Looking for installer for Jetform Design .5.1.406

We are committed to this version of the software. I am new to my position in the company and discovered that the CD case for the installer for jetform is empty. We own a legal copy of the software but can not find a copy of the installer for 5.1.406.
If anyone has any suggestions or could help us, we're quite desparate at this point.
Michael Stewart
Systems Analyst
Industry Training Authority BC
[email protected]

Page 405 in the Soundtrack Pro manual should be of help to walk you through this.
Gordon.
Trigger Music Inc.
1-800-765-4851 [North America]
http://www.triggermusic.com

Similar Messages

Oracle documentation for Installation for Oracle Grid Infrastructure

Hi
I want to install 11g Release 2 "Oracle Grid Infrastrucure" on Aix system without Cluster/RAC option. The requirement is to configure ASM on an Standalone system without any Cluster and RAC. Is there any documentation available for this installation.
I have already checked the below link which provide information on Installation for Oracle Grid Infrastructure for a Cluster.
http://download.oracle.com/docs/cd/E11882_01/install.112/e10814/toc.htm
Please let know if there is any documentation for Installation for Oracle Grid Infrastructure for a standalone system.

Hi there. Well, the installation of Grid Infrastructure would ask you that what kind of installation you want to do, single instance or cluster? If you would choose single instance installation, it would not be much different from doing any other oracle installation. The key factor to do it and why its mandatory is because from 11.2 onwards, ASM can't be managed from DBCA but from its own tool only, ASMCA and that runs from Grid Home. So I don't think that not finding the docs should be a show stopper for you. I haven't done it on AIX so I am not sure that I can be of some help about it. I have done it on OEL 5 and it didn't throw any issues for me.
HTH
Aman....

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

BPEL Designer installation for eclipse

How do I get the BPEL designer installation for eclipse, since I cou;dnt find it anywhere, I can download the installation for BPEL Process Manager but not the designer
Thanks
Rasika

that's too bad. I also have wasted some time looking for the eclipse plug in and would have preferred that approach. I've not had good experience with jDeveloper in the past, but even if those issues have been solved, eclipse is a good standard approach that oracle should support

I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

Lalalaladog where did you download CS6 from? I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

I have license for Adobe Design Std CS6 6.0 MLP .Is there any way to get the installer for this?

I have license for Adobe Design Std CS6 6.0 MLP .Is there any way to get the installer for this?

Download CS6 products
Mylenium

2012 I purchased CS6 Design & Web premium for students for WINDOWS. Now I want to buy a macbook. Can I download the installation files for MAC OS X with my licensed serial number for free?

2012 I purchased CS6 Design & Web premium for students for WINDOWS. Now I want to buy a macbook. Can I download the installation files for MAC OS X with my licensed serial number for free?

Hi There,
We would like to inform you that you have got the serial number for Mac, it would not work on Mac machine as it is OS specific.
If you wish you use a mac machine that you can swap the platform please refer the below mentioned link.
Link: Order product | Platform, language swap.
Contact support via : Contact Customer Care
Thanks,
Atul Saini

I am looking for Crystal reports arleady designed.

I am looking for Crystal reports already designed. Does anyone know where I could fine them?

Navin,
Thanks for the reply, I have another question you might be able to answer.
I have a picture field (blob field) on the same line as our Product ID field (regular data field) and i want the report to show the picture that goes with that Product ID. 50% of our products dont have pictures, so when I print the report, it currently prints large empty spaces for the Products that dont have pictures and makes the report quite long and unattractive.
I have tried to supress the field and also put the field in its own section and use a formula for supressing if the data is blank, but I get the error message that says "Can not use a BLOB field in a formula".
I need to find a way around this. Can you, or any of your experts help?
I could send you the report with some data in it if that would help.
Thanks again!
JM

In Design CS5 for installation?

Where do I download InDesign CS5 for installation?

You can download the trial version from the page linked below and activate it with an extisting serial number you have for Indesign CS5. Be sure to follow the Very Important Instructions.
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Looking for orig OS 9.2.2 installer for dual 1.25 G$

Hi,
I'm helping a friend with a dual 1.25 G4 (not FW800) and I cannot find an original installer CD for 9.2.2 that came with the computer. A generic 9.2.2 installer won't work because of a boot prom issue. If you have this cd and would be willing to dupe it and mail it to me, please email me at wrussel1-at-twcny.rr.com
Thanks in advance!
15" 2.16 macBook Pro/2gRAM Mac OS X (10.4.6)

Hi, William -
A generic 9.2.2 installer won't work...
Correct - there is none for OS 9.2.2. The last retail OS 9 Install CD is for OS 9.2.1.
...I cannot find an original installer CD for 9.2.2 that came with the computer.
There is none. The installer for OS 9.2.2 for all G4 MDD models is part of the combo disk set that came with the machine - that set boots to OSX, but has an option to install just Classic (OS 9).
One or more of these Apple KBase articles should help in using that disk set to install OS 9.2.2 (Classic) -
Article #106294 - Mac OS X: How to reinstall Mac OS 9
Article #107383 - Mac OS X 10.2, 10.3: How to perform Mac OS 9 clean installation with Restore CDs
Article #42929 - Using Restore Discs with Mac OS X 10.2 through 10.3..3
If that disk set is also missing, about the only reliable source is Apple's Customer Service - they often have replacement disks available for reasonably recent machines.
http://www.apple.com/contact/phone_contacts.html
EBay is another possibility, but be cautious - the buyer does not always receive what was sold.

Installer for a Java Program

Hello, folks.
I've written an application that I feel is ready to show to others, and would like to provide it with an installer.
I need to check that JRE 1.4 is installed, install it if it isn't, install the application to a directory, set install/uninstall options in the control panel, and add a start menu item. (This will be a Windows-platform installer.)
Could any of you suggest a free (not demo) installer system that I could use? I've heard that there are some good ones out there, but I don't have their names and associated URL's.
thanks,
Andrew

Hello All,
This is may be bit of a tangent, but hopefully it can be helpful regardless...
I'm looking into installer programs that are java friendly with the ability to generate a gui-based install program for multiple platforms. I went out and tried to find as many programs that match these specs (list below). Before I dive headlong into demo-sampling-mode - I was hoping folks would share any positive or negative experiences they've had with any of the apps listed below.
http://www.denova.com/ - DeNova
http://www.fawcette.com/Archives/premier/mgznarch/javapro/2000/06jun00/rv0006/rv30006.asp - InstallShield Java Edition 3.0
http://www.alphaworks.ibm.com/tech/beanbag - BeanBag
http://www.alphaworks.ibm.com/tech/installtoolkit - Install Toolkit for Java
http://www.jadcentral.com/codecentral/code_profile.jsp?category_ID=4&code_ID=112 - ITW Installer For Java Applications
http://www.zerog.com/ - InstallAnywhere (some free, some not)
http://www.gjt.org/info/design/autorad.shtml - AutoRad [GPL]
http://www.xenonsoft.demon.co.uk/products/freeinstaller/index.html - freeinstaller [Open Source]
http://www.izforge.com/izpack/ - IzPack [Open Source]
http://www.toolshed.com/download/installer/install.html - Java Self Installer [GPL]
http://liftoff.sourceforge.net/ - Lift-Off [GPL]
http://packlet.sourceforge.net/ - Packlet installer tool [Open Source, LGPL]
http://vainstall.sourceforge.net/ - VAInstall [GPL]
Comparisons:
http://www.zerog.com/products_pu_05.html
Cheers,
Enrique
cc comp.lang.java.softwaretools
cc forum.java.sun.com > Java Programming > Installer for a Java Program

How do I create an installer for my project that allows for variable data entry like a server unc path?

Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
Lance

Hello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

Should I use time machine, CCC or a bootable installer for OS X Yosemite

I am about to change my mid-2010 MBP and install a Samsung 850 pro. I have Yosemite (by the way: Yosemite performance is good, no slowness; hdd filled only 50%) - I have VPN Tracker and Microsoft Remote Desktop as main applications at the moment. I will also use it for itunes.
I have made a backup on time machine.
The process instructions on the net vary:
1) After replacing the HDD with the SSD, press down Command + R, this opens boot utility of Yosemite; then with disk utility format the SSD as MacOs ext journal. then: Back-up from time machine.
2) OR: Use Carbon Copy Cloner. Connect the SSD on a USB tray (I have one) and commence from there before installing. On re
3) OR: Should I first - Create a bootable installer for OS X Yosemite; the instruction says: Download the OS X Installer app from the Mac App Store. But I can't find it. And then clone as Kappy describes.
- Isn't that replaced by the Command + R startup procedure?
& I am looking for insight in this tip:
4) I read someone failed in installing an SSD because he forgot an I/F sensor connection (Temperature gauge??) ; but I see such a connector nowhere in the video's.
Of course I prefer 1), looks most straightforward as being within the Apple software mindset.
anything will help me.

First I would explore the potential problems you may face installing a third party SSD in a MBA running Yosemite. Just a sample:
http://www.zdnet.com/article/os-x-yosemite-and-third-party-ssds-heres-what-you-n eed-to-know/
The simplest way of installing a new storage device is to connect it to the MBP via USB and then format it Mac OS Extended (Journaled) in Disk Utility>Erase.
Then use CCC or Disk Utility>Restore to copy the data to the SSD from the internal HDD.
Then test to see if the external SSD will boot the MBP. If so, make the physical swap.
Ciao.

Acrobat 9 Pro - Reinstalling freezes during "Preparing for Installation..."

Hi,
I'm using an Apple MacBook Pro with Mac OS X 10.6.3 (Snow Leopard).
I have installed Adobe Creative Suite 3 Web Premium and Adobe Creative Suite 4 Design Premium.
As written in my other post (http://forums.adobe.com/thread/650516?tstart=0), I am unable to find a solution to reinstall my Adobe printer driver.
That's why I thought I might be able to just reinstall Acrobat 9 Pro completely.
However, when trying this, the installation freezes during the "Preparing for Installation..." screen.
I also tried installing in Safe Mode but without success.
I found some posts regarding this but mostly the solution is to uninstall CS4 completely and to reinstall it again from scratch. But of course I would like to fix the problem without the need to reinstall everything.
Any help is much appreciated!
Thanks!
Wolfgang

Hi Larry,
thanks for your message!
I found that out later as well, see http://forums.adobe.com/message/2857742#2857742 .
However, the problem I tried to describe in this post, is that I cannot reinstall Acrobat as it just freezes during the Installation.
Do you know any work-around for that?
Thanks,
Wolfgang

Help with installation for adobe flash player

When I try to download the flash player it states: The installer will automatically continue when these conflicting applications are closed : Internet Explorer. What should I do? Thank you.

Hi, you may want to try the manual Uninstall/Install.
Download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Close all browser windows, you only want to be looking at your Desktop.
Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
Be sure to use the Administrator Account.
Disable your Anti-Virus until Flash Player is Installed correctly
Run the Uninstaller and when finished, Reboot(restart) your computer.
Now check and make sure the Anti-Virus is still Disabled before running the Installer
Run the Installer for IE, and when finished, Reboot.
Then go to this test site and test each browser:
http://www.adobe.com/software/flash/about/
You should be able to see the Flash Player logo animate(spin) and the latest version displayed.
You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
Thanks,
eidnolb

Looking for installer for Jetform Design .5.1.406

Similar Messages

Maybe you are looking for