Looking for Freelance/ Part Time LabVIEW opportunities in Midlands UK
Hi All,
Along my full time Mon - Fri job as Automation Software Engineer (Siemens TIA Portal, step7 simatic manager, WinCC Flex, s7-graph, Proagent and NI LabVIEW),
I am looking for additional freelance/ contract opportunities in writing LabVIEW code for machine control and product testing purposes. I am not limited to coding, I can happily specify and install DAQ systems/PLC systems, sensors, do panel wiring, etc
I am LabVIEW trained Controls Engineer with 3yrs experience; also beeing lucky to have completed over 9 different courses to date in NI Training Centre, Newbury. However CLD or CLAD is not something what I have acquired yet.
Target audience includes machine builders and integrators requiring LabVIEW application written for their equipment. My work examples can be provided upon request which covers Test programs written in automotive industry for Digital and Analog IO control, LVDTs measurements, RS232 coms, Barcode Scanners, Printers, etc,
I do have my own LTD with public liability covered, so no issues here.
Best Regards
Tom
Warwickshire
我们现有一项目需聘兼職LabVIEW工程師, 有意请电邮:[email protected]
Similar Messages
-
Hello ,
I am looking for a part-time labview job, remotely.
Have 6 years labview experience, participated on different projects.
Main qualifications - large scale software architecture,costum hardware IO, signal processing.
Recently started to work as a freelancer, my page at oDesk.
Regards,
Michael.
LV 8.2 at Windows & Linux我们现有一项目需聘兼職LabVIEW工程師, 有意请电邮:[email protected]
-
Part time LabVIEW programmer needed
Hi All,
I am looking for a part time LabVIEW programmer to help maintain and enhance
an existing LabVIEW application.
The company is located in Central Florida area - someone local would be most
desireable. The program is fairly complex and interfaces with proprietary
DAQ hardware. If you have less than 2 years of experience, its probably
more than you would want to tackle.
Goto http://www.rgm-isis.com/ to see product info
http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
If you are interested please respond to [email protected], please don't
respond to the E-Mail that this is posted from.
The web site also has phone numbers and addresses.
Thanks
ChrisChris;
I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
Generally, we tr
y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
If you are interested and want further information, feel free to contact me at [email protected]
Regards
Eric -
Part time labview contracts sought
Hello,
I'm looking for some part time labview (and/or c,c++, pascal)
programming work to supplement my student stipend. I have 2 years
experience in labview programming and I'm trained as a physicist
(experimental condensed matter). Please be in touch for a CV and further
details.
best regards,
Seb James
Sebastian James
IRC in Superconductivity
University of Cambridge
Madingley Road
Cambridge, CB3 0HE, UK
work: +44 (0)1223 337040
home: +44 (0)1223 526107
fax: +44 (0)1223 337074
email: [email protected]im fresher in control & instrumentation with basic knowledge in LabVIEW currently looking forward for a job. herwith i have attached my resume. eagerly waiting for an opportunity to gain experience in my core
Attachments:
Aarthirajan..doc 50 KB -
CLD Looking for Freelance/Consulting Work
My name is Joe Dowdle. I am a Certified LabVIEW Developer looking for freelance and consulting work. I currenly work full time but am available evenings and weekends to meet and work. The best way to contact me is by email during the day: [email protected] I am located in central Illinois and am willing to travel on weekends/evenings as well as work remotely.
Below is a brief summary of my education and experience. There is more information available on my LinkedIn profile (click here). I have spent the last year working on NI-based (hardware and software) hardware-in-the-loop (HIL) systems for ECM software testing and am continually involved with that.
Education:
B.S. in Electrical Engineering, Controls/Power
Certificate in Electric Power Engineering
B.S. in Business Administration, Accounting/Finance
Certifications:
Certified LabVIEW Developer
Engineer in Training/Engineering Intern (NCEES)
LabVIEW Coursework:
Core 2 & 3
Real-Time 1 & 2
FPGA
Connectivity
LabVIEW Experience:
Real-Time
FPGA
Veristand (custom devices, custom controls/indicators)
If you have any work available for me please don't hesitate to contact to discuss a timeline and rates. As mentioned earlier, email is the best way to get a hold of me during the day ([email protected]), but I will return phone calls as soon as I can (267-536-9353).
Sincerely,
Joseph R. DowdleI'm not in NYC but I'd be happy to help.
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"ramachan" <[email protected]> wrote in
message
news:eid318$t58$[email protected]..
>I do not know if this is the right place to post this but
i am lookig for
> freelance actionscript guys to help me with several
projects... insteaad
> of
> fishing for free advice I would rather share cash and
have a few regular
> actionscript guys who would like to be feed regular
work...
>
> I am a freelance designer who is a bit tired of
pretending to be a
> developer
>
> [email protected]
>
> Thank you
>
> sorry if this is in the wrong place
> -
Singapore Part Time Labview Programmer Needed
Hi all,
We are a Biomedical engineering company looking for Part time Labview Programmer which can assist us in developing Labview related projects such as DAQ, Motor driver, Vision capturing system. Preferably have some knowledge in interface design and motor control although no necesary.
Interested parties please email me at [email protected] for further discussion.
Warmest Regards
TC
Singapore.Hi,
I am quite intersted in ur job.. I will be free through this summer from may 15 to july 15 .. I am doing my masters in US .. I can come down to singapore at my own expense I am quite intersted in the work and would like to get more information on it so i can plan out things. -
I am looking for a manual of LabVIEW
Greetings, all!
I am looking for a manual of LABVIEW that I can download.
Also I'm looking for any examples, wherefore LabView can be used
in electronic applictions and datasheets of the IEEE488 protocol.
Thank you for your time and attention,
and for any help you can provide!
Jeroen Verbeke, Software Engineer, Summa, Inc.
Provinciebaan5A,8680 KOEKELARE, West-Vlaanderen BELGUIM
tel.(0496)6834910
[email protected]The link for any manuals from NI is http://digital.natinst.com/manuals.nsf/web/byproductcurrent
The link for examples is http://www.ni.com/support/dnldgtwy.htm
And A link for IEEE 488 documents is
http://standards.ieee.org/reading/ieee/std_public/description/im/488.2-1992_desc.html
Note: IEEE charges a fee for the document.
I hope that this helps,
Bob Young
"jeroen verbeke" wrote:
>Greetings, all!>I am looking for a manual of LABVIEW that I can download.>Also
I'm looking for any examples, wherefore LabView can be used>in electronic
applictions and datasheets of the IEEE488 protocol.>>>Thank you for your
time and attention,>and for any help you can provide!>__________________________________________________________>Jeroen
Verbeke, Software En
gineer, Summa, Inc.>Provinciebaan5A,8680 KOEKELARE, West-Vlaanderen
BELGUIM>tel.(0496)6834910>[email protected]>>>>
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected] -
I am looking for a real time CRM consultant who can teach me in Bangalore ?
I am looking for a real time CRM consultant who can teach me in Bangalore ?
Call me on 7204246238If you are looking for a Creative player only The Zen V and Zen V plus are good options. I think they will satisfy most of your requirements.
Strike that, I don't think this will act as an "external hard dri've" as described in bMessage Edited by fdreinthea on 2-2-200605:37 AM -
Looking for freelance Captivate programmers - LA/OC area
Urgent need! Looking for freelance Captivate programmers - LA/OC area - For development of e-learning programs for Large Corporations. Please contact me if you have the skill set and are in the area. Thank you
Hi I am interested in this. I am an Adobe Certified Instructor based in London and I have been training and using Captivate since it was made by Macromedia. You can find some samples of my work on my website here and my email address is [email protected]
I hope to here from you soon
Mark Waterfield -
We are a UK South-West based LabVIEW consultancy company looking for a LabVIEW programmer preferably with advanced signal analysis and processing skills, to become part of the team or work as a short term contractor. We will be looking to advance their skills through a range of different projects that we work on, from aerospace test and measurement, through to shop floor data collection and User Interface marketing.
Must have at least two years experience in LabVIEW and have an electronic engineering based degree or be able to show signal analysis is an area of expertise. We are looking to fill the position as soon as possible.
Please your CV’s to the below address.
[email protected]If the candidate had all the correct attributes then it could indeed be an option.
Regards
Peter -
I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc 77 KB
CV_SalimDARWICHE_EN_S.doc 229 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
I am a software engineer with lots of experience in embedded and test systems. I am a certified TestStand developer, and recently finished a cRIO based embedded system for a medical device company using LV RT and LV FPGA. I have done a lot of TestStand customization and APIs to HIL and other test equipment and created my share of Windows/Linux based C++ applications and libraries.
I am located in Southeast Michigan and interested in both local and remote project work, as well as full or part time employment.
I will be at NIWeek 2010 on Wednesday and Thursday. I am holding a session on Simple TCP/IP messaging on Thursday.
If you would like to meet during NIWeek and/or request my resume please email me at [email protected]I saw your posting on the LabView discussion forum concerning your need for a LabView Software Systems Engineer.
I am a consultant and I am currently available for contract work.
I have done the things you describe as experience you would like to have.
I have attached a "Fact Sheet" which describes some of the systems I have built.
You will notice that I am experienced with developing hardware systems and controls as well as software systems..
I have over 20 years of experience developing these kinds of systems and have worked with many different kinds of hardware/computer interfaces as well as numerous different software environments.
If you are interested in discussing this further please call or email me.
Tom Moser
ForMost Systems
North Canton Ohio
330-470-0404 begin_of_the_skype_highlighting 330-470-0404 end_of_the_skype_highlighting x202
email: [email protected]
Attachments:
IS 071410a .pdf 253 KB -
Looking for freelance website and application designers
Hi,
I am looking for someone to help me to setup a subscription based online downloadable products selling website. I have a static website that I had for the last three years but now want to use it for selling subscription based products.
If you can please let me know if there is someone who can provide this service, in a short period of time.
Many thanks,
senaitAshleydean
I'll be free for freelance DPS projects (in London) from 9th July and my email address is [email protected]
Please don't hesitate to get in touch if you require any assistance, or I'd gladly show you my work.
Steve -
Looking for small part for HPw2207 monitor
Hello. I am looking for a small circuit board part for my HPw2207 monitor. After searching for solutions to a OSD Lockout problem, I found that pressing the Menu button for 10 seconds should stop it. However, the switch itself seemed stuck in the "on" position. So, as I am fairly adept at repairing things, I decided to open the monitor and see what the problem was. Well, I found it. After discovering how to remove the front and rear plastic bezel, down at the bottom of the monitor, where the Menu buttons are, there was a small circuit board housing and switch button assembly, that was all corroded. I removed it to look closer and what did I find?? It was CAT PEE!!! One of my wife's cat's must have sprayed the corner where these switches are, and as cat pee is very acidic, it had completely corroded the 3 pins on the circuit board connector, and froze up 3 of the 4 micro switches. So now, my only recourse to fix this is to order a new circuit board assembly. So......this is my question.
Are these parts still available, and if so, how do I order them. I do have some numbers from the circuit board itself, which is held in place with the button assembly by two small screws.
On the front side of the circuit board, there is a number, which may or may not be the complete assembly number or perhaps the circuit board number, but I'm not sure. Here it is.
7900771500000R
On the back side of the circuit board(green side) there was this number.
490481500600
I don't even need the entire assembly. Only the circuit board. I just purchased this monitor and can't afford another one.
I may be able to use the monitor withOUT the circuit board in place, if it will work. I'm going to reassemble it without it to check. But if this circuit board is available, I would sure like to get one so I have access to the Menu items. Since these monitors are still being sold(at Staples) I assume parts MUST be available, but from my experience in searching HP...well, I wouldn't doubt they arn't. But just in case...that's why I am posting this thread. Thanks for any help.
Oh...btw...the CAT is GONE now. History. Good riddance too. He pee'd on more than this monitor too. Ruined half a dozen things of mine and this was the last straw.
Thanks
Rick
This question was solved.
View Solution.Hi Rick,
You might look on eBay for the part or Google the part number. HP considers monitors consumables so internal parts are not stocked.
I don't think an extended warranty will cover TCP (tom cat piss) even if you had one.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Part time Labview programmer NEWARK, DE
looking for a labview programmer to complete some small jobs. must be familiar with motorized stages, CCD imaging analysis, data handling. More work possibly to follow.
Hi,
This refers to your requirement for LabVIEW programmer in Newark, DE.
If you need the
latest in virtual instrumentation technology with a team to help with the details of the system
or if your company has been using LabVIEW and you need a team of experts to
develop for you then consider us. We offer the most competitive rates and the highest quality of service available. We can provide a LabVIEW consultant on-site and with the aid of
our engineering team and state-of-art R&D facility your company’s software issues will be
a thing of the past and you will be operating like clock work.
Please reply to this message and let us have your contact details so we can quote you. Be assured, there is no need to compromise on quality and deliverables in order to cut costs!
Best,
Aum
Maybe you are looking for
-
hello my name is marco and my ipod was stolen during school its a 4th generation 32gb. i need help in how to start a process to finding it or tracking it i also have the serial number if that helps, the phone number to apple where i can report it mis
-
Pages 5.1 - vertical lines in a table
I have a large document that, for regular formatting purposes, is entirely a table. At various points there is a black vertical line that appears on the inside of the right-most edge of the table. I do not know what it signifies, nor how to get rid
-
Iphoto 4 unexpectedly quits on launch
My iphoto application (version 4.0) has suddenly started "unexpected quiting" on launch. I've tried rebuilding my iphoto library (holding down the shift+options keys when launching iphoto) and it runs through the cycle of rebuilding the library, but
-
I am looking for Demo Voltage Read VI
I have just begun with labview and according to a tutorial I am looking for Demo Voltage Read VI . where can I find this? Solved! Go to Solution.
-
Can't find the HD version of the movie
So, a few days ago I saw a HD version of the movie "This Means War", so today I was going to buy and I couldn't find this version anymore. I'm the only one?