Looking for Drivers of an old pc

plz help me 2 find drivers of desktop computer....
ThinkCentre
Machine type 8185
Model B1G S\N xxxxxx
35GB space
Thank u...
Edit by Moderator serialnumber should not be public even on old machine

Hi you can found the desired drivers for M50 this way....Matrix ThinkCentre looking for 8185
and voila Drivers and more....
Thinkcentre M50
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

Vista looking for drivers and BSODs

I bought a 3TB MyCloud device a few months ago. I cannot get it to work properly with my Windows Vista desktop and support refused to help. They remoted in and accessed the device without using their software and claimed it was a Windows problem, not theirs. When I connect the device directly to my Ubee Wireless Router/Switch, Windows Vista immediately sees it as new hardware and tries to find drivers for it. Of course WD does not provide these. In Device Manager, it shows up under Other Devices with a warning indicator because there are no drivers installed. I was able to copy files to the device, but when I try to access them from the device, my Windows Vista desktop gets a BSOD (this happened after the call to support). I've now disconnected the device from my network as the constant BSODs damaged my computer. The device works with my Windows 8.1 computer, but has problems with my Sony Blu-Ray player connected wirelessly to the network. I've posted about this in a different thread. Is there a way to get this working properly with Windows Vista?

Bennor wrote:
The BSOD that other thread talks about appears to be related to using one of the WD apps, my guess is the WD My Cloud Desktop app on their Windows PC. There is a known issue for some who use the WD My Cloud Desktop app where once that app is opened, some users experience Windows Explorer crashing. There is one or two other threads covering this very specific Windows Explorer crashing issue related to that WD My Cloud Desktop app that affects a few users. Generally one does not need to install "drivers" to access the WD My Cloud. One should be able to access the WD My Cloud on their local network via Windows Explorer (NOT Internet Explorer). It will show up in the "Network Neighborhood" or under "Network". If it is not showing up under Network then check the network settings on both the Vista PC, ensuring it has the same Network Name/Network Workgroup (typically "workgroup") that the WD My Cloud uses under "Settings -> Network -> Network Workgroup". The other recommended suggestion is to configure the WD My Cloud for a static IP. Either within the WD My Cloud administration UI or within one's router/gateway. Both the Vista PC and the WD My Cloud should be in the same IP address subnet (for example both should have an IP address in the 192.168.1.x range). If you have not done so read through the WD My Cloud User Manual in particular "Using Windows XP/Vista/Windows 7" under "Getting to the Public Share" for the general procedure of accessing the WD My Cloud shared folders with Windows Explorer on Windows Vista.You and I are worlds apart on this issue. Your solution doesn't relate to my problem. I did not have a problem getting to or seeing the device in Vista. There were two problems and I believe I've cured both of them, though I don't know how. Problem 1: Vista keeps asking for drivers. When I connected the device to my network, Vista would see the device and try to locate drivers as if it had found a new printer. It couldn't find any so I had to close the driver request windows without finding drivers. The device then would show up in Device Manager under Other Devices with a yellow exclamation mark indicating the drivers were not loaded correctly. After several BSODs (for a different issue), I ran SFC and CHKDSK on my computer. Neither program found a problem. Then when I tried to connect the device again, Vista started looking for drivers and I walked away from the computer for the evening. When I had come back, it said the drivers were loaded. In Device Manager, Vista shows a new device category named "Western Digital NAS" with two devices installed: My Cloud Network Media Server and My Cloud Network Storage. The driver problem is now solved but I don't know how. Problem 2: Files I had loaded onto the shares to learn how to use the device can be seen in Windows Explorer. That was never a problem. However, as soon as I clicked on a file, the screen would scramble and then BSOD. This only occurred with files loaded onto the MyCloud device. After some blue screens, I started up into Safe Mode with Networking. I was able to click on the files without crashing, though Media Player wouldn't play them or even start in Safe Mode. I then did a clean boot and it tested okay. As I added items in MSCONFIG, the problem would not recur. There was one item that prevented me from even setting MSCONFIG to do a normal startup, and that was Kaspersky Internet Security 2015. Not only that, but I couldn't start the software at all. I did a complete removal of Kaspersky and then reinstalled it. I no longer have any BSODs. Both issues, as mysterious as they were, have mysteriously been resolved. I have a DLNA issue, but that's in another post. I also have a new issue with the WD My Cloud desktop app but I don't need to use that and if I do, I'll start a new discussion.

HT3669 xerox 6110 printer looking for drivers to support

i am looking for printer drivers to support my mac and my xerox 6110 printer

I managed to solve this problem just today. First, I downloaded:
Xerox Printer Drivers v2.1.1 for OS X
...which did not work. Then I managed to download the specific driver for the Xerox Phaser 6110 for MacOS X 10.8. I did it through the printer's web utility interface, which sent me to the appropriate Xerox web page.
This driver worked fine on my 10.8.3 installs on both my iMac and McBook. There was a note on the Xerox page that this software was a "recent addition", so it must have just come out.
Andreas

HT1677 When I am searching and enter what I am looking for all of my old emails are popping up. Is there a reason for this and way to remove it?

While searching with safari when I am typing in what I am searching for all of my old emails pop in that are related to the subject. Is there a reason for this and or way to rid the search of this?

Sometimes you want to just to search something that specific. Like if I am searching "ebay" I want the address and site for ebay to appear not everyone of my previous emails reguarding Ebay or searches in regards to ebay and this is all that pops up.

Looking for drivers for an old PCI-FlexMotion card

I'm trying to use an old PCI-FlexMotion card (ASSY nr. 184979B-01) in my win XP PC. The motion software version 5.0 seems not to have a compatible driver because the OS did not found the PIC card. I did not find any addtional driver on NI-support side. Is there any chance to use the PIC card. That old is it not!
thanks.
A. Villa
Airbus Germany

Nop, it didn't work:
but: I have only MOTION 5.2. (no other older version in available in the NI-Support page) However, I tried with 5.2 copying the files as described in the readme text. The OS does not recognise the FlexMotion board.
Trying choosing the driver manually (PCI device propertiesà update driveràspecific locationà don’t search) in the NI motion controller driver list the Flexmotion board does not appear. I only see: PCI-encoder-4a, PCI Servo-XX, PCI-Step-XXX and some other PXI-7XXX devices. I’ve test some of them with no success.
Thank you.
A. Villa
Airbus Deutschland GmbH

I am looking for drivers of Thermo Oriel Monochromator Driver 20050

The 20050 Monocromator Driver may be controller by a
computer eqquiped with rs-232 or IEEE-488 interface.I want to control a stepper motor with the 20050 via GPIB using Labview.I only have a poor and very old
program in C Language provided by Oriel, but I need
a Labview driver.Where can I find it?
Thanks

Hi Zazpi,
Unfortunately, I was unable to locate a driver for your instrument at www.ni.com/idnet. I looked at their site (www.oriel.com) and noticed that they appear to develop their own drivers. Your best bet would be to contact them about obtaining a LabVIEW driver. Oinre thy make the instrument, they would b the best situated to develop the driver! I would also like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http://search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps!
Best Regards,
Aaron K.
Aplication Engineer
National Instruments

Install went fine. Looking for Transmit prefs in old powerbook to move

I purchased a new Macbook Pro with Leopard. Everything is going well with the exception of transmit. I could move the application but when I opened it to make sure all is well, it is missing my license and favorites/sites presaved.
I went back and looked in my old powerbook in home/library/preferences and do not see the transmit prefs to move over. Can anyone point me in the right direction to find that?
I'm guessing there is a new version of transmit for Leopard. Once I get the prefs I'll dl the new version.
I also missed the BBEdit application in the migration and need to go back to get that too. I managed the migration without the migration wizard.
Thanks for your help locating my Transmit prefs.

Thank you sooo much! I downloaded the newest version of transmit, hooked up the firewall cable to the old powerbook, nabbed that pref, found BBEdit folder in my applications, nabbed that for the new MBP and I'm now set.
I keep finding little things here and there I still need.
I appreciate your help very much! Thank you!

Looking for FCE Video Filter - "Old Movie"

I'm creating a movie where I would like to have the footage look "old"; where the film may be scratched or discolored, maybe even some dropped frames, etc...
I went through all of the video filters on FCE and didn't see anything that got me this effect. (unless I overlooked something or have to use Sepia + ?)
Any recommendations on how to accomplish this?
Thanks for the help!
Power Mac G4 Mac OS X (10.3.9)

It is in the QuickTime filters which you access via :-
File>Export Using QT Conversion>Options>Filter>Special Effects.
There you will find a number of effects including the old film look, which you can customise with hairs, scratches, dust and film fading.
Ian.

Palm Treo 700p Cannot install. Windows Vista looking for Drivers

Installed Palm software and synced on my Dell with no issues.
Went to install on 2nd PC with Windows Vista Home. Issues. Got new download for Vista 32 and downloaded off site.
Same error puts me in a circle. System finds new hardware. Looks to install driver. Can't find Drive on CD or Hardrive and so keeps in loop. Cannot finish 1st "sync" without driver so install does not complete.
Please advise:
Can I use the Palm device on two seperate PC's (One on NT running fine..now adding Vista Home).
How do I get the drive installed?
How do I be sure NOT to overwrite the data on the Palm when I sync the 1st time on the 2nd pc.
Thanks
Post relates to: Treo 700p (Verizon)

Hello jpmill2 and welcome to the Palm forums.
1. Please make sure that your Windows Vista account is a member of the Administrators group. I would also be sure to check that antivirus software is disabled during the install process.
2. You can use the Treo 700p with more than one computer. I sync my Treo with my office PC running Windows XP SP2 and my Vista Business SP1 machine at home. (And a Mac, just for good measure.)
3. The USB driver for the Treo 700p is obtained by installing Palm Desktop 4.2 (bundled on the Treo 700p software disc) or by installing Palm Desktop 6.2 by ACCESS for Windows [Vista]. You should install the software first, and then connect the Treo after the install is complete. If prompted to HotSync during the install, I aways Skip it.
4. If you Skip the HotSync during the Palm Desktop isntall, you can create a new HotSync ID on the computer with the same name as the HotSync ID on your Treo. Then set the conduits to Handheld overwrites Desktop and then sync.
Hope that helps,
Alan G
Post relates to: Treo 755p (Sprint)

Still looking for drivers for this device

Hi guys, I'm having some issues finding the device at hand:
ACPI\VEN_SMB&DEV_0001
I've got a Pavilion 17f100 nm, croatian market.
Also, i've noticed I have some dificulties when trying to connect via wireless or issues with my ping being tooooo high when playing online, may be because of the internet connection but I'm not so sure.
Thanks in advance, help always appreciated

Hi:
Download, unzip and manually install the driver I attached under Attachments below.
Go to the device manager and click on the device needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Attachments:
AMD VEN_ASD&DEV_0001.zip ‏62 KB

Looking for drivers for macb

Im wondering where i can find the mac programm for my zen 8 GB. im using mac ox 0.4.! there was nothing on the installation disk. could you please send me a link?
thanks in advance
pan323

Hi,
I'm sorry but there's no mac program for your unit nor the unit is going to work with your O/S. It is only compatible with Windows O/S.
Cheers.

Looking for drivers

Need Ethernet driver for HP Compaq computer CZC3420W5G
This question was solved.
View Solution.

OK... just what is that string of characters???? a serial#, product#, part#, model#???
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Im looking for drivers for mac pro g4 10.4

my ethernet network wont reconize how do i get network driver please help? power mac os x g4

Hey, Admiral!
I had to make the leap to Intel Macs because my kids had to get MacBooks for school, and I was just too far behind the curve. It made me sad because I felt like the stuff i knew the best (Biege G3 era) was junk. But participating in the Mac Pro discussions is helping me understand more of the issues currently plaguing users here. I can leverage some of the older stuff.
There were some wacky side-effects of AppleTalk in OS 9. I have been running AppleTalk-over-Ethernet since those days. I still have a 10.4 Mac on my home Network acting as an AppleTalk-over-Ethernet Print Server for some older AppleTalk Printers, and a converter to AppleTalk/LocalTalk.
Even in 10.4, there are still a lot of pitfalls in the configuration:
If you get 0.0.0.0 as your IP Address, you are not close yet.
If you get 169.254.xxx.yyy, that tells you that you are getting close, but no one will talk to you yet.
If you get a numeric address not in that range, that is likely a manual setup where one is not appropriate.
If you get something in the 10.10.xxx.yyy, 168.192.xxx.yyy or 172.16.xxx.yyy, you are getting very close.

Looking for driv

Im looking for drivers for my sound card. After installing vista it didnt work and i cant find the driver CD it came with. I tried searching for the vista drivers but i cant find any which worked. Then running windows update it detected and installed some drivers. In device manager it says Creative EMU0K. Ive tried everything to get the sound working but nothing. I did some research and found that the EMU0K is the chip and not the sound card. I cant run autoupdater as vista isnt supported. Please help? i need the drivers/creative apps for it.
Thanks?

You also tried the KX project driver for the Soundblaster? Here's the link for the website: http://kxproject.lugosoft.com/
And you also tried to find Daniel_K's modified install disc for Soundblaster/Audigy series via google?
You got a quite old install disc. You can also try to get a newer version of the install disc via this thread: http://forums.creative.com/creativel...hread.id=25677
- Go to the mentioned thread and click on the link for the site where you can find install disc for your SB li've 5. digital.
- Install via Windows XP Compatibiltiy mode if nothing works, since Creative Labs ceased to support all emu0k, soundblaster li've series, for Windows Vista, so no official driver are released by Creative Labs.
Good luck!
Message Edited by CTman on 04-27-2008 0:03 PM

Just getting started with the mini. Wheres a god place to go for drivers. Had windows up to now.

Looking for drivers for hardware ,some of it a few years old. In particular an MSI starcam371i camera. Can anyone help this newbe?.

Macs are about as "plug and play" as any computer can get when it comes to USB devices.
There IS one exception to that, and it's..... Webcams.
I did about three months research before getting my Logitech C920. That's because out of about 80 different webcams Logitech makes, there are TWO (2) that I read were compatible with Mac OS above 10.5 The C615 and the one I got.
I used to have their basic $25 cam that came with headest and mic (Chatcam, they used to call it), and it worked with Snow Leopard, and Windows 7, but I had a eMac with a G4 and it wouldn't even recognize it in the USB bus. I found MaCam, a hack, that let me get it to work, but it was painfully slow to respond and the vidoe quality was terrible. MaCam doesn't work with Intel Macs though.
You may find the same issues with preformance from your older cam on your new Mac. It may just be time to look at a new one.

Looking for Drivers of an old pc

Similar Messages

Maybe you are looking for