Looking for model

Hi there,
  I don't have much experience in using apple product. But recently I am helping my friend to purchase a imac (desktop) supporting high-spec graph card. We are aiming at the Quadro K5200 or Quadro K5000. But seems that none of the online products have that video card equipped. So instead of using the built-in video card, is that any way we customize the model while we order the iMac online? If no, what model you suggest which supports that graph card? And is it easy to get it installed to the iMac? Thanks.

Allan Eckert wrote:
Those graphics cards http://www.nvidia.com/object/quadro-desktop-gpus.html can not be installed in an iMac. They are designed to be installed in older Mac Pros.
The directions to replace a graphics card in iMac can be found here https://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2267+Graphics+Card+Replaceme nt/13765
Thanks a lot. It doesn't sound easy to replace it. So which online model has best video (GPU) supports you recommend? Thanks.

Similar Messages

  • Looking for model from unknown model number?

    hello
    when i am browsing toshiba support, my model doesnt show up in the lists, i know only that it is from the toshiba tecra m10 series, ptmb3u-0hv01f model.
    is it a s1001, s3412, sp2901, 12e, 16a, 12e, 105 or whatever model??
    i understand that there are many variations to a model, but why the lack of information on this model?
    please tell me which model i have, so that i can find the support i need.
    regards

    M10-Sxxxx (PTMB3U-0HV01F)
    That one may have been specially made for a big-box store chain.
    Models in the same part-number family use essentially the same drivers and utilities and differ only in details. Compare the specs of these examples with yours.
    M10-S1001 (PTMB3U-00X00X) - Go here.
    M10-S3412 (PTMB3U-0D2061) - Go here.
    M10-S3452 (PTMB3U-0L9068) - Go here
    -Jerry

  • Looking for Model # on Time Capsule

    How do you find the model number of my airport time capsule? The bottom is not legible.

    Open your airport utility.
    Hold down the option key and double click the TC icon.
    You will get the full summary page.. at the top of the list is Model.
    But you should see it on the label if you use a magnifying glass.. it is molded into the first line of the rubber on older ones.. and on the label on later.

  • We have a powermac PC G5, softwareversion 10.5.8 We are looking for a dongel for internet. Who can help us?

    We have a powermac PC G5, softwareversion 10.5.8. We need a dongel for internet. Who can help us?

    You will have to do the checking for what is available in The Netherlands, or else be very, very patient for somebody else in your area to come by who can tell you which store to go to.  I suggest looking for models similar to the one I indicated in the link.  Do make sure they are specified as being Mac compatible.  Mac drivers are usually built into a device so don't buy one one for a PC in the hope that you can find a Mac driver online.  Only in a few cases are Mac drivers featured as separate files.

  • Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

    Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

    Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

  • 2nd hand Mac Pro: what to look for? Want later models

    Hi everyone
    I have a 27" iMac tha tis a couple of years old. I have outgrown the 1tb hd, and would prefer to go for a standard desktop design to make adding and changing drives easier. I want to avoid obsolence. I am not looking for a very new model, but one that is a current design. Can anyone give tips on how to determine how recent used Mac Pros i come across are?
    Thanks in advance for any tips you can pass on!
    John

    Additional information for completeness:
    The 2008 model and previous are Very Different from the 2009 and later. The 2009 and later can accept much more memory and that memory is substantially cheaper. The 2009 and later with the same number and nominal speed of processors approaches twice as fast in benchmarks due to architectural differences
    So if you expect to do compute and memory intensive modeling, Photo, Video, or Audio editing, limit your hunt to the 2009 model and later.
    If you are doing general work that does not involve large memory sizes, any model Mac Pro will work for you.

  • Looking for a Good White Paper on Oracle Data Modeling

    Hopefully this is the proper area in which to ask this questions - been looking around these boards for a while but can't find what I'm looking for. I'd like to get a good modeling overview for topics such as:
    -- pros and cons of normalization, e.g., performance considerations when deciding to normalize some data (and incur the cost of joins) vs keeping it denormalized (and having simpler queries)
    -- overall performance considerations
    -- warehouse vs mart considerations, esp as they relate to front end tools that will sit on the data mart
    A general data modeling white paper or PDF would be very helpful to get me started.
    Thanks all!
    Mike

    You don't need a White Paper you need a college course or a book.
    The book I have on my shelf, don't know if it is still in print, is CASE*METHOD Entity Relationship Modelling by Richard Barker
    Addison-Wesley Publishing Company
    ISBN 0-201-41696-4
    Normalization isn't about pros and cons. For performance denormalize. For data integrity normalize. Most systems end up somewhere between 3N and 4N or with what is referred to as Boyce-Codd NF. Google is your friend here but buy the book or take the course. This is not a subject to be read lightly in a dozen or so pages.

  • Looking for a Suggestion on Protege Notebook Model

    Hi,
    I might have posted this in the wrong forum, if that is the case then please accept my apologies for the same.
    I am looking to buy a new ultrabook. I am looking for the following specs:
    Price: Around USD800
    Screen Size: 13.3" (This is important as there are weight considerations and hence cannot go for any bigger screen)
    Screen should be easily tilted to 180 degrees since I have a small kid who could pull the screen back (I hope you people understand what I am asking for, this feature is not listed in any datasheet of Toshiba Notebooks)
    RAM Installed: 4GB (min)
    RAM Maximum: 8GB (min) (I should have the option for upgrading the RAM later to 8GB minimum, more the better)
    Weight: 3 lbs (or there about)
    DVD-ROM: Not NEEDED
    HDD: Would like to have a SSD with 256GB but given the price, I guess I have to settle with the normal HDD. But it would be great if I could upgrade later this HDD to a SSD.
    Keyboard: Backlit and SPILLPROOF
    Now I have kind of short listed some of the models and would love to hear the advise of the techies here.
    Model 1:
    Portege R935-ST3N02 
    Link for Datasheet: http://cdgenp01.csd.toshiba.com/content/product/pdf_files/detailed_specs/portege_R935-ST3N02.pdf
    Questions in my mind regarding this notebook:
    Will the screen be tilted back to 180 degrees, cannot find this information anywhere.
    The maximum RAM shown is 8GB but since this device has 2 memory slots, then wouldn't it be possible to have 16GB as the max RAM with 8GB card in each slot.
    HDD = 750GB but later would I be able to upgrade to a SSD Harddisk or not, to reduce the weight even more later.
    Keyboard: Is the keyboard SPILLPROOF and Backlit?
    Model 2: 
    Portege Z935-ST3N02
    Link for Datasheet: http://cdgenp01.csd.toshiba.com/content/product/pdf_files/detailed_specs/portege_Z935-ST3N02.pdf
    Max RAM is only 6GB (is there a way to upgrade to 8GB)
    SSD: Can I later upgrade to a higher capacity SSD like 512GB if an when they get cheaper, I know it should be possible but wanted to ask anyhow?
    Model 3:
    I am comparing these 2 models against THINKPAD X230.
    Any suggestions and enlightening thoughts on my above questions would be deeply appreciated.

    Please just let me know if the screen can be tilted to 180 degrees in Portege R935-ST3N02 

  • Looking for stock 3D models

    Hi everyone:
    I don't know much about 3D models so I might be formulating my question incorrectly (for which I apologize). I'm looking for a wireframe (mesh) only 3D models (RPF or RLA files), and I was wondering if they are provided somewhere as basic/stock 3D files?
    Here's an example of what I'm looking for (as a 2D screenshot):
    http://www.ivansanchez.com/blog/sentinel/zetaplusa.jpg
    http://www.foro3d.com/tutoriales/blender/blender-art-magazine-3d/blender-art-magazine-11/N urbs-Cad_files/File_048.jpg
    I need it for some (semi transparent) effect of a 3D object rotating in the background that will be largely zoomed in so I'm not very picky what that object will be.
    Thank you in advance!

    Den,
    If you aren't picky on what it is, as it will be zoomed in quite far -- you can just make another composition of a wireframe globe, or anything with the find edges effect, with others, and then scale it up, make it 3d, render in master composition, and fly around it.
    Or proxy to it, render it out with camera in that composition and then drag the rendered footage into the master composition.
    This might save you some money on buying a model.

  • Looking for driver of Model CT4

    i am looking for the driver for creatives sound blaster model CT4730.can anyone hlep me finding the driver for the card.

    imtiaz wrote:
    i am looking for the driver for creatives sound blaster model CT4730.can anyone hlep me finding the driver for the card.
    Hi
    Your card model can be indentified here
    Search this forum using the CT4730 and driver as a criteria --> you'll find some links to download pages.
    jutapa

  • HT5093 Hi all.  I'm looking to model long chain free fatty acids in 3D for use in iBooks Author.  Any help?

    Hi all.  I'm looking to model long chain free fatty acids in 3D for use in iBooks Author.  Any help? 
    What programs/widgets would serve my purpose? 

    I dont use it, but others seem to use Hype 2 and Google have a 3D freebie

  • Looking for expert who can highlight 3d model node in adobe reader with external program

    I need to select and highlight 3d model node in adobe reader with my program.from outside of adobe reader. it seems there is no out-of-box API in stndard SDK. I want to outsource this task fully or partly. If you have the solution or able to provide consultant in this area, please send message to me.

    You would indeed need a plug-in to actually select and highlight but you can easily call attention to a part by temporarily changing the color via JavaScript which you can access from external applications.
    I can provide more specific advice if you explain the exact user interaction you're looking for. Is this a desktop application? Is the PDF in a browser? etc.
    J-

  • Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

    I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

    Hi,
    Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
    uggest contacting one of the Alliance members at:
    http://www.ni.com/alliance
    An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
    There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
    Some useful resources for your application are
    ni.com > NI Developer Zone > Development Library > Instrument Connectivity
    http:/
    /search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
    Hope this helps!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Looking for Dynamic IDM Scoping Model Examples

    I'm looking for some good white papers, books or blogs on designing organizational scoping models for IDM. Primaryly I'm looking for examples in the area of:
    * Dynamic User Scoping
    * Converting Matrix organizations into IDM Scoping Model
    * Converting Fluid organization Structures into an IDM Scoping Model.
    What I would like to see is the problem statement, the logic used to create the final IDM design, and the supporting workflow and rules used to support the final design.
    Because I have asked for the moon, I might as well ask for the rest of the planet system -- I would love have a working model to load and play with.
    Thanks

    I'm looking for some good white papers, books or blogs on designing organizational scoping models for IDM. Primaryly I'm looking for examples in the area of:
    * Dynamic User Scoping
    * Converting Matrix organizations into IDM Scoping Model
    * Converting Fluid organization Structures into an IDM Scoping Model.
    What I would like to see is the problem statement, the logic used to create the final IDM design, and the supporting workflow and rules used to support the final design.
    Because I have asked for the moon, I might as well ask for the rest of the planet system -- I would love have a working model to load and play with.
    Thanks

  • Remote opportunity, Looking for assistance in programming a transfer function model

     Hello,
    Please see attached transfer function model. I am looking for assistance in programming in Labview 2014. Inputs are coming through cRIO and into the model and the model is determining the value of certain outputs being sent back to the cRIO, please PM if you are interested and we can discuss in more detail. Thanks!
     

    Hello,
    I could help as I've done this sort of thing for many of my clients. Let me know what you would like done.
    Thanks.

Maybe you are looking for