Looking for driver of Model CT4

i am looking for the driver for creatives sound blaster model CT4730.can anyone hlep me finding the driver for the card.

imtiaz wrote:
i am looking for the driver for creatives sound blaster model CT4730.can anyone hlep me finding the driver for the card.
Hi
Your card model can be indentified here
Search this forum using the CT4730 and driver as a criteria --> you'll find some links to download pages.
jutapa

Similar Messages

  • When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

    When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

    Try the following user tip:
    "Invalid drive X:\" install errors

  • I'm looking for driver of my hp laserjet 1006 for windows 7 ultimate

    i'm looking for driver of my hp laserjet 1006 for windows 7 ultimate

    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-54963-6&cc=us&dlc=en&lc=en&...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Looking for driver for WebCam V-UAE13

    i am looking for driver for WebCam V-UAE3. Please help!

    I took the time to look it up for you.
    http://forums.driverguide.com/showthread.php?p=8524
    Go to that link, inside is a link to the manufacturer's website with the driver AND another link where you can download the driver.
    Hope that helped.

  • I am looking for driver instrument for Agilent 35670A Analyzer.

    I am looking for driver instrument for Agilent 35670A Analyzer (for LabWindows/CVI). Where can I find it?

    Hello Kris1,
    We have a LabVIEW driver for the 35670A on our website, but not a CVI driver. There is, however, a CVI driver for a 3561A (another HP Dynamic Signal Analyzer). The command sets should be similar and so you should be able to modify the 3561A's driver to work with the 35670A.
    HP3561A Dynamic Signal Analyzer
    Otherwise, http://www.ni.com/devzone/idnet/other.htm states a few options to obtaining a driver. Drivers are developed based on demand and p
    opularity so the more requests, the greater the possibility that one will be developed. It would also be beneficial to notify the instrument manufacturer.
    Regards,
    Ray K
    NI Applications Engineer

  • Looking for stock 3D models

    Hi everyone:
    I don't know much about 3D models so I might be formulating my question incorrectly (for which I apologize). I'm looking for a wireframe (mesh) only 3D models (RPF or RLA files), and I was wondering if they are provided somewhere as basic/stock 3D files?
    Here's an example of what I'm looking for (as a 2D screenshot):
    http://www.ivansanchez.com/blog/sentinel/zetaplusa.jpg
    http://www.foro3d.com/tutoriales/blender/blender-art-magazine-3d/blender-art-magazine-11/N urbs-Cad_files/File_048.jpg
    I need it for some (semi transparent) effect of a 3D object rotating in the background that will be largely zoomed in so I'm not very picky what that object will be.
    Thank you in advance!

    Den,
    If you aren't picky on what it is, as it will be zoomed in quite far -- you can just make another composition of a wireframe globe, or anything with the find edges effect, with others, and then scale it up, make it 3d, render in master composition, and fly around it.
    Or proxy to it, render it out with camera in that composition and then drag the rendered footage into the master composition.
    This might save you some money on buying a model.

  • Looking for driver program

    I'm looking for a driver program of PCI-6602 counter-board for real-time OS
    VxWorks. If anybody knows a vendor of such driver program, let me know how
    to get it.
    Toyoji Fukui
    Tokyo Seimitsu Co., Ltd.

    I'd like to clarify some of the terms being used to hopefully help address your question.
    When communicating with an instrument there are a couple of "drivers". For the GPIB card that is used to connect to the instruments NI has NI-488.2:
    http://digital.ni.com/softlib.nsf/webcategories/85​256410006C055586256BBB002C101C?opendocument&node=1​32070_US
    VISA is also a driver and provides an abstraction for different busses. For example, you can use a VISA driver to communicate with an instrument via serial or GPIB with the same programming API.
    An instrument driver is a high level API that contains functions or VIs for generating the right commands to communicate with an instrument.
    On the Instrument Driver Network there is an instrument driver for the 4
    385A:
    https://zone.ni.com/idnet97.nsf/nidz/CB97C5E119AEE​B9586256ABF004F59E4
    This is a contirubted driver, not from NI or the manufacturer, and does not use VISA but uses GPIB VIs. The best way to determine the functionality of the driver is to open the VI in the llb that has an "_tree" suffix.
    If you have a VISA based driver that is not in LabVIEW for the instrument you may be able to convert it for use in LabVIEW. For one thing you can call into any dll. If the driver is a CVI driver you can convert it for use in LabVIEW and reduce some of the burden involved with generating the VIs:
    http://www.ni.com/support/cvi/visa/
    Regards,
    Kamran

  • Looking for driv

    Im looking for drivers for my sound card. After installing vista it didnt work and i cant find the driver CD it came with. I tried searching for the vista drivers but i cant find any which worked. Then running windows update it detected and installed some drivers. In device manager it says Creative EMU0K. Ive tried everything to get the sound working but nothing. I did some research and found that the EMU0K is the chip and not the sound card. I cant run autoupdater as vista isnt supported. Please help? i need the drivers/creative apps for it.
    Thanks?

    You also tried the KX project driver for the Soundblaster? Here's the link for the website: http://kxproject.lugosoft.com/
    And you also tried to find Daniel_K's modified install disc for Soundblaster/Audigy series via google?
    You got a quite old install disc. You can also try to get a newer version of the install disc via this thread: http://forums.creative.com/creativel...hread.id=25677
    - Go to the mentioned thread and click on the link for the site where you can find install disc for your SB li've 5. digital.
    - Install via Windows XP Compatibiltiy mode if nothing works, since Creative Labs ceased to support all emu0k, soundblaster li've series, for Windows Vista, so no official driver are released by Creative Labs.
    Good luck!
    Message Edited by CTman on 04-27-2008 0:03 PM

  • Looking for chemical molecule modelling software

    I wasn't sure where to put this question!
    First of all, I am not the chemist (I am a network engineer), I'm just trying to find a solution for a research professor. So don't assume I am familar with any current software, etc. Please give me any info you can!
    Said professor is still using "Macmolecule Pro" on a Quadra 950 with System 7.
    I'm looking to convert his models into something modern that runs on OS X, or at the very worst OS 9 in emulation so I can get rid of the old 950 in his office and move him to a G4 or G5.
    Can anyone point me in any interesting directions?
    thanks for any help!
    Rob
    Powerbook G4 800    

    These might be of interest:
    http://www.versiontracker.com/dyn/moreinfo/macosx/17054
    http://www.versiontracker.com/dyn/moreinfo/macosx/27899
    http://www.versiontracker.com/dyn/moreinfo/macosx/23506
    http://www.versiontracker.com/dyn/moreinfo/macosx/16329

  • I am looking for a 3D model drawing software program

    I am using autocad mechanical desktop for my 3D models. I can not find any way to export the files and convert them for the loader. Perhaps I could use a different program for making my models. Can you suggest an inexpensive software program with parametric dimensioning which exports to .OBJ or something similar?
    Any suggestions would be appreciated.
    mick
    [email protected]

    you have a special loader for autocad format see
    http://www.j3d.org/utilities/loaders.html
    and
    http://www.ncsa.uiuc.edu/~srp/Java3D/portfolio/
    and if after this you still want to convert it to obj you have this plugin
    http://www.fpsols.com/obj_export_ac.html
    cyril

  • Looking for drive config suggestions

    I am going to reconfigure my Mac Pro to enable the use of all 4 tb of internal hard drive space. I currently use a software raid 10 array that seems unstable and I need more drive space anyway. I don't really need speed, just space and some redundancy.
    I am thinking of changing the 4 internal drives to a software raid 0 array and using a 3tb 4 bay external usb drive (raid o as well) for Time Machine. I will also periodically copy my iphoto & itunes library to an external drive for off site storage.
    I was looking into the highpoint 4320 and Raid 5 but I dont like the idea of being a possible victim of poor or slow driver coding when Snow Leopard arrives. I also understand people use one internal disk as a system disk and raid 0 the other 3 for content but I'd like to keep everything on one disk for simplicity.
    Just trying to keep things as simple as possible with 8 disks in play. I would appreciate any suggestions.

    PM is great for running more than 4 drives, and making better use of your PCI slots for controllers.
    Even the Sonnet E2P $79 is 2-channel PM card.
    Then buy an enclosure that supports PM.
    Strongly recommend investing in FirmTek 5PM, costs but quiet and easy way to handle 4 drives direct connect.
    Buy a 2TB WD Green $299.
    One 4-channel PM SATA controller can support up to 20 drives using 4 x 5-drive cases. That is 4-8TB per case and 15-30TB.
    One enclosure as backup A, one as B, and one as 4-10TB of raw live data.
    You can't go wrong with PCI SATA controller. There are a number of choices and options. AMUG and Barefeats have some ideas and reviews. Sonnet and FirmTek are easy for me to recommend and worked with both for 10 and 5 yrs respectfully.
    So you have one enclosure now to get you started and while not PM at least you have something. Always nice to include the make/model so I can look at it.... (or did I miss that somewhere?). Just don't want you using USB for anything other than casual single drive duty.

  • Looking for driver for intel GMA 3650

    colours of background images of websites are all mapped to white and as such are invisible.
    I guess the reason could be that the last event of the WIN 10 microsoft basic diplay adapter driver install was: Das Gerät "PCI\VEN_8086&DEV_0BE2&SUBSYS_40121297&REV_09\3&11583659&0&10" erfordert weitere Installationen.
    If it wants to install further driver stuff this can only be the driver for the INTEL intel GMA 3650 graphic accelerator chip,
    which is present on my motherboard.
    my OS Win 10 tech preview build 9926

    Hi HB9RUZ,
    If your Network connection is well and IE could open webpage correctly, you may find the proper driver on the Intel Website:
    http://www.intel.com/p/en_US/support/highlights/graphics/gma3600
    Please note: As this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
    Or if you would like to update the driver, you may take use of Device Manager:
    Update or Change a Device Driver
    Further, as Team Zigzag suggested, if you would like to upgrade to Windows 10 Build 10041, please check for your updates.
    For reference:
    Windows 10 Technical Preview Build 10041 now available
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Apple LaserWriter 16/600 PS with Win 7 (64bit): Looking for driver software

    Hello,
    can anybody tell me where to find the driver software for the Apple LaserWriter 16/600 PS connected to my Windows PC running Windows 7 (64Bit). With Win XP there was no problem at all, the printer got connected via plug and play, whereas with Win 7 I can't get it to work.
    If there is no original WIN7 compatible driver version available, is there any other printer driver that could be used instead.
    Any help is very much appreciated.
    Best regards
    Jochen (Heidelberg/Germany)

    I'm testing to install hylafax in my computer with Windows 7 another option.
    Installing a PS printer http://yourmacguy.wordpress.com/2009/12/19/print-from-win7-to-macosx/

  • Looking for Driver for HP 3500 Color Laserjet for Windows 7. Is there a Generic I can use?

    I've been checking HP for 18 months and can never locate a driver for this Printer. Does anyone have any suggestions?

    Hi,
    Unfortunately your product is not supported by Windows 7, and will not be supported in the future, as you may find by the document below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Apple Keyboard and Win 8: Cannot type numbers ! Looking for driver or workaround.

    I have just upgraded to Windows 8 on one of my Mac Minis. Alas, the Apple keyboard cannot be used to enter numbers in Windows 8 ! Is there a new driver out there that fixes this ? I have been unable to find one but I may have conducted a faulty search.

    You may have to wait for the "official" Boot Camp drivers to be released since it's not oficially supported by Mac yet.

Maybe you are looking for