Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Similar Messages

I cannot find anywhere the BASIC DRIVER ONLY for the Officejet 7410xi for Windows 7 32-bit system.

Does anyone know where it is?
Basic driver only, win 7 32-bit.
I do not want the full feature becuase the installation has repeatedly fatal errored during installation

Hi:
What I would do is this...
Download but do not run the full driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Download and install this free file utility.
http://7-zip.org/
After you install 7-Zip, right click on the full feature software and driver file and select the 7-Zip option from the menu.
Select Extract to: and let it extract the file to the file name of the folder so it will be easy to find in the next step.
Now I think the driver you need is in the hposcu01 setup information file.
So, when you are ready to install the printer driver and you select "Have Disk" to navigate to the driver files, browse to the folder 7-zip extracted the files to\hposcu01, and select the HP Officejet 7400 from the list of devices and see if the driver installs that way.

Buying a 2,5" external FW400 drive only for Photoshop CS2 as Scratchdisc?

i am a retouching professional
and use a pb 15" and a ACD20".
do you think it makes sense to buy a
2,5" external FW400 drive only for Photoshop as Scratchdisc?
2,5" therefore, as it needs no powersupply
by wire. that elegant i guess,
my images have 1,5GB on the disc, and use often 4GB RAM in Photoshop CS2 but i only have 2GB RAM in my pb 15" 1,67 from late 2005.
its very slow sometimes as Photoshop (PS) scratches onto my external drives which are all nearly full of stuff and heavyly fragmented.
so , i had that idea of buying a drive only for PS, which is always "empty" and PS can use it for scratching large data onto the disc. i would format it everyday in order to prevent fragmenting (?) and be able to work fast,
thats my goal, just to work faster. its really slow sometimes as i suffer from too less RAM. of course i am buying a G5 quad later with plenty of RAM but for now i have to work with my pb .... and need a better working solution
anyone thinks it makes sense?
if yes, how big should the disc be, 20GB , 40Gb, or more?
if the file in PS has 4 GB RAM, and has 30 layers or more, how can i find out how many GB space it needs on the scratch disc?
i would like to buy this one:
http://www.sarotech.com/english/cgi/pd.cgi?cmd=view&rno=8
Cutie EX
[IMG]http://i1.tinypic.com/v80774.jpg[/IMG]
if 40GB would be enough i could save more money, but if you say i need 80, its also ok. which model/brand of disc would you put in? i am looking for a quiet one, 7200rpm and at least 40 or better 80GB. but quiet would be important.

thanks for your help.
i had another idea now: i copied my stuff from my internal pb to my external FW 400 disc. now i have 40GB free space in my internal.
- is this enough for photoshop scratch disc?
- should i also define the other 3 discs (external) as Photoshop scratch disc (possible in the prefercenes of Photoshop, up to 4 discs can be used as scratch discs)
- what about the system scratch disc, do both interfere themselves or bother?
- better also copy the image i work with in Photoshop to the internal powerbook drive which has only 5400 rpm or better leave it where it is now on the external FW400 drive 7200rpm?
thanks

Are QOS BUM Policer BUM Parameters applicable for virtual ports or only for non virtual ports?

Are QOS BUM Policer BUM Parameters applicable for virtual ports or only for non virtual ports?

Just FYI.
I probably overestimated RHEL/OEL-5.3 capability to "compete in Music Showbiz" as a digital studio workstation OS. Seems that "very old" alsa kernel drivers (1.0.17), compiled with actual kernel, don't like Audigy cards when it comes to MIDI interface, despite the fact the audio is perfect. Although I am still not sure nothing could be done as a workaround in order to get MIDI worked on OEL-5.3, the fact is that SB Audigy MIDI works like Roland Synth, sounding amazingly, if the kernel 2.6.18-128.1.1.0.1.el5 is recompiled with the actual alsa driver version 1.0.19 (modules snd-emu10k1, snd-emu10k1-synth, etc).
It's interesting that overall device and loaded-modules schema's picture is the same as with old alsa (original kernel). That's why I still think something could be done, at least as workaround, to get MIDI worked with original OEL-5.3 kernel.
NJ

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Looking for Print Server for HP Photosmart C4483 All-in-One Printer

I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

Hello Merole
As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
On the View tab, in the Color/Grayscale group, click Black and White.
On the Black and White tab, in the Change Selected Object group, click the settings that you want.
I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Looking for a for an all-in-one printer that is compatible with greeting card programs...

looking for a for an all-in-one printer that is compatible with greeting card programs...my original one was an HP PSC 1510...replaced it with a Deskjet 1050 & it does not work...any suggestions?

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

Looking for a new all in one printer

Our m2727 all in one printer has died. It had a pretty good run so we are looking for another HP.
This printer gets a pretty good workout.
Any suggestions? B&W. Must have scan and fax capability. Need something reliable obviously.
thanks!

ChrisPbass,
I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
1 (888) 999-4747.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Looking for an All-In-One Printer Rec. with Mac

Hello,
I'm looking for a Color Laser All-In-One printer, with ADF and Networking capability for under $600. Any recommendations of printers that work well with Mac? I know the HP's are good, but my concern is with their software. I've had nightmare experiences with them.
Thanks!

Bought the HP Color LaserJet 1312nfi for 399.99.

TS4212 can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. I have been looking for over a week now   and even chatted with the USA but cannot get it to work

can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected.   what do I do
I have been looking for over a week now   and even chatted with the USA but cannot get it to work.
I am really struggling

Thanks
someone named Eloisa   she gave me   a phone no.   or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand

Are there new updates for camera raw for Lightroom 4, or only for Lightroom 5, as in 5.3 ?

Are there new updates for camera raw for Lightroom 4, or only for Lightroom 5, as in 5.3 ?

There will be no further camera support updates for Lightroom 4 beyond what is already listed in this table.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Only current versions of Lightroom (currently Lightroom 5.3) will have further camera support added.
If you need to work with Raw files from new cameras you'll either have to upgrade to Lightroom 5 or join the Photoshop Photography Program (to get PC CC + LR5 + extras) or convert to DNG using Adobe's free DNG converter.

I recently purchased a Mac mini with the Yosemite operating system, but I cannot find a driver that works for a canon MP 450 all in one printer.

I need a driver for a Canon MP 450 all in one printer to be used with a Mac mini with the Yosemite operating system.
Canon does not have a driver. Third party providers drivers do not work with "Yosemite."
Any suggestions?

Canon does seem to have a driver.... http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp450#DriversAndSoftware

ADF and MSSQL 2005 problems - FOR UPDATE clause allowed only for DECLARE C

Hi all.
I have a legacy application which uses MS SQL server 2000 / 2005. I've started to build up a new version of this application using JDev + ADF stack.
Everything went ok until I've tried to update some data in a Form. I'm getting this error:
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR
Can someone figure out what's wrong?
1) In a MSSQL server connection string, normally we define the 'SelectMethod' parameter to 'cursor', as follows: jdbc:sqlserver://$host$:$port$;databaseName=dbserver;SelectMethod=cursor
Since I was not able to do this through my project's 'Application Resources > Connections' screen, I could not evaluate if this is the cause
2) I'm trying to follow the steps of an Oracle tutorial (http://www.oracle.com/technology/obe/obe11jdev/ps1/ria_application/developriaapplication_long.htm#ad), of course using MS SQL server instead of Oracle, and using some master->detail tables like the example suggests (in the tutorial, I've reached the step 11, then tried to update a record, which causes the mentioned exception)
Follows the stacktrace:
<Utils><buildFacesMessage> ADF: Adding the following JSF error message: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR.
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: FOR UPDATE clause allowed only for DECLARE CURSOR.
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.getMoreResults(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerStatement.seekToOutParams(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.getPrepStmtHandle(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doPrepExec(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelectForAltKey(BaseSQLBuilderImpl.java:707)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:546)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:7789)
Regards,
Luciano S. Lorencini, SCJP, SCWCD

So, I`ve created a test project and use the MSSQL flavor to create my Business Components.
After repeated all the steps, the error did not happen again.
But some strange behavior happen: I change some data and click the "Submit" button. The changed data appears ok in screen, but the changes were not committed in database!
Do I need to explicitly tell ADF to commit that changes somewhere?
Greetings,
Luciano S. Lorencini, SCJP, SCWCD

Driver for HP 6110 All in One Printer for MAC OS X 10.6.8

Your Search: Is the driver for HP 6110 All in One Printer the same for MAC OS X 10.6 as for MAC OS X 10.6.8?

Hi JCWG. To answer your question, Yes the driver is the same. Do you have questions about the install? Just in case you need it, here is the link to take you to the download of the software and drivers. http://goo.gl/njt723;
If you have any other questions, please feel free to write back
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
please help
saleem

Hello Saleem,
Welcome to the Forums
I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
HP Officejet 4610 All-in-One Printer Drivers
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Looking for HP Basic Driver only for hp 2610 all-in-one printer

Similar Messages

Maybe you are looking for