Looking for help-------"application failed to start because UID.mr.dll"

I've been having troubles with my Windows Vista PC recently and had to even system restore it just to be able to turn the computer on successfully, though it is still being buggy. However, I have been working these out and now all that remains is this error:
"PhotoshopElements.exe - Unable to Locate Component'>
This application has failed to start because UID.mr.dll was not found. Re-installing the application may fix this problem."
I have tried re-installing and it has not fixed my problem. Is my install file corrupt or something? What can I do to get Photoshop Elements 2.0 up and running again?

PSE2... on Vista... (First thing its not supported on Vista.. First PSE version supported on Vista is PSE5.0.1 and PSE7 is there in market)
Your installation completes successfully?
If yes what do you do and when do you get this error.
In the mean time I will try to get some info about the dll you mentioned.
+ Ripple

Similar Messages

I can,t install iTunes 11 for Windows application failes to start because MSVCR80.dell was not found Windows 7

I cant install itunes 11 for Windows 7, application fails because MSVCR80.dill is missing from my computer

Hopefully this article will assist you:
≈≈≈≈≈≈≈≈
http://support.apple.com/kb/TS5376
≈≈≈≈≈≈≈≈
Please do reply with results/questions.

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

I already had itunes installed on my pc. I received an update and tried to install it. I got a message
This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
How do I repair/sort out this error/fault
Thanks
David

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

HT1199 I updated Itunes on my PC and now when i try to open Itunes i get a error message saying "application failed to start because MSVCR80 was not found" then whenI close that pop up I get a error message saying "windows was not installed correctly Erro

I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659)

Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found". This error message is seen when first starting Windows Vista, prior to starting Photoshop Elements 12.

Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1
It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

HT1925 This application failed to start because msvcr80.dll was not found.

I experience followig problem.
This application failed to start because MSVCR80.dll was not found reinstalling this applicationmay fix this problem.
Why doesn't Apple provide an adequqte update to fixthis problem?
This privious iTunes updat caused this problem so they are responsible fo an update correction.
Is there an Apple iTunes update te be expected?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

After updayting fire fox the applixation will not open I get a message that says the application failed to start because its side -by - side configureation is in correct. please see event log or use the command sxstrace.exe tool for more detail

fire fox will not open

See:
*[[/questions/910134]]
Seems to be caused by a corrupted Visual C++ installation (multiple versions can be installed side-by-side; SxS).
You can try to use the sxstrace.exe tool to see if you can find which files are missing or corrupted and (re)install missing Visual C++ libraries.
* http://www.vistax64.com/software/245768-side-side-configuration-incorrect.html
* http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-ad68-465e18e3f3ef

My i tunes is not working anymore. it says the application failed to start because MSVCR80.dll was not found. I have tried re-installing the program but it doesn't work.

Hello,
Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
Itunes.exe - Unable to locate component.
This application has failed to start because MSVCR80.dll was not found.
Re-installing the application may fix this problem.
I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
THANK YOU!!
Cyn

Hello there, Cyn.
The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

This application failed to start because it's side-by-side configuration is incorrect....

This is a redirected question from
here
While trying to run YouCam.exe, i encountered the error message,
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail. "
I then searched the forums and installed a slew of updates that mostly VC++ Redistritutable 64-Bit version, DotNetFix etc etc but it still did not work.
I then ran 'Event Viewer' and pulled out the error logs for the YouCam program.
"Activation context generation failed for "C:\Program Files\CyberLink\YouCam\YouCam.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0" could not be found.
Please use sxstrace.exe for detailed diagnosis."
I am using a Fujitsu SH760 laptop which is running a Win7 64-bit Enterprise OS.
Note that I do not have the recovery disk.
Please assist and if you require further information, i will try to give it asap.
Thank You.

I ran sxstrace.exe and here is the log file i obtained. Details as follows,
=================
Begin Activation Context Generation.
Input Parameter:
   Flags = 0
   ProcessorArchitecture = Wow32
   CultureFallBacks = en-US;en
   ManifestPath = C:\Program Files (x86)\CyberLink\YouCam\YouCam.exe.Manifest
   AssemblyDirectory = C:\Program Files (x86)\CyberLink\YouCam\
   Application Config File =
INFO: Parsing Manifest File C:\Program Files (x86)\CyberLink\YouCam\YouCam.exe.Manifest.
   INFO: Manifest Definition Identity is YouCam,processorArchitecture="X86",type="win32",version="3.0.1104.3278".
   INFO: Reference: Kanten.X,type="win32",version="1.0.0.0"
   INFO: Reference: Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0"
   INFO: Reference: Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0"
INFO: Resolving reference Kanten.X,type="win32",version="1.0.0.0".
   INFO: Resolving reference for ProcessorArchitecture Kanten.X,type="win32",version="1.0.0.0".
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Kanten.X.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Kanten.X.MANIFEST.
               INFO: Manifest found at C:\Program Files (x86)\CyberLink\YouCam\Kanten.X.MANIFEST.
           INFO: End assembly probing.
INFO: Resolving reference Kanten.X.mui,language="*",type="win32",version="1.0.0.0".
   INFO: Resolving reference for ProcessorArchitecture Kanten.X.mui,language="*",type="win32",version="1.0.0.0".
       INFO: Resolving reference for culture en-US.
           INFO: Applying Binding Policy.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Did not find manifest for culture en-US.
           INFO: End assembly probing.
       INFO: Resolving reference for culture en.
           INFO: Applying Binding Policy.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Did not find manifest for culture en.
           INFO: End assembly probing.
INFO: Resolving reference Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
   INFO: Resolving reference for ProcessorArchitecture WOW64.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
               INFO: Did not find manifest for culture Neutral.
           INFO: End assembly probing.
   INFO: Resolving reference for ProcessorArchitecture x86.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: Find publisher policy at C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_516d712b0f495a45.manifest
               INFO: Publisher Policy redirected assembly version.
               INFO: Post policy assembly identity is Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4940".
           INFO: Begin assembly probing.
               INFO: Attempt to probe manifest at C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc.manifest.
               INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc.manifest.
           INFO: End assembly probing.
INFO: Resolving reference Microsoft.VC80.CRT.mui,language="*",processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4940".
   INFO: Resolving reference for ProcessorArchitecture WOW64.
       INFO: Resolving reference for culture en-US.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en-US.
           INFO: End assembly probing.
       INFO: Resolving reference for culture en.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en.
           INFO: End assembly probing.
   INFO: Resolving reference for ProcessorArchitecture x86.
       INFO: Resolving reference for culture en-US.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en-US.
           INFO: End assembly probing.
       INFO: Resolving reference for culture en.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en.
           INFO: End assembly probing.
INFO: Resolving reference Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
   INFO: Resolving reference for ProcessorArchitecture WOW64.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFC\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.MFC.DLL.
               INFO: Did not find manifest for culture Neutral.
           INFO: End assembly probing.
   INFO: Resolving reference for ProcessorArchitecture x86.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFC\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.MFC.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC.MANIFEST.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC\Microsoft.VC80.MFC.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC\Microsoft.VC80.MFC.MANIFEST.
               INFO: Did not find manifest for culture Neutral.
           INFO: End assembly probing.
   ERROR: Cannot resolve reference Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
ERROR: Activation Context generation failed.
End Activation Context Generation.

What happened? After this morning Firefox's update, I couldn't get into Firefox but got this message, "The application failed to start because it's side-by-side configuration is incorrect.

This morning I went to go into Firefox, a message came up stating it was updating. After the update, Firefox didn't open, so I clicked on the icon and got this message. C:\Program Files (x86) Mozilla Fire\firefox.exe. The application has failed to start because its side-by-side configuration is incorrect. I tried removing & re-installing and I even try the Window's restoration point of a couple days back and I still get the message. Has anyone had or have this problem?

You can click the link in my above post if you haven't done that yet.
*https://support.mozilla.org/questions/910134
That SxS error seems to be caused by a corrupted Visual C installation that requires some DLL files to be reinstalled.
*http://www.vistax64.com/software/245768-side-side-configuration-incorrect.html

Looking for help-------"application failed to start because UID.mr.dll"

Similar Messages

Maybe you are looking for