Looking for driver for intel GMA 3650

colours of background images of websites are all mapped to white and as such are invisible.
I guess the reason could be that the last event of the WIN 10 microsoft basic diplay adapter driver install was: Das Gerät "PCI\VEN_8086&DEV_0BE2&SUBSYS_40121297&REV_09\3&11583659&0&10" erfordert weitere Installationen.
If it wants to install further driver stuff this can only be the driver for the INTEL intel GMA 3650 graphic accelerator chip,
which is present on my motherboard.
my OS Win 10 tech preview build 9926

Hi HB9RUZ,
If your Network connection is well and IE could open webpage correctly, you may find the proper driver on the Intel Website:
http://www.intel.com/p/en_US/support/highlights/graphics/gma3600
Please note: As this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Or if you would like to update the driver, you may take use of Device Manager:
Update or Change a Device Driver
Further, as Team Zigzag suggested, if you would like to upgrade to Windows 10 Build 10041, please check for your updates.
For reference:
Windows 10 Technical Preview Build 10041 now available
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Looking for driver for WebCam V-UAE13

    i am looking for driver for WebCam V-UAE3. Please help!

    I took the time to look it up for you.
    http://forums.driverguide.com/showthread.php?p=8524
    Go to that link, inside is a link to the manufacturer's website with the driver AND another link where you can download the driver.
    Hope that helped.

  • Looking for driver for ven_1093&dev_c801 for xp sp3

    I have a PXI-8105 I have been asked to rebuild the drive for. I have downloaded the driver file from the NI web site and got the ethernet card and a video card driver to install. I still show 4 other drivers not installed. One is the VEN_1093&DEV_C801, which shows up as a simple communications controller. There are 2 unknowns and another vga controller. I tried to install the NI web sites Chipset driver but that did not seem to fix any drivers. Any help would be very appreciated.
          One of the unknows is acpi\nic7018\4&c7dc4fc&0 the other is acpi\nic7019\4&c7dc4fc&0
         The other vga is ven_8086&dev_27ae    8086 is intel and 27ae is 945 chipset.
    Solved!
    Go to Solution.

    Gallantm:
    All of the peripheral drivers for our controllers are posted on this page. Please let me know if you have any more questions. Have a nice day.
    Tori W.
    National Instruments

  • I am looking labview driver for Tektronix TLA704 logic analyzer

    I need this labview driver desperately, I am very appreciated if you have it and courtesy me a copy.
    Thanks
    Tys
    [email protected]
    phone: 214-480-0902

    I did some looking around on the Tektronix web site.
    Tek does not seem all that interested in supporting the
    TLA704 in particular, or LabView(tm) for logic analyzers
    at all. IMHO the Tek site sucks when you need to find
    information in depth.
    I looked through National Instruments site too. Now on this
    site it was easy to find what I was looking for. Good job.
    Developing a LabVIEW instrument driver for a logic analyzer
    looks to be a non-trivial task for anything more involved than
    starting a capture and waiting for the data to log. Depending
    on the driver it could be real slow getting a load of data from
    the logic analyzer.
    It might be better to use the TLA programmatic interface
    (TPI) to run the TLA704 by remote control over the Ethernet.
    All the support for this comes with the analyzer software.
    Though it's really painful to get it setup in Windows 98.
    This way you could create a Windows program that runs
    on your workstation to connect to the TLA704, set it up,
    start a run, and download the data. Once the data is in
    your workstation you can reformat for use by LabView.
    I don't know that this would be easier than making a
    LabVIEW instrument driver for a logic analyzer, but
    at least all the software exists right now to control
    the TLA704 remotely.
    Charles.
    I don't work for National Instruments,
    or Tektronix or use LabView. But I use
    logic analyzers way too much.
    "Randy Solomonson" wrote in message
    news:[email protected]...
    > Hello-
    >
    > Unfortunately I was unable to find a driver for this instrument either
    > at http://ni.com/idnet. This leaves you with one of a couple options.
    > It may be possible to modify an existing driver to work with this
    > instrument. Otherwise, http://www.ni.com/devzone/idnet/other.htm
    > states a few options to obtaining a driver. Drivers are developed
    > based on demand and popularity so the more requests, the greater the
    > possibility that one will be developed. It would also be beneficial
    > to notify the instrument manufacturer.
    >
    > Randy Solomonson
    > Application Engineer
    > National Instruments
    >

  • Looking for Driver for HP 3500 Color Laserjet for Windows 7. Is there a Generic I can use?

    I've been checking HP for 18 months and can never locate a driver for this Printer. Does anyone have any suggestions?

    Hi,
    Unfortunately your product is not supported by Windows 7, and will not be supported in the future, as you may find by the document below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • [SOLVED] Black Screen in new Installation (Intel GMA 3650)

    Hi everybody,
    I installed Arch on my new DN2800MT system using the Archboot installer (2012.04-2) for UEFI boot support. GRUB2 is running fine after all. The only problem is, that the screen turns black/completely off during the boot process. The installation seems to work in principle: if I wait a while, log in and type "shutdown -h now" or "reboot" the system shuts down or reboots. Just the output seems to be broken.
    A video can be found on YouTube. A screenshot immediately before it turns black:
    The last lines are
    :: Waiting for UDev uevents to be processed
    [ 6.444167] gma500 0000:00:02.0: GPU: power management timed out.
    Interestingly the boot of the Archboot DVD also starts with the screen turning black. Some time later the the boot process seems to fix the issue at hand: the screen comes back alive. I also posted a video of that process on YouTube. The messages on the screen when it turns back on:
    This behavior of Archboot indicates that this problem can be solved somehow. I would appreciate every hint on what's wrong a lot. For modification of the installed system I can boot Archboot, mount the installation and chroot into it.
    Thanks a lot guys!
    Alphasix
    Last edited by alphasix (2012-06-25 21:43:00)

    alphasix wrote:
    Yeah you're right: it's totally hopeless. I now basically have two options: using an old AIF to install an older version of arch with a local repo, kernel <= 2.6.37 and Xorg <= 1.9 to get the old Intel poulsbo driver running or using Windows 7. I think the latter is the better choice.
    There is only one very faint hope for a crazy solution: in the dependencies of the old pulsbo driver itself the kernel version isn't mentioned. What do you think of the idea of using the new gma500_gfx module with fbdev for xorg and the old binary driver just for VAAPI? VAAPI is in principle independent of xorg. So in theory this works, right?
    [EDIT] This crazy idea has one flaw: the old drivers are i686-only (because of the binary blobs). At that time all systems with poulsbo graphics controller were 32-bit so that is reasonable. I impudently asked Intel support for the two binary blobs compiled for 64-bit. I mean: they sell a fully integrated system incompatible with their own binary driver for linux. Let's wait for the answer. If they turn me down, it means bye-bye to Linux .
    I just received (today) a CedarTrail Netbook (Atom N2800) and discovered with horror that the graphic chipset is not supported. Please let me know if Intel will give you an answer since I was thinking of directly contact them too.
    Btw, how did you contact them, can you give me a mail/website/other?
    Thanks

  • Is there a  for driver for HP c 3100 all in one  on tiger 10.4.11

    Is there anywhere I can get a printer driver for a HP C3100 all in one printer that will work with tiger 10.4.11?

    Hi,
    Might try this...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-53118-1 &lc=en&cc=us&dlc=en&product=1146331&os=219&lang=en

  • Required type for driver for foxpro

    i want make a stand application using foxpro at backend as database..
    i want to use the native driver of foxpro intead of dsn..
    what is the driver for that and what is the code to use that..
    urgently required

    thanx for ur sugession..i downloaded that ..and configured that ..
    but i am facing a problem i m giving u code and exception kindly help me.
    exception is as follows
    E:\javaapplications>java Client
    Server not ready.
    Exception in thread "main" java.sql.SQLException: Attempt to connect to database
    failed
    at acs.jdbc.e.<init>(Unknown Source)
    at acs.jdbc.Driver.connect(Driver.java:114)
    at java.sql.DriverManager.getConnection(DriverManager.java:517)
    at java.sql.DriverManager.getConnection(DriverManager.java:177)
    at Client.main(Client.java:15)
    code is..
    import java.io.*;
    import java.util.Properties ;
    import java.sql.*;
    import java.net.URL;
    public class Client
         public static void main(String args[]) throws IOException, ClassNotFoundException,
    SQLException
              Class.forName("acs.jdbc.Driver");
              String url ="jdbc:atinav:client2:1010";
    /* machine_name is the name/IP of the machine the Server Engine is running and 1010 is the port
    number*/
              Connection cn = null;
              cn = DriverManager.getConnection(url,"atinav","acs");
              Statement stmt = cn.createStatement();
              boolean act = stmt.execute("select * from salt");
    /* table1.dbf is the DBF file containing the table table1*/
              ResultSet rs ;
              rs = stmt.getResultSet();
                        while(rs.next())
                             System.out.print("hwllo");

  • Looking for driver for Yokagawa UP-550 progammable controller

    we build high temp vacuum furnaces. I have an order in-house now that requires a Yokagawa UP-550 controller and so we need a driver. I also need to find what programmable temperature controllers have drivers already developed. We use Eurotherm (2404/2604/2704), Honeywell(UDC-3300/UDC-2300/HC-900),and Yokagawa instruments(UT-350/UT-550/Up-550/UP-750). We also use Mitsubishi PLC's(FX2n) that we need drivers for. Also use Pfieffer and Granville Phillips vacuum controllers that need drivers.

    Hello,
    You can go to:
    http://zone.ni.com/idnet97.nsf/ instrumentdriverrequest/
    to request a instrument driver. If you have any specific questions, please call us or send us an email through:
    http://www.ni.com/support/
    Mika Fukuchi
    Applications Engineer
    National Instruments

  • Looking for driver for Addtron AWU-120 wireless USB

    Does anyone happen to know how we can get this gizmo to work on my wife's eMac?
    The company seems to have disappeared, but the drivers must be around somewhere... right?

    momto3young wrote: ...Where can I get the correct files?  ...
    Follow the instructions from manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    You may also find helpful info at Boot Camp: Installing Windows 7 Frequently Asked Questions or in Apple - Support - Boot Camp
    momto3young wrote: ... How much does Apple charge for help once Apple Care runs out?
    That will depend on what service you want.  If you do not have a local Apple Store to ask, Contact Apple Support directly and ask them.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • Looking for driver for ven_1093&dev_730e for vista

    I have one device that is not recognized by windows vista.
    The device according with the device administrator is ven_1093&dev_730e.
    I am using Windows VISTA SP2

    Sorry, I have forgotten to attach the image
    Attachments:
    Image1.jpg ‏52 KB

  • Looking for driver for SOUNDBLASTER LIVE 24bit & AUDIGY SE (CA0106) Ver 5.12.01.

    Im unable to get my Audigy onboard sound running and need to try some/lots of drivers until it is stating AUDIGY in the hardware manager
    More details: http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=23993
    5.2.0.54 can anyone tell me if this is compatible? or any details/bugs etc
    Message Edited by ozprostreet on 05-07-2008 05:20 PM

    Anyone?

  • HP laser 4000n Driver for Windows 8 32bit

    I am looking for driver for hp 4000n that work with windows 8.
    This question was solved.
    View Solution.

    The recommended driver for the laserjet 4000n is the Universal Print Driver or the windows update driver. Please see the below documents for more information.
    Laserjet Products supported in windows 8
    UPD
    Install drivers included in windows 8 or windows update
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Where can i find a driver for the mac?

    Im looking for driver for this blue ray external harddrive for mac:      MATSHITA BD-MLT UJ265

    You'd need to check the mfr's website; I doubt there is one as Macs do not support Blu-Ray. However, what you do need is software to either play a movie or burn one.
    Correction: are you talking about an external hard drive?
    Or are you referring to a CD/DVD drive?
    Addendum: googled the model number - it is a burner, so you'll need software. There is Roxio Toast for one thing.

  • Driver for lightscribe DVD

    Where can I find drivers for HP DVD-RW drive ?
    While booting the system show it is loading ahci dirver.
    Install asked for language and keyboard setting and then asks for driver for CD driver.
    The DVD-RW drive didn't work for any of the BIOS sata emulation modes: "legacy IDE", "native IDE", or "RAID".

    Well, if the drive is good, then try a different SATA port.  It might be that the OS is looking for the drive per the BIOS and it is not on the SATA 0 port. BTW: Does this motherboard have 6GB SATA ports?  Do not use them for DVD drive.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

Maybe you are looking for