Looking for InvisibleShield review??

as title.
please,i have search some of the topic here and i know some nano user has been using the "InvisibleShield".
My propose is to group all the review here so that who are interesting with it can "Ask and reply" in here.
does application process very diffcult??
how about the protection,clarity of screen etc...
Thanks very much for all the review.

The Invisible Sheild review was on http://www.rainydaymagazine.com/RDM2005/GearNGadgets/September2005/RDMGG_Invisib leShieldFirstLook.htm

Similar Messages

Looking for 9ifs reviews/reports

I am looking for reviews or reports of 9ifs. I can find no mention of it in any of the Content Management sites such as AAIM.org
Thanks in advance.

Patrick,
I am the Technical Director of a company in the UK that has been using iFS and developing an application ontop of it since early 2001. You can contact me at [email protected] for more information and let me know what sort of thing you are looking for.
Regards,
Bernard Wright
Technical Director
Serengeti Systems

Looking for Code Review Resources

We have completed a complex project using jakarta struts and are in beta testing at the moment.
Would like to have someone review our code but we have not been able to find expierienced developers in our (physical) area.
Does anyone have suggestions on where I could look to find a qualified individual for independent code review.
Thank you in advance for your suggestions.

Just post it here. Some of our fine reviewers will be happy to serve you.
P.S. Be sure to say that it's homework.

Looking for a camera. . .

I was interested in the Nikon p80 but after reading some reviews Im not sure if its what I want...heard its not for people who arent experienced with anything other than point and shoot cameras.
This is what Im looking for, and reviews/advice would be helpful.
-good optical/digital zoom
-7/8+ megapixels
-big viewing screen
-efficiency in low light
-beautiful pictures
-easy to use or learn to use
-price range of about $300-$500

Hey dt4d,
Although the Nikon p80 has a more advanced capability than the average point and shoot camera, it can also be set to operate the same as any point and shoot camera would. The most significant difference between the Nikon p80 and the average point and shoot camera is the lens on the p80 has a significantly more telephoto capability, which should allow you to shoot much more distant subjects. With $300 to $500 to spend there are very few point and shoot cameras that would be outside of your price range. When deciding what to purchase my first concern is always quality of construction, because when I spend $300 to $500 I want it to last a long time. In my personal opinion the best point and shoot camera on the market right now is the Canon G10, which retails for $499.99 on BestBuy.com. With the Canon G10 you would sacrifice some of the lens reach that the Nikon p80 has, but I feel like the quality of construction of the G10 outweighs the longer focal length of the p80. The Nikon p80 is also a great camera, and with a budget of $300 to $500 there are many options for you. I would suggest going to a Best Buy® store and start trying some out. I hope this helps out!
Allan
Community Connector
Best Buy® Corporate
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

Yes I know it's free, but Im trying to find out how to download it and install, but I keep getting account review and asked for CC details as I have no CC I can't get the download or install it, any help please, what i don't understand is why would I be asked for CC details if it is a free download ?? i just want to know is there anything I can do.

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

Plug a NAS into the BT Hub that does TM. Look at Synology.
You just use the wireless of the hub.
But the cheapest solution is still the TC.

Acrobat 9, shared reviews, and looking for "Save As" option

Hello to all,
I am wondering whether you can help with an annoyance in setting up shared reviews under Acrobat 9.
Background: I first established shared reviews at my company using Acrobat 8 and our own internal WebDAV server. The setup worked, and still works, marvelously. To set up a shared review, I would select "Send for shared review", select the previously-stored server profile, request to save the file locally, give the review PDF a name, and save it. I'd then post the file to one of various locations specific to our company, and all was well.
Then the company upgraded me to Acrobat 9. Its shared-review user interface is slightly different - and contains one particularly annoying aspect. It, too, allows you to save the shared-review server address as a profile - but when you do so, you inexplicably lose the ability to choose a name or a location for the shared-review PDF. When you first set up the server, Acrobat 9 prompts you for a file name and a location - and it never does so again. Instead, any time you select the server profile, Acrobat automatically appends a "_review.pdf" suffix to the file name and saves it in the same directory as the original file. This is annoying because I almost never save the review PDFs in the same folder, and need them to have different names both in the PDF file name and on the comment server. So I really need the functionality that Acrobat 8 offered - namely, to select which file name and destination to use for the review PDF. The workaround (re-create the server profile every time) is even more annoying - we work with about 50 reviews per day, and having to retype the server address & verify it every time would get old very fast.
Does anyone know what I'd have to do to bring back Acrobat 8-style "Save As..." functionality for an existing shared-review profile in Acrobat 9?
Thanks and best regards,
--Michael

> When using Save As to save a PDF, is it possible to have Commenting and Analysis enabled for that saved PDF by default?
No.

First PKGBUILD - looking for review

Hello all,
I have created my first PKGBUILD for some new scientific computing libraries and corresponding examples related to my field. I am looking for input before submitting this to the authors for inclusion on their site (and possibly to the AUR if there ends up being more interest).
Anyway, here is what I have so far, which seems to work on my system:
PKGBUILD:
pkgname=ismrmrd-git
pkgver=20121030
pkgrel=1
pkgdesc="Libraries and examples for the proposed ISMRM Raw Data format"
url="http://ismrmrd.sourceforge.net"
arch=('any')
license=('unknown')
depends=('hdf5-fortran-cxx'
'boost-libs'
'xsd'
'xerces-c')
optdepends=('fftw: used to compile example programs'
'doxygen: only needed if you want to produce your own copy of the documentation')
makedepends=('unzip'
'git'
'cmake')
# install="${pkgname}.install"
# source=("http://www.syntax-on.com/static/$pkgname/$pkgname-$pkgver.tar.gz")
# source=("http://downloads.sourceforge.net/project/ismrmrd/src/${pkgname}_${pkgver}.zip")
source=("cmakelists.diff")
noextract=("${pkgname}_${pkgver}.zip")
md5sums=("9ec7ed899e488961826fa41da7109a84")
_gitroot="git://git.code.sf.net/p/ismrmrd/code"
_gitname="ismrmrd"
build() {
cd "${srcdir}"
# unzip ${pkgname}_${pkgver}.zip -d ${pkgname}-${pkgver}
msg "Connecting to GIT server..."
if [ -d $_gitname ] ; then
cd $_gitname && git pull origin
msg "Local files have been updated"
else
git clone $_gitroot "${srcdir}/$_gitname"
fi
msg "Received code from GIT or server timed out"
# stop CMakeLists.txt appending an unwanted dir to the CMAKE_INSTALL_PREFIX
# also prevent install of /usr/cmake/FindIsmrmrd.cmake
msg "Patching CMakeLists.txt to comply with Arch Packaging Standards..."
cd "${srcdir}/${_gitname}"
patch < ${startdir}/cmakelists.diff --forward
# start the build
mkdir "${srcdir}/${_gitname}/build" -p
cd "${srcdir}/${_gitname}/build"
msg "Starting cmake..."
cmake -DCMAKE_INSTALL_PREFIX=/usr ../
msg "Starting make..."
make
package() {
cd "${srcdir}/${_gitname}/build"
make DESTDIR="${pkgdir}/" install
cmakelists.diff
--- src/ismrmrd-latest/CMakeLists.txt 2012-10-30 11:48:03.332945241 -0500
+++ src/ismrmrd-latest/CMakeLists_mod.txt 2012-10-30 11:48:27.619612710 -0500
@@ -10,7 +10,7 @@
endif (WIN32)
-set(CMAKE_INSTALL_PREFIX ${CMAKE_INSTALL_PREFIX}/ismrmrd)
+# set(CMAKE_INSTALL_PREFIX ${CMAKE_INSTALL_PREFIX}/ismrmrd)
list(APPEND CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
find_package(XSD REQUIRED)
@@ -69,7 +69,7 @@
INSTALL(FILES ismrmrd.h ${XSDS_SOURCES} ismrmrd_hdf5.h ismrmrd_hdf5_datatypes.h ismrmrd_export.h DESTINATION include)
INSTALL(FILES schema/ismrmrd.xsd DESTINATION schema)
-INSTALL(FILES cmake/FindIsmrmrd.cmake DESTINATION cmake)
+# INSTALL(FILES cmake/FindIsmrmrd.cmake DESTINATION cmake)
INSTALL(TARGETS ismrmrd DESTINATION lib)
INSTALL(TARGETS ismrmrd_xsd DESTINATION lib)
I'm not using any .install file, is this something big I am missing? Again, this is my first time writing a PKGBUILD, so I appreciate any feedback. Thanks!

Thanks - I will take note for future packages, or if I end up using a non-git version. makepkg seemed to not be able to handle the zip file itself, though. If I re-hosted the source myself in a tarball it worked, but on the authors' site I could only find it as a zip.
My main question is still about installation location, though. This typically installs itself in:
/usr/local/ismrmrd/bin
/usr/local/ismrmrd/lib
/usr/local/ismrmrd/include
/usr/local/ismrmrd/schema
/usr/local/ismrmrd/cmake
I was able to change this to:
/usr/bin
/usr/lib
/usr/include
/usr/schema
Obviously this prevents cmake/FindIsmrmrd.cmake from being installed at all (not sure this is OK or desirable), It also creates the /usr/schema directory, which I don't think is really standard. Where should I put such files? Should I instead install the whole package into /usr/opt/ismrmrd? It doesn't seem big enough to warrant that, but I don't know where else to put the schema and cmake directories and the associated files. Maybe in /usr/share?
Last edited by aganders3 (2012-11-07 20:20:40)

I'm looking for iPad backup to windows software reviews

I'm looking for software that will run on windows that will backup/restore reliably :
iPad2 / iPhone 5
1. apps.
2. photoes / movies.
3. Settings.
4. Documents.
5. Contacts
6. iBooks
Thank you,
Docfxit

I realize iTunes is available for partial backups.
I do sync with iTunes. I don't like iTunes.
1. I have 4 different devices I need to backup up. iTunes lets you have one account sync'ed to one PC.
2. iTunes doesn't backup everything.
3. iTunes fails sometimes and you loose what you have sync'ed. I would like backup software that is more reliable.
Thanks,
Docfxit

Looking for a notetaking app that syncs with PC

I use playbook for mobility but PC for work. I am looking for a (simple) note taking app that will allow me to sync with PC - preferably via dropbox. I used to use cintanotes on PC but that doesn't sync to PB. Looked at Evernote but seems bloated and some adverse reviews. Some others exist by seem to have issues also - eg Simplenotes. Anyone out there found a good working solution?
Solved!
Go to Solution.

One named NotePad is free, saves as .txt files.
Another, WriterRoom, costs $1.99USD, and saves as .txt and .doc files.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to look for duplicate process instances?

In Oracle BPM 11g, is there a good way to look for duplicate process instances based on process data attributes? For example, I have entered an instance of a process for 'John Smith' with a date of '4/1/2010' and I want to see if there is another instance in the same process with these same data values to evaluate as a potential duplicate. I believe we can write a java service to invoke the API to do this, but I am wondering if there is a better way within the process design to do this (XPath extension functions or soemthing?). It seems like this would be a common need.

I am really looking for an approach to looking for duplicate instances within my process flow, not from EM. So, if the user starts a new instance of a process, I can check for another instance that appears to be a duplicate and direct the flow to a human activity to review the potential duplicate and make a decision as to whether to continue processing the new instance or reject it. My guess is that we need to us a service task to invoke java code which uses the API to investigate other instances with the same values. But, I was hoping for a simpler solution....I have to think that this is not too uncommon.

Looking for Lion compatible All-in-One printer

Looking for MacBook Pro Lion compatible All-in-One color printer for my Mom who is 77 and on a limited income when it comes to purchasing ink. Preferred options include wi-fi, auto duplex, memory card slots, easy to operate. I was leaning toward a Kodak printer but majority of reviews indicate when any one of the ink cartridges is empty no more print jobs will process until the empty cartridge is replaced. In addition, folks indicate even though ink is less expensive, replacemnet is more frequent indicating that perhaps the cartridge capacity is smaller in size. Both are deal breakers. Canon PIXMA MX892 Wireless and the HP Envy series both appear impressive but I am confused regarding compatibility with Lion. Appreciate experienced recommendations, Thanks

ChrisPbass,
I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
1 (888) 999-4747.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Looking for help in making my computer good enough to play games

I bought a computer from Best Buy right after Christmas. It's a HPE-410y. I'm pretty happy with it in terms of speed and ease of use. I'm glad to be finally done with freaking Vista and blue screens of death.
Anyho, a buddy of mine wants me to play Bad Company 2 with him. I don't know much about the game other than its a shooter. However, I did read in the editoral review that the ATI 5570 my computer came with is weak. Also, 300Watt power supply needs to be upgraded as well? Do you think a graphics card/power supply upgrade is all I need? hmmm
I have glanced at the graphics cards at Best Buy when I've been up there, but not exactly sure what will work, what is good. Looking for any advice and help on what I should possible buy to get this computer good enough to play games. I wanna do this maybe the end of next month. My budget is 450 bucks. I don't need to pay to have any upgrades I decide to get installed, my brother can help me do that. I just need help in what to buy.
Thanks for any feedback.

Agreed that it's an above average computer. If you still want to do the upgrade:
http://www.bestbuy.com/site/Corsair+-+Gaming+Series+700-Watt+ATX+CPU+Power+Supply/1073697.p?id=12182...
http://www.bestbuy.com/site/PNY+-+NVIDIA+GeForce+GTX+570+1.25GB+GDDR5+PCI+Express+2.0+Graphics+Card/...
Coming right at your budgeted $450.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Looking for a Rewind like app for Tiger

Back when I had my Performa 6360 running OS 8.1, I bought a utility called Rewind from Power on Software. The app could restore my Mac to an earlier date, or restore any file that had been deleted from the trash,etc.. It was more poweful than the similiar features found in TTP, and Norton.
Does such a utility exist for OSX? Rewind failed (and why Power on is trying to hide any indication that it ever existed) for a number of reasons. For one the utility slowed down my Mac by 50%, and for two the utility created huge archives, and often corrupted its restore rescue soft boot image.
I know such a utility may not be as essential in OSX as in the earlier OS. That os would often crash for one. My ibook has crashed no more than 20 times in the 10 months I have owned it. My Performa crashed that many times in 1 month alone.
John

You wrote: "But I am afraid that Retrospect is not the same as Rewind, or Norton Go Back for Windows."True. However, since you have Retrospect, if you're using Backup Sets for backup, you can Restore a disk for which there is a Backup Set to any point in time for which a backup session exists.
Perhaps the reason there is no Rewind or Go Back for Mac OS X is because it is far more stable than Windows, as you note.
Next time you're looking for solutions, I recommend searching MacUpdate or Version Tracker. The user-submitted reviews accompanying the listings are helpful in sorting the wheat from the chaff. Both commercial and shareware/freeware solutions list on those sites and you'll generally find an answer faster than posting here.
You wrote: "Therefore I have come to the conclusion that this is yet another limitation of owning a Mac...No question my XP box has many advantages, but its also quite obvious that OSX is far more stable and secure than XP."Only you can decide for yourself which platform fits your needs best.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Looking for a viable docking station for dv7t.

Looking for a viable alternative to the port replicators listed on the HPShopping website for a Dv7t. The reviews of those are horrible. There must be a better alternative.

Maybe This will help
http://www.amazon.com/XtremeMac-Incharge-Charging-iPhone-Black/dp/B005F0MA9O

Looking for InvisibleShield review??

Similar Messages

Maybe you are looking for