inactive, or illegible codes - Support - Apple

  • I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I took away my backup disk with me so just took it from there excellent. I am back home at present working on my imac. When I go to use my macbook air on these projects (when away on boat) is it easiest to simply copy the Project and Events folders in total from my imac onto the other machine and do the same upon my return in reverse? I don't use icloud

  • Is there a way I can use Protanopia (Color Blind) profile as a regular profile that I can convert

    I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
    Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?

    There are profiles involved, but I don't think they exist as separate files, and are licensed in a way that I don't think allows for redistribution.

  • Is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ?

    is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ? because i dont have that much memory and i wanted my external hard drive to be the source for my music files and not my computer.

    Many users keep their iTunes libraries on external drives. You just have to remember to connect and power up the drive before launching iTunes.
    iTunes for Mac: Moving your iTunes Media folder:
      http://support.apple.com/kb/HT1449 

  • Color Laserjet 2600n Windows 7 -64 Bit Looking for HP Toolbox

    ‎01-09-2014 08:30 AM
    I'm having trouble finding the HP Toolbox.    I have a Color Laserjet 2600n.   OS is Windows 7 - 64 Bit.  When I print checks, I notice a slight shadowing of the numbers.  Thinking it may need cleaned, but I cant find my toolbox anymore and have to tried to look online.  I saw something regarding there was no toolbox for Windows 7.  Is this still the case?  When I print on paper everything looks fine.  Also, anything I print that has red in it doesnt not print very well.  This has been a problem for several years.   I had XP until March 2013 and then got a new computer.  Before the computer switch I cleaned and aligned the printer several times, but still no red print.
    Thanks,
    pdl2

    You should try the HP Universal Print Driver (UPD), which does list your device model as supported by the driver.  Go to www.hp.com/go/upd, hit the DOWNLOAD SOFTWARE.  Select a Windows 7 x64 OS, then I recommend trying the PostScript (PS) driver.  The installer will prompt a few questions-- select "Traditional Mode", provide your port information, etc, proceed. 
    Though I am an HP Employee, my posts express my opinion, and not of HP

  • Driver for HP Color Laserjet 1600 Windows 10 Pro 64 Bit

    When will a driver be made available for the HP Color  Laserjet 1600 for Windows 10 64 bit?  It printed fine with Windows 8.1, but since the updgrade to Windows 10 it will not print at all. Thanks, JN

    I have answered my own question or found a temporary fix until an official driver is released. After a few hits and misses with different HP Color Laserjet Drivers,  I downloaded the  HP LaserJet USB (DOT4) communication driver for Windows 8 and Higher (64-bit) located at the below link.  It is listed for the HP Color LaserJet 3700 Printer but it worked for the HP Color Laserjet 1600 as well.  Hope this will help someone.  http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=315850&swLangOid=8&swEnvOid=4192 Thanks, JN

Maybe you are looking for