Looking for female to male auxiliary cable

I have a 2008 jetta se with the ipod dock built in but the rattles around and causes skipps. Is there a female 30pin ipod connecter to male auxiliary cable that i could hook up and still use the ipod.

Amazon has several, and they're quite cheap.  I've never used or needed one myself, so I can't comment on quality.
http://www.amazon.co.uk/s/?ie=UTF8&keywords=extension+cable+ipod&tag=googhydr-21 &index=aps&hvadid=11253456830&ref=pd_sl_23xovp8il3_b

Similar Messages

  • Looking for a new recharge/USB cable for my Ipod classic 5th gen

    Lost my cable, cant access/edit my library or recharge my Ipod. If anyone knows where I can get one please let me know... getting a little desperate.

    Just search up 30 pin cabLe on Google. Here is one website.
    https://www.macfixit.com.au/4-inch-slimfit-usb-sync-cable-for-all-30-pin-ipad-ip hone-and-ipod-white.html?gclid=CNfE-uDercMCFdd6vQodNy4AUQ

  • Apple dock connector female to male cable...do they make these?

    i'm looking to run a female dock connector from my dock, to a male dock connector on the other end to my phone for use in my car, so i can get charge and line out to my phone and hide all the connectors except for the final male connector to my phone.
    like this:
    dock>>>female connector....(cable)...male connector>iphone
    hope this is clear.
    does anyone make one of these?
    thanks
    carl

    sik doesn't have one...i use the sik imp and that's what i need it for.
    as for this response:
    "you can convert a usb cable back and forth... make your usb cable where you make the switch"
    i have absolutely no idea what you are talking about but thanks for the response.

  • Looking for specific cable

    I just looked in the store and Apple doesn't seem to sell this, but I am looking for a female/male connector cable. Essentially, I need a cable that replicates an iPhone dock at one end (male) and then plugs into the dock with the female end so I can tether my iphone to my dock. The reason is I can't fit the phone in the dock with the protective cover and it's a pain to remove every morning, as well as the fact that it eventually stretches the plastic cover out taking it off and on repetitively.
    If you've seen one of these somewhere, please let me know.
    Thanks

    EllsbirdAgain,
    There is two ends, one that goes into the dock, one that goes into your computer. The end currently connected to your dock is a dock connector. The other end is a USB connector that goes into your computer.
    The one that goes into the dock can also connect directly to your iPhone.
    Essentially I am recommending bypassing the dock if your case gets in the way of using the dock.
    This is page on the Apple Store online shows what both ends look like:
    http://store.apple.com/us/product/MA591G/A (Note: That is the replacement cable for what came with your iPhone)
    Hope this helps,
    Nathan C.

  • Male 30 pin to female 30 pin extension cable

    Does anyone know who makes a male 30 pin to female 30 pin extension cable or converter. Can't find one online and the reps at the Apple store were not helpful. I can't attach any accessories that need to be flush with the 60g IPod (such as the FM Transmitter, docking station) without taking it out of the case which increases the chance of scatching it.
    Thx

    If you just want something to lift the iPad a little and make it charge with other older style firewire based chargers, maybe you want this -> Scosche passPORT Charging Adapter for iPhone 3G
    A quick Google search shows results for the male to female 30-pin extension you described.

  • Looking for replacement DIN cable for FPS2000

    So my FPS 2000 has served me well, and is in good working order. However, the long extention DIN male - male cable that came with the unit was damaged in a recent move. This is the long cable used to connect the FPS2000 to the small DIN to Digital cable that plugs into the SBLive! card in my PC.
    Anyone know how I can buy a replacement? Or have the specs on the cable so I can build one?

    I'm also looking for that cable, mine got lost when i moved.
    If you still have the damaged cable you could get the pinout using a tester or something, so that a new one can be built

  • Looking for a specific IPod cable

    I'm new to this forum and I'm searching for a cable. The cable I'm looking for will allow me to hook up my Ipod from the dock connector on the bottom of the IPod to my car stereo using RCA jacks. I also want to be able to charge the IPod at the same time.
    I've found several cables where I can do this indvidually but nothing that will allow me to do both at the same time.

    Try the iPod FM Remote Control

  • Using Male to 3x Female Stereo Splitter Audio Cable with audio out

    The HP Pavilion 22-h031ea all in one has an audio out on the rear of the unit. Is it ok to connect this with a 6:1 audio system with a Male to 3x Female Stereo Splitter Audio Cable?
    This question was solved.
    View Solution.

    Simmo56, welcome to the forum.
    I am not certain that this will work.  However, it won't damage anything to try it.  If it does work, you will not be able to have 6.1 sound.
    Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

    Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

    Extension cables for Thunderbolt don't yet exist, but Apple has recently released a Thunderbolt cable that is 2M or 6.5 feet long.  I just connected my 27" Thunderbolt display to my iMac, which sit about 4-feet apart from each other, and it works perfectly.  You just don't use the Thunderbolt connection cable that is attached to the display - plug the display's power cable in, and use the 6.5-foot Thunderbolt cable to connect the display to the computer. 

  • Looking for appropriate TV-Out cable

    Hey guys... I lost my tv-out cables in a recent move.  Looked all over for them, but they're gone.  The card that these fit is an XFX 7900GT.
    I really have two options.  The first, preferred option is to get a new 7-pin tv-out cable.  I have found one that would be perfect.  Unfortunately, it ships out of England.  (http://www.scan.co.uk/Products/ProductI … arProducts)
    I can't find this particular piece on any other website whatsoever.  I've been looking for something similar (Obviously, I don't want to spend a lot of money having this thing shipped only to not have it work), but so far have had little luck.
    The other option is to use a DVI-D converter, but most only go to HDTV component.  Unfortunately, I don't have an HDTV.
    However, I do plan on buying an HDTV at some point in the future, and would like the cable to support both RCA and Component (as the cord above does).
    Has anyone seen anything such as this anywhere available from a US retailer or e-tailer?  Any help would be greatly appreciated.

    Try setting tv out as the default accessory and then try it out.
    As far as I know Nokia has only one tv-out cable and that's the ca-75u which should be the same one you're referring to. Push the cable in firmly and make sure it goes all the way in. I have two cables and with one of them i have to take the cover off my phone for it to go all the way and work
    Show your appreciation. Hit that kudos button real hard

  • Is the video connector for the powermac g3 beige female or male?

    i just need to know weather it is female or male so i can get a adapter for the video  thanks

    Not that I recommend spending more money on an old G3 than you need to, but an alternative to the on-board Macintosh video output with a VGA adapter, would be to add a PCI card if one of the 3 available slots are empty.  On-board video is limited to 6MB VRAM max.  You can add an ATI Radeon 7000 or 9200 PCI card to get VGA, DVI, s-video output, with support for dual monitors in extended desktop mode.  If you shop around you might be able to find one for only a few times the value of the G3 itself.
    http://shop.ebay.com/i.html?_nkw=ATI+Radeon+7000+PCI+Mac&_sacat=0&_odkw=ATI+Rade on+Mac&_osacat=0&_trksid=p3286.c0.m270.l1313

  • Looking for a 3 meter cable for iPad air

    I'm looking for a 3 meter cable for an ipad air.

    the longest Apple makes is 2M, but Griffin Technology sells a 3M lightning USB cable they claim is iPad Air compatible.
    http://store.griffintechnology.com/usb-to-lightning-connector-cables-3-meter-gc3 6633

  • I am looking for a usb cable for K! that allow using a USB stick on tablet

    I am looking for a usb cable for K! that allow using a USB stick on tablet.
    Lenovo no long makes this item. Was wondering if anyone has one to sell or something.
    Ron Mc

    Assuming your tablet support USB OTG, try this one:
    http://www.amazon.com/gp/product/B0081CRXGI/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1

  • HT204350 I am trying to transfer files from MacBook running OSX 10.7.5 toIMac running OSX 10.9.1.  I verified all software updates installed.  Both connected directly by ethernet cable.  On the IMac I get "Looking for other sources".  On MacBook get "look

    I am trying to transfer files from my MacBook (source) running OSX 10.7.5 to my IMAC  (target) running OSX 10.9.1.  Machines connected by ethernet cable.  On Target machine I get "Looking for other sources" and on source machine I get "Looking for other computers".  Both have clockwise spinning wheel.
    Looking for advise.
    Thanks
    Luap N

    If you are connecting the two computers directly to each other with an ethernet cable, you need a special "crossover" cable to swap the send/receive pins so the data sent from one computer arrives on the "receive" pins on the other end of the cable, not on the "send" pins that you get with a straight cable.
    Incorrect, you do not need a special crossover cable. Any cable will do.

  • I have a Ipad mini and I am looking for a cable to go from my ipad to an Epson xp 400 printer, any ideas

    I am looking for a cable to go from my Ipad mini to my epson xp 400 printer.

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

Maybe you are looking for

  • Authorization issue on comapay code in BI 7.0

    Hi All, We are facing some issue with the company code authorization.We have created analyses auths and these are included in the respective roles. These  roles are assigned to the users based on the requirement. We have used a exit variable for coma

  • Qosmio G40 Video input switch

    Hello, Under Vista Media center, I am able to watch TNT using integrated TNT Tuner. I am also able to watch TV with external TV box (connected to the integrated video input). But I have to reconfiguring the TV Signal under Media Center and lost my TN

  • Slow mouse in Ms Outlook 2007

    Hi there I use a T61 (3GB RAM) recently upgraded to Vista. After installing the vista SP-1, I noticed that my mouse works with the significant time delay in outlook 2007. If use keyboard shortcuts or the keyboard arrow keys, items are selected and op

  • Javascript opoup question?

    My question is in window.open() if i give resizable=no and scrollbars=no is working fine in IE but not working in mozilla anyone can help? Thank You, Sreenu.G

  • Mission control problem

    I have a Cinema monitor connected to a MacBookPro (early 2011) with Mountain Lion; when I lauch the Mission Control I have this behavior A "copy" of the background appears covering the other screens icons. Any idea of the problem ? Thank you, Paolo