Looking for MSI K8N Neo 'Spare part'

I have an MSI K8N Neo-FSR that I recently bought from Newegg.
Awesome board, very happy with it so far, BUT....it didn't come with the back plate! You know, the part that fits over the ports - USB, PS/2, serial, parallel, etc - that mounts to the PC's chasis?
Missing!
If anyone has a spare one that would fit a K8N Neo-FSR, I'd really appreciate them getting in touch with me! Email addy is in profile!

You can e-mail MSI Customer Service and ask them for one and they will more than likely send it to you. I bought a refurbished MSI motherboard last year and when I asked them for an I/O Shield, they asked if there was anything else I needed for my motherboard. They shipped it UPS and I got it in a couple of days (no charge to me). They're pretty good about standing behind thier stuff, so it's worth a shot.

Similar Messages

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

System setup advice for MSI K8N Neo 2 Platinum.

Here is the PC I'm putting together:
Enermax EG465P-VE Noisetaker PSU with 29A on combined 12v rail
5v=30A 3.3v=30A 12V1=18A and 12V2=18A (comb 12v=29A)
MSI K8N Neo 2 Plat
AMD 3000+ winchester Retail box (carefully replacing AMD shin etsu with Artic Silver 5)
WD 80GB 800JB 7200 rpm EIDE HD
OCZ 2 x 256 PC3200 Premier Dual Chan Memory (2.5-3-3-7) (List on MSI website as ok)
Matrox G400 max
adaptec 2930u scsi adapter
Pioneer 303S 6x scsi DVD rom
Umax 1200S scsi scanner
Plextor 24/10/40 EIDE CDRW
External USR robotics serial modem
Microsoft regular keyboard PS2
Logitech regular wheel mouse PS2
regular old 1.44 MB floppy drive
Installing Win XP Pro upgrade (have my 98SE CD)
In the future I will possibly ditch my scsi DVD rom and replace with NEC dual layer burner and replace Plextor CDRW with 52/32/52 CDRW/DVD ROM. For now I'm going with what I have.
No plans to overclock now if ever. Perhaps a small amount later. Maybe 2.0 ghz? Maybe no overclocking at all.
Not a gaming rig really, although I'll try the odd game at low resolution.
So is there anything I should do ahead of time? I am carefully installing the board in the case and everything that goes with it. What sort of configuration setups should I do? Do I flash to a more updated BIOS first? Do I leave onboard things un-activated first? How do I setup my memory? For instance, I may look for the best BIOS to start with and have it ready to use if I have problems. I may also use the nVidia drivers for onboard audio instead of the realtek drivers.
Not looking for all the answers, just feel free to point out any of the obvious which may save me time
thanx in advance for any help

There is a compatibility issue betwen the Matrox G series cards and the MSI Neo Platinum motherboards, which AFAIK, hasn't been solved yet. The problem seems to be a result of changes made in the newer versions of the MSI bios, however you may be stuck if you need a newer bios for the Winchester cpu. You can find out more if you do a search on Matrox in this forum.
Robert

Good reasons of update to 1.8 for msi k8n neo 2 ?

Ok the main think is that someone need to update the bios only if he want to solve spesific problem and this because the update prosses is not the most easy one and espsialy for non -expiriance people.well i always was flashing with official bios just because the OC is not my way since for soore there is streess for the system and for sure this can not last.
Any way now with all these good new motherboard a lot are claiming that the most of the time a newer bios is adding sometimes more performans or sometime poor
Sorry for all this intro but beside the official statement that solves the Temp problem (witch i do not have it .bios 1.5) is it worth it?
thank you.

Hi Makisst,
it's really down to how you feel about it. some (like me ) will update most of the time others stick. MSI tend to be very limited in setting out what the bios changes are. I usually track this thread Neo & Neo2 & Neo3 & Neo4 Bios Collection. For feedback, to see if it's worth it.
luck

Looking for nokia BH 217 spare parts

Hi All, i have same problem loosing my rubber, small part on the ear phone, can nokia help us where we can buy that part? or may be somebody give some information where we can order that part. I'm from Indonesia, and i need M size rubber. waiting reply soon from someone.. tks a lot

You will need to contact Nokia care or a Nokia care point in Indonesia, they may be able to order the parts for you. Parts cannot be provided through this forum.
http://www.nokia.com/id-id/dukungan/kontak/

Msi k8n neo platinum - The 1394 delete from bios device list

hi.
the line where 1394 was is now empty , i try everything i flash the bios and stuff
no luck for me???
it look like the 1394 onboard conroller is dead?

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

Bios from my Msi k8n Neo Platinum (socket 754)

Wich is the last beta bios from my Msi k8n Neo Platinum (socket 754) ?
And where download?
Thanks

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Help: MSI K8N Neo Platinum

I've had nothing but problems trying to get this system running properly at any overclocking selections. Can you please review my components and give me suggestions on how to improve my situation.
Currently my know problems are 1. The Mother Board will only read my (2) 200/Gig Hard drives as 127/Gigs. 2. Slighest overclocking & system won't boot up.
Components:
Processor: A64 3200+ NewCastle
MoBo: MSI K8N Neo Platinum
MSI K8N Neo Platinum
Ram: Kingston HyperX 2048 PC3200 400Mhz (2 x 1024MB)
Kinston Ram - Tiger Direct
Video: MSI N5900 Ultra-VTD 256
MSI 5900 Ultra
Hard Drives: (2) 200 Gig Seagates
Power: 500W Aspire
3DMark2001 SE Score: 6300
Ok, everything I bought I got because it said it had Overclocking capabilities. So far any attempts to O.C. the system won't boot up properly.
WHAT DO I DO?
Thoughts on my other components???

The first thing you need to do is tighten them memory timings you killing your a64's performance
try 2.5,3,2,8 t1 2.7v
Get the latest bios for the neo it is a truly fast board when set up right.
Your 3d mark 01 should be in the 15k to 20k range
If you are running 200gb hdds you need to run sp1 on windows xp as xp does not recognise drives over 137gb
run your pci at 67 or 68
drop your htt to 3x
before you try to over clock you system get it running well at stock speeds or you will end up in a mess, there is not much point o/cin if its not.
Msi neo need a bit of tweaking but it runs like a dream when you do.
All your parts look ok

Newb Question MSI K8N Neo Platinum.

okay i have my parts coming in for my first build ever(i'm nervous, but anxious at the same time) and i just got my MSI K8N Neo Platinum today, all the other parts will come in the next couple of days, cpu arrives next week i believe, specs:
Antec P-160WF
OCZ 520w
Athlon 3400+
mobo(above)
1g corsair
160 Samsung S-ATA HD
I've been going over the mobo manual and i'm confused. I'm not familiar with raid and never had a sata drive, do they go hand and hand? Meaning do i have to set up a raid to use the s-ata drive or do i just plug the sata drive into the mobo and everything will work, loading up windows xp and all? I don't want to use raid, but do i have to? i'm trying to make this build as simple as possible since it's my first time, i know this is probably a dumb question, i'm just new at this.....don't be surprised to see more dumb questions in the coming weeks! thanks.

Quote
Originally posted by onebyte
>>Meaning do i have to set up a raid to use the s-ata drive or do i just plug the sata drive into the mobo and everything will work, loading up windows xp and all?
In a word, no.
I've just fired up my first homebuilt last night. Joy! It's all went perfect on the first power-up. I'm in a similar position, and have a single SATA Hitachi Deskstar. Although I've not yet installed an OS, my understanding is that the Serial ATA interface will work just fine with a single drive. No multiple drive RAID is needed.
My understanding is that all you have to be sure to do is load the SATA drivers from the included diskette, by pressing F6 on boot up. Otherwise the drive won't be properly recognized by the bios. I haven't done this yet, and its still showing as an IDE drive in some places of my bios setup.
If I had it to do over again I doubt I'd spend the extra dollars to go SATA with a single HD. It adds another level of complexity in transferring things to the new machine, and - according to certain authorities -- doesn't really add the extra performance over an ATA 133 that I first thought it would. At least with a 7200 RPM drive, it seems that the 150 or 133 limits never come into play, as the drive's mechanical limitations are less than both... so it's not a bottleneck.
I'm still trying to decide the best way to transfer my Win xp OS and other MS Office programs and updates. I'm not sure if I can clone my PATA HD to the SATA, or if I do what problems I'd have to fix. I've been thinking about transferring a Ghost or Acronis True Image to the new machine and then doing a WinXP repair install to see if I can get everything working with a minimum of time and effort. I'm not sure what to expect, or if it will even work at all. Or if it does, if it will leave me with problems (registry, drivers, etc).
We'll soon see.
Good luck with the build. The only real headache I had, other than getting the HSF uniit on the processor, was trying to connect the case front panel wires for the USB, Firewire, and Audio out and IN jacks, to the mainboard headers. The case wires were single pins and were labeled differently that the MB header block pin assignments. I finally gave up on the audio and firewire, and just used the USB connections after modifying them -- removing the two extra ground wires on pins 9 and 10.
Just take your time and follow the directions. Spend some time looking at the way the heatsink and fan connect onto the processor. Doing that without messing up the thermal compound can be tricky, and the directions from AMD could be clearer on that score.
Again, good luck,
thanks for the info, let me know how it goes...by the sound of what rainz said it seems you don't need to put in that 3.5" floppy disk that came with the mobo, is that right, rainz? Let me know how your OS installs onebyte, i'm curious to know if the SATA gave you trouble or not, wish you luck!

Msi K8N Neo with Athlon 64 3200

I just recieved the parts today 1x Msi K8N Neo Mobo and 64 3200 procesor, so far ive only been running it a few hours and allready i have had a lot of problems with it, first off the temp of my cpu is at 64oc when idol, and about 72oc on full load, I have the Coolermaster Hyper6 KHC-V81 heatsink with 2 mounted fans, and im sure thats more then enough to cool any proccessor?? Next up after restarting the computer the mouse/keyboard do not work when you get back into windows. i have no idea why tried all sorts of problems such as reinstalling drivers, Next up the board reads the default clock speed at 2.2ghz, am i wrong but isnt it meant to be 2.0ghz, both in bios and windows, it also says that my cpu has 512kb l2 cache when it is meant to have 1mb.
Needless to say i am not a happy bunny
if any1 has any ideas on what could be causing this please let me know as soon as possible before i throw my rig out the window
P.s The multiplier is on defualt, but it is 11x, isnt it soposed to be 200X 10??

As with the K8T800 board, MS products have been a thorn in the side. Try some cheap-o mouse and keyboard until you get your system stabilized. Make sure your BIOS settings accept OS2 and Plug 'n Play...turn off legacy support. Make note of all BIOS settings and which ones are enabled/disabled.....'cause we will be looking for your assistance on a lot of initial boot-up questions! Thanks very much =DNA=

MSI K8N NEO Platinum Edition memory question

Hi there,
I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would like to increase my memory to 1.5 Gig but there seems to be a lot of issues?
I originally planned to buy an additional 512 Meg Corsair value select chip and place it in Bank 3 - is this acceptable?
I assue that i would have to drop the speed down to DDR 333 from 400, could anyone tell me how much of a difference this actually makes (when playing FPS games Doom3 etc..) ?
Any help would be greatly appreciated as i've been looking through both this forum and the Corsair one and i cant seem to find the answer.
thanks in advance !

Just note that there are combinations of two sticks that will also make the board run in DDR333 mode (see page 2-8 of the manual). For example, using two double-sided sticks in DIMM2 and DIMM3. I've actually managed to get it to work at DDR400 in those two slots, but it's not perfectly stable and overclocking diminishes drastically. Bottom line is the system will work fine when forced to DDR333...as long as you don't expect to overclock the RAM to any significant degree.

MSI K8N Neo Platinum | system freezes!

Hi,
I recently bougt a MSI K8N Neo Platinum and an A64 3200+ Clawhammer Boxed. I was looking forward to low temperatures and a stabile motherboard, but I haven´t been that blessed yet. During random cpu loads, I get system hang-ups. Wether it´s running iTunes, CS, Sisoft Sandra, FarCry or nothing at all, the system sometimes stops responding.
I´ve updated to 1.2 BIOS, and I´ve downloaded the unofficial 1.33 BIOS from this forum , haven´t tried it yet, though.
MSI Corecenter tells med that the CPU temp gets above 55 degrees under full load. Atually, I had up to 70 degrees until I installed a third case fan. But the sys temp reports from 45 to 50 degrees. And I guess this is the little "MSI"-marked heatsink´s fault. It gets burning hot.
Could the system temp be the cause of my hang-ups?
Hoping for tips and possible solutions.
Btw, sorry for my norwegian-english

Hi,
I recently bougt a MSI K8N Neo Platinum and an A64 3200+ Clawhammer Boxed. I was looking forward to low temperatures and a stabile motherboard, but I haven´t been that blessed yet. During random cpu loads, I get system hang-ups. Wether it´s running iTunes, CS, Sisoft Sandra, FarCry or nothing at all, the system sometimes stops responding.
I´ve updated to 1.2 BIOS, and I´ve downloaded the unofficial 1.33 BIOS from this forum , haven´t tried it yet, though.
MSI Corecenter tells med that the CPU temp gets above 55 degrees under full load. Atually, I had up to 70 degrees until I installed a third case fan. But the sys temp reports from 45 to 50 degrees. And I guess this is the little "MSI"-marked heatsink´s fault. It gets burning hot.
Could the system temp be the cause of my hang-ups?
Hoping for tips and possible solutions.
Btw, sorry for my norwegian-english

MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
I started a thread on the Hard OCP forums a few days ago. I did not know MSI had forums =)
Rather than re-typing, I may as well just post the link:
http://www.hardforum.com/showthread.php?t=934956
My issue is also similar to this one:
https://forum-en.msi.com/index.php?topic=83799.0
Thanks for the help.

ALL RIGHT, after almost FOUR months my issue is FINALLY resolved.
It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
OK, here is an update as to what I remember.
I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
I concluded that I could not make my PC 100% stable, but I could get it darn close. With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM). With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact. Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V. Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
Problem solved. Thanks for all the help.
I will continue to buy MSI in the future just because of these forums…and a good product of course!

MSI K8N Neo Platinum - CPU Cooler?

Hi there, this is my first post to the forum and hope that someone can help
Bascially I've just purchased a MSI K8N Neo Platinum mobo to use with an AMD 64 2800.
I'm wondering if I should use the stock CPU cooler or look to purchasing a cooler such as a Zalman? I want to keep the computer as quiet as possible.
I've recently read that it would be better to use the Cool and Quiet option with the stock CPU cooler instead?

Chris,
If you don't mind a used one, there are probably about a hundred thousand available ones from people in these forums who has upgraded their heatsinks, and that's about everyone
The problem is, we dont want to give them up. We bought the retail package with fan not because of the free heatsink/fan, but because of the 3 year warranty that you only get with said combo. To invoke the warranty, we'd have to return everything, including the heatsink/fan, so we hang on to it and let it collect dust.
So, for an aftermarket fan. If you don't plan to overclock, ever, the thermaltake silent boost K8 will do, although it is nowhere NEAR the 21dB that tt claims. They are known for shall we say, exaggerated claims. But it's certainly quieter than the stock HSF, and it's available everywhere.
Note that the "silent boost k8" is different from the "silent boost". The latter is for socket 462 I think.

Looking for MSI K8N Neo 'Spare part'

Similar Messages

Maybe you are looking for