Looking for "Group by intervals.rpt" sample in Feature Example Directory

I am CR2008 user.  I am  learning cross-tab skills via the help tutorial files.  The current exercise uses the *Group By intervals.rpt* sample report which is apparently located in the Feature Example Directory however I have combed my installation and cannot find it. 
Searching these forums I've only seen mention of it in relation to CRIX.
Can anyone point me in the right direction?

It comes in CRXI R1 and R2. As you are learning CR2008, you can download it from the following URL though its created in CR XI R2:
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Select
              Software Product --> Crystal Reports
              Product Version --> Crystal Reports XI Release 2
              Software Type --> Sample
Click on search button and download the first zip file.

Similar Messages

  • I am looking for the cheapest way to sample simultaneo​usly 4 or more channels at 2Ms/s (ore more).

    it's very important for my application both sample simultaneously and rapidly (more than 2 MHz).
    I know that I can use a digital oscilloscope but it's limitate to 2 channels and to much expensive.
    I'am looking for a smart and cheapest way to perform my application, if it's possible.

    Timmy,
    Your best solution is to use a PCI-6110 simultaneous sampling board which can sample each channel at a rate up to 5 MS/s.
    If you are using the PXI platform, you can use the PXI-6115 which can sample each channel up to 10 MS/s simultaneously.
    Both of these boards can be found in the National Instruments catalog available online at www.ni.com

  • Looking for ebook reader app with good annotation features

    I'm looking for an ebook reader app to use on my iPhone and iPad that will allow me to do this:
    1. In a book, Highlight a selection of text, and make that a note or annotation
    2. Be able to see all my annotations/notes for a book in one place
    3. And here's the one I can't seem to find: Be able to generate a file with JUST my annotations in it so that I can save it off or email it or dropbox it or something like that.
    Does anyone know of such an app?

    I HAVE THE PERFECT APP!!!
    I had been looking for an app that did the same things you requested. And somebody finally created it.
    Its called Readmill
    www.readmill.com
    You can export all of your notes/highlights as an email.
    It also syncs your ebook library with Dropbox
    Here is the interview that Robert Scoble did with the makers of the app.
    https://plus.google.com/111091089527727420853/posts/Tce1E52MPo2

  • Looking for Users but Terminal says No such file or directory

    Hi I'm trying to delete something out of my DVD Studio Pro cache but when I look for the Library it has gone. I've tried calling it up in Terminal with 'chflags nohidden ~/Library' and it comes back with No such file or directory. Has anyone lost their library completely?
    Thanks,
    Des

    Are you entering that command with the quotes? If so remove them. Also, use Go to folder (Cmd-shift-g) and enter just ~/Library. I bet everything is still there.

  • Looking for customization best practices related to Timezone feature in EBS

    Hi all,
    We are updating our 11.5.10.2 env to deploy the TImezone feature and i'm anticipating some issues for the customized code as i'm not sure the developers followed best practices about handling dates.
    Is there any documents where i can find the best practices to follow for customized coding in order to be compliant with the EBS Timezone feature ?
    Like for instance, Date APIs usage or the work to do to convert Date data for interfaces ?
    Thanks in advance
    Chris

    Is there any documents where i can find the best practices to follow for customized coding in order to be compliant with the EBS Timezone feature ?
    Like for instance, Date APIs usage or the work to do to convert Date data for interfaces ?I do not think such a doc exists.
    You may review these docs and see if it helps.
    User Preferred Time Zone Support Guidelines for Applications 11i10CU2 [ID 330075.1]
    User-Preferred Time Zone Support in Oracle E-Business Suite Release 12 [ID 402650.1]
    Globalization Guide for Oracle Applications Release 12 [ID 393861.1]
    Also, please log a SR to confirm the existence of the doc you are looking for.
    Thanks,
    Hussein

  • Look for JDeveoper 10g Web Services Samples

    We would like to use JDeveloper 10g to create Web Services and create JSP pages to use them.
    If you know a good starting point or where I can find examples, please let me know. I have found some for 9i, but I hope 10g will make the job easier.
    Thanks a lot.

    My original message was referring to Mike's following response.
    The problem is, in the oc4j10.0.3 generated stub, there is no
    m_httpConnection = new OracleSOAPHTTPConnection();
    so how do you set up the proxy properties to the connection?
    Quote
    It may be that you require a proxy server, optionally with proxy authentication to access the Internet from within your intranet. If you are using a proxy server as I am guessing here, look inside your stub for the line that reads:
    m_httpConnection = new OracleSOAPHTTPConnection();
    then after it add these lines:
    Properties props = new Properties();
    props.put(OracleSOAPHTTPConnection.PROXY_AUTH_TYPE, "basic");
    props.put(OracleSOAPHTTPConnection.PROXY_USERNAME, "proxy_username");
    props.put(OracleSOAPHTTPConnection.PROXY_PASSWORD, "proxy_password");
    props.put(OracleSOAPHTTPConnection.PROXY_HOST, "proxy-host");
    props.put(OracleSOAPHTTPConnection.PROXY_PORT, "80");
    m_httpConnection.setProperties(props);
    where "proxy_host" is your proxy serve, "80" is your proxy server port and if your proxy requires a username/password, update the lines above where username and password are defined; otherwise delete those lines.
    Mike.
    unquote

  • Looking for a podcast viewer/controller w/ specific features

    I need a podcast viewer/controller that will allow me to type in the specific time to "go" to w/in the podcast, like 1 hr, 36 min, 27 seconds. This would solve a host of challenges for me.
    If it also allowed for note-taking tied to the times indicated (w/ no limit to the # of times indicated, or a very large limit) it would be a God-send!!
    Does this exist? Does something resembling this (as closely as possible) exist?
    If so, what is it called & where can I find it?
    Thank you.

    phrakture wrote:
    Ichji wrote:Like I stated above I did not want to rely on multiple Applications like running that panel, using that Wallpaper Manager and this or that WM...
    They're always multiple applications.  Even in gnome and KDE.  (gnome-panel, kicker, etc etc)
    I am currently not able to express what I meant (at least in english)
    It is just for example that at GNOME we have the GNOME Foundation and one big group of people working on it and if we compare that to the combination of fbpanel and blackbox (just an example) there we have the group developing fbpanel with a goal and we have the group developing blackbox also with a group and likely with an different approach. GNOME haves one group, one approach, one goal and most important guidelines to follow.
    I hope I was at least capable to give you a glimpse of what I meant...
    Oh and stonecrest thanks for the Link.

  • I'm looking for a music player with the following features:

    Hi everyone,
    I'm setting up a linux desktop for the first time. I'd like some directions on finding a music player. Here are my criteria, in order of importance:
      - Can play (at least) ogg, mp3 and wav
      - Prefers a 'playlist approach' (m3u) to a 'media library' approach
      - Can play songs without breaks in-between
      - Fast startup
      - Simple interface (ex. VLC beats mplayer)
    My window manager is pekwm. This is for usability reasons, not performance reasons - my comp. can handle all the bells and whistles you throw at it (actually, I tried with my doorbell, but I wouldn't recommend with the church bell). (sorry for the bad humour). Crazy visualisations and features whose sole purposes are to eat up CPU cycles are O.K.
    Good support for keyboard would be appreciated - I am a pekwm user.
    So what have you got?

    MPD rocks, runs here for months without major problems.
    The client side is very flexible, you can choose many players:
    http://www.musicpd.org/clients.shtml
    For X, for console, etc..
    Edit:
    MPD supports Icecast also, to create streams.
    Last edited by mephisto (2007-05-15 14:00:36)

  • [SOLVED] Looking for a tiling WM with a certain feature

    I've been using openbox/pekwm for a few years I recently tried tiling window managers again (tried them a few years ago and hated them) and I'm hooked but after trying just about all of the popular ones and reading the man pages/web sites I can't find any that have a certain feature I'd like (maybe I've just completely missed it). What I'd like is to have firefox in the master area (left hand side, about 50-60% width), whatever else I have open (usually one or two terminals and thunar) in the slave area and then pidgin buddy list open in a small thin area on the right hand side of the screen.
    I'm not fussed about status/task bars or anything like that (but being able to add my own would be a bonus), prefer no window borders (like i3 or wmii) and would prefer something easy to configure (I don't mind learning haskell if xmonad is perfect for my needs but I'd rather avoid awesome as I've heard the config changes often and I'm not too keen on the built in task bar etc)
    Thanks
    Last edited by descendent87 (2010-02-16 14:12:41)

    descendent87 wrote:what's the difference in dynamic and manual tyling managers?
    Dynamic tilers have one or more pre-defined layouts for you to choose from and arrange the frames accordingly, while in manual tilers, you choose the size/arrangement of frames yourself.
    What I'd ideally like is something where I can set so that firefox/chromium/uzbl (whatever browser I'm using) always opens in the master area, pidgin always opens in the far right hand side and anything else (terminals, thunar, mplayer) always opens in the slave erea (inbetween web browser and pidgin).
    Well, this is doable with musca, though I've never even tried to set it up that way Though it's probably along the lines of:
    * Put commands in a ~/.musca_start file
    * In this file, set up frames as you want using commands like hsplit, vsplit, etc.
    * Set focus to the frame you want browser to appear in (also with above commands), start browser, dedicate frame to browser so no other window will appear in the same frame
    * focus next frame, start Pidgin
    * etc.
    Unfortunately, this won't work with multiple browser windows, for example, since the dedicate command won't allow several browser windows to appear in the same frame. Also, my solution is *very* ugly (seems more like an Excel macro to me rather than a properly scripted solution ). There's probably a lot more possible with proper use of wmctrl, but I never got around doing much with it. If you really do want full control over your layout, I should probably recommend Xmonad, but I've had zero experience with it (a >500MiB ghc is a little spooky).

  • When I start Firefox 6.0, it always looks for updates, even though I have this feature turned off in Options. How do I change this?

    This isn't a big issue, just annoying.

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • Looking for a JPEG display App with specific features

    Is there an Apple iPad app that can display large (15MB to 25MB) JPEGs, with pinch to zoom in 100%, the ability to display full 1920x1080 via AirPlay to an Apple TV, AND... show a list of these JPEGs by filename and not just thumbnails?

    Most cloud music players will only access their cloud folders, not
    an indépendant FTP folder.
    I did find one that kinda works - DeadOn Player. 
    but it's buggy and crashing.

  • Looking for updateTask, delegateTask samples

    Hi all,
    I'm looking for some complete and good samples of how to use updateTask, deletegateTask, ... in workflow context (BPEL manager or java API).
    The scenario is quite simple:
    - a user U1 has to complete a task
    - after a while, if U1 does not complete it, the task will be transfer to user U2
    - ... etc
    U2 is a random user. There is no hierarchical link between U1 and U2 so it's not a "real" escalation scenario ...
    I hope somebody can help me ...
    Cyryl

    Hey Green,
    1. Yes, AKAI converts ok to EXS, no sweat!
    2. Logic! Open the EXS, drag the 4 CD-Roms to A Folder on the HD,
    if this folder is on a different partition from Logic, make an Alias
    of that folder and drag it to the Library (have a peak on the manual
    to know where to drop it, probably: System>Library>Application Support>Logic>Sampler Instruments).
    Then in EXS (top right) Click on options AKAI Convert.
    Simple.
    3. I have my samples on a 5400rpm drive (Powerbook).
    I have a dedicated drive for audio (7200 rpm LACie).
    To convert and load samples for the first time it may took you a bit.
    but once you have load a bank it's pretty fast.
    I've just Loading say, the London Choir Ahs Bank (boys & girls),
    in 2 to 3 secounds! :o)
    Once it's loaded it's just like a preset, don't worry.
    Best regards,
    Jorge

  • Looking for Web2Py or Python interfacing code to DI Server

    Dear All,
    I am looking for a Web2Py (python) code sample that can interface or talk with DI Server of SAP B1 say through win32 python API SOAP interface.
    Some sample to get me started in the right path to connect to DI server, login and access simple SAOP service.
    Thank you very much.

    I don't know if you'll find an exact sample here - you might be lucky of course, but I think it's a bit specific.
    Instead, I would focus on learning the two separately; look on google for some examples of writing SOAP interfaces using Python and then also do some DI server examples.
    The Python I can't help with, but for DI server you can check the SDK helpfile and go to Developers Guide -> DI Server and then under this you have lots of good sections:
    System Messages: Shows how to login and get the session ID
    Data Manipulation Messages: Shows how to add/update/remove objects in the DB
    DI Server application gives instructions on how to set it up.
    Hope it's useful, might be worth keeping thread open to see if anyone has done this before though

  • Looking for a special app

    im looking for an app that has a lock feature an allows me to store other apps within it to keep them hid from the kids

    No. The SDK does not allow apps to edit the "core" kernels of the iPhone. Such an app would manipulate installs or the springboard, both of which are "core."
    Unless Apple changes the nature of the SDK (doubtful) then no programer has the necessary access to create such an app.

  • Looking for a skype phone that works via pc

    I currently own the philips voip 321, great phone for the past couple of years, but a bit dated, basically im looking for a phone that has the same feature. I can use my computer to call somebody, and just pick up the phone and talk to them, or if somebody calls me the phone rings and i can enter pick it up using the phone or the pc.
    Most of the new skype phones are just internet based without the need for computers, which is great, but i prefer the computer to phone routine, are there phones like this around?

    One named NotePad is free, saves as .txt files.
    Another, WriterRoom, costs $1.99USD, and saves as .txt and .doc files.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for