Looking for LV developers in southern New Jersey

Looking for 2-3 LV programmers for 1+ year FT contract position in the
southern New Jersey area. Would like 3+ yrs experience with real projects
but flexible.
email me your resume (preferably PDF) with a brief description of your
experience in the email header. Send it to "gnu_voodoo AT netzero DOT
com" (replace AT and DOT with the good stuff)
Try to get it to me by this evening or tomorrow morning. I'll try to get a
better job description by the end of today. I'll forward it to those that
reply.
-Methis

Thank you for posting this. My power has also been back on since Wednesday night but no Comcast service since before the storm. I rely on Internet service for outside communication as I have very little signal connectivity on my phone in and around my home. Every time I am able to go out, I check the comcast app on my phone, but I get the same message every time. The estimated time of service return message has said "10 pm tonight" since Thursday morning. I've seen repair vehicles around town so I know they're working on it, but real updates pushed through the app and the account page would be nice.

Similar Messages

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Looking for MI Developers and Architects

    Established company in Orange County (California) is currently looking for experienced developers and architects in SAP Netweaver Mobile. Competitive slaries, plus bonuses, we will also sponsor visas to work in the US . Please email resumes if interested to:
    anton at rapidconsultingusa.com

    You can also try posting to the Flex Jobs mailing list, if
    you haven't already:
    http://tech.groups.yahoo.com/group/flexjobs/
    hth,
    matt horn
    flex docs

  • Adobe Looking for Mobile Developers and Designers for Upcoming Research Study

    The Adobe User Research team is looking for designers and
    developers working on mobile projects in the New York City and San
    Francisco Bay areas. We will be conducting site visits starting the
    week of March 17th and into early April, and would love to meet
    with you to learn about your work.
    A session typically lasts about 2 hours, and during that
    time, we’ll ask you to walk us through some of the processes
    you go through on a day-to-day, project-to-project basis. We are
    interested in getting a better understanding of how you work, your
    approach to projects, and how we can improve our products to meet
    your needs.
    As a token of appreciation for your valuable time, we offer
    Adobe software (or a $200 AmEx gift check) and other Adobe swag.
    If you are interested, please complete our brief screener at:
    http://www.adobe.com/go/mobile_screener
    Adobe User Research

    FYI, this is a poorly worded set of possible answers:
    8. How much experience do you have using the following technologies?
    I’ve never heard of that technology
    I’ve investigated that technology but never used it professionally
    I’ve spent some time working with that technology
    I am comfortable using that technology
    I have used that technology on a daily basis for less than 1 year
    I have used that technology on a daily basis for more than 1 year
    For a number of these technologies, I've heard of them but have not been inclined to investigate, which seems like it would be useful info to Adobe.

  • Looking for quick creation of a new contact during activity processing

    We are looking for a quick way to create a new contact during the process of activity management.  Once I have selected my business partner and then I search for a contact, if the contact I need does not exist yet there are several long involved ways to go create the new contact.  Several people from SAP have alluded that there is an add button that should be available on the business partner central search window that comes up when you look for contacts but we have no add button.  Does someone know if the add button becomes available later?  We are on CRM 5.0  - has anyone customized a way to add a contact here without having to go into the account application relationship tab.  We are coming off of Mobile Sales where there is a pop up window to add a contact. We need to replace this functionality.

    Hello Pascale,
    "Follow-up" button is present to enable a quick creation of follow up.
    That is end user can just input those limited fields, and click on this button to create the document without going into the detail.
    And at the same time, standard IC do provides another link to the detailed follow up documents to enable user add more detail.
    The link "Follow-up Details" can realize such purpose and should be the one you are asking for.
    The steps are:
    - select the transaction type in the drop down;
    - click on "Follow-up Details" link, this lead to another page of the detailed activity creating, only at this time the activity is being created;
    - click on the Back button without save, you will return to the previous screen, and get the link in Activity Clipboard for future access;
    Hope I have understood your requirement correctly!
    Hongyan

  • Looking for FLEX Developers and Flex production support specialists

    We are looking for several strong Java/Flex developers as
    well as Java/Flex production support specialists for long term
    consulting/right to hire opportunities with a global telecom client
    in Warren, NJ
    6 month contract potential/right to hire
    For more details please email me/send a resume to
    [email protected] or call me at 732-726-2237
    Thanks
    Jim Lang
    Sr Technical Recruiter
    CGS Technology Associates Inc
    732-726-2237

    You can also try posting to the Flex Jobs mailing list, if
    you haven't already:
    http://tech.groups.yahoo.com/group/flexjobs/
    hth,
    matt horn
    flex docs

  • Solar Company looking for Labview Freelancer in Southern Germany

    Hi!
    For the Data Analysis and Modeling Team of Soitec Solar I am looking for a Labview Freelancer. Soitec Solar is located in Southern Germany in "Freiburg im Breisgau", close to Switzerland and France. Soitec Solar is a manufacturer of photovoltaic systems for industrial markets.
    We offer some compact but interesting projects dealing with the acquisition of data generated by meteorological sensors and IV curve tracers for photovoltaic modules. The duration of these projects ranges from a few weeks to some months.
    Telecommuting is generally possible, but applicants should be located within ~150km distance as at least two face-to-face meetings per project are required.
    If you are interested, please contact me and attach a short description of Labview projects you have realized in the past:
    Tobias Gerstmaier, e-mail: [email protected], office phone: +49 761 214 108 42
    Best regards,
    Tobias Gerstmaier

    I'm located just on the swiss side of the swiss-german border (approx. 50km away).
    I've done several freelance projects in the past on Spectrometer software and wafer-based quality control automation.
    I'll send you an email shortly if you are still looking for someone.
    Shane O'Neill
    Say hello to my little friend.
    RFC 2323 FHE-Compliant

  • Looking for Safeway .bar file, preferably newer 2.2x version

    I've looked everywhere and can't seem to find a version of the Safeway shopping app that will install and run properly on my Z10 OS 10.1.   I managed to find an older APK that supposedly converted to BAR but after installation and "Accept" the initial terms, it stops running.
    Anybody have a pointer to a working, recent Safeway app?  Thank you!

    Yes, I'm also looking for the same; hard to believe it's so difficult to find this little app for my Z10.
    I've tried the APK to BAR converter page on goodreader.com with the 1.0.71 version of the app that I found, and the upload process fails every time so no joy there.

  • Looking for the msc1210 demo app new buffer.vi

    Hi i'm looking for this example that works with the msc1210 ( a card with a precision adc)...i have the labview 7.1 and this vi it's not between the examples that the labview have.
    If anyone Knows something please let me know..
    Manuel Meza
    Student from Universidad de Concepcion
    Chile

    I'm not sure I quite understand what you are asking. The MSC1210 that I checked on is a micro controller from TI and it has a 24-bit A/D. It is a chip and not a card. Is this on a board you bought from someone or one of your own design? If you bought a board from someone, they should have provided some sort of driver. You may want to check with them if they have a LabVIEW driver but otherwise you will probably have to use the Call Library Function Node to access the DLL they (hopefully) provided. If the board is your own design, you will have to write your own windows driver for it.

  • Carnegie Mellon University looking for mobile developers opinion

    We are conducting a survey of mobile application developers aimed at improving our understanding of mobile application development, focused on developer practices for building mobile applications. This is a research project, sponsored by the CyLab Mobility Research Center of Carnegie Mellon University. Survey results will be made public and will be available at http://mobileplatforms.wikidot.com in early 2010.
    The survey is open to anyone who is involved in the design and development of mobile applications, and should take 10-15 minutes to complete. There you will first be asked to give your consent to participating in the survey. If you have questions about the survey, please send an email message to [email protected]
    If you would like to participate in the survey, please click to go to:
    http://2010MobileDeveloperSurvey.questionpro.com
    Thank you very much for your participation.
    All responses will remain confidential and secure. Thank you in advance for your valuable feedback. Your input will be used to ensure that we continue to meet your needs. We appreciate your trust and look forward to serving you in the future.
    NOTE: Feel free to circulate this message amongst your colleagues and/or post it on your blog.

    Done! I built a restaurant recommendation application for the Apple iPhone. Unfortunately it wasn't approved by Apple due to their rather confounding approvals procedure. Hopefully your survey will lead to a better understanding of application development and deployment on mobile platforms. Several iPhone game developers that I know have also had trouble getting apps approved in the past.

  • Looking for Game Developers/Producers and Virtual World Developers for Adobe Research Study

    The Adobe User Research Team is interested in talking to game developers/producers and virtual world developers to better understand the development process, the tools/technologies used, and the development/business challenges.  Your insights will help us improve our platform and tools as well as develop new solutions.  You do not need to be Flash developers to participate.
    The research study will be a 2-hour one-on-one phone interview.  As a token of appreciation, interview participants will receive a $150 American Express Gift Check.
    If this sounds like something you might be interested in, please fill out our short preliminary screener here:
    http://www.adobe.com/go/gamedevscreener
    If the study is a good match, we will contact you by phone or email to schedule a time.
    If you have any questions, please feel free to contact me at [email protected]
    Thank you for your interest!
    Sara Kang
    Adobe Market Research

    FYI, this is a poorly worded set of possible answers:
    8. How much experience do you have using the following technologies?
    I’ve never heard of that technology
    I’ve investigated that technology but never used it professionally
    I’ve spent some time working with that technology
    I am comfortable using that technology
    I have used that technology on a daily basis for less than 1 year
    I have used that technology on a daily basis for more than 1 year
    For a number of these technologies, I've heard of them but have not been inclined to investigate, which seems like it would be useful info to Adobe.

  • Looking for the developers guide

    It seems that I can't find a link to the developers guide.
    Can anyone point me to it ??
    Thanks a lot.

    http://www.oracle.com/technology/products/webcenter/documentation.html
    Documentation
    On this page, you can access the latest documentation set for Oracle WebCenter Suite. You can view the complete Documentation Library CD here. For information about the Oracle Application Server, refer to the Oracle Application Server home page.
    Technical Information
    Focus Area Divider.
    Getting Started
    Focus Area Bullet.      Oracle WebCenter Framework Tutorial HTML | PDF
    Focus Area Bullet.      Oracle WebCenter Framework Tutorial Sample Files (Required for the Tutorial) ZIP
    Focus Area Bullet.      Glossary HTML
    Building a WebCenter Application
    Focus Area Bullet.      Developer's Guide HTML | PDF
    Troubleshooting Your WebCenter Application
    Focus Area Bullet.      Release Notes Linux | Windows
    Focus Area Bullet.      Error Messages Guide HTML | PDF

  • Looking for a definitive answer on new Mac Pro and After Effects

    If anyone can direct me....
    I want to know if AE CS6 or CC would benefit from the Dual GPU in the new Mac Pro. Or, would I be better suited maxing out a current 27" iMac?
    I'm hoping for close to real-time previews of multiple effects and expressions.
    Thanks.

    Adobe has said their CC software WILL support OpenCL going forward, but they have not shipped a version that does support it yet.

  • Onoing comcast outage in southern New Jersey

    My cable TV & internet has been out since 1:30 AM on Wednesday 6/24, 7 hours after a major storm. When my electricity came back at midnight, I had TV & internet for an hour & a half, then it dropped and hasn't been on since. I call Comcast and all I get is a recording saying there is an outage and the ETR is at some time. That time comes & goes and the recording is changed to say the ETR is now 12 hours later. This morning, it said it should be fixed by 2 PM. Just now it's been changed to say tomorrow at 2 AM. There's no word about what's going on, what specifically has happened, what's being done to fix it, nothing except a recording that keeps lying to me. What's going on, Comcast? I realize that it was a major storm but it should have been fixed by now. This just shows how little Comcast has spent on network redundancy. There shouldn't be a "single point of failure" in a network as wide as Comcast's.

    Thank you for posting this. My power has also been back on since Wednesday night but no Comcast service since before the storm. I rely on Internet service for outside communication as I have very little signal connectivity on my phone in and around my home. Every time I am able to go out, I check the comcast app on my phone, but I get the same message every time. The estimated time of service return message has said "10 pm tonight" since Thursday morning. I've seen repair vehicles around town so I know they're working on it, but real updates pushed through the app and the account page would be nice.

  • Looking for SAP Developers with FI-CO experience

    Hi All,
    We are currently recruiting for an SAP developer with FI-CO experience for a permanent role in Canada.
    For more details please email me at [email protected]

    I need a functional consultant that has done configuration in SAP HR Payroll.
    Michelle Yang
    Vice President
    Direct(925) 989-7337
    [email protected]

Maybe you are looking for

  • How can I restore my old history & bookmarks if I didn't run backup before re-installing a new clean OS? I've been using Firefox for 7 years as default, help me

    Hello, I believe that what I'm asking is simple & clear. Do you or do you not store user data backups on your servers? I've been using Firefox, as the default browser, for over 7 years. Naturally, I had to upgrade my pc's & operating systems several

  • HTC One Google edition

    If i order the HTC ONE google edition from HTC or Google, can I put my sim card in it and use it on Verizon's network?

  • Copying Part of a Sequence

    Hi Not sure how to do this but I have a long sequence. The client wants to see a 2 minute segment from the middle of the sequence. I suspect I might need to copy out the 2 minute clip and composites (text boxes, etc) into a new sequence but how to se

  • Default DFF based of user login and value set

    Hi All, My requirement is: Default the value of a DFF based on a value set and the person who logs in. My value set is: Person A - Value 1 Person B - Value 2 So, if person 1 logs in - the DFF value should be Value 1. If person 2 logs in - the DFF val

  • IPhoto library update issues.

    Hi all, I recently bought a new iMac and used the time machine backups from my MBP to migrate my programs, files, etc. to the new machine during the setup process. For some reason, the brand new machine was running really slow and the Apple folks had