Looking for hp dv9810us vista 64 bit recovery disk. can anyone help please?
I have searched my product for the recovery disks and HP should actually have them. But on the support/software page for my laptop they did not have the link. I also have a dv2 which is much older and was able to order the recovery disks. I am in serious need of the HP Pavilion Dv9810us Vista Home Premium 64 bit recovery disks if anyone can help.
I dont understand something else either. The dv2 that I own also had upgrading to windows7 drivers and such on the product support page for my dv2. Odd that this dual core laptop that is much more advanced does not.
DV9810us came with Vista 32bit I believe.I have the smaller 14.1" version(dv2810us) and it came with 32bit. Recovery Media is listed under Vista 32bit drivers/software:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3689...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Similar Messages
-
I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal. -
My 3g phone is in recovery mode can anyone help please
Hi All, I bought a 3g Iphone, connected to my ITunes and now in recovery mode, cant get out of it. Please help
thank you1. Disconnect phone from iTunes, leaving the cable plugged into the USB port ON THE COMPUTER (not an external hub or keyboard port
2. Press the home button and while pressing, plug the dock end of the cable into the phone, and continure pressing the home button until iTunes detects the phone in recovery mode;
3. Follow the prompts to restore.
If the above sequence doesn't work, try this:
1. Start iTunes and plug in phone
2. Press BOTH home and on/off buttons for at least 10 seconds until the Apple logo appears, then continue pressing the home button alone until iTunes detects the phone in Recovery Mode, and follow the prompts to restore. -
No audio for full screen on iTunes 11.1.1. can anyone help please?
just updated to i tunes 11.1.1. the design was a bad enough of a surprise. but more importantly, if i try to play videos in full screen,the audio vanishes.
can anyone help please? anyone having the same problem? cheersThat was an issue that lots of people were having with 11.1 (including myself). I thought this update would fix that, but alas, no.
Although I did discover that the Surround channel (if a movie has it) DOES work in full screen... just not the regular Stereo audio. -
I'm 67 yrs. old.I live in the U.K. I want to use my credit in i-tunes to find the Yoga Studio app. for my MacBook Air laptop.All I can find are apps. for i-phones,i-pads and i-pods.Can anyone help please.
Apps for OSX aren't in iTunes: they are in the App Store in your Applications folder. The payment method is the one registered in iTunes. There's no app actually called Yoga Studio, though there are several Yoga apps. There is an iOS app called Yoga Studio but it appears to have no OSX equivalent, though I haven't done a detailed search.
-
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. what do I do
I have been looking for over a week now and even chatted with the USA but cannot get it to work.
I am really strugglingThanks
someone named Eloisa she gave me a phone no. or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand -
I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?
I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
Hope that helps get some on the right path to resolving their issues! -
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
When I try and download an app, I get a message "MZCommerce.CreditBalanceMismatch.Mobile_message". This is even for free apps, and I do have plenty of credit. Can anyone help please?
With a standard account you need a valid payment method even for free apps.
From the message it sound like there is something wrong with your account or some of the information you entered in the account is not correct.. Verify that the information is correct and then if still problem contact iTunes.
Contact iTunes -
I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?
ebony --
So, when you open your main Applications folder, there is no Office app there?
It's in your Users>Applications folder? -
IPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?
iPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?
While we all have MacBooks in this forum not all of us use iPhoto. There's an iPhoto Support Community where everybody uses iPhoto. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/iphoto
-
I just got an iPhone 4S model number MD439LL/A still have the box that it came in along with other info. I can not find Siri. I have looked in settings>general and settings>general>restrictions. Can anyone help me out?
That model is an iPhone 4, not a 4S.
http://support.apple.com/kb/HT3939 -
my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?
Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.
-
i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?
Would this matter then? can you not update the 3g to the lastest software?
Maybe you are looking for
-
MFP 177 wireless printing not work on win8.1
Hi, Just bought a HP color Laserjet MFP177 4 in one printer. After installation (and many attempts) i am failng to print from my PC. However it did print the test page at the time of installation and scanning function is working fine. Please help
-
Can I have two Domain in one network?
I have two Server in my office in same network. Server A is Active Directory / Domain Server. Certain user join domain and connect to this server. Server B is File Server. The other user just use Workgroup. But now this server want to Up Domain to be
-
Any way to get music from ipod back into library after hard drive crash?
I just survived and am recovering from a hard drive crash. For some reason, on my backup, I only retained about 500 of my 2500 songs in my library. All of my music is intact on the ipod however. Is there any way at all to resolve this issue and get t
-
Tried to download audio book from itunes. Already paid for with gift certificate. Partially downloaded. Says "waitin" has for last 18 hours. Cannot get into itunes app....nothing happens or changes. How to fix problem?
-
Undeploying a Web application using a Java method or call
Hi, I have an application running on weblogic that I want to undeploy using a Java method or call. Is there any way to do that with a weblogic specific API or something like? Thank you!