Looking For Field Trial Customers to Test Audio & Video Using Cisco's Intercompany Media Engine (IME)

IntelePeer, Inc. (www.intelepeer.com) is a leading provider of on-demand cloud-based IP communications services, and is currently looking for a limited number of existing users of Cisco's CUBE, CUCM, or CME call processing systems to work with IntelePeer in testing our new hosted audio and video federation applications, including interworking with CUCM systems enabled with Cisco's Intercompany Media Engine (IME) platform. The specific supported Cisco call processing and audio/video specs mentioned above are as follows:
Call Processing:
Cisco Unified Border Element (CUBE) - preferred
Cisco Unified Communications Manager (CUCM) 6.X or higher
Cisco Unified CallManager Express (CUCME) 7.1 or higher
Audio Codecs Supported:
G.722
G.711
Video Codecs Supported:
H.264
H.263
IntelePeer will provide those willing to participate with a no cost SIP trunk, as well as free IME based voice and video usage during the trial. The specific details of the requested test case scenarios, as well as timeframes for testing, will be outlined in detail upon being approved for participation in the field trial program.
Those willing to participate are urged to notify us immediately, via response to this form.
Thank you in advance for your time and consideration. We very much look forward to working with you during this field trial.
Sincerely,
IntelePeer, Inc.

Hello there and yes I would be interested in learning more about your testing program. How can I share a little bit about my environment and we can see I'd we would be a good candidate. Please feel free to reach me at [email protected] or [email protected]
Sent from Cisco Technical Support iPhone App

Similar Messages

Looking For Field Trial Customers to Test Audio & Video Using Cisco's Intercompany Media Engine

IntelePeer, Inc. (www.intelepeer.com) is a leading provider of on-demand cloud-based IP communications services, and is currently looking for a limited number of existing users of Cisco's CUBE, CUCM, or CME call processing systems to work with IntelePeer in testing our new hosted audio and video federation applications, including interworking with CUCM systems enabled with Cisco's Intercompany Media Engine (IME) platform. The specific supported Cisco call processing and audio/video specs mentioned above are as follows:
Call Processing:
Cisco Unified Border Element (CUBE) - preferred
Cisco Unified Communications Manager (CUCM) 6.X or higher
Cisco Unified CallManager Express (CUCME) 7.1 or higher
Audio Codecs Supported:
G.722
G.711
Video Codecs Supported:
H.264
H.263
IntelePeer will provide those willing to participate with a no cost SIP trunk, as well as free IME based voice and video usage during the trial. The specific details of the requested test case scenarios, as well as timeframes for testing, will be outlined in detail upon being approved for participation in the field trial program.
Those willing to participate are urged to notify us immediately, via response to this form.
Thank you in advance for your time and consideration. We very much look forward to working with you during this field trial.
Sincerely,
IntelePeer, Inc.

Hi, Stephen.
Yes, we would be more than happy to speak with you about becoming a test participant for IME. If you could please email me with your contact information, I will get in touch to set up a meeting to discuss.
Please advise.
Thanks much.
Regards,
Scott
Scott Davidson
Product Manager
http://www.voex.com/index.php
2300 15th Street
Suite 100
Denver, CO 80202
303.222-0090 Office
303-818-9183 Mobile
[email protected]

I teach neuroanatomy and am looking for an app that would allow me to use a stylus on the iPad to label a wordforMac or powerpoint document. Any suggestions?

Help needed: I teach neuroanatomy and am looking for an app that would allow me to use a stylus on the iPad screen to label diagrams in wordforMac or powerpoint format. Any suggestions?

I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...

Looking fora camcorder that also has an s-video or rca jack input to convert my vhs tapes to digital

looking fora camcorder that also has an s-video or rca jack input to convert my vhs tapes to digital.

Hi ltcps,
Thanks for writing us!
None of Canon's current camcorders include S-Videos, RCA or other auxiliary inputs.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

TS4268 Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

iPhone 4 does not support FaceTime over cellular, only Wi-Fi.
You need iPhone 4S or later and also only if the carrier supports it,

Looking for app similar to Nicecast (Internet audio streaming)

I am a new Arch user migrating from Mac OS X. I am looking for an app similar to Nicecast from Rogue Amoeba.
Nicecast takes an audio input (a mic, for example), provides some basic, real-time filters and outputs to an Icecast server. (Both Icecast and Shoutcast support would be ideal.)
Suggestions?
Thanks.

Thanks for the reply. I do know BUTT; I used it in OS X a few times. It can do the broadcast portion but lacks the effects filters of Nicecast.

Looking for someone on x86_64 to test a snippet of C#

I'm having trouble getting a piece of C# code to work. It's 100% correct and was found working by two users running x86, however on my x86_64 it doesn't.
It should display an icon in the notification area ('system tray'). For me it won't show the icon in gnome, but neither in openbox + trayer. The other two x86(!) users tested in on Gnome as well, and did get the icon to show up.
I'm looking for someone else on x86_64 to test this code, to eliminate (or confirm) that it's a very obscure x86_64 bug. Make sure you're fully synched up - that is Mono 1.9.1, with (preferably) Gnome 2.22.3 (but if it won't work on KDE/Xfce/anything else that pretty much identifies the problem as well).
You can find the 20-line snippet at http://pastebin.com/m4ebdcba6 (save as Test.cs)
Compiling is easy, `mcs -r:System.Drawing,System.Windows.Forms Test.cs` should do the trick, followed by `mono Test.exe`. You will get a messagebox, and at that time it *should* display the icon.
Thanks.

I have Arch64 on Intel Core2Duo, with [testing] repository enabled.
I use KDE 3.5.9. I could try it with KDE 4-svn later as well
Mono version: extra/mono-1.9.1-1
I tried that file and when I disable autohiding of my panel, it works correctly:
http://img389.imageshack.us/img389/5647/screen1lf1.png
If I hide the panel manually (by using the hide button on the right), and I show it again, the icon disappears, but the space is still occupied:
http://img519.imageshack.us/img519/473/screen3on2.png
When I have auto-hiding disabled, it appears fine (just like in the first picture), but when the panel hides and appears again I get black rectangle:
http://img242.imageshack.us/img242/3091/screen2ye7.png
The first time I tried it, the rectangle was white instead
Last edited by tanis (2008-07-15 16:16:06)

Looking for a Fully Functional HTML 5 Audio Player that has a playlist capability

Does anyone know how to build, find or purchase a full functioning HTML 5 Audio Player that has a playlist. I have found the small single mp3 player but I am looking for a full functioning Audio Player that can load and play several tracks from an album etc. I see beautiful HTML 5 Video players everywhere but it seems no one has figured out how to make an awesome Audio Player that plays multiple songs. Help

You can try these :
http://amazingaudioplayer.com/how-to-insert-an-html5-audio-player-to-your-webpage-with-ifr ame/
http://www.musegrid.com/adobe-muse-widgets/audio-widget
http://www.muse-themes.com/blogs/news/8285249-embedding-a-mobile-tablet-friendly-audio-pla yer
Thanks,
Sanjit

I Am looking for parameterisation documents and UAT test cases of all modules,

Hello Team,
Flexcube 12 version test cases, I do have them but looking for flexcube old version. If any body can share it will be help full and there will be some meaning in become a member of this group. my id is
[email protected]

p.lagatta wrote:Jon, Thanks for the reply. The Siderwinder Firewalls associate a Multicast MAC address with the vIP. That's the reason for the static ARP entry in each router. Since our Layer II switches located between the firewalls and routers do not register the MAC with a specific port, both firewalls receive the traffic. Once the traffic reaches the firewalls, they pass information across a heartbeat interface and the selection process is based on odd / even ports. Receive traffic is already working in this configuration. Both our external routers are peered with two EBGP routers located in the same AS. The GLBP implementation will allow us to load balance the traffic each firewall is sending to the GW address.
Perhaps i'm misunderstaning.
If there is one mac-address then GLBP will assign that mac-address to one of the routers and it will keep that router for forwarding the traffic with the same mac-address. So the traffic will always be forwarded by the same router. GLBP works by assigning different source mac-addresses to different routers within the same group but it sounds like the source mac-address is always the same from the firewalls.
Jon

What is the Firefox start page looking for when it tells me I'm not using the most current version and need to update Firefox? The check for updates button says my version is up to date, but the start page disagrees. Is there a setting I need to adjust?

Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?

I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people.

I need help! I bought an external drive to backup the computer. but although the computer recognizes it (shows up on the right side with the icon - mybook3.0 - I cannot get time machine to look for a hard disc - it only wants to use airport!

I want to use time machine. So, I got a mybook3.0 and hooked it up. the computer recognizes it fine (shows the icon on the desktop etc) but time machine refuses to look for any hard disk, going on airport instead and refusing to let me select anything or do anything manually (buttons are not clickable - and anyway, no HD at all shows)
I'm getting frustrated!!
PLEASE HELP

Just to clarify - when you run Disk Utility (in your Utilities folder) the drive you bought doesn't show up in the window under your boot drive?
If it appears on your desktop, you should see it in the Disk Utility window as this displays all mounted drives.
You then click on the drive (Mybook3.0 or whatever it appears as), and choose Erase from the options on the right.
Best Wishes.

Looking for good canned demo of WLS 5.1 using SQL

I am looking for a good canned demo that i can install on a WLS 5.1 machine that is similiar to the PetStore demo on the WLS 6.0B2 download... something that can be setup and shown on a moments notice...
thanks

Hi,I am using wls 5.1 and also use it as an app server and webserver.I need to set the mime type for ms-excel for it to display excel sheets.I have modified the properties as follows.
weblogic.httpd.mimetype.application/vnd.ms-excel=xls,xlw,xla,xlc,xlm,xlt
weblogic.httpd.mimetype.application/vnd.x-excel=xls,xlc,xll,xlm,xlw
I am unable to read the charecters which appear as junk .Also in the log i see the following
Tue Mar 06 15:19:12 PST 2001:<W> <WebLogicServer> Found undeclared property: web
logic.httpd.mimetype.application/vnd.ms-excel
Tue Mar 06 15:19:12 PST 2001:<W> <WebLogicServer> Found undeclared property: web
logic.httpd.mimetype.application/vnd.x-excel
Any clues as to what i may be doing wrong?
Thx,
vamsi

I am looking for a Meeting/ Screen Sharing Application on iPad2 using which I can provide presentation/ screen sharing to other iPad or Windows PC.

I am looking for presentation/ screen sharing application for iPad 2. Similar to WEBEX or GoToMeeting using which I can give presentation using an iPad.

For sharing between iPads, this might be worth a look:
http://www.ideaflight.com/
Cisco has a WebX application for the iPad that says it allows scheduling, hosting, and attending meetings. There is a client for GoToMeeting for iPad, but I believe that you can only attend, not host.
Regards.

Looking for a trial version of Premiere Pro CS6 (or Production Premium CS6)

I suppose much has changed since Creative Suites started going to Creative Cloud. I can't say that I am pleased with the idea, but it seems to be making my search for an upgrade rather difficult. I've been considering updating my Production Premium 5.5 to PP CS6 but figure a trial version of at least Premiere Pro CS6 makes sense. I can't find the traditional trial download anywhere.. except maybe on the cloud pages. Anybody know where I can get a trial without all the tribulations? Also, I'm curious about how other editors feel about Adobe and Premiere going to CC?
Thanks

For anyone looking to back up your box versions,
get 'em while they're hot:
Direct Download All Official Adobe CS4 and CS3 Free Trials
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Direct Download Adobe CS5 Free Trials
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
Direct Download Adobe CS5.5 Free Trials
http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
Be sure to read: "Note: Very Important Instructions"

I am looking for the trial version of Dreamweaver CS6 to download yet it does not seem to be available. Is there a way for me to download this product or has it been taken off of the market?

The trial version for Dreamweaver CS6 does not seem to be available anymore, or am I looking in the wrong location for it?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
Purchase CS6 products:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

Looking For Field Trial Customers to Test Audio & Video Using Cisco's Intercompany Media Engine (IME)

Similar Messages

Maybe you are looking for