Looking for driver for ven_1093&dev_c801 for xp sp3

I have a PXI-8105 I have been asked to rebuild the drive for. I have downloaded the driver file from the NI web site and got the ethernet card and a video card driver to install. I still show 4 other drivers not installed. One is the VEN_1093&DEV_C801, which shows up as a simple communications controller. There are 2 unknowns and another vga controller. I tried to install the NI web sites Chipset driver but that did not seem to fix any drivers. Any help would be very appreciated.
One of the unknows is acpi\nic7018\4&c7dc4fc&0 the other is acpi\nic7019\4&c7dc4fc&0
The other vga is ven_8086&dev_27ae 8086 is intel and 27ae is 945 chipset.
Solved!
Go to Solution.

Gallantm:
All of the peripheral drivers for our controllers are posted on this page. Please let me know if you have any more questions. Have a nice day.
Tori W.
National Instruments

Similar Messages

Driver Intel HD Graphics for laptop HP 14-d039tu Notebook PC

i'm looking for driver intel hd graphics for laptop HP 14-d039tu Notebook PC with os windows 7 x86, please i need Driver Intel HD Graphics for Windows 7 x86.
This question was solved.
View Solution.

Hi:
This driver should work...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23889
Download, unzip and run the setup exe file.

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

Try the following user tip:
"Invalid drive X:\" install errors

I'm looking for driver of my hp laserjet 1006 for windows 7 ultimate

i'm looking for driver of my hp laserjet 1006 for windows 7 ultimate

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-54963-6&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Looking for driver for WebCam V-UAE13

i am looking for driver for WebCam V-UAE3. Please help!

I took the time to look it up for you.
http://forums.driverguide.com/showthread.php?p=8524
Go to that link, inside is a link to the manufacturer's website with the driver AND another link where you can download the driver.
Hope that helped.

I am looking for driver instrument for Agilent 35670A Analyzer.

I am looking for driver instrument for Agilent 35670A Analyzer (for LabWindows/CVI). Where can I find it?

Hello Kris1,
We have a LabVIEW driver for the 35670A on our website, but not a CVI driver. There is, however, a CVI driver for a 3561A (another HP Dynamic Signal Analyzer). The command sets should be similar and so you should be able to modify the 3561A's driver to work with the 35670A.
HP3561A Dynamic Signal Analyzer
Otherwise, http://www.ni.com/devzone/idnet/other.htm states a few options to obtaining a driver. Drivers are developed based on demand and p
opularity so the more requests, the greater the possibility that one will be developed. It would also be beneficial to notify the instrument manufacturer.
Regards,
Ray K
NI Applications Engineer

Looking for driver program

I'm looking for a driver program of PCI-6602 counter-board for real-time OS
VxWorks. If anybody knows a vendor of such driver program, let me know how
to get it.
Toyoji Fukui
Tokyo Seimitsu Co., Ltd.

I'd like to clarify some of the terms being used to hopefully help address your question.
When communicating with an instrument there are a couple of "drivers". For the GPIB card that is used to connect to the instruments NI has NI-488.2:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C101C?opendocument&node=132070_US
VISA is also a driver and provides an abstraction for different busses. For example, you can use a VISA driver to communicate with an instrument via serial or GPIB with the same programming API.
An instrument driver is a high level API that contains functions or VIs for generating the right commands to communicate with an instrument.
On the Instrument Driver Network there is an instrument driver for the 4
385A:
https://zone.ni.com/idnet97.nsf/nidz/CB97C5E119AEEB9586256ABF004F59E4
This is a contirubted driver, not from NI or the manufacturer, and does not use VISA but uses GPIB VIs. The best way to determine the functionality of the driver is to open the VI in the llb that has an "_tree" suffix.
If you have a VISA based driver that is not in LabVIEW for the instrument you may be able to convert it for use in LabVIEW. For one thing you can call into any dll. If the driver is a CVI driver you can convert it for use in LabVIEW and reduce some of the burden involved with generating the VIs:
http://www.ni.com/support/cvi/visa/
Regards,
Kamran

ITunes 7.5 Won't Run - Says it is looking for Drive f:/

I have my Itunes on my external hard drive. Typically I have not had a problem downloading updates for Itunes onto my hard drive (drive g:/).
But for the past few updates, including 7.5, I can download the update, but when I go to run it, an error comes up saying "cannot find drive f:/". I don't have a drive f. I don't have my itunes set to download to any other drive but g:/. I need help b/c without the update, I can't use my ipod. (yes, I'm a victim to the new Ipod update which erases all material off your ipod).

Hi,
Thank you. Had to perform the following steps 'IN ORDER' to get 7.5 to work. Formerly was running iTunes 7.3.1 'without' incident.
1) Install iTunes 7.5. Quick Time 7.3 installs at same time. When error message occurs, click OK and finish installation.
2) Go to 'control panel' and remove 'Quick Time 7.3'
3) Install Quick Time '7.2.
4) Re-boot system and launch iTunes 7.5. How 'bout that. It works !!
Best Regards, DE

Looking for 1.5TB drive 12.5mm high for my caddy or internal bay

w520, have run out of room on my Hgst750. I have a caddy in the optical bay that will hold 12.5mm. Internal bay height the same?
Who makes a 1.5TB this height -- available now?
4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

Thanks for adding the results of your search. For some reason neither item was included in my own Amazon search or the Newegg list I generated.
As a guess both of these might have come out of enclosures purchased by an operation that takes out the drives for resale. ...especially the 2TB unit which when represented on Amazon as a loose drive shows that all the three sellers are not selling me anything ever designed for retail in any form: one says the only warranty is with them, the Amazon reseller. (and that price is $70 higher -- for the privilege?) I had been reading about the practice and its downside.
I am hoping to avoid this; perhaps a few more months, a year, will find the same slim units on the more open market and guaranteed by their respective manufacturers. For now I will pass, then, and do some more aggressive culling of content off into off-line cloud storage.
Again thanks for the further search results.
jonathan7007
4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

Can i partition an external drive that im using for time machine? its not an actual apple TM....

I'd like to partition my drive to make a separate place just for itunes music , is this possible? if so, how ?
thanks!

tamckellar wrote:
im just trying to make a separate area on the ex drive that i use for tm, to store just my itunes library .
Not a good idea...If that drive fails (and they All do at some point in time) you will lose both your TM and iTunes Backups.
Invest in another EHD for iTunes.
Moving iTunes > http://support.apple.com/kb/HT1751
Also...
Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

I want to upgrade my Hard Drive to 1TB and more. What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

What kind of hard drive do I need for my HP Pavilion dx6650us entertainment notebook PC?

I have a HP Pavilion dx6650us entertainment notebook PC that has the BSOD. Even when I run it in SafeMode I have absolutly NO desktop. I've tried EVERYTHING. I have lost hope. So im just going to buy a new hard drive. Does anybody have ANY idea what type of hard drive I need and aprox. how much it might cost? Please let me know(: Thank you.

It is a standard laptop 2.5 inch wide SATA hard drive like shown in this picture:
Look at Page 9 of this Manual:
Drive Manual
This will show how to replace it. Do you have the recovery disks that you could have made when the laptop was new? If not you are going to have to get a Windows disk or some HP recovery disks.
Here is a drive that would work for you.
160 gig 7200 rpm drive for $45
This drive will be faster than what you had and is a bit larger. A very good deal for the price. You perhaps already have a second hard drive in the system. See the manual on page 9 for the location of both hard drive bays. You could move the secondary drive (if there is one) over into the primary position without spending a nickel. In fact, that is a great idea. If you do that and still get the BSOD, then it might well be something else going on other than the hard drive. The hard drive is a likely issue but it could also be the memory and other things, too. However, I think the second drive is only found in the dx9000 models so do not be shocked if you do not have a secondary hard drive bay in your machine. I have never seen a dx6000 series but am pretty sure it is a lot like the dv6000 series of which I have seen more than my share. They have a lot of issues and I am concerned you will be spending money on a new hard drive that will not fix anything.
Feel free to post back with issues or questions.

10.5.8 to 10.6 Can I use an internal SATA drive in my MacPro for back up..

10.5.8 to 10.6 Can I use an INTERNAL SATA drive in my MacPro for back up..
or must I use an External hard dive.
I prefer to use an internal for anti "desk-clutter" purposes. I am looking
at a 2TB drive to install into my Mac Pro tower for the purpose of back up
and time machine i guess.
Also.. if doing a clean install of 10.6 how do i restore the backed up apps
without re-registering all of them?

A clone is a functional copy of the original, including the internal links & setting that makes it bootable if the original is. Time Machine will not make a clone of a volume, nor will a Finder copy. You can make a clone with the appropriate settings in the "Restore" tab of Disk Utility but many users find purpose-designed cloning utilities easier & simpler to use. The two most popular of these are SuperDuper! & Carbon Copy Cloner. Both are very reliable, easy to use, & well documented.
I prefer SuperDuper! for reasons that are not important here. However, even if you decide to use CCC, I suggest that you download SuperDuper! just to read the extensive documentation that comes with it.

Looking for driver for ven_1093&dev_c801 for xp sp3

Similar Messages

Maybe you are looking for