Looking for few reports

I am looking for Transaction Codes or Path to get these reports
1 List of customer returns
2 List of goods receipts
3 List of Post Goods Issues
4 List of goods shipped
5 List of adjustment made to inventory by date/person. (Document it)
6 Inventory aging report
Thank you very much for help in advance

Hello Ashish,
His all are transactions identified by mvt type so you can use MB51 to get the information or alternatively you can use MSEG table.
Inventory aging report : you can explore MC.9 here you will get last mvt date, last GR date, Last GI date so it's upto business how you want to consider it for AGING.
Also, you can use transaction code SAP1 to get all report menu, please explore your area to find the relevent report.
Regards
Arif Mansuri

Similar Messages

  • I am looking for few reports

    I am looking for Transaction Codes or Path to get these reports
    1 List of customer returns
    2 List of goods receipts
    3 List of Post Goods Issues
    4 List of goods shipped
    5 List of adjustment made to inventory by date/person. (Document it)
    6 Inventory aging report
    Thank you very much for help in advance

    Hi Ashish,
    MC+A                SIS: Customer Returns, Selection
    VL01N               Customer Returns
    VL02N               Customer Returns
    VL03N               Customer Returns
    MCP6                Goods Receipts
    MB1A                Goods issue
    MIGO_GI             Goods Issue (MIGO)
    COWBHUWA            Goods Issue for Work Order
    MB90                Goods Issue Messages
    VLLA                Picking/Goods Issue
    VL06G               Goods Issue - Delivery
    COGI                Goods Issues
    VLLA                RWE: Picking/Goods Issue Analysis
    VL06G               Deliveries for Goods Issue
    VL23                Goods Issue (Background)
    Small Suggestion, use the tcode search_sap_menu to look for any tcode or report!
    Hope it helps,
    Thanks
    Janani
    award points if helpful

  • Looking for a report in LCM(Landed Cost Management)

    Dear All,
    We are looking for a report in LCM module to print all the unmatched/ partially matched receipt numbers with outstanding balance in accural account.
    Does any one have idea on this? or worked on similar reports before?.
    Detailed requirement:
    There are PO order receipts for which certain costs are estimated viz. Customs Duty, Clearance Chgs. Etc.
    Once the receipt is made, the inventory is valued based on the estimates. Subsequently when the actual invoice for the costs i.e. Customs Duty, Clearance Chg. are booked, there could be a variance. This difference in the estimated and actuals gets transferred to inventory provided stock exists.
    However if stocks does not exist then the revaluation does not happen. In such cases we need to monitor such balances.

    Hi Melvin,
    You can use the User Data Dump tool.  Check out the following post:  https://supportforums.cisco.com/message/3403809#3403809
    HTH,
    Chris

  • Looking for a report as below

    Greeting,
    newbie in VMWare Chargeback, try coouple times, still can not get what I am looking for I am looking for a report for vCloud Director that just include the following information:
    1. Information for ASSIGNED number of vCPUs to VM.
    2. Information for ASSIGNED Memory to VM.
    3. Information for hours for vm ON vs OFF hours
    4. Information for ASSIGNED Storage to VM
    5. Information for USED storage to VM.
    What I got is 3 of this 5 items are 0
    Anyone please give me some hints or direction how to to do that
    Thanks
    newbie

    Dear All,
    Good Day,
    I have two tables Table_1 and Table_2 in MS Accesss with following structure
    Table_1
    Attendance_Date     Name      Time_In
    12-Dec-2014            Smith        7:30
    12-Dec-2014            Mark          8:00
    12-Dec-2014            Rani          7:45
    13-Dec-2014            Smith        8:30
    13-Dec-2014            Mark          7:00
    Table_2
    Attendance_Date     Name      Time_OUT
    12-Dec-2014            Smith        5:30
    12-Dec-2014            Mark          5:00
    13-Dec-2014            Smith        7:30
    I am looking for a report as shown below
    Attendance_Date     Name      Time_In      Time_Out
    12-Dec-2014            Smith        7:30         5:30
    12-Dec-2014            Mark          8:00        5:00
    12-Dec-2014            Rani          7:45           -
    13-Dec-2014            Smith        8:30         7:30
    13-Dec-2014            Mark          7:00         -
    13-Dec-2014            Rani          -                -
    Anyone's help, really appreciate
    Regards
    Abdussalam

  • Looking for a report to get all managed system components

    Hi,
    We are looking for a report to get the support pack level of managed system.
    We can get that by going individually on each system entry in SMSY. Is there a standard report or a transaction in solution managed that can list the support pack level of all managed systems ?
    Thansk you for your help.
    Chak

    Hi,
    Another option you have -- provided that you are running EarlyWatch Reports on all of your systems -- would be to create a single Service Level Report.
    You would create a variant that includes all of your systems under the Select for Reporting column. Then under the Content from Solution Manager tab select the System Configuration -->  Select for Reporting box.
    This System Configuration report will provide you will the hardware info (OS version, CPU, memory), database version, SAP software components/version, and the SAP kernel.
    The SLR allows you to extract and aggregate segments of your EWAs into a single report.
    Good luck.
    Bill

  • I am looking for following report

    Dear Expert ,
                           I am looking for following report , please let me know the T codes for follo reports :
    a) Assembly Log book Entry
    b) Assembly Log book approval
    c) Machine log book entry
    d) Machine Log book approval
    e) Monthly attendance
    f) Monthly progress
    g) Monthly opening balance Entry
    h) Recalculation of Index
    Reports
    b) Daily log book Report
    c) Incentive Details
    d) Incentive Summary
    Points will be rewarded .
    Neal
    Edited by: Neal Gibson on Oct 23, 2008 11:53 AM

    Thanks for your reply . I know SAP1 and SAP2 but I am not HR guy . I just wanted to know th T codes from where I can get those reports .

  • Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

    Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

    Wasn't sure which version you are using, so here are the two i think you might be using:
    [CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
    [CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip]

  • I am looking for Crystal reports arleady designed.

    I am looking for Crystal reports already designed.  Does anyone know where I could fine them?

    Navin,
    Thanks for the reply, I have another question you might be able to answer.
    I have a picture field (blob field) on the same line as our Product ID field (regular data field) and i want the report to show the picture that goes with that Product ID. 50% of our products dont have pictures, so when I print the report, it currently prints large empty spaces for the Products that dont have pictures and makes the report quite long and unattractive.
    I have tried to supress the field and also put the field in its own section and use a formula for supressing if the data is blank, but I get the error message that says "Can not use a BLOB field in a formula".
    I need to find a way around this. Can you, or any of your experts help?
    I could send you the report with some data in it if that would help.
    Thanks again!
    JM

  • Looking for 2 reports

    I am looking for 2 reports:
    1. A report to tie the AA subledger to the General Ledger. In our company, we have several scenarios in which we post retirements/acquisitions with value dates in the past months and post it in the current period (which is open). This causes the balance on the subledger to change as of that value date, which is fine. However I cannot find a standard report to tie the balance to the sub-ledger. The report date on the standard report seems to pick up transactions in the subledger even if they have a future posting date. e.g. Report date 3/31 would pick up transactions that were posted with a value date of 3/15 but a posting date of 8/31. I need a report where I can pull balances by the Posting Date. The auditors need this to ensure that the sub-ledger and G/L are in sync. I am sure this is not an exceptional requirement. Can any one tell me how they handle this?
    2. I need a depreciation comparison report where I can compare depreciations of each period in a year side by side. Something that would have all the 12 periods and the total depreciation for say an asset class.
    Thanks

    Thanks for the response once again. I already know about ABST2 but the auditors want detailed reports. ABST2 just gives you the differences. Now as for the Asset Balances and the FS10N, thats where the whole issue starts. The auditors come in every 4 months and they look at the sub-ledger and G/L for those months to try and tie it out. Here the reason why we have an issue.
    Example: Say the FA balance was 1000000 as of 3/31 and it tied to the G/L as of 3/31. On 9/15 I post an entry to acquire an asset for 30000 with a value date of 3/20. The result is that if you run the asset balances report as of 3/31, it would show a balance of 1030000 and also an increase in the planned accum. However if you run the FS10N and look at the cumulative balance at the end of March, it would be still 1000000 since the 30000 was posted to the G/L in september and not march. When the auditors look at these 2 reports, they think that sub-ledger and G/L does not reconcile. I tried to explain the reason and they understood. However, they need a report to see it.

  • Looking for Simple report

    Hi All
    Hope u are doing well
    I was looking a simple report which gives me celar picture of the stages
    Sales oder no, Invoice numberNo, if on production production ordernumber due date of production order and po invoived to get the production done and trceiving date of POs for the same
    Kindly revert with the best possible option
    Have a nice day
    Kind regards,

    Dear Mona,
    The requirement you have putted on your report is very much complex.As per your scenario this one is only possible when you guys are following the base document otherwise this report is not possible
    Regards,
    Kumar

  • Looking for a report to force the option "after aggregation"...

    Hi guys!
    I read everywhere that the option "before aggregation" isn't available under BI7.0. I wonder if there's a way to force "aggregation after" for all my objects. Like a report, a function...or do I have to set the option on every object in the Bex query designer?
    Does this kind of thing exist on BI7.0?
    Best regards,
    Julien DERIOT

    Hi,
    You have to set option on Every Object.
    Assign points if it helps.
    Regards,
    sandeep

  • Looking for Crystal Reports Server XI R2 SP4 on Windows

    The file on the SAP/BusinessObjects downloads fails with an error. Where else can I get this service pack?
    Also is this the latest service pack available for CRS XI R2 on Windows?
    Regards
    Lawrence

    Bala:
    Please post the url to the download site.
    Business Objects downloads only has SP4 and SP2 for Linux
    Thanks
    Lawrence

  • Looking for a report on user mailbox size in Unity Connection 8.5.1

    Cannot find a report that shows mail box size so that we can identify users approaching limit.
    The canned  reports don't have mailbox size.  Thanks in advance.  Mel

    Hi Melvin,
    You can use the User Data Dump tool.  Check out the following post:  https://supportforums.cisco.com/message/3403809#3403809
    HTH,
    Chris

  • Looking for privilege reporting script

    Some time back (quite some time back, actually!) I had a script that would report all the privileges granted to or inherited by a user or role. It recursed through all of the nested roles to develop the list. I seem to have lost that but hoped someone would know of it or something like it. It seems like it originally came from Pete Finnigan, but I can't find it on his site.

    jgarry wrote:
    [This one?|http://www.petefinnigan.com/find_all_privs.sql]
    That would be the one!
    Thanks.

  • Looking for Standard SAP report

    Hello forum,
    Can some one tell me if there is a standard SAP report that would compare or can be used to compare a delivery order with a sales order and show the changes made in terms of quantity? I am looking for the report name
    Thanks in advance,
    K

    Hello,
    Can some one tell me if there is a standard SAP report that would compare or can be
    used to compare a delivery order with a sales order and show the changes made in
    terms of quantity? I am looking for the report name
    I think your requirement can't be met with standard functionality. The best way to for mapping this requirement would be to create a Custom Report involving two below things.
    Use the program which is called when we access Sales Order --> Environment --> Changes.
    Use the table for delivery item level LIPS for Quantity comparision.
    Kindly try out this approach and let us know if any further issues comes into picture.
    Regards,
    Sarthak

Maybe you are looking for

  • Forward email to a specific address to an Exchange mailbox

    I would like to know if it is possible to forward email to a specific address (for an Identity that doesn't exist) to a user's mailbox. Example: when our employees are terminated we delete their active directory accounts and email mailbox.  I'd like

  • B2B add on issue

    Hi All , currently we hare installing single stack SAP PO .We are  running very  very late . As per client commitment we must install the B2B add on tool in decentralised engine . We are facing the following issue . Can not start com.sap.aii.adapter.

  • Transfer posting problem in  material

    Hi Experts, Whenever we receive any  material ( quality rejection from plant A) at location  X in film plant A, we can not do Transfer posting of this material to crushing area ( location Y in plant A). While doing Transfer posting we get an error "

  • Oracle 11g AMM (Automatic Memory Management)

    Hi All, I have a very powerful server 24 Processors with 6 cores each and 74 GB RAM for my production database. The server will host only one production database. I wanted to use AMM for this database and allocate maximum memory to Oracle by setting

  • Help with TP-Link W8960N

    Keith_Beddoe's guide to replacing HH3 with W8960N seemed very thorough, but I still can't make it work. Please tell me where I'm going wrong. 1. I assume the BT red cable can be used to connect the modem to the TP-link router? 2. Is the userid/passwo