Looking for graphics adapter driver for Presario c700 video

Looking for graphics adapter driver for Presario c700 video

Please read the XP Downgrade Guide at the link below:
http://h30434.www3.hp.com/t5/Notebook-Operating-sy​stems-and/General-XP-Downgrade-Guide-for-HP-Laptop​...
The guidance for installing XP on your model series can be found under the section labeled 2. Moderate Models.

Similar Messages

  • I am looking for a Mac driver for a Muratec MFX 1430 printer/fax/copier.  Is there one out there for a Mac?

    Looking for a Mac driver for a Muratec MFX-1430 printer/fax/copier
    is there such an animal out there?

    http://www.muratec.com/new/support/drivers.asp does not appear to support that model at all on the Mac.
    Some open source drivers* may exist to support it.
    * Links to my pages may give me compensation.

  • Looking for HP 5371A driver for Labview 6.1?

    want to communicate with HP5371A by PC over GPIB port

    I think that device is too old for finding a driver for labview. If you have all the GPIB command, it's easy to program. I made it for another type of instrument.
    Benoit Séguin
    Software Designer

  • Vga standard graphics adapter driver update

    Hi does anyone know where I can find an updated VGA standard graphic adapter driver.? or what make it is?My young one is trying to play Roblox but keeps getting a message that the driver needs to be updated.Also if it is possible to install an other graphics card.

    Hi,
    You need to be running DirectX 9 at a minimum and it's not on your PC per PC image that you posted. You can try installing Directx but I suspect that you might need a video card.  If you need a video card, then it's an older AGP style, 1.5v card that would be rated for Directx 9 and would work with the power supply size in your PC.
    Good luck!
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    This is an Altec Lansing IMT227 OrbitM etc
    Is this what you have?
    Here is the specification, please note, no USB
    You are either mistaken or talking about a different model.

  • Updating graphics card driver for G5350uk

    Hi
    We have a G5350uk desktop. Serial Number:   [edited Serial Number by Moderator]  Product Number:   XS612EA.  Its running 64bit windows7 and internet explorer 8, which is no longer compatible with a number of web pages so we wanted to upgrade to ie11.
    Except we can't upgrade because we don't have service pack 1 installed.  Service Pack1 can't be installed because our graphics card driver is one of those that stops the windows update from functioning properly and detecting Service Pack 1.
    So I tried to upgrade the device driver, but its says its the most current one, so I loaded the Intel untility which told me I needed to source the driver from the manufacturer.
    So I came to the G5350 support page and allowed it to scan my PC.  I get then get into a loop with the annoying message pasted below.
    HP was unable to verify that you have this product, but did find other products.
    HP G5350uk Desktop PC
    » Software & driver downloads
    » Support & troubleshooting
    » Learn how to help HP find your product
    and then
    Select an option for a product below. Some products may be scanned to identify recommended drivers, updates, and solutions.
    »HP G5350uk Desktop PC
    Serial Number:   [edited Serial Number by Moderator]
    Product Number:   XS612EA
    » Software & Driver Downloads
    » Support & Troubleshooting
    Which is all very frustrating as i'm clearly searching for the right thing, the web site says it can't find what I'm looking for but then tells me its found exactly what I'm looking for!  When I select the option suggested it just goes back around in the same loop.
    I stil don't have an updated graphics card driver to get around the Service Pack installation issue and so still can't look at an increasing number of websites.
    What am I missing?
    Thanks

    Mazrak, welcome to the forum.
    This is the only driver that is available for your Integrated Video.  You can't use retail versions of drivers for HP's Integrated Video.
    I suggest uninstalling the current driver by going into Control Panel / Device Manager / Display adapters.  Right click on your adapter and select "Uninstall".  Then, you can install the driver that I provided and reboot.  This may solve your problem if a glitch has occurred.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Problem With Macbook Air 5,1 Graphic Card Driver For Windows 7 - 64 bit

    Hello everyone,
    I have a macbook air 5,1 , ver 2012-2013
    I Installed Windows 7 64bits Ultimate on my macbook, and i downloaded the latest boot camp and i installed it too!
    After finish Installing Boot Camp, everything looks fine until it finshes and then i restarted my mac,
    Then i found out that my Graphic Card is not working!!,
    I Reformated the System 10 times and i tried diffirent versions for example (32 bits) and (home premium) - (Enterprise)
    And Still the problem is the same..
    It is working perfectly with MAC OSX but on windows it doesn't
    I Searched a lot for drivers for intel hd 4000 in intel's website and i downloaded it, but the system is failing when i tried to install a driver from out side boot camp
    so i reformat it!,
    and now i am working on it without graphic card
    Please help!!? any suggestion i would be thankfull <3

    Thanks for sharing your tip RatioCynic!  That's what this forum is all about!
    Happy printing!
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

  • Looking for external hard drive for Mac book air

    I'm looking for a external hard drive for my Mac book air

    What features are important to you?
    Size?
    Capacity?
    Speed?
    Price?
    Reliability?
    HDD or SSD?
    Desktop or portable?
    Just about any USB external drive will function properly, with only a few exceptions. I would avoid the Toshiba Canvio using USB 3.0, as it has been the topic for numerous threads here wherein users have had problems using them with the MacBook Air.
    My personal favorite external HDD right now is the Seagate GoFlex, as I can use them with the Thunderbolt adapter. But I have been eyeing the new LaCie Rugged Thunderbolt.
    For super speed, I use a Crucial model M4, either using the Seagate Thunderbolt adapter, or I have some mounted in USB 3.0 housings.

  • Satellite 4090XCDT- need video adapter driver for WXP

    Hi all,
    Apologies if I have posted in the wrong section,,
    I've recently acquired a 4090xcdt and have installed Windows XP on it.
    The main problem is that I cannot find a suitable driver for the video adapter. All I can seem to find is a rather varied lot of win 95/98er. The adaptor is a trident cyber 9525dvd any help would be appreciated..
    Regards to the group... Scott
    Having trawled the net for the last four hours.

    Hi
    I have searched a lot of time in the internet for the XP drivers but without any success.
    It seems the trident XP graphic drivers do not exist.
    Unfortunately, in my opinion you have to use the standard XP graphic driver if you want to use the XP on this unit ;(

  • Looking for Keyence Instrument driver for LV.

    Looking for instrument driver for LV developed for the Keyence LS-7500 series micrometer. Has anything seen any or done this already? Any help would be greatly appreciated. BTW I have already checked NI's listing of instrument drivers to no success.

    Hello-
    There are no drivers listed for this instrument at http://ni.com/idnet. You may want to contact Programmed Test Sources to see if they have a LabVIEW driver for their instrument. If they don't, you can easily create a low-level driver by configuring an I/O assistant VI for each function in the manual. Once you have this low level driver you can just combine functions to make higher level VIs. Alternatively, you can hire an Alliance Member to write an driver for you.
    Alliance Member Directory
    http://www.ni.com/alliance/alliance_member.htm

  • I am looking for a backup drive for my macbook pro, any suggestions?

    I have a macbook pro and I am looking for a backup drive.  There are so many out there and I would like suggestions for which one to purchase.  Thanks!

    Pretty much any drive will work, but for a laptop, you might like to get a portable drive (doesn't require that you connect it to power) with USB3. Thunderbolt drives are also available, but they're more expensive and no faster than USB3 for a single hard drive.
    I personally like the Lacie rugged series: http://store.apple.com/us/product/H9377ZM/A/lacie-1tb-rugged-hard-drive-triple-u sb-30-5400-rpm?fnode=5f
    If you shop around you should be able to get it a little cheaper than Apple's prices.
    Matt

  • Looking for HP E1725C driver for Labview 6.1?

    want to communicate with HP E1725C by PC over GPIB port"

    I haven't been able to find a driver for this instrument anywhere. You may want to contact HP and see if they have one, though it does not look like they do. You will probably need to access it directly through GPIB calls. Use the GPIB VIs to send strings which the instrument accepts. It should have come with a manual or something which supplies the valid strings. Just use those along with the GPIB VIs (actually, I would suggest using VISA) to build your application.
    J.R. Allen

  • Looking at External SSD Drive for Lightroom Editing - How Can I Set This Up and Which Drive?

    I'd like to purchase an external SSD drive for Lightroom editing and am hoping somebody can provide a recommendation for me.
    I'm using a FW800 G-Drive to store my Lightroom Library and have been using this drive to edit.  I'd like to add an external SSD drive for editing photographs an am looking for recommendations on which drive and the best way to set this up.  I plan on having a 3rd (and maybe 4th) to save both the FW800 files and working SSD drive files as a backup.
    Any recommendations are sincerely appreciate. 

    I believe I was loading a preview file to 100%.  I think maybe I should just use what I have and work with it.  It's much faster than my 7 year old MBP performed that's for sure.
    I was just wondering if I could spend a few hundred for an external Thunderbolt or USB 3 drive to speed up my productivity.  With the full time job and the kids, I have a little time to work on photography.  I'd love to increase my output.  I'm more than willing to spend the money on the TB or USB 3 if it would help.
    The specs on the camera say 24.1 million pixels:  24.6 MB.  The raw files are
    NEF (RAW): 14 bit, compressed

  • Looking for a hard drive for a 2007 Macbook Pro

    I am looking around to replace my 160 gig hard drive for something larger.
    These are my choices:
    Hitachi 500GB Travelstar SATA 7200 RPM
    Hitachi Travelstar 5K500.B - 500GB 2.5" SATA 5400 RPM 8MB
    Fujitsu MJA2500BH-G2 500GB 5400 RPM 8MB
    I am just looking for something that won't wear down the battery, vibrates or produce some noises. Some speed increase would be nice if possible.
    I may pick the Hitachi 500GB Travelstar SATA 7200 RPM. But I am not 100% sure if this is a good drive or not.
    Message was edited by: Sean Coon

    I would choose anything that Other World COmputing would recommend.
    But before I swapped out to a 500GB drive, I would make sure I had redundant backup plans in place: both an external local drive, and offsite backup.
    500GB is an awful lot of data to lose when the drive fails. And it WILL fail at some point.
    What can you possibly fill up 500GB with? If movies or music, that stuff may be better off on its own, small, sleek, 7200RPM hard drive all the time (plus an offsite backup). If you're editing movies, the professionals don;t use their main drives for that - they use quality external drives for editing and storage (plus, of course, an off-site backup).
    Yes, I upgraded my MacBook Pro's hard drive to 200GB (original 7200RPM option was only 100GB). But I cannot fathom - ME, personally - filling up my MacNookPro's internal drive with 500GB of important data. I have a music drive, and work on other large work files on external 7200RPM drives.
    Whatever you do, please have reliable, regular backup schemes in place.
    Clint Bradford

  • Hp netserver 10 100tx pci lan adapter driver for windows 7

    Hello,
    I bought a new notebook HP Pavilion 15-e036sc with windiws 8 (64bit). I uninstalled this windows version and I installed windows 7 (64bit) with servis pack 1, but I can´t connect to internet, because windows haven´t driver for net adapter (hp netserver 10/100tx pci lan adapter). Where is download the driver for my net adapter for windows 7?
    Thanks!
    Pavel

    Hi pajyn, welcome to the HP Forums. It doesn't appear as though HP offers Windows 7 drivers for your notebook.
    HP Pavilion 15-e036sc Notebook PC Drivers
    You will have to determine which network module is installed, and find the drivers from the manufacturer, if they exist.
    These instructions might help you get the PID and VID keys. Avoid any downloads from this site as I have not verified their integrity. How to Identify Unknown Devices in Windows
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • How to get the output of a subprocess

    Hi all, I am trying to create a process in which I need to use a gateway with a number of branches. Within each of these branches I need to call a subprocess (in which I have a user assignment) where the user fills in a form. Each of the branches are

  • Why does my older PDF files print an all black background and white letter/numbers?

    I have a laserjet 1536dnf MFP.  Printing older adobe pdf's results in an all black background with white letters / numbers.  How can i correct this.  It doesn't happen with newly created PDF's from the 1536dnf scanner.

  • Flash banner in a Dreamweaver Template

    Hi all, I am using one of the provided Dreamweaver Templates (CSS). All is fine, except that for some reason it does not like Flash imports. I can alter the template as much as I like and it will always successfully change across the site, BUT if I t

  • Loose screen?

    I have a slightly old Macbook (2008/09) that looks like the Macbook pro. Lately I've noticed that the screen is loose and wiggles baack and forth when I move my computer. Is there any way this can be fixed? aditionally, it takes about 4 hours to full

  • UCM Query expression

    Hi, all From following UCM query expresion SELECT * FROM ora:t:IDC:GlobalProfile WHERE ora:p:xTargetGroup = 'aa'. I know xTargetGroup is an extended metadata of a content in UCM, but i don't know what is a meaning of ora:t:IDC:GlobalProfile and ora:p