Looking for Labview/ Labwindows developer in Chennai

Hi,
We are looking for an experinced developer in Labview/ Labwindows
Thanks,
[email protected]

hi,
i having experience on labview 1+ year (16 months) currently working in Delhi,
my email: [email protected]
regards,
Balaji DP

Similar Messages

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

Looking for labview training

Hi
i m looking for labview training with less cost in delhi or online training
Arul

we do provide labview training
please check www.jambhekar.com
my contact details
cell 9970168164
mail [email protected]
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

Look for LabVIEW part time programming

Hi,
I am available for part time LabVIEW programming. Areaingapore.
Certified LabVIEW Developer.
Currently resides at Spore. Look for LabVIEW project.
Please email me at [email protected]
BR,
Bug Killer

you can visit my website: www.bjcyck.com

Looking for LabVIEW job

Dear Sir\Mam,
I am Rajmohan,i am looking for LabVIEW job.I have CLAD certification with 3 years experiance in Automation field,if you have any opening pls consider me.Herewith i have attached my Resume.i am expecting your acknowledgemet,Thanks
Attachments:
RAJMOHAN.doc ‏65 KB

You may have more luck in the specific LabVIEW Developer's Looking for a Job board: http://forums.ni.com/t5/LabVIEW-Developers-Seeking/bd-p/JobSearch
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Looking for LabVIEW drivers for Aritsu MS462XX VNA?

I'm looking for LabVIEW drivers for the Anritsu model MS4623D Vector Network Analyzer? Have gone to Aritsu's site and downloaded their tools but no LabVIEW source found. The other thing is whether anyone's developed LabVIEW interfaces to theirTools (Navigator or Power Tools or SCE)???

Hi,
Unfortunately, we do not have an instrument specific driver for this Anritsu model MS4623D. Here is a link to the drivers we do have for Anritsu. We may be able to get communication to your device threw another means. How does your device communicate? For example is it GPIB or Serial. We may be able to use an NI driver and a programming manual for your device and communicate with it in LabVIEW threw this.
Regards
Krista S.
Applications Engineering
National Instruments

Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

Hi,
Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
uggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http:/
/search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Looking for a Apple developer to help me create an application

Looking for a Apple developer to help me create an application

Sure, but I meant he/she could sign up, and then see who is asking questions in the right sort of market area and potentially make contact that way ?

Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

Hi,
There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
Multi-Environment Certified IVI Instrument Driver
Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
Try LabVIEW 7.1 FREE Online
If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
-John M

Looking for labview driver to control Tennesy Chamber

Looking for Labview driver to control Tennesy Jr Environmental Chamber
(Watlow series 942 controller) LV6.0
Email [email protected] if you can help out.
Thanks,
David.

The first place to look for stuff like this is the vendor's web page--in this case www.watlow.com. How did I know this? I guessed. You can typically guess 90% of company websites...
In a couple minutes I was able to find your controller and a document on how to communicate with it. If you email me I can send it to you (it's too big to post...).
Next, reading the document (which by the way contains a good basic primer on serial communications)I saw that one of the protocols you can use for communicating with the 942 is Modbus RTU. I can also send you a set of modbus drivers.
Hope this helps in thermal testing your chips...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I am looking for a good development application for IOS. Please help me.Thanks.

I am looking for a good development application for IOS. Please help me.Thanks.

Xcode is required to submit your app to the App Store. So at some point (even if it is just to submit) you will need to use it.

I am looking for labview examples related to ECG

Hi, everyone!
I need your help.
I am looking for labviews examples, which are related
to ECG for my thesis .
I wait for your answer.
thanks in advance

Burcu;
I am not sure what type of examples are you looking, so this is a start:
Searching at the LabVIEW Discussion forum I found:
Example
calculate heart rate from ECG
how to design a suitable vi to acquire ECG waveform?
Doing a search with Google:
LabView Exercise to model and analysis ECG/EKG data
EE 206 MINI-PROJECT I CARDIAC MONITOR VI
Searching an NI.com:
PC-Based ECG Monitoring and Analysis Using BioBench (LabVIEW VIs at bottom - not sure if link is dead)
Regards;
Enrique Vargas
www.visecurity.com
www.vartortech.com

Looking for LabVIEW job in Beijing,China

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

There is another board for seeking jobs. Why not try looking for it instead of posting the same thing over and over?
As for your first two lines, you may want to consider revising them, should you post the job seeking board. "Seeks the job" -- should be something like "I am seeking a job". I don't know what appropriate knocks are, and I don't think anyone else does, either.
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Looking for LabView Programmer in Seattle, WA

Water Tectonics focus is to provide innovative water quality processing solutions with select a group of individuals who value hard work, teamwork and personal initiative. Our applications/proprietary systems are utilized in industrial water processing to third-world water resource systems. We are looking for a person who wants to make a contribution to a growing company. I have outlined some general expectations for interested applicants. If you are please e-mail me at [email protected] with a resume if you would like to discuss this opportuntity further.
Requirements
Bachelors Degree in Electrical Engineering or Electrical Engineering Technology.
At least two (2) years of LABVIEW programming experience
CAD Experience
Experience with Microsoft Office Software
Ability to work with other technicians, engineers, and customers
Ability to communicate technical information both verbal and written
Responsibilities Include (but not limited too)
Control System programming and interfacing
Requirements defintion and evaluation
Writing up of system and test documentation
Electrical and mechanical print development and review
System wiring and mechanical buildups
Hardware installation
Regards,
Jason Mothersbaugh
Water Tectonics
www.watertectonics.com

Please post your question to [email protected]

Experienced Professional Looking for LabVIEW Job offer anywhere in USA

Hi,
I am Sreekanth Komatineni from Virginia looking for some job offer. Here is my brief experience.
Here is my Skillset.
Skills: LabVIEW, VB, VC++, C/C++, and Java with good customer interaction.
Experience Summary:
Over 7 years of Industry experience with 4yrs purely on LabVIEW in design and development of customized PC based Embedded Applications, Industrial automations, Data acquisition and Control Systems using LABVIEW 7.1/8.0/8.2/8.5 and NI DAQ Cards in the defense, manufacturing and telecommunication industries.
Experience with PMD USB Interface cards, GPIB Interface, VISA and Serial I/O Interface, Code Interface Nodes, Call Library Function nodes to interface with third party and custom Dlls, Multi-channel Data acquisition, Software Triggering, Analysis of acquired data with mathematical algorithms, Controlling and Monitoring applications, MODBUS and ASCII, I2C, UART communication programming on PC side, good at PC based Automations.
Willing to relocate anywhere in USA.
Thanks and Regards
Sreekanth. Komatineni
[email protected]

Hi Harold,
Please see my email to you & proceed accordingly.
Good luck!
- Partha
LabVIEW - Wires that catch bugs!

Looking for Labview/ Labwindows developer in Chennai

Similar Messages

Maybe you are looking for