Looking for FCE Video Filter - "Old Movie"

I'm creating a movie where I would like to have the footage look "old"; where the film may be scratched or discolored, maybe even some dropped frames, etc...
I went through all of the video filters on FCE and didn't see anything that got me this effect. (unless I overlooked something or have to use Sepia + ?)
Any recommendations on how to accomplish this?
Thanks for the help!
Power Mac G4   Mac OS X (10.3.9)  

It is in the QuickTime filters which you access via :-
File>Export Using QT Conversion>Options>Filter>Special Effects.
There you will find a number of effects including the old film look, which you can customise with hairs, scratches, dust and film fading.
Ian.

Similar Messages

  • Looking for easy videos to teach someone OS X

    My uncle just got his first computer and I am looking for something to teach him all about his new Mac. Im thinking something like the video professor you see on tv only for Tiger.
    I have seen the videos on Apples site but they are all for the ilife suite which is nice but I am looking for something with videos on the little things like how to get on the internet, how to write an email, how to move files, etc... The only other site I have found is the Atomic Learning site but there is alot of things there he will never need like automator and voiceover, etc...
    I am also only looking for free videos not paid services or purchases. Thanks all!

    EDIT: This reply should have been to tbharber.
    There are some free video Tiger tutorials.
    Also, Apple has some topics/tutorials on their Mac 101 site and Switch 101 with some QT videos.
    Hope these help.
    -mj
    [email protected]

  • I had a friend airdrop a video to me last week from her iPhone and I saw it on my iPhone after the upload was complete. I'm looking for the video now and can't find it anywhere on my phone. Where is it and/or is it stored on my phone?

    I had a friend airdrop a video to me last week from her iPhone and I saw it on my iPhone after the upload was complete. I'm looking for the video now and can't find it anywhere on my phone. Where is it and/or is it stored on my phone?

    I airdropped the video again and it now shows up in my camera roll.

  • Looking for Simple Video & Audio Player

    Hello,
    I am very new to Flash so any help would be greately appreciated.  I am looking to add video and audio clips to my movie.  I want the player to be a part of the movie and not just embedded in a web page.  Is there a place where I can:
    1. Download free players to be used within the movie
    2. Get some detailed instructions on how to accomplish it.
    Thanks for any help.
    Craig

    flash packages a fully functioning player with a variety of skins (and you can customize the skins and make your own) in the components panel called an flvplayback component.

  • Looking for ibook video camera

    I am looking for one that offers the following.
    1) Is priced under $400
    2) Has a light
    3) Can plug into my VCR so I can make duplicates or send people my tapes.
    4) Uses digital tapes
    5) Can plug into my ibook G4 via Firewire or USB 2.x
    6) Has a color viewfinder (most seem to have a black and white viewfinder).
    Thanks,
    John

    I have an old PowerPC dual G5 running 10.4.11 and I'm working on some HD projects at the moment, so it certainly can be done on your machine. Upgrading/extending your RAM might be a good idea though; is that possible on your machine?
    If you go HD with the HF-S100, you'll need to be thinking about hard drive space; you'll need a lot of it; it's gonna add up quick. To use content from that camera (which is AVCHD format), you'll be converting it to Apple Intermediate Codec (AIC) to use in FCE (iMovie will be doing the same thing internally, if you use that), and the file sizes are large. I've got a 12 second clip here on my desktop from an HF100 converted to AIC that's 169MB. So do the math... If you're doing a lot of filming you'll need to have a plan for backing up and archiving...offline storage perhaps.
    But otherwise I think you've got a machine that will be OK, although I wonder if you have enough RAM....

  • Looking for a 'step filter' plugin...

    Essentially I'm looking for a step based filter plugin that works in a similar way to Delay Designer, whereby you can define the cutoff/resonance/pan etc within a grid, thus giving complete control over where, when and for how long parts are filtered.
    This would be a pretty cool plug I think and I've looked before but not found anything. I like the simplicity of Delay Designer too so I don't want to get lost in features I don't need. Does anyone know of such a thing? I have Reaktor if anyone knows any user files, but I always find it a bit complex and painful. Otherwise I'm prepared to pay for something if it's decent.
    Cheers

    This has a 128 step sequencer for filtering and panning:
    http://www.camelaudio.com/camelspace.php
    Also the Ensemble "Vierring" in your Reaktor factory Library has fantastic filtering features as each of the 4 filter bands can be linked to it's own step sequencer plus many FX options.
    Message was edited by: Sampleconstruct

  • Looking for background videos

    Hello all
    I'm on the hunt for various background videos, I have found IStockPhoto and Getty Images, but I was wondering what other options I may have and, was hoping for a few recommendations, I'm not really looking for anything specific cause it really all depends on what project I'm working on at the time....
    Thanks

    Is joke, yes?
    Anyone know where I can find a red and white swirling, falling into the vortex,
    There are several presets and prebuilts within Motion and LiveType.
    kinda cartoony looking type
    You mean text? Can't imagine text doing what you're describing without many carefully applied filters. Since the text is customized by the user, no.
    background to key?
    You mean key in front of? Or you want to key out the background? Huge difference and we cannot possibly read your mind.
    bogiesan
    Message was edited by: David Bogie Chq-1

  • Looking for simple waveform filter

    I am using E series board using single ended input to collect 16 channels of constant value data, (ie 10volts). The data has a small amount of noise and outlying data points which I need to remove. I am attempting to implement a simple low pass filter. I attempted the Buterworth and FIR filters. The code I have attempted based upon the help examples unbundles the waveforms, filters the data, and rebundles the waveforms. This produces a discontinuous waveform when ploted. Addtionally the filtered data looks like a sine wave with an amplitude ranging between zero and the bias of the constant input data dependent upon the input parameters fo the filter. I'm looking for an example code that filters a constant signal with outlying da
    ta points and small amount of noise. I cannnot use a average because the outlers are all on one side of the average value and will bias my data.
    Thanks for the assistnance
    Brian Wells
    Space Research Institute
    Auburn University, AL

    Brian,
    Can you try a running average using shift registers? With this, if the latest point is over x% outside of the running average, then do not include it. Since your signal is "constant," then frequency filters will probably not help you. See the attached example in LabVIEW 6.0.2. The interesting part of this example is that you need to know what your expected value is. If this is unknown, then one must do a bit of statistics (probably through histogramming) to get an initial average value.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask
    Attachments:
    Remove_Outliers.vi ‏62 KB

  • Looking for a video transfer compressor for new nano

    We just bought an 3rd generation 4G nano for daughter. We woud like to be able to load videos (DVD's) onto her i-pod. What do you recommend for a program to do this. I am looking for a download type program. Any suggestions? Thanks! Kelly Duhrkopf

    You only need one bit of software, Handbrake.... it's all you need
    Kelly Duhrkopf wrote:
    We just bought an 3rd generation 4G nano for daughter. We woud like to be able to load videos (DVD's) onto her i-pod. What do you recommend for a program to do this. I am looking for a download type program. Any suggestions? Thanks! Kelly Duhrkopf

  • Looking for Schnappi video clip

    Hey all,
    Looking for the Schnappi or Ein Llama video clip for my son....
    Can't seem to find it anywhere!
    Any help would be greatly appreciated
      Windows XP  

    Thanx Dave for verifying - I always have been to lazy to install the WMP on my Macs.
    -kay
    btw. there is a 30 sec QT file at http://www.video-c.co.uk/videovaultwatch.asp?vidref=schn003
    Be careful! Watching this clip -imho- might cause a severe brain damage

  • Looking for Drivers of an old pc

    plz help me 2 find drivers of desktop computer....
    ThinkCentre
    Machine type 8185
    Model B1G S\N xxxxxx
    35GB space
    Thank u...
    Edit by Moderator serialnumber should not be public even on old machine

    Hi you can found the desired drivers for M50 this way....Matrix ThinkCentre looking for 8185
     and voila Drivers and more....
    Thinkcentre M50
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • I'm looking for a video of a good, comprehensive demonstration of what Motion 5 can do.

    All I can find so far are tutorials... any suggestions?

    I don't know of anything like that. What have you not been able to figure out from the Apple web page for Motion?  It looks like you are using Final Cut Pro X, all of the titles, generators, transitions, templates are created in Motion. Companies like Ripple Training and MotionVFX create plug-in tools or templates that are built in Motion, so those are good places to see the capabilites in action.  I know these are brief, but here are some overviews by training companies that discuss what Motion can do:
    http://www.lynda.com/Motion-5-tutorials/Essential-Training/82541-2.html
    http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide
    http://www.rippletraining.com/categories/apple-pro-apps-tutorials/motion-5-tutor ials/getting-started-in-motion-5.html
    Other than that, maybe you can explain what projects you might want to use Motion for or what capabilites you are looking for?

  • Looking for an effect/filter

    Hi,
    I'm looking for an tutorial or effect like the one in the link below. Don't know under what I should search for.
    http://youtu.be/HAbq_qkzFR0
    Thanks

    The effect is Echo. It takes a bit of getting used to and footage with an alpha channel seems to work better most of the time.

  • HT1677 When I am searching and enter what I am looking for all of my old emails are popping up. Is there a reason for this and way to remove it?

    While searching with safari when I am typing in what I am searching for all of my old emails pop in that are related to the subject. Is there a reason for this and or way to rid the search of this?

    Sometimes you want to just to search something that specific. Like if I am searching "ebay" I want the address and site for ebay to appear not everyone of my previous emails reguarding Ebay or searches in regards to ebay and this is all that pops up.

  • Install went fine. Looking for Transmit prefs in old powerbook to move

    I purchased a new Macbook Pro with Leopard. Everything is going well with the exception of transmit. I could move the application but when I opened it to make sure all is well, it is missing my license and favorites/sites presaved.
    I went back and looked in my old powerbook in home/library/preferences and do not see the transmit prefs to move over. Can anyone point me in the right direction to find that?
    I'm guessing there is a new version of transmit for Leopard. Once I get the prefs I'll dl the new version.
    I also missed the BBEdit application in the migration and need to go back to get that too. I managed the migration without the migration wizard.
    Thanks for your help locating my Transmit prefs.

    Thank you sooo much! I downloaded the newest version of transmit, hooked up the firewall cable to the old powerbook, nabbed that pref, found BBEdit folder in my applications, nabbed that for the new MBP and I'm now set.
    I keep finding little things here and there I still need.
    I appreciate your help very much! Thank you!

Maybe you are looking for

  • RAM preview audio will not play through bluetooth headphones

    I am using bluetooth headphones (Jaybird Freedom Sprint) to try and edit audio/video in after effects. However, when I go to Preferences>Audio Output Mapping and choose "Freedom Sprint" and click OK, close the preference window, and it will automatic

  • Acrobat Pro 9.0 printing to Canon ImageRunner 3220 prints only first page of multi-page documents?

    We just got the new CS4 and with the Acrobat Pro 9.0 install, we cannot seem to print multi-page documents.  Only the first page comes through, and the queue clears as though the document's been fully printed. We are running Windows XP Pro SP3, and t

  • Generating "XSD" from an "XML" file

    Hi, I want a java program through which we can generate an "XSD" for the given "XML" file. I don't want any ready to use tools or ide's. Please send me links or code if exists. Thank You.

  • Save Xml rows in table

    I am having Stored procedure where i am inserting category and subcategory from xml rows. I already have three tables i.e category,subcategory and combination of both i.e  catsubcatCombination. I would like to insert records in catsubcatCombination w

  • File to File scenario help

    Hi    I am doing a File -File scenario, In which I want the file to be sent to multiple targets(means multiple folders as I am  using the TP as  NFS). How can I acheive this? What are the additional configs in ID which I need to do further? Thanks Su