Looking for fellow Electronica Synth artists

I am using GB3 to compose electronice synth pop and I was wondering if there was anyone out there with similiar taste. I find the software really easy to use and I can crank out tune after tune.
I layer a few synth melodies and baseline, pick a dance beat and then cover it up with a melodic story using various synths that Im getting used to.
I would like to hear your music so we can learn from eachother.
PEACE.

Ive had a hard time defining my type. I wish you could hear it. Ok I have some badly mastered tracks over at
www.soundclick.com/drasticdragonfly
I've stopped uploading to there for now as I have slow interenet and I have to take down a few from there too.
I've remastered most of those songs and added a bit more weight to each of them because I'm learing as I go. I'm in the process of finding a place to display my tunes and I think I'm going to get some reveiws done on them at Garageband.
I would say most are easy listening but not yet ambient because I do use dance beats ranging from 100 -130 bpm range.
They dont really follow much of a pattern except each one usually has a non-short looped melody that plays for a bit before repeating or even one that is the whole song.
Most people who have heard them think chillout because they are all instrumentals and someone relaxing/intriguing. They can get be a bit simple and easily overplayed but I have lots more to come in my head, im sure.
I'll check out those loops and synth sounds, thanks

Similar Messages

Are you looking for BIG Rhythmic Synth lines?

For those of you into Trance/Techno. Here is an excellent tip that a lot of you will know but for those that don't.....
1) Choose a Nice PAD sound from the EXS24 library on Audio Instrument Track 1. For this example choose Analog Pads>Matrix12Strings.
2) Set up a loop for 4 bars.
3) Put in a distinct Rhythmic Apple loop on Audio Track 1, filling the 4 bar loop (For this I suggest a 'Cowbell Groove 01' from the Garage Band Loop Library for easy results).
4) MUTE the chosen Loop in either the Environment OR the Audio Mixer - Do not MUTE the Arrange.
5) Insert a 'Noise Gate' into the EXS24 Track.
6) Set Attack to 2 ms, Hold to 100ms, Release to 80 ms, Then Slide the Threshold up to 20dB. Lookahead 0ms, Hysteresis -3dB. High Cut 20000Hz. Low Cut 20Hz. Select SideChain>Track 1 at the top of the Noise Gate menu.
7) Insert a Stereo Delay or Send it to a bus. Use the 'Double Pan Delay' preset for the sake of this demo.
Now Play your EXS24 Pad Track and chill out at 90 bpm or get the bangin' choons at 130bpm. Loads of Fun - Now you know why Oakenfold/Sasha/Transeau sounded so good in the 90's......
Cheers

good to see people discovering good ol tricks of the trade for themselves..
here's another one, good for dance music of many genres:
use a compressor with sidechain. key the sidechain to the kick drum, or to some other significant, strong rhythmic element like a loop or percussion part. put this compressor on a pad sound and play with threshold levels, attack and release till you get a nice pumping effect on the sound that works rhythmically.
also, don't just limit yourself to using this on simple pad sounds.. make an effects bus with a nice chain of flangey/phasey/long delay stuff on it, and send a whole bunch of tracks to it, as you would normally.. then, try a limiter or compressor on it, sidechained as described above. now you start getting that expensive, "how do they make it all sound so rich and full, yet punchy and rhythmic" sound.. very good especially in rich, fat, washy deep and progressive house styles, but also works a treat on more electronic styles like trance and the very plastic electro house stuff coming out these days too.
basically, the key (pardon the pun) is to find clever uses of sidechained effects, because it makes the elements of your mix interact organically and responsively, and just plain sound expensive and classy.

CLAD with MS in Electronics/Electrical engg looking for better opportunities

Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf ‏130 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

Looking for a graphic artist for IPhone artwork

I'm looking for a graphic artist to draw some graphics for a puzzle game for the IPhone, If you are interested, I would offer payment and possibly a share in the revenue.
Send me a message if you are interested.
Chris

Hi, Chris.
This is interesting. Kind of a yin yang thing. I am graphic artist / UI designer who's looking for a developer. Are you a developer with access to the app store currently, as that seems to be an issue. Take a look at my site... http://www.raygunstudio.com (also check it on your iPhone) ... and you an answer me from there.
-thanks, michael

Looking for a way to search artists in Apple TV from iTunes Match?

Looking for a way to search artists in Apple TV from iTunes Match similar to searching for a movie in Netflix.

I'm not sure I understand. You access iTunes Match via the music section, there are different categories and you select artist to search through the artists in your music library.

Looking for a specific 8-bit synth plugin

There was one I found a while ago (maybe a year or so) that had a lot of Nintendo-type preset sounds. At the time, it wasn't Leopard compatible so I didn't keep it on my system. I've done some searching and checked out a couple plugins since including Magical 8-bit plugin and Chip32, but none have had the wealth of presets that first one did. I know I can recreate any of the sounds I want using those or Logic's own plugs, but I have a small project with a tight turnaround and haven't really worked with this kind of stuff before. Anyone have any idea which plugin I'm looking for? I know my description doesn't give you a whole lot, but if you know any such plugins that had more specific presets than just "square," "triangle," etc. I'd love to check them out. Thanks.

Thanks for both those suggestions. I believe the one I'm thinking of was freeware, but those two do look pretty solid.

Hi from ANTIQCOOL looking for podcasts to play us

Hi this is my first post here....hope to call back from time time and get to know a few people...my name is pete I play guitar in a band called ANTIQCOOL.
We are currently recording our first CD and looking for info on getting some internet radio airplay or getting on a few podcasts.....all our tracks are podsafe. follow the links if you want to listen
Pete ANTIQCOOL
http://music.podshow.com/music/listeners/searchResults.php?SearchString=ANTIQCOO L
http://www.garageband.com/artist/antiqcool
http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendID=167497 079
Back to top
Windows XP

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
There doesn't appear to have been any reported problems with the store yesterday, if you say what the problems are that you are having then somebody on here might be able to try and help.

Looking for a cool music app (music creation, recording, playing)

Hi there,
I was looking on the app store if there's such application but didn't succeeded at the moment.
I'm looking for an app that would allow me to create music on the fly with a "midi-keyboard" with which I would record some notes then loop the sample and record a second track.
And build my simple music by playing bass line, then adding some beat, etc...
Any idea if it exist?
thanks in advance

Please be aware that you are not communicating with Apple when you post in these forums. Most of the people who will reply to your posts are, like me, your fellow users.
As to your issue, first, make sure that you did not inadvertently make an in-app purchase. Many apps, particularly games, are free for the base game but charge for additional features such as levels, "coins" and other such add-ons. Check your Purchase History to see if that reminds you as to what you might have purchased:
http://support.apple.com/kb/HT2727
If you find that this was an in-app purchase, to prevent this from happening again, turn off "In App purchases" in the Restrictions settings on your device. For more information, see:
http://support.apple.com/kb/HT4213
As to a refund, that's not automatic since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
They're usually pretty lenient in the case of inadvertent purchases, but there are no guarantees.
If the charge was not an in-app purchase that you made and forgot but the charges do appear in your Purchase History, contact the iTunes Store and let them know. You should also immediately change your password for your Apple ID. If the charges don't appear in your Purchase History, they were probably fake charges made directly to your credit card, and your card issuer will need to handle those.
Regards.

Look for my invoice from July 2010, bought in Washington DC

I bought IPAD 1 , in Washington DC on July 2010,
I need to look for the invoice, I paid around 650 US$ .

You are not communicating with Apple when you post in these forums; we are all just fellow users. You will need to call the store from which you purchased the iPad and ask if they can provide a duplicate receipt. Whether they can provide a duplicate receipt three years after you made the purchase is doubtful, but you can ask.
Regards.

What to look for in a location for setting up an Extreme?

I have a router, cable modem, cell phone extender, and hub in a bedroom closet because that is the way it was setup when I moved into my house. It is messy and there are lots of messy cables. I want to move all of this into another part of my house. What do I need to look for when deciding a location for all of this gear? What technical requirements do I need to ensure that it will work? Do I just need power and an ethernet port on the wall? Anything else?
Thanks.

Why adequate ventillation?
To keep electronics running cooler, so they will last longer. If you are not concerned about component life, then you can ignore the advice about ventilation.
The gear is on one side of my house and I plan to add another Express device to use to extend the Wi-Fi signal. In this case, I'm assuming your sprinkler example does not matter?
Then why did you not tell us this originally? We could have saved you some time.
You told us that you planned to move all of the gear in the closet, and now you seem to be saying that is not the plan.
Locate the AirPort Express approximately half way between the AirPort Extreme and the general area that needs more wireless coverage.
Extending this way always results in compromises. The Express needs to be close to the AirPort Extreme to get a good strong signal, and yet it also needs to be close to the wireless devices to deliver a strong signal to the devices.
It cannot be located both near the Extreme and your devices at the same time, so the best "compromise" is about half way between the Extreme and the area where you need more wireless signal coverage. Avoid walls or ceilings in the signal path as much as possible.
Remember that the Express can only "extend" the quality and speed of signal that it receives. It cannot "boost" the speed of the connection, it can only make it go further.
A much better solution if possible would be to connect the AirPort Express to the AirPort Extreme using a wired Ethernet cable connection. Then, you can locate the Express exactly where it will be most needed, since there is no signal loss in a wire.

New iTunes search help!: I'd like to just start typing in the upper right search and have the list update like it did in older iTunes versions. Now it has little suggestions of WHAT IM NOT LOOKING FOR!

Remember the days when you were looking for that metallica song... you kind of knew the name... so you start typing it in the search, and that BIG WELL of music would whittle down with every character typed? the search covered titles, artists, genres, ANYTHING that was displaying. I know a lot of folks HATED this dynamic, but let's face it, it worked, and it worked WELL. And Apple's had us all get used to that dynamic for over a DECADE.
I get that times need to move foreward, but they went WAYYYYYYY too far with how the simple search box works now(upper right one) ... The columns of Title, Album, Artist, are still there, but they drastically change the layout and presentation with everything you search for... and newsflash, NOT EVERY SONG BELONGS TO A GENRE OR ALBUM OR ARTIST....
I'm the kind of guy that doesnt allow itunes to attempt to copy eveything into hundreds of folders. I already have it all pretty well organized...Lots of my music are soundbytes that I just had in the main widow of iTunes. Sure they'd be buried in the thousands of other songs, but with a click of a key I could get to it... now iTunes ONLY seems to try searching things that are in albums, genres, labeled so specifically that I would have to take a month off JUST to start catalogging my music the way iTunes wants... Even THEN only showing me a small number of choices in the search bar .... like "Do you want these 4 songs you DIDNT search in the invisible queue next?" "Did you mean all this other sh*t that you DIDNT search for?" **** I used to be able to find almost ANY song with like 3 keystrokes. if I type in "Zelda" ... (looking for that obscure live Zelda acoustic I recorded with my phone that I dont have the band name to) It suggests EVERYTHING else BUT that song... whereas before it would just list the 20 or so ANYTHINGS I have loaded into itunes with that string of letters in it.
Anyone else seem to have this issue? Is the OLD easy to search buried in the furthest preference trenches to TRY to weed out old dogs such as myself, who were able to master the crappy UI iTunes has neglected to give a **** about in the past?

Please try the action I supplied in my post.
If you untick the search Entire library
Then type in your search term it will give the list of songs in the main window

Looking for a Great Flex/Flash Engineer

Hi All,
Apologies if this isn't an appropriate place for posting such a request, but I'm a long-time user of Adobe Flash and Flex. Despite the uncertainty surrounding the future of Flash and Flex we feel it's still the best platform for delivering rich Internet applications. We're on the hunt for a couple great engineers to join our team, and we're thinking some of you might be on the looking for positions that allow you to leverage your Flash and Flex development talents.
Information about the UI position is included below. Please check out http://coincident.com for more information about us and to see our other posting(s).
Thanks!
-jmh
President & Founder
Coincident, Inc.
User Interface Engineer
Coincident. We’d like to make it a household name but we’re going to need your help! We’re a small clean energy company in Boston, Massachusetts and we’re developing an automated energy management platform for residential and small commercial energy consumers.
We think it’s a potential game-changer amongst a sea of competing interests and apparently so does the U.S. Department of Energy. They’ve backed our engineering efforts with innovation research grants to help us commercialize our technology.
We’re on the hunt for a talented programmer with the ability to fuse design and technology like no other. You’ll help craft the user interface components that make our energy management system the most attractive and easy-to-use on the market. Ease-of-use, visual appeal, and intuitive behavior will be your raison d’être. Bring a passion for energy efficiency, rich internet applications, consumer electronics, and mobile development platforms.
This is a paid full-time position offering compensation and equity options commensurate with your experience and ability to make significant contributions to the development of our product.
If this sounds like a job you’d love, keep reading to see what we’re looking for.
Does this sound like you?
Talent for developing dynamic and rich Internet applications
Experience with Adobe Flash, Flex, HTML 5, and JavaScript
Versed in UI development best-practices and supporting technology frameworks
Knack for implementing elegant user interface controls and components
Unparalleled ability to anticipate user behavior and response to designs
Ability to work and collaborate effectively with creative and technical teams
Experience integrating web services and Java server-side technologies
Aptitude for mastering new technologies in short periods of time
Ability to work autonomously on new product features with minimal instruction
Proficiency with vector and bitmap graphics libraries, applications, and tools
Extra credit for mobile development skills for iOS and Android platforms
Coincident is located near South Station in Boston’s Innovation District and is a member company of Greentown Labs, Boston’s first and only clean technology incubator. Resumes and cover letters should be addressed to [email protected].
United States Citizens and Residents only, please.

Another option: I bought a nice one at REI for PWB in March, and now use it for MBP. Has space for my wacom tabet and also small 3x5 or so firewire HD, and of course power adapter and misc stuff. notebook compartment can be removed and carried separately. Very happy with it.
George

I am looking for direction on beginning a project.

Hello all, this is is a brief and likely frustratingly generic message.
It has been well over a decade since I have worked with Adobe products (I last built a web page with PS 5 and Macromedia Dreamweaver).
All of the new tools available to us are astounding but, for someone partially familiar with the tools but unfamiliar with the new workflows, the Creative Cloud can be daunting: there is simply so much.
I have two projects I would like to work on, the first is a blog that will incorporate videos of recorded shows, and host essays and writing on creative criticism, the second is a web page for a tutoring and academic writing service.
What I am looking for isn't a hand to hold while I do all of this, but a bit more specific a vector for where to begin my learning. I am used to the old method of designing, slicing, and fighting with pixels and tables, and having to manually set styles on static portions of web pages; CSS is a new ball game for me, as it was only in its infancy when I was doing this years ago.
Should I be using Dreamweaver, or Edge Reflow these days, if I am more of a designer/writer than an artist? What about Muse; though I find that Muse doesn't render graphics very well and content becomes blurry (like blurred 1px lines rather than crisp images like in PS)? I'd like to be able to repackage my blog in a mobile app one day, likewise for the tutoring service, but that one much farther down the road.
So, I guess, I've put on my blindfold, and am ready to pin the tail on the donkey, but I need someone to give me a spin first. I know there isn't much detail in this post, but I don't want to start rambling about things that don't really matter yet; but I do have the projects outlined and ready for green lights, so I can fill in more details as required.
Best,
Jared.

I only use Appleworks 6 to create documents. The printer is Photosmart 3200 all-in-one

Looking for a Labview job. Any offers or suggestions?

Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.

Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request.

Looking for a music app that doesn't stop playing music when album over

Back in the 90s, I had a 5 disc CD player. When one album was done, it would move to the next album.
With iTunes, one album was done, the next album would start playing.
With iPhone, one abum is done, music stops playing.
I don't understand the logic behind the iPhone music app. This is especially bad for when I'm driving.
I'm looking for a type of Music app that either:
1) Allows me to swipe to next/previous album as well as next/previous track. (maybe a swipe up/down command)?
or
2) Allows me to display all songs, but sorted by Artist or album (that way I automatically have one long
or
3) Will automatically advance to the next album when the current one is done.

Bob, I have the guide, just didn't think of the playlist angle. I was looking for the genre/Siri thing. But hey, making a playlist worked.
Demo, yes Siri works now that I've made a playlist and say "playlist" And I'm satisfied with the fix.
But you'd think apple could make playing music more convenient. I took off all my music and retagged it, leaving all info blank (ie: albums and artists etc) and leaving only genre because it's so difficult to get it play a genre. I'd pick a genre, start with a song and it would play only songs from a single album. I've read of some odd fixes for this and a couple of them worked...sometimes! (If you stand on one leg and whistle Dixie kind of things) Ridiculous!
By eliminating all tag info except genre I fixed that issue and can now play by genre.
But as of now Siri still won't play Gospel music by my asking, she still replaces my spoken "Gospel" with her "Christian & Gospel" which like I said doesn't exist. And correcting Siri doesn't work. All my music falls into 3 genres, 2 of them Siri handles perfectly, Gospel she messes up.
Bottom line - I shouldn't have had to make a playlist, or played with the tagging of my music. Apple says you can play your music by genre, and it should be simple to do so.

Looking for fellow Electronica Synth artists

Similar Messages

Maybe you are looking for