Looking for info on "test wlan dot1x radius" command

Is there a way to perform RADIUS connectivity and optionally basic auth testing, without a client?
I see the "test wlan dot1x radius" command in the CLI which looks promising, but I can't find any info on it.
The "test ..." commands aren't in the Command Reference (?!)
Can anyone provide any info on how the above command works (if at all)
Thanks in advance

For testing radius, I use NTRadPing. Might be a better option for you.
http://www.novell.com/coolsolutions/tools/14377.html
Sent from Cisco Technical Support iPhone App

Similar Messages

Looking for a Software/Test Engineer position

Hello, I am looking for a Software/Test Engineer position in London or abroad.
I worked on several projects with Labview and National Instruments hardware (Acquisition and Generator cards).
Please refer to my CV and my LinkedIn profile for additional information.
uk.linkedin.com/pub/jean-félix-majurel/5a/223/a14/
Don't hesitate to contact me for an opportunity.
Best regards,
Jean-Félix Majurel
Attachments:
CV.pdf ‏316 KB

Hello DocJ,
We are located far north of Chicago in Gurnee, IL and are accepting resumes for a LabVIEW position. Please send your resume to [email protected]
Thanks

I am looking for a load testing tool for my flex application

I am looking for a load testing tool for my flex application having a limited budghet of 1000-1500$. I have gone through NEOLoad,WebUiLoad all are very expensive.

Do you have iPad 1 or 2?
You can connect iPad 1 via a VGA adapter to any projector with a VGA input (all projectors have this).
You can connect iPad 2 via VGA or HDMI.
I like Epson or Sony for projectors.

Looking for SAP TAO testing process

hi all.
looking for sap tao testing details
like software etc
links
integration
Regards
Parameshwar

hi
I think you will have to float a invitation to consulting companies to do this assignment for you.
Regards
sameer

IAS-39: looking for info

Hi.
We are looking for info regarding what type of support do SAP gives for this IAS rule.
So far we saw that this rule is supported in the Tresurey module and we are looking to avoid implementing this module.
thanx.
ayal.

Hi Ayal,
you can find some information by using the SAP Service Marketplace.
If you follow this link:
https://websmp105.sap-ag.de/ias
You will be led to the IAS/ IFRS information page.
The information regarding IAS39 you will find within the media library.
Kind regards
Thomas

Looking for info on the msi 970 gaming .

Looking at the msi gaming 970 as a GPU. I know about the ram issue. Looking for info about the card in general (persons perspective ). Like how does it overclock, cooling, bios updates, warranty and so on.
My specs
4790k-4.0
gigabyte z97 black edition MB
8gb gskill
WD valaciraptor HD
Thanks.

Cooling: It has very good cooler (better than 780Ti which I own) so surely low temps (<70C with fans 35%~ )
OC: It's a gamble. One can overclock better than the other
Warranty: As far as I know, 1 year with seller and further 1 year directly with MSI
BIOS updates: it's new card so rarely any updates right now, but there are some if something is being fixed/improved.
Should work fine in your system, no bottleneck with i7 4790
Just depends if you look at reference design or Gaming series.

Looking for Info on MSI G31M3-F

I'm looking for anyone who's using a G31M3-F. It seems like a great budget board for someone who wants to reused DDR2 mem and a Pent. D processor, but there's virtually no info on it. Is it good for OC? How long has it been out? I can only find 4 reviews from newegg. I don't do a lot of gaming but do place WoW from time to time. The X3100 should handle that just fine.
The one question I have is that I've heard that if you ever plan to put a descrete video card into a Mobo, you should never get one with an IGP. Is there any truth to that?

Hello LoopFree,
Quote
but there's virtually no info on it.
What kind of info are you looking for? For board specifications and processor & memory support information you can look at the product site(s):
G31M3-F
--> http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1470
G31M3-F (FSB 1600)
--> http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1590
G31M3-F V2 (3 Audio Ports)
--> http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1573
G31M3-F V2 (6 Audio Ports)
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1574
Note that not all Pentium D models are supported on all G31M3-F boards and that you will need DDR2-667 or DDR2-800 modules. DDR2-533 (and lower) modules are not supported.
Quote
How long has it been out?
Not sure, first or second quarter of 2008 if I am not mistaken. The earliest official BIOS Releases are from March 2008.
Quote
The one question I have is that I've heard that if you ever plan to put a descrete video card into a Mobo, you should never get one with an IGP. Is there any truth to that?
The mainboard should work fine if you add a stand-alone graphics card, if that is your question. Check the test reports that can be accessed via the product site(s) for tested video cards.
Quote
Is it good for OC?
To a certain extent, maybe, but as it is a budget board with a budget board BIOS, don't expect miracles.

Looking for a beta tester

I'm putting the final touches on my next app. I'd love to get another set of eyes to help me go over the app. So I'm looking for a volunteer to help me test the heck out of my app.
In return I will offer my time to help either the same person with their app (testing, not writing) or the app of someone else. Kind of a Pay-It-Forward idea.
So if you are seriously interested and have the time this week or next to help me out please contact me at:
rmaddy followed by the circled A then G mail company suffix.
Ideally the willing person will look for bugs as well as offer suggestions on usability, and the like.
And I'm looking for an person who does not develop iPhone apps professionally, but on their own time. No NDA required but I'd like to keep the app details between me and the other person until it's released.
Thanks.

may i?

Looking for a Performance testing tool

We want to stress test our multiserver Adobe Connect before putting into production. HP tool was not successful. Any Recommendations on tool and method?

Cameron,
Thanks for your input! Sounds like you are probably using these
products.
I saw the PerformAssure demo. Their GUI is very slick!! PerformAssure
does some cool stuff like comparing EJB metrics with system metrics
and were able to show me the EJB method that was causing a problem
with a petstore application.
I heard about this new tool from a company called Performant
(http://www.performant.com). I am signed up for a demo with these
folks. Will let you all know what I find.
I looked at Wily site and didn't persue them as they seem to be
deployable in the production environment. Our application is not live
yet, but we want to be able to make sure it can handle good load ;)
Thanks!
--N
"Cameron Purdy" <[email protected]> wrote in message news:<[email protected]>...
I haven't had a chance yet to look at Sitraka's software, but Precise
Indepth/J2EE and Wily Introscope are both pretty popular with Weblogic, and
I think they both do a good job of what they do.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"Neil" <[email protected]> wrote in message
news:[email protected]..
Hello All!
I need help! I am trying to find out which of the tools is better
suited for me to be able to do performance testing of an application
under load.
I am looking for a tool that can provide me detailed application
performance metrics. Seems like both Insight and Perform Assure can do
this job for me.
If any of you have had experience with using performance tools such as
Prescise Insight or Sitraka's Perform Assure I would appreciate any
input you might have on your usage experience of these tools.
Also if you know of any other tools that might provide similar
information such as the above tools, that would be really helpful.
Thanks a bunch!
Neil.

HT1339 I was looking for info on restoring an iPod Touch 4th Gen. But iTunes presents the same Restore button, which when pressed, offers to update, not restore, to iOS 6.0.1. Why?

I found this article when searching for info on restoring (to factory conditions) an iPod Touch 4th Generation. Now I thought this shipped with iOS 5.x (x unknown). But as mentioned too briefly in the header, when I click 'Restore' in iTunes, it offers not to restore, but to update. That is not what I want. I need to use this iPod Touch with Xcode 4.2 under Snow Leopard.
So the question is: what is really going on here and why? Is it really true that 4th G iPod Touches ship with 6.0.1 instead of 5.x? If not, how can I get it to really go back to the original? Why is iTunes failing to offer a restore when I press 'Restore'? If I guessed wrong about which of my several machines running iTunes (some under Windows7, one under Snow Leopard)I used when I upgraded to iOS 6.0.1, would that explain iTune's failure to offer a true Restore?

Restore will not replace an old iOS level. It will update the iOS level to the latest level. If you have to restore youre iPod that is what will happen. The iOS is not a part of a backup.

Looking for info model 580

i pulled this card out of a computer, its a sound blaster li've modem SB0060, looking for any information i can get on it
thanks
Message Edited by Kiaser on 09-07-2005 0:36 PM

Kiaser,
I thought that I had in the previous post, but here is some more information on it:
The card is a Li've! 5. (referred to as the Li've! Player 5. in some places).
Here is a page that links to all the information about the card you should need:
http://us.creative.com/support/kb/ar...p?l=2&sid=5805
This should include information and troubleshooting for the card.
JeremyMessage Edited by Jeremy-CL on 09-08-2005 2:45 AM

Portals best practices - looking for Info

Looking to learn on what I should and should not try to do with portals. What
sort of UI designs are encourages and what's discouraged.
Does anyone have any helpful links or book resources to recommend? Thanks.

Thanks, Sameer. I am a little past that point. I have already looked at much
of the documentation on BEA site and even threw together a few prototype portals.
Now I'm looking for portal UI guidance and recommendation. Something along the
lines of use frames or don't use frames, which attributes of a web application
make it particularly suitable or not suitable for a portlet, etc. Thanks again.
Vadim
Sameer <[email protected]> wrote:
http://edocs.bea.com/wlp/docs81/index.html - can get you started.
Vadim wrote:
Looking to learn on what I should and should not try to do with portals.What
sort of UI designs are encourages and what's discouraged.
Does anyone have any helpful links or book resources to recommend?Thanks.

Looking for info on CVE-2015-0235

Hello,
I'm looking for information on CVE--2015-0235 or GNC C Library (glibc) Remote Code Execution Vulnerability.
I would like to see if the affected program is on my servers and if so is Solaris 10 effected?
Any help would be greatly appreciated.
Thanks

We don't ship glibc with Solaris

Z10 Looking for info on warranty on an eBay bought phone

Device info
Your carrier:
Model: z10
OS Version: 10.1.0.4181
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 16GB Total space, 3.3 Free space. After removal of battery: Exact same
Did a battery pull fix your issue?
Apps installed and their version if possible.   (Go to Settings, then Options, then applications)on't believe apps shoulf have an affect on this... However, all original apps are still on the device and I have Alien Flow, BBSensors, BeBuzz Pro, Flashlight Free, HUB++, Skooday, SoundHound, Skype, Run In Crowd, Crackle, Amazon Kindle, GasBuddy, Remember the Milk, and Evolution Browser
BT device model/version (you will have to look at the BT device):?
When writing your question
Any other details that would help us out with your issue: -- I'm from Ontario, Canada.
Alright, so. I bought this phone off of eBay and it was originally with Rogers, I believe. The seller said it was unlocked and after I contacted them saying that it had Rogers information in it they paid for the unlock code so I could go with Telus, I never set anything up with Rogers. Anyways, the phone started malfunctioning around 2 months ago just been too busy to do anything about it. Malfunctioning as in.. Slow battery recharge with the original cable to the computer or to the wall connector. Also, the accelerometer appears to be broken as it no longer goes to landscape mode on any app or in the hub, youtube, etc. I've made sure the lock is not on, I've done multiple battery pulls, I've done multiple wipes of the device and started from fresh around 3 times. Okay, so now. I just recontacted the seller and they said to go to Telus but Telus doesn't have any information (warranty) on their system on the phone since it wasn't orignally bought from them, so they said to contact the original seller again and they're going to give me the original purchase info and all that paraphernalia. I was wondering, how will I go forth with a warranty from BlackBerry? If I can't go through my phone provider :s. Anyways, hopefully I explained that well enough. Thank you for your help! Also, if I'm missing something with the accelerometer please let me know! I miss youtube

Explained well enough, but unfortunately you purchased a used device, not from an authorized seller, meaning there is very likely no warranty.
All your description sounds like software faults. I'd wipe again and reload the OS.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Looking for info on Infiniband compatibility

Hello,
Posting in this forum because the Networking forum seems dead.
I've searched high and low, and I can't seem to determine whether or not the newer Mellanox HCA's such as the ConnectX-3 are compatible with Solaris. Specifically, I'm looking to integrate with Comstar and export zpool-based SRP targets. Not concerned with IP use at all, really.
I have read that the Hermon driver supports the ConnectX-2, but can't confirm it works with ConnectX-3.
Mellanox and Oracle support aren't giving me much info... Mellanox said Oracle is responsible for the drivers, Oracle sales/support sent me here since I don't currently have a support contract.
Any ideas?
Thanks!

Funny this question just came up internally and the response was to check with Mellanox on which cards work with Solaris.
I checked the Mellanox OS/support page here and Solaris 11 is not even listed:
Mellanox Technologies
I would ask them to update this page for current Solaris 11 releases.
Not a great response. I hope someone in the community can comment.
Thanks, Cindy
Message was edited by: cindys
I will find a Mellanox contact through the Solaris ISV team to see if we can get them to update their support page with current Solaris support info and to include the Connectx 3 card.

Looking for info on "test wlan dot1x radius" command

Similar Messages

Maybe you are looking for