Looking for Laserwriter 360 driver

My first time in the Forum... might be doing this wrong. I have a LaserwriterSelect 360 ... hooked through an Asante Talk box ... then into a Netgear router (ethernet cord) ... then into my iMac - G4. It used to work great. All of a sudden ... awhile back ... the 360 disappeared from my printer/fax system window.
I cannot get the printer utility to find the 360 anymore. What's weird is I see the 360 in the System Preferences Network "location" window! I think I need to re-install the 360 driver ... or is that the Laserwriter 8 driver? Whatever ... if anyone knows if that's what I need and where I can find it ... I would reeeeeeeeally appreciate the help. Phone support has not been helpful. I think flumoxed is a good word here. Thank you. -- Herbonicus

Answered my own problem. If anyone should have the same issue
here's the fix: Disconnect your Asante Talk box ... power cord ...
Laserwriter cord for a few minutes. Turn printer
on. Connect Asante power cord ... while light is blinking on the
Asante box ... plug in your printer cable to the box. Viola!!!

Similar Messages

  • I am looking for a backup drive for my macbook pro, any suggestions?

    I have a macbook pro and I am looking for a backup drive.  There are so many out there and I would like suggestions for which one to purchase.  Thanks!

    Pretty much any drive will work, but for a laptop, you might like to get a portable drive (doesn't require that you connect it to power) with USB3. Thunderbolt drives are also available, but they're more expensive and no faster than USB3 for a single hard drive.
    I personally like the Lacie rugged series: http://store.apple.com/us/product/H9377ZM/A/lacie-1tb-rugged-hard-drive-triple-u sb-30-5400-rpm?fnode=5f
    If you shop around you should be able to get it a little cheaper than Apple's prices.
    Matt

  • OS X keeps looking for missing network drive

    Hi there,
    I notice, I am not the first to ask the question, but is has not yet been answered and I'm a bit puzzled. I am using OS X 10.7 by now and ever since OS 10.6 I have noticed that - sometimes - finder seems to be looking for a network drive (a former time capsule) that is no longer mounted and available. Every once in a while I get the message that the drive "name" cannot be found.
    Where can I check to get rid of any references to that old drive? It must be mapped somehwere, alas, I don't know where.
    It is not in the startup items, I've checked there and there is no file sharing activated.
    Thanks in advance, Alex.

    I think this solved my problem, after having checked Console:
    http://paikialog.wordpress.com/2011/08/23/how-i-fixed-my-mac-os-x-lion-slowness- issue/
    sudo mdutil -i off /Volumes/RootPartitionName

  • Looking for graphics adapter driver for Presario c700 video

    Looking for graphics adapter driver for Presario c700 video

    Please read the XP Downgrade Guide at the link below:
    http://h30434.www3.hp.com/t5/Notebook-Operating-sy​stems-and/General-XP-Downgrade-Guide-for-HP-Laptop​...
    The guidance for installing XP on your model series can be found under the section labeled 2. Moderate Models.

  • I am looking for a Mac driver for a Muratec MFX 1430 printer/fax/copier.  Is there one out there for a Mac?

    Looking for a Mac driver for a Muratec MFX-1430 printer/fax/copier
    is there such an animal out there?

    http://www.muratec.com/new/support/drivers.asp does not appear to support that model at all on the Mac.
    Some open source drivers* may exist to support it.
    * Links to my pages may give me compensation.

  • Looking for Keyence Instrument driver for LV.

    Looking for instrument driver for LV developed for the Keyence LS-7500 series micrometer. Has anything seen any or done this already? Any help would be greatly appreciated. BTW I have already checked NI's listing of instrument drivers to no success.

    Hello-
    There are no drivers listed for this instrument at http://ni.com/idnet. You may want to contact Programmed Test Sources to see if they have a LabVIEW driver for their instrument. If they don't, you can easily create a low-level driver by configuring an I/O assistant VI for each function in the manual. Once you have this low level driver you can just combine functions to make higher level VIs. Alternatively, you can hire an Alliance Member to write an driver for you.
    Alliance Member Directory
    http://www.ni.com/alliance/alliance_member.htm

  • Looking for a hard drive for a 2007 Macbook Pro

    I am looking around to replace my 160 gig hard drive for something larger.
    These are my choices:
    Hitachi 500GB Travelstar SATA 7200 RPM
    Hitachi Travelstar 5K500.B - 500GB 2.5" SATA 5400 RPM 8MB
    Fujitsu MJA2500BH-G2 500GB 5400 RPM 8MB
    I am just looking for something that won't wear down the battery, vibrates or produce some noises. Some speed increase would be nice if possible.
    I may pick the Hitachi 500GB Travelstar SATA 7200 RPM. But I am not 100% sure if this is a good drive or not.
    Message was edited by: Sean Coon

    I would choose anything that Other World COmputing would recommend.
    But before I swapped out to a 500GB drive, I would make sure I had redundant backup plans in place: both an external local drive, and offsite backup.
    500GB is an awful lot of data to lose when the drive fails. And it WILL fail at some point.
    What can you possibly fill up 500GB with? If movies or music, that stuff may be better off on its own, small, sleek, 7200RPM hard drive all the time (plus an offsite backup). If you're editing movies, the professionals don;t use their main drives for that - they use quality external drives for editing and storage (plus, of course, an off-site backup).
    Yes, I upgraded my MacBook Pro's hard drive to 200GB (original 7200RPM option was only 100GB). But I cannot fathom - ME, personally - filling up my MacNookPro's internal drive with 500GB of important data. I have a music drive, and work on other large work files on external 7200RPM drives.
    Whatever you do, please have reliable, regular backup schemes in place.
    Clint Bradford

  • Looking for Essbase ODBC driver for iBATIS.

    I've seen this question posted 2-3 times before but not with any solid answer. I'm deloping a piece of Java code that is going to use iBATIS SQL mapping (not really important I guess) to connect to an Essbase database sitting on a Microsoft box and insert information into the tables. Is there a JDBC/ODBC driver available for this? I remember something about the driver being on the server itself with the install but what is the location of it? Looking for any help, thanks.

    Anyone?

  • Looking for right sound driver to downlo

    The more I read the more confused I get. I Just installed Windows
    vista (32 bit) and I do not get any sound? thrue the card so I thought that I would
    update my drivers. I have a model # SB0570 which comes back to an Audigy SE.
    But I do not know which file is the driver file I need for my sound card to work.
    can someone post a link?

    http://support.creative.com/downloads/<look here,the top driver looks to be the newest.

  • Looking for external hard drive for Mac book air

    I'm looking for a external hard drive for my Mac book air

    What features are important to you?
    Size?
    Capacity?
    Speed?
    Price?
    Reliability?
    HDD or SSD?
    Desktop or portable?
    Just about any USB external drive will function properly, with only a few exceptions. I would avoid the Toshiba Canvio using USB 3.0, as it has been the topic for numerous threads here wherein users have had problems using them with the MacBook Air.
    My personal favorite external HDD right now is the Seagate GoFlex, as I can use them with the Thunderbolt adapter. But I have been eyeing the new LaCie Rugged Thunderbolt.
    For super speed, I use a Crucial model M4, either using the Seagate Thunderbolt adapter, or I have some mounted in USB 3.0 housings.

  • Mac looking for missing NAS drive upon startup

    Every time I reboot I get a message that an old NAS drive I used to have can't be found. How can I get my Mac to stop looking for that drive when it boots up?

    Check +System Preferences > Accounts > Login Items.+
    If the drive is shown there, highlight it and click the minus sign at the bottom.

  • Looking for HP Basic Driver only for hp 2610 all-in-one printer

    I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
    I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
    This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
    But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
    Regards
    Tech

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • Win7 install looking for CD ROM driver (after loading from CD) cannot find it so fails to install.

    Product: HP-IQ-775
    OS? Gone!- Was WIndows Vista HP-SP2, but System Recovery wiped it out!
    Error Msg: Current message that is stopping the installation of Windows 7 is "Missing CD/DVD ROM Driver- Please insert disk, or browse to location of driver" Browse accnot find driver needed (whatever it is... it is running form the bootable CD drive, so obviously it found something!)
    Changes? Oh yeah, you bet!! I have had so many problems with this machine, I cannot list them all. After running the Windows 7 Upgrade Advisor, which reported only 2 issues, both software and both resolved, all OS upgrades installed, all drivers updated, ran the MS Malicious Software app, then attempoted an upgrade from Windows Vista- Home Premium, Service Pack 2. Long story short, after 3 days of 'installing Windows 7' on the screen, it failed. No explanation just "update failed, system will rollback to Vista". The rollback was uneventful, but sytem began having problems. Missing drivers, USB ports failed, CPU Fan Failure shut downs, blue screen after blue screen. I sent my system logs to an MCSE 'expert' and he reported " there are so many issues in the logs, that it would be a miracle if the machine ever ran again" He suggested Formatting the drive and instaling Win 7 clean. WIth far too much going on  with projects, I could not do this. Ultimately, Updates would not work, A/V software would not update, Vdeo software would not run. I contacted Microsoft, and after a week or so of email volleys, they escalated it to thieir 'expert', who after a few hours troubleshooting remotely, and multiple failed System Restores, said the only hope was a System Recovery.
    After backing up everything today, I did the System Recovery from the Factory Image, the result was fatal! It went through the first half, erasing my operating sytem and associated files, drivers etc, it reported "Error found in Sytem Configuration, System Recvovery not completed", leaving me with an X drive, a C: drive tith nothing on it, and between the two, sho about 30GB of space total, on a 500GB drive!
    I figured this would be the best time to do a 'clean install' of Windows 7, as I no longer had an OS to upgrade! I ran my Win7 Install disk, which ran fine, loaded its files, then reported "missing CD/DVD driver. PLease insert floppy, CD or flash drive, or browse to external drive with driver location"
    Needless to say, I could find noting that it would accept. I even downloaded a driver from TSST (CD OEM) but the installer would not accept it from the flash drive. That is where I am now. No OS loaded, partitions screwed up, command prompt finds noting but X: (Recovery files?)29GB,  and C: what is left of it, it shows 9GB. Where is the rest of my disk? Who knows.
    I have 5 external drives, full system backup on one, all data files on another, System Recovery Backup on another, but cannot access anything with no OS. I can only use the Win7 install boot disk to access the computer at all, and it has limited functionality.
    I am writing from my HP-dv-9720 notebook, which has its own OS issues (still running on Vista basic as it will not install SPs), so it is available for email and driver downloads if necessary.
    Anyone want this challenge?
    Thanks
    Doug

    WOW! 9 months later and not a sigle response. And now I am back! (Windows7 worked fine BTW!) Now I have the FAN FAILURE, yet the only thing that works on the computer, IS the FAN!! HP is ware of this problem but has done nothing except post a bunch of unrelatre (to IQ-775) stuff! A replacement fan (not that it is needed) is over $300, almost half of what I paid for the entire system!! BS! This is a latent defect and should be fixed by HP!
    I currently have 3 HP computers, 5HP printers and an HP plotter! I have been a loyal HP customer fore over 20 years! IF they do not fix this, FREE, I will NEVER buy another HP product again! That is a promise! This is pure BS!  The machine will not boot due to a false "fan failure' report. both fans are running fine, and always have. The defect is in the reporting software or fan firmware, NOT the fan!
    I will be back in 9 months to answer myself again!
    DN

  • Looking for HP 5371A driver for Labview 6.1?

    want to communicate with HP5371A by PC over GPIB port

    I think that device is too old for finding a driver for labview. If you have all the GPIB command, it's easy to program. I made it for another type of instrument.
    Benoit Séguin
    Software Designer

  • Looking for a serial driver for an agilent 4395A to work with labview

    Can only find one for gpib I have no interface for gpib on my PC but i do have a rs232/gpib converter and was wondering if I could get a serial driver for the agilent 4395A for this.
    Thanks

    I've only used the RS232/GPIB converter to go from a GPIB bus to a serial instrument so I can't speak for going the other direction but I would give it a try. However, you have big problems with the driver if its the same one I just downloaded from NI. It's not really what I would call a driver at all but an application program meant to be used stand alone. There is no breakout of instrument functions into subVIs and none of the controls or indicators are on the connector so you can't even use the high level app as a subVI without a lot of work. It is a contributed driver but I'm surprised NI accepted it because it doesn't follow any of the published rules for an instrument driver. It's not even a good example of program design, imho. There is a VISA dr
    iver available from Agilent here and I would try that instead. To use a VISA driver with a serial port, you just specify the VISA resource name for that port instead of the GPIB resource name. For example, a GPIB resource name of an instrument with an address of 5 would be "GPIB::5::INSTR". To communicate to your instrument over com port 1, the VISA resource name is "ASRL1::INSTR". If the instrument has a serial port in addition to the GPIB, you could also try skipping the converter. Some VISA drivers work fine either way.

Maybe you are looking for