Looking for general info on compression invovlving Logic

I use logic express and it comes with a plug in compression but I was thinking of investing in something proper to get better vocals etc...
I write chart type music, has anyone any recommendations on units or any general direction to go as Im not too well informed in what to purchase.
thanks
Basser

You're probably going to get better results going to the Logic forum. This is the Compressor forum. You can also try Soundtrack Pro.

Similar Messages

  • My wife and i share a computer. when she looks for her info in mycloud my info appears in her account.

    my wife and i share a computer. when she looks for her info in her cloud acct on the desktop my info appears in her account. Cannot understand why her info from her phone would appear to be nowhere and mine is in her account. Help us understand this please?

    On the shared computer click on System Preferences -> iCloud -> Account Details verify that each individual account is configured correctly. By default, the Apple ID used to install the computer the first time is used for all accounts on the computer, unless it is changed.
    Please start here - http://www.apple.com/support/icloud/account/
    This might also be helpful - http://www.ilounge.com/index.php/articles/comments/syncing-multiple-icloud-data- with-a-family-mac/

  • Looking for some info before deciding to install

    Normally, I would try to some searching before posting, but I've been pressed for time lately. Anyways, I'm looking for some info about Solaris before deciding to dive into installing it.
    1) Can it be installed on what's a currently triple-booting system without problems? In this case, Solaris would be installed onto half of the slave HD.
    2) How difficult and lengthy is the installation process?
    3) Does Solaris come with it's own unique bootloader? Can it recognize other operating systems? Is it possible to not install that bootloader and simply edit the configs for a preexisting GRUB to allow it to boot Solaris?

    The only way to get content into the Music app is via iTunes store downloads or syncing with itunes on a computer. You will need to find a third party media player such as VLC (whick integrates with DropBox and GoogleDrive, if that appeals to you).

  • Looking for some info, Creative is not much help.

    Looking for some info, Creative is not much help. Ok, right now I have an Audigy 2 ZS Platinum. It can use the digital inputs to decode either Dolby Digital, DD EX, DTS, and DTS ES to the analog speaker outputs. (Also a 5. setup.)
    I recently built a new PC, and would like to replace the sound card, but I use that feature (as well as some others). Seeing how Creative doesn't want to easily display the capabilities of there cards, I would like someone to let me know what card will allow the fallowing in Windows XP, Vista, and theoretically Windows 7.
    Hardware decoding of Dolby Digital, DD EX, DTS, and DTS ES and allow a proper 5. playback through analog speakers.
    Recording of whatever is playing out of the the speakers. The recording selection is labeled "What U Hear")
    The reasons behind me wanting to buy a new card are simply that I would prefer to run it through PCI-Express, and have full compatibility at the release of Windows 7 without any loss of features I need. From what I can tell, if things work in Windows Vista they will work in [email protected]

    All I can say to you (someone correct me if I'm wrong) is that Xtremegamer's doesn't decode DD/DTS via hardware with official drivers (altough they're capable of - all X-Fi are capable of decoding). XtremeMusic does the job with official drivers. I don't know the rest of the models. Someone adds [email protected]

  • My iphone after syncing with my mac is saying "64 items could not be synced, see i tunes for details" however I cant see what items are not synced as no obvious message. Where do I look for this info?

    My iphone after syncing with my mac is saying "64 items could not be synced, see i tunes for details" however I cant see what items are not synced as no obvious message. Where do I look for this info?

    Connect your phone to iTunes, then right-click on the name of your phone on the left sidebar and select Reset Warnings.  Then sync again and you should get a warning listing the problem files.

  • Looking for basic info on queue prefetch

    I'm trying to get an idea how queue prefetch works, and what's it for.
    I'm working with Tibco queue and it looks like the default setting is 5 for prefetch.
    Also I'm interested in interaction between queue prefetch setting and an XA transaction.
    We had some problems related to that (lost messages).
    I'd like to hear from anyone who dealt with any of those issues.
    Thanks,
    Mark

    I'm going to answer my own question in case anyone is looking for similar info.
    This bit from ActiveMQ documentation talks about the prefetch setting:
    http://activemq.apache.org/what-is-the-prefetch-limit-for.html
    As for the problems with XA transactions and prefetch settings those turned out to be related to Mule ESB, which apparently is not very stable.
    Mark

  • Looking for best soluce to compress a DVC Pro 25 movie 3min

    Hi,
    (sorry for my poor english, i'm french...)
    I am looking for a good soluce to compress a DVC Pro 25 movie (during 3minutes).
    I must to compress this movie to reduce the time to transfert by FTP a 750Mo file,
    when the file is transfered, i must decompress to create a "new" DVC pro 25 for editing with final cup.
    i think (but i'm not an expert in this domain) it is possible to obtain a good compression ratio ( 25%, 50%, or better ?)
    Can you respond to me :
    1) What is the better soluce , compressor ? or ohter software ?
    2) What is the codec to use ? MPEG2, ... ?
    3) What is the possible ratio
    4) what is the time to compress on a mac pro ?
    Thanks for all,
    Best regards

    Hi,
    Thanks for your answer,
    but my "problem" is that i dont have a mac,
    i try to obtain a soluce for this situation to transfer quickly
    and after the user must to edit the movie (letter, logo,...)
    so, the quality must be "good" or "very good"
    Are you sure the MPEG2 H264 codec is good for this ?
    I know, i can with bitrate, adjust the quality, but i can't make a try...
    If somebody can't try for me, just to inform the size after,
    Thanks for all,
    bests regard,
    Laurent

  • Looking for FREE info on app submission process

    Hello,
    I am looking for information on the app submission process to assess the feasability.  I am at a very, very early stage at this point and would like to get details on the technical requirements, any finacial requirements, and an approximate timeline for an iOS app submission.
    I have poked around on these forums and found some info, but most of it seems to be locked behind the paywall.  As I stated before, at this time I am not looking to pay the $99 to sign up as a developer without getting some of the very basic background information.  Does anyone know of any handbooks or publications with the details that are available for free?  Am I just looking in the wrong place?
    Thank you in advance for your time.
    -Spencerm1

    Hmm... that's a shame.
    I am definitely more serious than simply looking for blog topics, but I am not in a position to fully commit to something that may have requirements I can't meet at this time.  I'll keep poking around.
    Thanks!

  • Hallelujah, finally disabled OOPP. I use Firefox 9.0.1 and will not upgrade to anything that ignores my settings. Been looking for this info for years!

    As soon as Firefox came out with OOPP, I immediately asked how to permanently disable it and had a Firefox developer straight-up lie to me and say it couldn't be done without downgrading. Thank GOODNESS for the instructions on https://support.mozilla.org/en-US/questions/713600?page=1 Finally, finally I have excised the hated OOPP!
    I run Firefox 9.0.1 and will not upgrade, ever, unless I see signs that Mozilla has radically altered its development direction and discarded most of the boneheaded, broken, anti-user development that has gone into versions more recent than Firefox 1.x. Actually making your mission statement more than an empty promise might be a good place to start.
    Let's see...anything else? Oh yeah, any developer who advocates overriding or ignoring user settings, or taking control away from the user, should be kicked off the team. (and investigated as a possible Government mole, but that's a lot to ask for). I hear Konqueror and Safari are looking for new devs. It gets old fast when you try to get support and instead get haughty "You're doing it wrong, stop doing that" responses. I'm doing exactly what I intend to be doing and if you can't support that, someone else will. If you really gave a damn about your users, you might start by backporting security fixes to previous versions instead of spewing out a cacophony of incompatible new versions so rapidly you end up confusing and alienating users and making them switch updates off entirely. I mean seriously, what happens when Firefox hits triple digits? You could stick a decimal in front of it, and name that build after a historic baseball player who had that batting average. But even then you will run out of players in a few months.
    It's truly sad. I switched to Firefox because it was the best browser. But Firefox has been backsliding horribly since around 2.0, and the other browsers seem to be in about the same boat. Firefox IS still the best browser - but only if you use an ancient, unsupported version. That's a big problem.

    Using an obsolete version released [http://www.mozilla.org/firefox/9.0.1/releasenotes/ December 11th 2011] is the exact definition of downgrading. It exposes your system to all the security vulnerabilities that have been fixed since then.
    * https://www.mozilla.org/security/known-vulnerabilities/firefox.html
    Out-of-process plug-ins was made mandatory on Windows Vista and later because Adobe don't test Flash Player's protected mode with OOPP disabled. This change didn't happen until Firefox 14, so there was no need to go as far back as Firefox 9.0.1.
    If you absolutely have to, you can disable OOPP by creating the ''MOZ_DISABLE_OOP_PLUGINS'' environment variable and setting its value to '''1'''. Firefox must be restarted for the change to take effect. This works in the current version of Firefox, so there's no need to use obsolete insecure versions.<br>
    If you don't know how to create an environment variable, see the following article for instructions (the "Using the Custom Environment Variable" section is not relevant).
    * [http://www.howtogeek.com/51807/how-to-create-and-use-global-system-environment-variables/ How to Use Global System Environment Variables | How-To Geek]

  • Looking for some info on how to play music files on IPAD2

    Hi and thanks for sharing.  Trying to figure out how to play sound files such as wavs or mp3s on my ipad2 while I browse the internet or use my computer.  I was trying to see if the music feature will play my songs or if I can import downloaded files from the net to itunes and if that will play in the background.  I have an audio program that can send sound files to email and was trying to figure out how, similarly, to get this play in the background while I do things too.  That and sound files downloaded from the internet.   Do these go to iCloud when you download them?  Can I import sounds into itunes with my iPad someway.  (It's the only computer or device I own).   Basically looking for a pathway to get music from my audio program that's sent to email, and clips I've DLed off sites on the internet, to play while I use the pad or browse the net.  Thanks for your intel on the mission.   Cheers!

    The only way to get content into the Music app is via iTunes store downloads or syncing with itunes on a computer. You will need to find a third party media player such as VLC (whick integrates with DropBox and GoogleDrive, if that appeals to you).

  • Look for general blog on Java technologies

    Hello,
    I am greatly interesting in Java and look for active blog on Java technologies. I found 1000 of blogs posted in this forum but many are very specific or not active anymore. Could you please advise me good java blog with regular posting and interesting articles on different part of Java?
    thanks
    sebastien

    To write JNI code for integrating of an activeX is not a simple task. You will face with a number of problems related to COM:
    - when and where to call CoInitialize and CoUninitialize,
    - how to clean up COM references on Java Application exit,
    - when to do Thread Marshal and when it is not needed for COM interfaces;
    - how to Marshal and Unmarshal COM parameters in Java methods calls to COM Interface methods, etc.
    The best decision is to use some Java-COM Bridge.
    My company has developed tools like
    - Java-COM Bridge
    - Object-Oriented JNI SDKs for C++ and .NET (v1.1,v.2.0) languages (do not mix with JNI wrapper generators). These are an object-oriented maps of the regular JNI SDK,
    - Add-Ins for MS Visual Studio v.6.0 and v.7.1 that generate Java wrappers in C++, C#, J#, MCpp, VB for Object-Oriented JNI SDK.
    So we know problems you have.
    See our site
    http://www.javain.com

  • System information when looking for storage info, also finder crashes

    Can anyone help please!
    My Finder crashes when doing simple tasks.  Also, when loking for storage info in system info it crashes.  All other system info works ok!  Many thanks!  New Mountain Lion Installed, problems since then!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Looking for general SD flow for business

    Hi All,
    I want to know general SD flow for a business and detailed information about Order, Billing, Delivery datasources.
    Please let me know where i can get documents for above information.
    Thanks
    Vijay

    hi,
    look at this
    [Re: SD flow In BW|Re: SD flow In BW]

  • Looking for More Info on Java Web Service

    Hi Everyone,
    Where can i find More info on Java web Service in BPEL? Is there any link or documentation for this? I looked at the tutorial and the only info available is:
    B.2.7 Java Web Service
    This service enables you to publish a Web service from a Java class. A wizard creates the WSDL document and deployment files needed to publish your code as a Web service. After you select the class and methods you want to publish, the wizard generates deployment descriptors, a JAX-RPC mapping file, and a WSDL document that can be deployed to an application server.
    Thank You,

    Sure,
    one way would be to upload the files to XE using the WebDav feature of the XML DB. You find more information here: http://daust.blogspot.com/2006/03/where-are-images-of-application.html
    Another option would be to configure a standalone Apache as a proxy server to XE. This way you can configure the Apache any way you like.
    HTTPS with Oracle XE ?
    Re: Existing http server
    For correctly logging the remote IP you will need the following workaround:
    Re: How to get X-Forwarded-For value?
    Regards,
    ~Dietmar.

  • Looking for general idea

    Hello,
    I am writting AS 2 Lite BREW application and I want parts of the application to be upgradable.
    How can I do that?
    Just general idea needed. Simpliest way?

    Flash Lite 2.1 extends the capabilities of the BREW platform to run Flash-based content for applications.
    satellite tracking

Maybe you are looking for