Looking for info on pymatcher for IEA

 I need to use a pymatcher for my Ironport encryption appliance (IEA) and the manual is not helpful enough.  I need to pars the To: line of a Secure Reply message, do an LDAP lookup on one of the recipients, then modify an existing xheader.  Advanced Services suggested the pymatcher, then sent me to TAC, which I expect will send me back to Adv. Services.
Thank you.

    It works great, czzz. And it's really easy to set up. Here's the steps: http://vz.to/1fYGZ72. As Elector mentioned, if it's already part of your package, like the Share Everything Plan, then all you'll need to do is turn it on in your phone. If you aren't on Share Everything, you'll get a notification the feature will be needed. You can actually add the Hotspot right through My Verizon http://bit.ly/xB4iTc. Hotspot features range from $20-$30 based on your data package so once you log in as the Account Owner or Account Manager, you'll see the Hotspot feature option in the Change Features section that matches your plan.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Similar Messages

  • Help needed by Good Samaritans for info on Drivers for RS232 / USB ports.

    Dear all,
    I would first like to thank you for taking the time to read my message.
    I would like to ask all you proffesional LV developer how difficult it
    might be to write the drivers for a bluetooth-RS232(or for a Wireless
    LAN ethernet/USB access point) device using LV. Would it be better to
    write the drivers in C++?
    I have finished the LV Basics 1&2, though we did not learn something helpfull for my case.
    Are there any usefull examples i should look at?
    The signal transmitted would have a data rate of about 0.5MBbs and the LV program would just display and store the data.
    Thanks for your help

    Bogiasac
    Couple of quick points then I will allow the LV Community to reply to the specifics.  From NI's point of view we would recommend that you use the development language that you feel most confident in, so if you are a C++ guru then use C++.  Another point, you mention that you attended the LV Basic training classes.  I conclude from your comments that you were looking for specific training (while attending did you raise this with instructor at the time?), these training classes are an introduction to the LV environment and set out the ground rules how to best develop a LV application.  Our intermediate courses go into greater detail into advanced LV features - though for some this is still not deep enough (future developments in that for LV 8.0 users soon).  If you are looking for specific training please contact our Training Co-ordinator in the UK and she will be happy to advice.
    On the Bluetooth question, LV has Bluetooth tools built in.  These can be found in the Communication palate under Bluetooth (this depends on which version of LV you have, Base or FDS). Please use these VIs to develop you Bluetooth application.  There are 9 Bluetooth examples shipped with LV, these can be found by using the “find examples” in the help menu.
    Kind regards
    Joe
    NIUK

  • IAS-39: looking for info

    Hi.
    We are looking for info regarding what type of support do SAP gives for this IAS rule.
    So far we saw that this rule is supported in the Tresurey module and we are looking to avoid implementing this module.
    thanx.
    ayal.

    Hi Ayal,
    you can find some information by using the SAP Service Marketplace.
    If you follow this link:
    https://websmp105.sap-ag.de/ias
    You will be led to the IAS/ IFRS information page.
    The information regarding IAS39 you will find within the media library.
    Kind regards
    Thomas

  • Looking for info on the msi 970 gaming .

    Looking at the msi gaming 970 as a GPU. I know about the ram issue. Looking for info about the card in general (persons perspective ). Like how does it overclock, cooling, bios updates, warranty and so on.
    My specs
    4790k-4.0
    gigabyte z97 black edition MB
    8gb gskill
    WD valaciraptor HD
    Thanks.

    Cooling: It has very good cooler (better than 780Ti which I own) so surely low temps (<70C with fans 35%~ )
    OC: It's a gamble. One can overclock better than the other
    Warranty: As far as I know, 1 year with seller and further 1 year directly with MSI
    BIOS updates: it's new card so rarely any updates right now, but there are some if something is being fixed/improved.
    Should work fine in your system, no bottleneck with i7 4790
    Just depends if you look at reference design or Gaming series.

  • HT1339 I was looking for info on restoring an iPod Touch 4th Gen. But iTunes presents the same Restore button, which when pressed, offers to update, not restore, to iOS 6.0.1. Why?

    I found this article when searching for info on restoring (to factory conditions) an iPod Touch 4th Generation. Now I thought this shipped with iOS 5.x (x unknown). But as mentioned too briefly in the header, when I click 'Restore' in iTunes, it offers not to restore, but to update. That is not what I want. I need to use this iPod Touch with Xcode 4.2 under Snow Leopard.
    So the question is: what is really going on here and why? Is it really true that 4th G iPod Touches ship with 6.0.1 instead of 5.x? If not, how can I get it to really go back to the original? Why is iTunes failing to offer a restore when I press 'Restore'? If I guessed wrong about which of my several machines running iTunes (some under Windows7, one under Snow Leopard)I used when I upgraded to iOS 6.0.1, would that explain iTune's failure to offer a true Restore?

    Restore will not replace an old iOS level. It will update the iOS level to the latest level. If you have to restore youre iPod that is what will happen. The iOS is not a part of a backup.

  • I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

    I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

    You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
    There is some info on these pages :
    developer site : https://developer.apple.com
    developing for iOS 7 : https://developer.apple.com/ios7/
    developer support : https://developer.apple.com/support/
    developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

  • What is my info web page for security

    When I go to sighn in I am getting a message to go to My Info web site for security information.  What is this?

    Siri uses it, so for example, if you asked how to get home, it would look up your home address from your contact. Since you can also store relationships in contacts, if you said "text my mom, wife, etc." it would know who that is.

  • When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year.  Why is this and how can I look up the year?

    When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year.  Why is this and how can I look up the year? 

    Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
    To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

  • Has anyone received this request for info?

    I received this request for info at 5:30 am this morning. It doesn't look legitimate.

    Richard Reid1 wrote:
    Thanks, mende1.
    I did not reply at all. Now and then, these bogus messages show up in Mail with the purpose of gaining access to accounts. I hope everyone will avoid this and all other spam.
    Yeah, these emails have been around for many years. The old rule applies. If a company you deal with wats information, they will firstly address you by name and secondly tell you to go to the appropriate website, sign in and apply the information there. Never follow a link they give. Never reply to the email. Never bounce the email. Trash the email. They are very easy to spot.
    Cheers
    Pete

  • REPORT FOR INFO TYPE 586

    Hi All
    I am trying to create a report for INFO TYPE 586  in HR ABAP,where  in a table apporx 30 investment codes , proposed investment and actual amount are apperaring .
    Now My problem is,  I do not want to use IF .... ENDIF statment. Is there any other way to write the code .
    Please Help.
    Thanks in advance.

    Hi,
    In this situation you can use field-symbols and/or a internal table. Like this:
    tables: pa0586.
    field-symbols: <ff1> type any,
                   <ff2> type any,
                   <ff3> type any.
    data: w_campo1(30),
          w_campo2(30),
          w_campo3(30),
    data: w_nx(2) type n.
    data: begin of i_myitc occurs,
            itc like pa0586-itc01,
            dsc(30),
          end of i_myitc.
    * fixed selection or may be from a z table
    i_myitc-itc = '01'. i_myitc-dsc = 'AAAAA'. append i_myitc.
    i_myitc-itc = '02'. i_myitc-dsc = 'BBBBB'. append i_myitc.
    i_myitc-itc = '03'. i_myitc-dsc = 'CCCCC'. append i_myitc.
    select single * from pa0586.
    do 30 times.
       w_nx = sy-index.
       concatenate 'PA0586-ITC' w_nx into w_campo1.
       concatenate 'PA0586-PIN' w_nx into w_campo2.
       concatenate 'PA0586-AIN' w_nx into w_campo3.
       assign (w_campo1) to <ff1>.
       assign (w_campo2) to <ff2>.
       assign (w_campo3) to <ff3>.
       read table i_myitc with key itc = <ff1>.
       write: / <ff1>, <ff2>, <ff3>, i_myitc-dsc.
    enddo.
    Best regards,
    Leandro Mengue

  • So when I installed the most recent updates for microsoft office 2011 for mac, my ical info disappeared.  Still have the info on my Office calendar but it's no longer on ical.  It's also been removed from my phone.  How can I get outlook to sync with ical

    When I installed the recent updates for Microsoft Office 2011 for Mac, my iCal calendar was wiped out, as was the calendar on my iPhone.  I'd rather use iCal than Office and was attempting to phase Office out altogether.  Now, all of my information is on the Office calendar but not iCal.  The iCloud version of my iCal calendar is not up to date.  In any event, I couldn't figure out how to send that info to the iCal on my mac or my phone.  How can I sync my Office calendar info to iCal?  If that's not possible, how can I get my Office calendar to sync with my iPhone?  All of my sync services are set up in iTunes and on my phone.  This happened to me once before and I spent hours on the phone with Apple and on the web trying to work it out.  I NEED MY CALENDAR!!!! PLEASE HELP!!!!!

    As that's not an Apple product, you may get more help by using Microsoft's Office for Mac forums:
    Office for Mac forums
    The other concern I have is that Office 2011 requires an Intel-based Mac and you posted in the older iMac (pre-Intel or "PPC") forums. If you have an Intel-based iMac (Apple menu > About this Mac..." will say "Intel" if you do) then I think you'll get faster and more accurate ansers to other questiosn in the Apple forums for newer iMacs here:
    iMac (Intel)

  • How can I change the time of photos in info in iPhoto for iOS. I've done it in iPhoto for Mac but when I sync to my ipad the info field goes back to the camera time ignoring "modify original files" in iPhoto for Mac?

    I used "adjust date and time" and"modify original files" to correct the time of photos taken on a camera used in Peru which was set to UK rather than local time. which is 6 hours  behind. This was to bring them into line with shots taken with other cameras set to local time. This was using iphoto 08 on a Mac. I then synced to my iPad. The photos stayed in the correct order in photos but in iphoto (iOS version) the original dates appear (the camera dates) and so the photos are out of chronological order again. This looks like a bug but is there a fix?

    don't know what you mean by "write to master" but speculate that it means modify the original times, in which case the taken times on the camera should no longer be present
    No,I meant your using the option "modify original files" will do exactly that - change the capture date original master files stored in the iPhoto library. Only when you do that, the "date modified" of your original files will be changed as well, and it will now be the date of your manipulation of the capture date.
    Oh - I hadnt considered that possibility - but of that were the case, why don't my manipulated photos go to the end of the sequence as I have done all the manipulation after the end of the holiday??
    In photos the synced album maintains the chronological order which I set up on the mac by modifying the originals, as you said,
    That is what the linked article is describing: "some apps may sort your photos in the order you specify in the app (such as iPhoto or Aperture"
    The problem I have is that, in the album, iphoto (ipad) sorts them differently to both iphoto (Mac) and the photos tab on the ipad
    In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
    "on ipad this is the Photos tab" - but this displays as per the original sequence ignoring time adjustments - the manipulations seem to be ignored (but are reflected in the album in the photos tab) and the photos tahat have been modified stay in their original positiom - they don't get put the end
    Because the library uses a different date - the date modified - the date of the last time the file has been changed in any way - any editing you do to your image, including adjust date and time will change the "date modified"
    This may change the sorting of the database but it appears not to influence the order in the albums
    In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
    So how can i get my photos in date and time order in an album in iphoto for ipad?
    Thanks for your help

  • Looking for a 12v charger for the 13" macbook pro

    looking for a 12v charger for the 13" macbook pro

    There are a number of 12V chargers available for the MBP but I prefer to use a 12V Inverter which allows me to use the provided chargers for my laptops and IOS devices both in-car and whilst out sailing.

  • Looking for a PDF app for iPad

    Hi,
    I'm sure I'm not the only one who's thought of this so I'm a believer that someone has created an app to help me and I can't find it!
    Pretty much, I'm looking for an app that will allow me to edit PDF's on my ipad and then send it (Via WiFi or Bluetooth) to my laptop.
    For example:
    Drawing a graph on my ipad, with detailed information, sending that to my macbook and then adding/inserting it to my PDF file on my laptop
    (Like getting a notification on my mac, loading it, draging it to my pdf, and vola!)
    If there is such a thing can someone help me out (If not feel free to take my idea and makes some money off of it, just let me know that you did!)
    Thanks

    Hey there
    "pdf creator" for iPad works flawlessly for me working with pdf files
    It takes care of all my needs
    I'm not sure about sending via Wifi or Bluetooth but I send them via e- mail all the time
    Possibly it could handle your needs as well
    Just type it into the App Store search field and the first one that comes up is the one I use
    Jump on over there and read up on it before buying and see if it will help you 
    Hope this helps
    Regards

  • Looking for a free app for secure note taking with search feature (unlimited)

    Hi dudes,
    As the topic suggests, I'm looking for a free app for secure note taking with search feature without any restriction on the number of notes or any other major restriction. I already use HiDisk (which lacks search feature), and security note+ (which has limitation on the number of notes). I also have used My Disk which its search feature doesn't work correctly (it's buggy).
    Thank you.

    One named NotePad is free, saves as .txt files.
    Another, WriterRoom, costs $1.99USD, and saves as .txt and .doc files.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for