Looking for LABView Programmer with Electrical Engineering Experience ($75K-$85K)

If you wish to apply send resumes to: [email protected]
Position Summary:
Systems Engineer with experience in LabVIEW development, instrumentation interface and system control. The engineer is expected to develop the software and GUI, select and integrate necessary instrumentation to meet requirements and properly document design. In addition, the engineer is expected to be able to specify electrical and electronic interfaces necessary in the development of a system. 
Essential Job Functions (listing most important first):
Will develop the software and GUI necessary to implement a data acquisition and control system.
Will select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
Will provide guidance in the development of electrical interface, schematic and wiring diagram of systems.
Will use electronic test equipment (Voltmeters, oscilloscopes, etc.)
Will generate software documentation such as requirement document, user manual, test procedures, test reports etc
Essential Job Requirements:
EDUCATION
Bachelor degree (BS) in computer, electronic, or systems engineering or a related technical discipline.
EXPERIENCE
Experience in LabVIEW development. Experience in PXI, DAQ systems, RS232 communications preferred. Five or more years of related experience.
REQUIRED SKILLS
Able to develop the software and GUI necessary to implement a data acquisition and control system.
Able to select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
Able to understand schematic and wiring diagrams.
Able to use electronic test equipment (Voltmeters, oscilloscopes, etc.)
Generate software documentation such as requirement document, user manual, test procedures, test reports etc
PREFERRED SKILLS
LabVIEW, Control & DAQ instrumentation, Serial Communications

Hi Andre,
You may get more success if you post to this forum:
http://forums.ni.com/ni/board?board.id=JobPost
Ray
( tbob, are you busy these days?  )
Message Edited by JoeLabView on 11-09-2005 12:40 PM

Similar Messages

  • I am looking for LabVIEW programmer job.

    I am LabVIEW programmer with 6 years experience.
    My expertise is optical communication, signal/image processing, C/C++.
    I am living at Israel.
    T.U in advance
    Nadav Chernin
    [email protected]

    It sounds like you have solid experience. Have you considered contract work? The job market kinda sucks right now. Check out net-temps.com and jobcircle.com. Presently I work through a contract house called YOH Scientific, yohscientific.com in Newark, DE. I'm sure they could find you work but they'll skim a lot off the top. I worked with optical comm when I lived in Mass. Too bad it took a dive. I still see a lot of opportunities for RF comm in southern New Jersey. They usually want LabWindows/CVI. Since you know c/c++, LW/cvi would be a cake walk for you.
    Parts of California are also looking hot. I just got this from my net-temps search agent:
    1. Software Design Engineer
    CA Valencia 6 - 9 months
    http://www.net-temps.c
    om/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53685XS​LN
    2. Sr. RF Test Engineer (San Diego)
    CA San Diego 0 - 30 days
    http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt​278/300278-3074-13-72416
    3. Lead Test Engineer
    CA Torrance 12+ months
    http://www.net-temps.com/adcgi/jobref.cgi/jsd/manp​126/PR90630_NT_53706XJDC
    4. Lead Engineering 3
    CA Torrance 180 - 365 days
    http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt​272/300272-1063-13-72458
    Good luck,
    - Kevin

  • Job openning for Labview developer with fiber optical experience, Fremont

    I have a job openning for Labview developer  with fiber optical experience,  Fremont, CA
    If you have interesting, reply this email ASAP.

    Continued here

  • Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

    Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
    This position is located at Lokhandwala, Andheri West, Mumbai.
    Requirements:
    Applicant must meet the following criteria:
    2+ years of LabVIEW experience.
    Should be from Engineering background.
    Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
    Knowledge of NI DAQ hardware boards.
    Automated test, measurement, data acquisition, and/or control experience.
    Good at documentation.
    Knowledge of Software Development Cycle
    Must be able to meet objectives as directed.
    Ability to effectively work independently.
    Ability to contribute and work in a team environment.
    Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
    Good communication skills.
    CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
    If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
    E-Mail: [email protected] 
    Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

    Kindly send me your resumes on [email protected]

  • Job openning for Labview developer with fiber optical experience

    job openning for Labview developer  with fiber optical experience

    I am a Test Engineer with 10 years LabVIEW experience, as well as TestStand, VB6, C, Assembly language, programming
    also experienced with electronics/hardware, and a talented problem solver
    I worked for CIENA Corporation writing automatic testing software for their fiber optic products (DWDM)
    Available due to plant closing
    please contact me at [email protected]
    thank you

  • Looking for LabView Programmer in Seattle, WA

    Water Tectonics focus is to provide innovative water quality processing solutions with select a group of individuals who value hard work, teamwork and personal initiative.  Our applications/proprietary systems are utilized in industrial water processing to third-world water resource systems.   We are looking for a person who wants to make a contribution to a growing company.  I have outlined some general expectations for interested applicants.  If you are please e-mail me at [email protected] with a resume if you would like to discuss this opportuntity further.
    Requirements
    Bachelors Degree in Electrical Engineering or Electrical Engineering Technology.
    At least two (2) years of LABVIEW programming experience
    CAD Experience
    Experience with Microsoft Office Software
    Ability to work with other technicians, engineers, and customers
    Ability to communicate technical information both verbal and written
    Responsibilities Include (but not limited too)
    Control System programming and interfacing
    Requirements defintion and evaluation
    Writing up of system and test documentation
    Electrical and mechanical print development and review
    System wiring and mechanical buildups
    Hardware installation
    Regards,
    Jason Mothersbaugh
    Water Tectonics
    www.watertectonics.com

    Please post your question to [email protected]

  • LabVIEW programmer with modular instrumentation experience (short term) in NYC area

        We have a requirement
    for a short term (3-12 months) contract to develop LabVIEW based software
    around modular Instruments (e.g. laser, APD, photon counting) hardware. The
    work can be done part time or full time, but the person must be able to come to
    the lab in NYC. The candidate should have significant  knowledge and
    experience.  Send resume and contact information to [email protected]

    Hi Mr Weaver
    I found this message posted in March , I sincerelly hope you satisfied your needs for a labview programmer / analyst.
    We are a group of three engineers dedicarted to the mechnical and electrical design of industriy solutions. Currently full time employed as a Sr test engineer with a firm in the Chicago suburbs, I develop applications in labview to automate testing for design validation which range from mechanical, electrical, functional, regulatory , environmental and RF including sound and vibration testing. I have been writing atomated test cases for the last 15 years in environments, using tools like high level text programming languages and Labview to integrate test equipment into automated test systems using RS232,USB,GPIB ports for high volume manufacturing testing of subassemblies and finish goods.
    Our experienced electrical engineeer develops process control solutions around PLC, DCs and SCADA tools for the farmaceutical, food and beverage industries with proven record of oversees experience for the last 10 years. 
    Mechanical Engineer also currently employed as design engineer in the Chicago area with experience in design tools like Pro E, participate in the mechanical design of the integrated systems, drawings and schematics.
    We can offer an integral solution to your current and future needs for engineering services.
    Martin Ayala
    [email protected]
    (630) 596 3929

  • Looking for labview programmer in singapore (project)

    Hi
    I am looking for some experienced freelace programmer that can help me in my school project.
    The objective is to design a  vi that help to caluclate angular gyro rate for a gyro test using Gyr lisy300al.
    Any help will be appreciated.
    thank you

    Please post your question to [email protected]

  • Looking for SAP Developer with HR/Payroll experience

    Hi All,
    We are currently recruiting for an SAP developer with HR/Payroll experience for a permanent role in Canada.
    For more details please email me at [email protected]

    I need a functional consultant that has done configuration in SAP HR Payroll.
    Michelle Yang
    Vice President
    Direct(925) 989-7337
    [email protected]

  • Looking for SAP Developers with FI-CO experience

    Hi All,
    We are currently recruiting for an SAP developer with FI-CO experience for a permanent role in Canada.
    For more details please email me at [email protected]

    I need a functional consultant that has done configuration in SAP HR Payroll.
    Michelle Yang
    Vice President
    Direct(925) 989-7337
    [email protected]

  • Hoston firm looking for LabVIEW Programmer Urgently

    We are currently seeking to fill a LabView Software Engineer position for our client in Houston, Texas. We are a Houston, Texas based firm specializing in process optimization for industrial IT. We offer competitive compensation with good growth potential. For further information and to apply today, contact us at [email protected] or call 713-532-1280.

    Please post your question to [email protected]

  • Houston based company looking for LabVIEW programmer​s

    Infodat in Houston currently has 2 openings for immediate hiring for the following:
    Engineers to develop software applications for integration with various hardware and control systems primarily using LabVIEW. The position involves integration of projects, proposal generation, and maintenance and upgrade of existing applications. Exposure to the Oil and Gas industry is a plus.
    Infodat’s major areas of focus and delivery are in the Oil and Gas industry with focus on the following:
    §               Tests & Measurement
    §               Data Acquisition and Control
    §               Process Automation
    §               Mobile Technology
    §               Web-based applications
    Please email resumes to [email protected] and  [email protected] 
    For more information, please contact: Andy Bhardwaj at 281-851-9062 or via email at [email protected] 
    All inquires will be held in strict confidence.

    You should [post in the correct forum here:
    http://forums.ni.com/ni/board?board.id=JobPost

  • Looking for labview training

    Hi
    i m looking for labview training with less cost in delhi or online training
    Arul

    we do provide labview training
    please check www.jambhekar.com
    my contact details
    cell 9970168164
    mail [email protected]
    Tushar Jambhekar
    [email protected]
    Jambhekar Automation Solutions
    LabVIEW Consultancy, LabVIEW Training
    Rent a LabVIEW Developer, My Blog

  • LabVIEW developer with 7 years experience looking for a contract or permanent position

    Hello all,
    I'm a 7 years experience LabVIEW Programmer with BSc. I'm expert in the following field:
    -LabVIEW (5.x, 6.x, 7.x, 8.0)
    -DAQ, RS232, GPIB, USB
    -Vision (Imaq)
    -LabVIEW RT (PXI, fieldpoint, Desktop PC Real Time), Embedded development
    -Goop
    -Databases (MSDE, MSSQL Server)
    Currently living in Switzerland and still employed in a big company, I'm loooking for a permanent job or contract in USA, Central and south America, India or Australia. I speak English, French, German, Portuguese and have some spanish knowledge. 
    Thanks in advance for any offers and/or tips.
    Regards
    [email protected]

    Bonjour Jerry,
    Je travaille au recrutement de personnel chez Averna et nous sommes actuellement à la recherche de ressources pour des opportunités permanente à titre de concepteur logiciel de test (Labview). Le poste est situé à Montreal, au Canada. Pourriez vous être interessé par cette opportunité? N’hésitez pas à communiquer avec moi pour plus de détails! Dans l’attente de votre réponse, je vous souhaite une bonne journée, Cordialement, Armelle FOUCHER
    Consultante
    T (514) 842-7577x509    |    [email protected]  

  • Looking for a programmer

    Im looking for someone without a lot of experience to share knowledge with (no complete newbies, please). Im trying to create a MORPG and it'd be nice to work with someone who has at least a little experience with java. I personally, began learning java about a month ago and Im really committed to accomplishing my goal (Im 18 years old).
    my email is [email protected]
    Im intensively studing java and Im not a complete noob.
    Please, feel free to contact me at any time.
    PS: Ive already created a nice but incomplete map generating engine (tile based), and I incorporated movement.

    youll have more luck here: [java gaming|http://www.javagaming.org/forums/index.php]

Maybe you are looking for