Looking for information, please.

Salutations. Looking for some information as to what
programs, have cs4 master, or other programs that I could use to
create something like this:
http://s3.photobucket.com/albums/y88/AcomaSoulskinner/?action=view&current=Comp1-1.flv
Not sure if director would be the way to go or if there is
another program/programs I could use to create something similar.
Working on a windows platform. thanks.

This is a shockwave file, so the final product was produced
in Director. You might want to contact the author to find out how
it was produced. The original models may have been built in another
3D application and the textures that are applied to the models were
definitely produced in some other application, possibly photoshop,
or illustrator.

Similar Messages

  • Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.

    Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.

    As Bob says, any iMap service can do this. GMail can, iCLoud mail can too.
    Both of these can be used with Mail on any device.

  • II am looking for information on iPad and iPhone apps and Mac software that are "top of the line" for academic research. The most current and comprehensive information I have found is dated July 2010.

    I am looking for information on iPad and iPhone apps and Mac software that are "top of the line" for academic research. The most current and comprehensive information I have found is dated July 2010.

    PogoPossum,
    My area of interest is in business and economic history. There is a considerable amount of reading and charting. Until the iPad hit the streets, I only considered stacks of books, journals, and downloaded documents, all marked up with highlighters, underlines, and marginal notes.
    Most of my PC based work involved MS Office, Endnote, and MS OneNote.
    What I would like to do with the iPad and MacBook are the same things (Office, Endnote, OneNote) and add the ability to read and markup all forms of printed materials from books to pdf to webpages.
    I cut my teeth on an iPod Touch and have tried a lot of the note taking and reading apps. Without a camera the standard iPod Notes works for short quick notes and long think pieces. I just emailed the content and downloaded the stuff to my PC. Obviously, I do not want to continue at this "non-integrated" level of work.
    Does this help?
    Dick

  • Looking for information for DOORS integration from Prosite product

    I'm looking for information that was on the original Primavera web site that describes integration from Prosite into DOORS - I'm aware of the PMC solution but am looking for the Primavera provided solution.

    check everything you can find written by tinic uro.  this will get you started:  http://www.kaourantin.net/

  • Looking for information on best practices using Live Upgrade to patch LDOMs

    This is in Solaris 10. Relatively new to the style of patching... I have a T5240 with 4 LDOMS. A control LDOM and three clients. I have some fundamental questions I'd like help with..
    Namely:
    #1. The Client LDOMS have zones running in them. Do I need to init 0 the zone or can I just +zoneadm zone halt+ them regardless of state? I.E. if it's running a database will halting the zone essentially snapshot it or will it attempt to shut it down. Is this even a nessessary step.
    #2. What is the reccommended reboot order for the LDOMs? do I need to init 0 the client ldoms and the reboot the control ldom or can I leave the client LDOM's running and just reboot the control and then reboot the clients after the control comes up?
    #3. Oracle. it's running in several of the zones on the client LDOM's what considerations need to be made for this?
    I am sure other things will come up during the conversation but I have been looking for an hour on Oracle's site for this and the only thing I can find is old Sun Docs with broken links.
    Thanks for any help you can provide,
    pipelineadmin+*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Before you use live upgrade, or any other patching technique for Solaris, please be sure to read http://docs.oracle.com/cd/E23823_01/html/E23801/index.html which includes information on upgrading systems with non-global zones. Also, go to support.oracle.com and read Oracle Solaris Live Upgrade Information Center [ID 1364140.1]. These really are MANDATORY READING.
    For the individual questions:
    #1. During the actual maintenance you don't have to do anything to the zone - just operate it as normal. That's the purpose of the "live" in "live upgrade" - you're applying patches on a live, running system under normal operations. When you are finisihed with that process you can then reboot into the new "boot environment". This will become more clear after reading the above documents. Do as you normally would do before taking a planned outage: shut the databases down using the database commands for a graceful shutdown. A zone halt will abruptly stop the zone and is not a good idea for a database. Alternatively, if you can take application outages, you could (smoothly) shutdown the applications and then their domains, detach the zones (zoneadm detach) and then do a live upgrade. Some people like that because it makes things faster. After the live upgrade you would reboot and then zoneadm attach the zones again. The fact that the Solaris instance is running within a logical domain really is mostly besides the point with respect to this process.
    As you can see, there are a LOT of options and choices here, so it's important to read the doc. I ***strongly*** recommend you practice on a test domain so you can get used to the procedure. That's one of the benefits of virtualization: you can easily set up test environments so you cn test out procedures. Do it! :-)
    #2 First, note that you can update the domains individually at separate times, just as if they were separate physical machines. So, you could update the guest domains one week (all at once or one at a time), reboot them into the new Solaris 10 software level, and then a few weeks later (or whenever) update the control domain.
    If you had set up your T5240 in a split-bus configuration with an alternate I/O domain providing virtual I/O for the guests, you would be able to upgrade the extra I/O domain and the control domain one at a time in a rolling upgrade - without ever having to reboot the guests. That's really powerful for providing continuous availability. Since you haven't done that, the answer is that at the point you reboot the control domain the guests will lose their I/O. They don't crash, and technically you could just have them continue until the control domain comes back up at which time the I/O devices reappear. For an important application like a database I wouldn't recommend that. Instead: shutdown the guests. then reboot the control domain, then bring the guest domains back up.
    3. The fact that Oracle database is running in zones inside those domains really isn't an issue. You should study the zones administration guide to understand the operational aspects of running with zones, and make sure that the patches are compatible with the version of Oracle.
    I STRONGLY recommend reading the documents mentioned at top, and setting up a test domain to practice on. It shouldn't be hard for you to find documentation. Go to www.oracle.com and hover your mouse over "Oracle Technology Network". You'll see a window with a menu of choices, one of which is "Documentation" - click on that. From there, click on System Software, and it takes you right to the links for Solaris 10 and 11.

  • Looking for information about AS3 sound classes in "audio" wrong places?

    I'm looking for in depth information about ActionScript 3.0 sound classes. No matter where I search I continually encounter the same sort of kindergarten level descriptions, which never teach more than what we can readily glean from Adobe's documentation. Someone must know where there a discussion that really gets to the heart of the matter.
    I've read Adobe's LiveDocs on the Sound, SoundChannel, SoundMixer, SoundTransform classes. Indeed, they provided me enough guidance to create my own streaming MP3 player, with volume, pan, my own custom mono mix, http request, a preloading animation, and peak meters ...
    Here's an example (in the last statement of the following code) where I understand the end effect, but I fail to comprehend what happens at the compiler level:
    var currentSoundSource:Sound = new Sound();
    currentSoundSource.load(new URLRequest("http://www.mySite.com/myRecording.mp3"));
    var audioChannel_01:SoundChannel = new SoundChannel();
    audioChannel_01 = currentSoundSource.play();
    Unfortunately the class definitions in LiveDocs are quite terse, and they're seemingly incomplete with respect to:
         •     advice on best practices
         •     a thorough coverage of class to class interactivity
         •     a description of exactly how audio streams/plays into channels
    ... and in certain cases it appears that Adobe's descriptions are not fully accurate.*
    Regarding best practices, at first blush I'm sure everyone ponders over the fact that SoundChannel and SoundMixer have a stop method while the Sound class does not.
    One assumes that this surprising design must bear some advantages. If so,  what are they? Where are the analog sound mixer analogies? What would be the disadvantage of a sound class with a stop method ...  particularly when they have their own play method?
    Where are the discussion of these concepts? (Even if Adobe hired the wrong guy to write its sound classes, there should be some follow through that thoroughly explains the existing situation.)
    Phrankie
    * Here's an instance where the docs appear to be partially in error. (Is "and play" mistakenly included in the following?)
    "The Sound class lets you lets you create a new Sound object [and] load and play an external MP3 file into that object."
    ... uh, mmmmmm ... we play an MP3 into a sound class object?
    Wouldn't it be more accurate to say the following:
    A soundChannel can receive the audio data from a sound class object. We can play a sound object into an SoundChannel and manipulate it by altering the SoundChannel's soundTransform property, and we can stop it with the SoundChannel's stop method. 

    check everything you can find written by tinic uro.  this will get you started:  http://www.kaourantin.net/

  • Looking for information using labview and measuing Hydrogen\Oxygen duing Electrolysis tia sal2

    Greetings All
    I'm looking for any information on how to setup labview 7.1 to measure Hydrogen/Oxygen during electrolysis.  Can someone send us information on what equipment we would need.
    PS we don't have deep pockets we currently have labview 7.1 and we are testing with a usb 6008 currently.
    Thanks

    Hi sal2-
    In order to measure concentrations of these elements during processing you will first need to select an appropriate transducer.  Perhaps another user with more experience in electrolysis processing can suggest the external hardware.
    Once your transducer is properly configured you will just need to read the signals into your USB-6008 as voltage signals and scale them in software.  A great example of this is found in the NI Example Finder for LabVIEW (Help>>Find Examples) by browsing to Hardware Input and Output>>DAQmx>>Analog Measurements>>Voltage>>Cont Acq & Graph Voltage-IntClk.
    Thanks-
    Tom W
    National Instruments

  • Looking for Information structure

    Hi everyone,
    I was wondering if there is any SD information structure which includes a field with the total amount of sales order quantity.
    What I am looking for is the total amount of sales order related to a plant in a certain week.
    Thanks in advance and best regards.
    Thanks

    Hi
    I don't think there is any infostructure on the basis of Plant in the sales information system. Try difining infostrucure as a plant and for that you have to assign  the key figure as incoming orders, qty, value etc

  • Looking for information on an MSI OEM board made for Acer

    I am looking for some information on an MSI manufactured but Acer branded 780i chipset motherboard. I had an EVGA 680i chipset based board that was on the way toward dying and, not wanting to do a full upgrade currently, was able to locate and purchase a refurbished MSI 780i board. Upon receipt of this motherboard, I found out that the board is an OEM board based on the P7N Diamond (MS-7510) and manufactured for Acer. I have no idea which model Acer computer this board may've been used in.
    Does anyone know of this board or have any information on it? The number listed on the board is MS-7510B0909417034.
    Would I be able to use normal P7N Diamond bios updates with this board?
    Also, the board I purchased came with onboard sound rather than the X-Fi add-on card that came with the retail version of the P7N Diamond. Should this on-board solution work with the normal nvidia HDMI audio driver? If not, can someone tell me where to locate the driver for this onboard sound?
    Thank you for any assistance anyone may be able to provide.
    Sincerely,
    - Byron Followell

     Contact Acer. We don't support MSI OEM products supplied to outside vendors/manufacturers.
    OEM boards/products manufactured by MSI
                   Topic locked

  • Web Based Messageboard (JSP, XML, XSLT) - Just Looking For Advice Please!

    I have a general question - I am not looking for any code, just some advice if possible. I am studying on a Masters course and I have been given an assignment to do which I am having difficult getting started. I have worked a lot with Java up until now, however this is the first time I have had to JSP on my course.
    My current assignment is that I am required to create a simple web based message board, using JSP and XML, which allows users to post messages to the board, and also to reply to messages. The content of the message board is stored in an XML file, and there is no database involved. The message data needs to be formatted for viewing in a browser using XSL transformations.
    I am stuck as to how to go about starting the project, and this is all I am asking for advice in. I have created the basic XML file which has some preliminary data stored within it, and I have created an XSL stylesheet to transform this data, however I am stuck with the JSP. Do I need to create a seperate JSP page for each page of the website? How does this link in with the XSLT?
    I would welcome and really appreciate any advice, but I stress that I am not looking for anyone to give me any code or anything like that.
    Thanks.

    You can use XSLT to convert XML to HTML. Then include this HTML in your JSP. Further on you've a plain HTML form with an input field for a message which you submit to a servlet. In the servlet validate/convert/whatever this message and add it to the XML file and then forward/redirect the request back to the JSP.

  • Looking for information on the below questions on ASM

    Scenario: (Oracle 10g on Windows 2003 with EMC storage)
    ASM Partition table crashed for LUN 20 on 18th July
    DB was up and running till 23rd July (New LUN (LUN 36) was presented and the RMAN backup used to restore the data that were residing on the corrupt LUN)
    End of the day everything screwed up and the complete grid (4 nodes) was rebuild.
    Links:
    As mentioned in the link: http://www.exforsys.com/forum/oracle-database/487-what-asm-instance-oracle.html
    "The ASM instance is only involved during the creation or deletion of files and when disk configurations change (such as dropping or adding a disk). When these types
    of changes occur, the ASM instance automatically rebalanced the disks and provides the necessary information to refresh the extent map in the SGA of the database
    instance. Of course, this process requires that the ASM instance run concurrently with the database instance, and only shut down after the database instance is
    closed."
    As mentioned in the link: http://www.orafaq.com/wiki/ASM_FAQ#ASM_disk_header.2Fsuperblock_backups.3F
    "ASM disk headers (super-blocks) cannot be backed up and restored in Oracle 10g. By implication, if you use EXTERNAL REDUNDANCY and a single disk's header is
    accidentally overwritten, the entire disk group will have to be restored."
    As mentioned in the link: http://www.datadisk.co.uk/html_docs/oracle/asm.htm
    "ASM is a special instance that does not have any data files, there is only ASM instance one per server which manages all ASM files for each database. The instance
    looks after the disk groups and allows access to the ASM files. Databases access the files directly but uses the ASM instance to locate them. If the ASM instance is
    shutdown then the database will either be automatically shutdown or crash. "
    With the above scenario and the documents provided in the links above, I am unable to get the complete picture of what went wrong. Will be great if some one could
    through more light on the below questions. (Note: we have multiple vendor engaged managing different part of this outage and unable to get the real fact of what went
    wrong)
    1, The ASM had given the details of the disk to the DB, and the DB is managing the disk directly. Also the DB and the ASM instance were up and running till 23rd is
    what i understand going by the details given in the above links, in this scenario how can we confirm that the partition table is corrupt / missing. Is their a way to
    check the same?
    2, ASM disk headers (super-blocks) cannot be backed up, that means that it can not be read directly. Then is it possible to say that the ASM disk header is corrupt /
    missing?
    3, If the ASM disk header / partition table of LUN 20 is corrupt on 18th, can the DB run till 23rd without any issue? will the ASM & DB does not crash?
    4, ASM will strip the data across the available LUN's, will it not be able to rebuild the data on the newly presented LUN 36 instead of using RMAN backup to rebuild the
    data? or is the ASM not configured as it should be done. (WE have multiple LUN's presented to this Grid)
    Edited by: 880333 on Aug 19, 2011 12:35 AM

    What relation with the Oracle Forms product ?
    Francois

  • 1st generation MacBook, battery and Leopard issues; looking for help please

    I have a 1st generation MacBook that started having battery problems immediately after installing Leopard. it was the same issue many others have complained about; battery life shortened and shutting down while on battery power with no warning. I have never had that problem while using Tiger. I experienced this with both 10.5.0 and the stand alone upgrade of 10.5.1 using an erase and install method.
    (BTW, as a side note: I'm religious about calibrating my battery every month and use a program called "CoconutBattery" to document the results. Prior to Leopard, the battery measured 97-99% capacity. Three days after Leopard was installed it was time for another check, the result was 74% capacity.)
    I had a clone backup of Tiger and immediately restored my MacBook, but the problem followed Tiger. I have Applecare and called support. Both myself and the tech found it rather hard to believe that the battery just suddenly failed coincidentally after the Leopard install. We went through the regular things; SMC reset, firmware checks, diagnostics, repair permissions, etc.
    We believe it has to do with the Battery Updater package. I had gone between both versions of 1.2 and 1.3, but the problem remained with both Tiger and Leopard. The tech decided to send me a new battery (it's on the way) and I wish to try installing Leopard again. As long as I have my cloned Tiger image, all I have to lose is my time, but hopefully, not another battery! I would honestly like to get Leopard running on this machine.
    But... here's my question. In reading through these discussions in both the Leopard and MacBook forum, there doesn't seem to be any consensus of which BatteryUpdater package to use. The Apple tech honestly told me he didn't know. Also, if the BU package "writes" to the battery (which it states it does), can it be downgraded once v1.3 has been installed? I mean, should I leave the battery out, install Leopard, then manually update BU to v1.2 before installing the battery (if possible)? I do plan on testing the new battery with my Tiger install, just to verify it is working as it was before.
    There are a lot of people here claiming to be knowledgeable about Leopard, never had any problems with a variety of machines, etc, etc, so I would appreciate your input. Please don't speculate, but if you're using a version of BU that works with Leopard and your 1st Gen MacBook, I would appreciate you telling me about it. I have tried to document and methodically relate everything I've done so far, but if you need additional information, just let me know.
    I noticed Leopard had installed BU v1.3 when I checked it, so it must use that as default, since I noticed Tiger had v1.2.
    OR, am I way off base on this? Can anyone think of another reason I may have had this problem? Am I barking up the wrong tree by concentrating on the BatteryUpdater package? Is it possible all these batteries are failing under a Leopard install maybe due to some unknown reason?
    Any knowledgeable advice or suggestions are welcome, thanks!

    Well, Ding Dang y'all... it appears the battery was the culprit. I received my replacement battery from Apple and followed the same steps and everything seems to be working fine.
    It sure was strange that the battery started this problem immediately after Leopard was installed... I don't know what to say about that, unless BatteryUpdater v1.3 started the chain of events.
    In case it helps someone else, here's exactly what I did (rebooted through each step):
    - Backed up data; unauthorized computer from iTunes
    - Erase and install from the Leopard disc, while keeping the old battery in
    - Installed Leopard, did software updates except for delta 10.5.1 update
    - Applied combo update of 10.5.1 from separately downloaded file
    - Found BatteryUpdater Bundle (BU) of v1.3, moved to trash, rebooted
    - Ran software updates, BU v1.2 was found and installed
    - Then, swapped out battery to new battery
    - Tested unit, seems to be okay now, no shutdown issues, battery runtime seems normal
    Thanks to all that had advice and suggestions. It was enough to get me to try it again. Now, I have two more machines to upgrade, since these are production machines, I'll probably wait awhile. But, having this is a real treat.
    Have a great holiday everyone!

  • Looking for information...

    I am new to flex and am wondering what trends are out there that follow Flex. If you read this please take some time to let me know(as well as others) answers to questions such as......
    What kind of projects and applications are you using Flex for?
    How is your development environment set up?
    Have you come accross any limitations (wanted to produce something a certain way but ended up using a different method)?
    (Please feel free to generate your own questions simular to the following.)
    Any links or information that can be provided as to the popular trends and usibility of Flex(FROM A DEVELOPERS VIEW) would be greatly appreciated.
    If we can pool together some information of popular trends in flex, everyone will be able to understand exactly what can be done with it....
    Thanks

    This is a link to the Cisco Security AGent Test Guide:
    http://www.cisco.com/application/pdf/en/us/guest/products/ps5057/c1031/cdccont_0900aecd804f00d6.pdf
    Thanks go to John Mutuski (jmutuski) for finding it.

  • Looking for information on full modelname

    Hello.
    I'm creating SCCM Driver Packages and need the complete model name.
    If I search for drivers to, lets say M58 I get the first four numbers of the model name like this:
    ThinkCentre M58
    ThinkCentre M58 (3231)
    ThinkCentre M58 (4083)
    ThinkCentre M58 (4085)
    ThinkCentre M58 (4086)
    ThinkCentre M58 (4099)
    ThinkCentre M58 (5897)
    ETC
    But using the four first numbers is not enough! I need the complete model names to be 100% sure that I use the correct driverpackage to the correct model. The model name is supposed to look like this : 2774LFG
    Where can I find the full model name? You do have this infomation somewhere on this site i guess, but I can't find it anywhere...
    Link please
    Thanks

    toratb wrote:
    Where can I find the full model name? You do have this infomation somewhere on this site i guess, but I can't find it anywhere...
    Link please
    Thanks
    You can get the full model (type) by running this in console (DOS):
    wmic csproduct list full  for a full listing
    OR
    wmic computersystem get model  for just the model(type)
    You can then use a query in the TaskSequence Step:
    Select * from Win32_ComputerSystem where Model like ‘2445GWW’
    Cheers
    My Current Laptops: Thinkpad X1 Carbon and Thinkpad Helix

  • New look for site; please comment

    Hi there.
    My question concerns (new look)
    http://www.sincro.co.za/new-test.php
    and
    http://www.sincro.co.za
    I have changed the background from white to gray and also
    changed the
    colour of the text.
    My wife says the new look is very dull. Ignore the menu and
    other graphics,
    but just teel me what you think about the general look &
    feel. You are
    welcome to make suggestions.
    Regards,
    Deon

    Hello there,
    Now, I know it's not always easy accepting peoples feedback
    but the thing you must remember is that there must be a reason for
    saying it - it's also a lot to personal preference.
    Personaly, I wouldn't use the grey, stick with bold colors,
    for example, black or white. The menu doesn't really go with any
    other colors on the page - try to stick with different shades of
    the same color or perhaps similar colors. One thing which I really
    am not very convinced with is the gradients in the menu (when
    open), they make it look very amaturish. Also, try to combine the
    three images at the top of the page.
    I'd be more than willing to help you in whatever way (graphic
    editing, etc).
    All the best,
    Kristopher (UK).

Maybe you are looking for