Looking for opensparcT1 slowest rate simulation

Hi,
I've downloaded and ran opensparcT1 chip8_mini regression.
According to the regression report.log file, slowest rate simulation was *~190[Hz]*:
"./iob_int_disp_9:chip8_mini:chip8_mini:0/status.log:Cyc= 107199, Sec= 563.730, C/S= 190.2"
I'm looking for a slower rate testcase, *30[Hz]* and less. It should Probably be a chip testcase where all Interfaces are toggled extensively at the same time.
Is it available in opensparc T1 env?
what is the testcase name?
and finally,
How can I ran single testcase instead of full/mini regression?
Thanks for your help,
Yaniv.
Edited by: user13467445 on Dec 13, 2010 5:49 AM

Hi CalebC,
Using the PULSE_VOLTAGE component (Sources»Signal Voltage Sources), you can generate a pulsed source as you describe. The three attributes that sound of interest to you are:
Initial value: This is the "zero level" as mentioned in your question
Pulsed value: This is the "one level"
Delay Time: This is the turn-on delay.
The rest of your queries, such as those regarding photon density, sound contextual to your problem rather than a function that Multisim performs, I can't really help you there!
I hope this helps, good luck!
Tom
Applications Engineering, NI UK

Similar Messages

Looking for a 'Camera Viewfinder' simulator plugin

I remember an old plugin for iMovie that made the image look as if it was from a camcorder's viewfinder - with a red light, "REC" and everything framed in a box.
I can't find that in the new iMovie 6 effects. Might anyone know if/where such a thing exists? I didn't see it at the Geethree or iMovieplugins websites.
Thanks.

http://www.geethree.com/slick/galleries/d_v1.html
Effects, "Camcorder"...

Looking for input on how Aperture rates when compared to Adobe Photoshop

Hi i am kind of new to Mac and have not bought any good photo editing programs yet i am looking for someone that has used both aperture and photoshop to help me make my decision on which one to buy. any input would help. thanks in advance

as RB said before, *you can't compare photoshop and aperture*. not in functionality and not in price.
actually: *you really need both*. there is no way around photoshop. most of your image processing can be done with aperture (or lightroom), however there will always be some photos that require the extra ps power, layers, etc... for retouching, blending etc.
compare:
you should compare +apple aperture with adobe lightroom+ for your image management and raw conversion - and - +photoshop cs3 with photoshop elements+ for image editing.
most here prefer aperture, however this is a question of personal preference. i have both on my machine, and while i like the improvements in adobe lightroom 2, i personally stick with aperture (i prefer the workflow and user interface of aperture).

New Build - Looking for Tips

So I have purchased the components listed in my Sig and getting ready to set everything up, just wanting to get some tips/advice on the best way to go about it.
My biggest question is concerning RAID, as this is the first time I have set one up. Any tips, guides, etc. on how best to accomplish this on my MB is appreciated. I am wanting to end up with a 1TB RAID 1+0 (4 500GB drives paired up, both pairs RAID 1, then one pair RAID 0 of the other pair). Am I correct in assuming it is best to plug only 2 in (SATA 1&2) setup the RAID 1 on those, then plug the other 2 in (SATA 3&4) and set those up as RAID 1, then tie everything together as with RAID 0? Or can I plug them all in and do it all at once? The instructions look fairly straight forward, just looking for some clarity and actual user input.
Do I need to update my BIOS? I haven't tried booting at all, so not sure what I am starting with, but I notice in the CPU compatibility the same CPU I have lists Version 10.4. Should I stick with what I have and only upgrade if I am having issues, or should I upgrade from the start.
I have a SATA Blu-Ray burner, and have seen a few things mentioning a SATA ODD coming up under RAID configurations. Is this an issue, is there a certain SATA port I should use to avoid this, certain settings I need to pay attention to, or does it matter?
Regarding memory, I read (in a sticky) that fewer memory sticks result in faster performance due to Dual Channels. I was under the impression that if all 4 slots were filled you would have 2 groups, each using Dual Channel. Am I incorrect in that? If faster performance (MHz-wise) is achieved by only using 2 sticks, will I get better overall results by removing 2 sticks (leaving only 4GB) or will the additional memory compensate for the speed loss? (The RAM is rated as being Dual Channel, if that makes a difference).
Does anyone have any general computer building tips? I have built a number of them before, but would like some input on the best/most efficient/fewest problems way is. All previous builds have been done with default configurations, if anyone has suggestions for some settings that they recommend those are welcome. I will be over-clocking at some point, depending on how things go and if there is any advantage to doing so from the start or waiting until the system is setup. I did notice this MB has a OC center as well as the Easy OC Switch. Any input or thoughts on those?
To sum it up, I am looking for as much input on getting everything set up as easily as possible, with the best settings without requiring a lot of adjustments. Any and all input is appreciated!

Quote from: Bas on 22-September-10, 15:45:56
Windows rating is rather silly, it's not the sum of the system but rather the slowest part that gives you this rating.
Yeah, I agree with the silliness of Windows final rating, however I do like to use the individual ratings as a sort of benchmark. The issue isn't the final rating, it the rating I am receiving for my processor, which is 4.1, and is the lowest rating on there.
From memory -
Processor - 4.1
RAM - 4.9
Graphics - 7.4
Gaming - 7.1
HD - 5.9
As a comparison, another computer with a 2.2GHz quad core processor, 4GB RAM, and single drive rates as follows:
Processor - 6.9
RAM - 7.2
Graphics - 4.8
Gaming - 6.1
HD - 5.9
With the components I have vs the comparison computer, I would expect CPU, RAM, and HD to all be higher, but they are lower or the same! So something somewhere is not right in my opinion.
Thanks for any feedback!

Looking for a Labview job. Any offers or suggestions?

Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.

Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request.

Looking for video sharing app to create .mov

Hello,
I hope I am in the right place and apologize if I am not.
I am looking for a foundation to build a video sharing application for Golfswing.com.
We need to allow our visitors to upload video of their swings (these clips are >3 second) in any video format then convert to quicktime for playback.
Why Quicktime you ask? Because Quicktime is the only player that allows frame by frame playback of the golfers swing. Like this,
http://www.golfswing.com/proswings/daly.htm
Any ideas, suggestions, directions, comments, endorsements are greatly appreciated.
Michael J.
Golfswing.com webmaster and owner

ffmpeg supports outputting .mov files. Not sure where you heard otherwise.
Sorry to flood this thread with this but FYI:
executing #ffmpeg -formats in terminal
outputs this (not support for mov file format):
FFmpeg version SVN-r9102, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --prefix=/opt/local --prefix=/opt/local --disable-vhook --mandir=/opt/local/share/man --enable-shared --enable-pthreads --enable-libmp3lame --enable-libogg --enable-libvorbis --enable-gpl --enable-libfaac --enable-libfaad --enable-xvid --enable-x264 --enable-liba52
libavutil version: 49.4.0
libavcodec version: 51.40.4
libavformat version: 51.12.1
built on Oct 24 2007 10:13:49, gcc: 4.0.1 (Apple Computer, Inc. build 5367)
File formats:
E 3g2 3gp2 format
E 3gp 3gp format
D 4xm 4X Technologies format
D MTV MTV format
DE RoQ Id RoQ format
D aac ADTS AAC
DE ac3 raw ac3
E adts ADTS AAC
DE aiff Audio IFF
DE alaw pcm A law format
DE amr 3gpp amr file format
D apc CRYO APC format
DE asf asf format
E asf_stream asf format
DE au SUN AU Format
DE avi avi format
D avs avs format
D bethsoftvid Bethesda Softworks 'Daggerfall' VID format
D c93 Interplay C93
E crc crc testing format
D daud D-Cinema audio format
D dsicin Delphine Software International CIN format
D dts raw dts
DE dv DV video format
E dvd MPEG2 PS format (DVD VOB)
D dxa dxa
D ea Electronic Arts Multimedia Format
DE ffm ffm format
D film_cpk Sega FILM/CPK format
DE flac raw flac
D flic FLI/FLC/FLX animation format
DE flv flv format
E framecrc framecrc testing format
DE gif GIF Animation
DE gxf GXF format
DE h261 raw h261
DE h263 raw h263
DE h264 raw H264 video format
D idcin Id CIN format
DE image2 image2 sequence
DE image2pipe piped image2 sequence
D ingenient Ingenient MJPEG
D ipmovie Interplay MVE format
DE m4v raw MPEG4 video format
D matroska Matroska file format
DE mjpeg MJPEG video
D mm American Laser Games MM format
DE mmf mmf format
*E mov mov format*
*D mov,mp4,m4a,3gp,3g2,mj2 QuickTime/MPEG4/Motion JPEG 2000 format*
E mp2 MPEG audio layer 2
DE mp3 MPEG audio layer 3
E mp4 mp4 format
D mpc musepack
DE mpeg MPEG1 System format
E mpeg1video MPEG video
E mpeg2video MPEG2 video
DE mpegts MPEG2 transport stream format
D mpegvideo MPEG video
E mpjpeg Mime multipart JPEG format
DE mulaw pcm mu law format
D mxf MXF format
D nsv NullSoft Video format
E null null video format
D nut nut format
D nuv NuppelVideo format
DE ogg Ogg format
E psp psp mp4 format
D psxstr Sony Playstation STR format
DE rawvideo raw video format
D redir Redirector format
DE rm rm format
E rtp RTP output format
D rtsp RTSP input format
DE s16be pcm signed 16 bit big endian format
DE s16le pcm signed 16 bit little endian format
DE s8 pcm signed 8 bit format
D sdp SDP
D shn raw shorten
D smk Smacker Video
D sol Sierra SOL Format
E svcd MPEG2 PS format (VOB)
DE swf Flash format
D thp THP
D tiertexseq Tiertex Limited SEQ format
D tta true-audio
D txd txd format
DE u16be pcm unsigned 16 bit big endian format
DE u16le pcm unsigned 16 bit little endian format
DE u8 pcm unsigned 8 bit format
D vc1 raw vc1
E vcd MPEG1 System format (VCD)
D vmd Sierra VMD format
E vob MPEG2 PS format (VOB)
DE voc Creative Voice File format
DE wav wav format
D wc3movie Wing Commander III movie format
D wsaud Westwood Studios audio format
D wsvqa Westwood Studios VQA format
D wv WavPack
DE yuv4mpegpipe YUV4MPEG pipe format
Codecs:
D V 4xm
D V D 8bps
D V VMware video
DEA aac
D V D aasc
DEA ac3
DEA adpcm_4xm
DEA adpcm_adx
DEA adpcm_ct
DEA adpcm_ea
DEA adpcmimadk3
DEA adpcmimadk4
DEA adpcmimaqt
DEA adpcmimasmjpeg
DEA adpcmimawav
DEA adpcmimaws
DEA adpcm_ms
DEA adpcmsbpro2
DEA adpcmsbpro3
DEA adpcmsbpro4
DEA adpcm_swf
D A adpcm_thp
DEA adpcm_xa
DEA adpcm_yamaha
D A alac
DEV D asv1
DEV D asv2
D A atrac 3
D V D avs
D V bethsoftvid
DEV bmp
D V D c93
D V D camstudio
D V D camtasia
D V D cavs
D V D cinepak
D V D cljr
D A cook
D V D cyuv
D A dca
D V D dnxhd
D A dsicinaudio
D V D dsicinvideo
DES dvbsub
DES dvdsub
DEV D dvvideo
D V dxa
DEV D ffv1
DEVSD ffvhuff
DEA flac
DEV D flashsv
D V D flic
DEVSD flv
D V D fraps
DEA g726
DEV gif
DEV D h261
DEVSDT h263
D VSD h263i
EV h263p
DEV DT h264
DEVSD huffyuv
D V D idcinvideo
D A imc
D V D indeo2
D V indeo3
D A interplay_dpcm
D V D interplayvideo
DEV D jpegls
D V kmvc
EV ljpeg
D V D loco
D A mace3
D A mace6
D V D mdec
DEV D mjpeg
D V D mjpegb
D V D mmvideo
DEA mp2
DEA mp3
D A mp3adu
D A mp3on4
D A mpc sv7
DEVSDT mpeg1video
DEVSDT mpeg2video
DEVSDT mpeg4
D A mpeg4aac
D VSDT mpegvideo
DEVSD msmpeg4
DEVSD msmpeg4v1
DEVSD msmpeg4v2
D V D msrle
D V D msvideo1
D V D mszh
D V D nuv
DEV pam
DEV pbm
DEA pcm_alaw
DEA pcm_mulaw
DEA pcm_s16be
DEA pcm_s16le
DEA pcm_s24be
DEA pcm_s24daud
DEA pcm_s24le
DEA pcm_s32be
DEA pcm_s32le
DEA pcm_s8
DEA pcm_u16be
DEA pcm_u16le
DEA pcm_u24be
DEA pcm_u24le
DEA pcm_u32be
DEA pcm_u32le
DEA pcm_u8
DEV pgm
DEV pgmyuv
DEV png
DEV ppm
D V ptx
D A qdm2
D V D qdraw
D V D qpeg
D V D qtrle
DEV rawvideo
D A real_144
D A real_288
DEA roq_dpcm
D V D roqvideo
D V D rpza
DEV D rv10
DEV D rv20
DEV sgi
D A shorten
D A smackaud
D V smackvid
D V D smc
DEV snow
D A sol_dpcm
DEA sonic
EA sonicls
D V D sp5x
DEV D svq1
D VSD svq3
DEV targa
D V theora
D V D thp
D V D tiertexseqvideo
DEV tiff
D V D truemotion1
D V D truemotion2
D A truespeech
D A tta
D V txd
D V D ultimotion
D V vc1
D V D vcr1
D A vmdaudio
D V D vmdvideo
DEA vorbis
D V vp3
D V D vp5
D V D vp6
D V D vp6f
D V D vqavideo
D A wavpack
DEA wmav1
DEA wmav2
DEVSD wmv1
DEVSD wmv2
D V wmv3
D V D wnv1
D A ws_snd1
D A xan_dpcm
D V D xan_wc3
D V D xl
EV xvid
DEV D zlib
DEV zmbv
Supported file protocols:
file: http: pipe: rtp: tcp: udp:
Frame size, frame rate abbreviations:
ntsc pal qntsc qpal sntsc spal film ntsc-film sqcif qcif cif 4cif
Motion estimation methods:
zero(fastest) full(slowest) log phods epzs(default) x1 hex umh iter
Note, the names of encoders and decoders dont always match, so there are
several cases where the above table shows encoder only or decoder only entries
even though both encoding and decoding are supported for example, the h263
decoder corresponds to the h263 and h263p encoders, for file formats its even
worse

STATSPACK. What to look for ?

my users have been complaining that the application is very slow. What do i need to look for in this report.
STATSPACK report for
DB Name DB Id Instance Inst Num Release Cluster Host
XXXX 629101424 XXXX 1 9.2.0.6.0 NO scheduprod-s
ol
Snap Id Snap Time Sessions Curs/Sess Comment
Begin Snap: 4527 12-Mar-07 15:02:05 81 231.9
End Snap: 4531 12-Mar-07 15:42:01 81 234.1
Elapsed: 39.93 (mins)
Cache Sizes (end)
~~~~~~~~~~~~~~~~~
Buffer Cache: 304M Std Block Size: 8K
Shared Pool Size: 608M Log Buffer: 512K
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 3,891.02 2,878.32
Logical reads: 865.79 640.45
Block changes: 22.12 16.36
Physical reads: 13.86 10.25
Physical writes: 0.61 0.45
User calls: 231.43 171.20
Parses: 48.95 36.21
Hard parses: 8.44 6.25
Sorts: 4.25 3.14
Logons: 0.15 0.11
Executes: 51.42 38.04
Transactions: 1.35
% Blocks changed per Read: 2.55 Recursive Call %: 17.42
Rollback per transaction %: 2.53 Rows per Sort: 55.75
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.13 In-memory Sort %: 100.00
Library Hit %: 91.94 Soft Parse %: 82.75
Execute to Parse %: 4.81 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 98.26 % Non-Parse CPU: 50.19
Shared Pool Statistics Begin End
Memory Usage %: 97.40 97.69
% SQL with executions>1: 18.64 31.84
% Memory for SQL w/exec>1: 17.60 31.65
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
CPU time 342 50.98
log file parallel write 7,798 138 20.59
log file sync 3,587 128 19.03
db file parallel write 193 29 4.39
control file parallel write 790 21 3.20
^LWait Events for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file parallel write 7,798 0 138 18 2.4
log file sync 3,587 0 128 36 1.1
db file parallel write 193 0 29 153 0.1
control file parallel write 790 0 21 27 0.2
SQL*Net more data to client 111,847 0 6 0 34.5
db file sequential read 432 0 2 5 0.1
db file scattered read 2,419 0 1 0 0.7
latch free 698 0 1 1 0.2
process startup 14 0 1 47 0.0
direct path read (lob) 14,912 0 1 0 4.6
SQL*Net break/reset to clien 920 0 0 0 0.3
control file sequential read 822 0 0 0 0.3
SQL*Net message from client 454,457 0 35,768 79 140.3
virtual circuit status 40,421 81 4,724 117 12.5
wakeup time manager 79 79 2,248 28461 0.0
jobq slave wait 264 252 765 2897 0.1
SQL*Net message to client 454,457 0 1 0 140.3
SQL*Net more data from clien 328 0 0 0 0.1
^LBackground Wait Events for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file parallel write 7,798 0 138 18 2.4
db file parallel write 193 0 29 153 0.1
control file parallel write 790 0 21 27 0.2
process startup 2 0 0 35 0.0
control file sequential read 556 0 0 0 0.2
rdbms ipc reply 3 0 0 1 0.0
latch free 2 0 0 0 0.0
rdbms ipc message 6,444 2,366 13,269 2059 2.0
smon timer 8 8 2,344 ###### 0.0
pmon timer 834 834 2,339 2804 0.3
^LInstance Activity Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Statistic Total per Second per Trans
CPU used by this session 34,169 14.3 10.6
CPU used when call started 33,176 13.9 10.2
CR blocks created 83 0.0 0.0
DBWR buffers scanned 0 0.0 0.0
DBWR checkpoint buffers written 1,459 0.6 0.5
DBWR checkpoints 0 0.0 0.0
DBWR free buffers found 0 0.0 0.0
DBWR lru scans 0 0.0 0.0
DBWR make free requests 0 0.0 0.0
DBWR revisited being-written buff 0 0.0 0.0
DBWR summed scan depth 0 0.0 0.0
DBWR transaction table writes 13 0.0 0.0
DBWR undo block writes 787 0.3 0.2
PX local messages recv'd 0 0.0 0.0
PX local messages sent 0 0.0 0.0
SQL*Net roundtrips to/from client 492,393 205.5 152.0
SQL*Net roundtrips to/from dblink 0 0.0 0.0
active txn count during cleanout 100 0.0 0.0
background checkpoints completed 0 0.0 0.0
background checkpoints started 0 0.0 0.0
background timeouts 2,898 1.2 0.9
branch node splits 0 0.0 0.0
buffer is not pinned count 1,617,141 674.9 499.3
buffer is pinned count 3,219,198 1,343.6 993.9
bytes received via SQL*Net from c 48,664,626 20,310.8 15,024.6
bytes received via SQL*Net from d 0 0.0 0.0
bytes sent via SQL*Net to client 380,182,385 158,673.8 117,376.5
bytes sent via SQL*Net to dblink 0 0.0 0.0
calls to get snapshot scn: kcmgss 370,472 154.6 114.4
calls to kcmgas 5,800 2.4 1.8
calls to kcmgcs 319 0.1 0.1
change write time 91 0.0 0.0
cleanout - number of ktugct calls 178 0.1 0.1
cleanouts and rollbacks - consist 0 0.0 0.0
cleanouts only - consistent read 15 0.0 0.0
cluster key scan block gets 88,031 36.7 27.2
cluster key scans 44,560 18.6 13.8
commit cleanout failures: block l 0 0.0 0.0
commit cleanout failures: buffer 0 0.0 0.0
commit cleanout failures: callbac 0 0.0 0.0
commit cleanout failures: cannot 0 0.0 0.0
commit cleanouts 16,509 6.9 5.1
commit cleanouts successfully com 16,509 6.9 5.1
commit txn count during cleanout 140 0.1 0.0
consistent changes 162 0.1 0.1
consistent gets 2,042,196 852.3 630.5
consistent gets - examination 578,365 241.4 178.6
cursor authentications 7,954 3.3 2.5
data blocks consistent reads - un 162 0.1 0.1
db block changes 52,993 22.1 16.4
db block gets 47,334 19.8 14.6
deferred (CURRENT) block cleanout 4,180 1.7 1.3
dirty buffers inspected 0 0.0 0.0
enqueue conversions 117 0.1 0.0
enqueue releases 32,269 13.5 10.0
enqueue requests 32,270 13.5 10.0
^LInstance Activity Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Statistic Total per Second per Trans
enqueue timeouts 0 0.0 0.0
enqueue waits 0 0.0 0.0
execute count 123,202 51.4 38.0
free buffer inspected 0 0.0 0.0
free buffer requested 19,766 8.3 6.1
hot buffers moved to head of LRU 23 0.0 0.0
immediate (CR) block cleanout app 15 0.0 0.0
immediate (CURRENT) block cleanou 5,664 2.4 1.8
index fast full scans (full) 6 0.0 0.0
index fetch by key 214,924 89.7 66.4
index scans kdiixs1 554,891 231.6 171.3
leaf node 90-10 splits 9 0.0 0.0
leaf node splits 61 0.0 0.0
logons cumulative 362 0.2 0.1
messages received 3,953 1.7 1.2
messages sent 3,953 1.7 1.2
no buffer to keep pinned count 0 0.0 0.0
no work - consistent read gets 894,670 373.4 276.2
opened cursors cumulative 116,168 48.5 35.9
parse count (failures) 9 0.0 0.0
parse count (hard) 20,231 8.4 6.3
parse count (total) 117,273 49.0 36.2
parse time cpu 17,018 7.1 5.3
parse time elapsed 17,319 7.2 5.4
physical reads 33,199 13.9 10.3
physical reads direct 0 0.0 0.0
physical reads direct (lob) 15,100 6.3 4.7
physical writes 1,459 0.6 0.5
physical writes direct 0 0.0 0.0
physical writes direct (lob) 0 0.0 0.0
physical writes non checkpoint 496 0.2 0.2
pinned buffers inspected 0 0.0 0.0
prefetch clients - default 0 0.0 0.0
prefetched blocks 15,247 6.4 4.7
prefetched blocks aged out before 0 0.0 0.0
process last non-idle time 2,396 1.0 0.7
recursive calls 116,941 48.8 36.1
recursive cpu usage 1,523 0.6 0.5
redo blocks written 20,871 8.7 6.4
redo buffer allocation retries 0 0.0 0.0
redo entries 29,618 12.4 9.1
redo log space requests 0 0.0 0.0
redo log space wait time 0 0.0 0.0
redo ordering marks 0 0.0 0.0
redo size 9,322,888 3,891.0 2,878.3
redo synch time 13,084 5.5 4.0
redo synch writes 3,587 1.5 1.1
redo wastage 1,028,916 429.4 317.7
redo write time 14,064 5.9 4.3
redo writer latching time 0 0.0 0.0
redo writes 3,899 1.6 1.2
rollback changes - undo records a 422 0.2 0.1
rollbacks only - consistent read 162 0.1 0.1
rows fetched via callback 350,472 146.3 108.2
session connect time 0 0.0 0.0
session logical reads 2,074,430 865.8 640.5
^LInstance Activity Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Statistic Total per Second per Trans
session pga memory 14,446,752 6,029.5 4,460.3
session pga memory max 24,898,104 10,391.5 7,687.0
session uga memory 17,184,593,312 7,172,200.9 5,305,524.3
session uga memory max 28,405,696 11,855.5 8,769.9
shared hash latch upgrades - no w 546,341 228.0 168.7
shared hash latch upgrades - wait 1 0.0 0.0
sorts (disk) 0 0.0 0.0
sorts (memory) 10,174 4.3 3.1
sorts (rows) 567,241 236.7 175.1
summed dirty queue length 0 0.0 0.0
switch current to new buffer 1,334 0.6 0.4
table fetch by rowid 1,958,222 817.3 604.6
table fetch continued row 1,912 0.8 0.6
table scan blocks gotten 143,317 59.8 44.3
table scan rows gotten 7,318,367 3,054.4 2,259.5
table scans (long tables) 15 0.0 0.0
table scans (short tables) 2,029 0.9 0.6
transaction rollbacks 421 0.2 0.1
user calls 554,503 231.4 171.2
user commits 3,157 1.3 1.0
user rollbacks 82 0.0 0.0
workarea executions - multipass 0 0.0 0.0
workarea executions - onepass 0 0.0 0.0
workarea executions - optimal 14,430 6.0 4.5
write clones created in backgroun 0 0.0 0.0
write clones created in foregroun 1 0.0 0.0
^LTablespace IO Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->ordered by IOs (Reads + Writes) desc
Tablespace
Av Av Av Av Buffer Av Buf
Reads Reads/s Rd(ms) Blks/Rd Writes Writes/s Waits Wt(ms)
USERS
17,588 7 0.1 1.9 69 0 0 0.0
UNDOTBLSPCE
0 0 0.0 802 0 0 0.0
PERFSTAT
136 0 14.2 1.0 315 0 0 0.0
SCHEDWIN_INDX
20 0 10.5 1.0 164 0 0 0.0
INDX
14 0 11.4 1.0 96 0 0 0.0
SYSTEM
0 0 0.0 13 0 0 0.0
File IO Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->ordered by Tablespace, File
Tablespace Filename
Av Av Av Av Buffer Av Buf
Reads Reads/s Rd(ms) Blks/Rd Writes Writes/s Waits Wt(ms)
INDX /opt/u01/oradata/XXXX/dbf/indx01.dbf
14 0 11.4 1.0 96 0 0
PERFSTAT /opt/u01/oradata/XXXX/dbf/perfstat01.dbf
136 0 14.2 1.0 315 0 0
SCHEDWIN_INDX /opt/u01/oradata/XXXX/dbf/schedwin_indx01.dbf
10 0 12.0 1.0 94 0 0
/opt/u02/oradata/XXXX/dbf/schedwin_indx02.dbf
10 0 9.0 1.0 70 0 0
SYSTEM /opt/u01/oradata/XXXX/dbf/system01.dbf
0 0 13 0 0
UNDOTBLSPCE /opt/u01/oradata/XXXX/dbf/undotblspce01.dbf
0 0 802 0 0
USERS /opt/u01/oradata/XXXX/dbf/users01.dbf
11,608 5 0.1 1.4 43 0 0
/opt/u02/oradata/XXXX/dbf/users02.dbf
2,369 1 0.5 3.4 14 0 0
/opt/u03/oradata/XXXX/dbf/users03.dbf
3,611 2 0.2 2.4 12 0 0
^LBuffer Pool Statistics for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> Standard block size Pools D: default, K: keep, R: recycle
-> Default Pools for other block sizes: 2k, 4k, 8k, 16k, 32k
Free Write Buffer
Number of Cache Buffer Physical Physical Buffer Complete Busy
P Buffers Hit % Gets Reads Writes Waits Waits Waits
D 37,715 99.1 2,073,831 18,097 1,459 0 0 0
Instance Recovery Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> B: Begin snapshot, E: End snapshot
Targt Estd Log File Log Ckpt Log Ckpt
MTTR MTTR Recovery Actual Target Size Timeout Interval
(s) (s) Estd IOs Redo Blks Redo Blks Redo Blks Redo Blks Redo Blks
B 160 34 1278 19692 19707 110592 19707
E 160 30 1056 17051 16555 110592 16555
Buffer Pool Advisory for DB: XXXX Instance: XXXX End Snap: 4531
-> Only rows with estimated physical reads >0 are displayed
-> ordered by Block Size, Buffers For Estimate (default block size first)
Size for Size Buffers for Est Physical Estimated
P Estimate (M) Factr Estimate Read Factor Physical Reads
D 32 .1 3,970 2.53 37,533,655
D 64 .2 7,940 2.07 30,675,635
D 96 .3 11,910 1.81 26,843,986
D 128 .4 15,880 1.67 24,744,049
D 160 .5 19,850 1.61 23,889,520
D 192 .6 23,820 1.57 23,290,550
D 224 .7 27,790 1.36 20,129,947
D 256 .8 31,760 1.16 17,216,468
D 288 .9 35,730 1.05 15,577,531
D 304 1.0 37,715 1.00 14,849,589
D 320 1.1 39,700 0.96 14,224,396
D 352 1.2 43,670 0.89 13,166,810
D 384 1.3 47,640 0.85 12,628,194
D 416 1.4 51,610 0.84 12,417,548
D 448 1.5 55,580 0.82 12,242,048
D 480 1.6 59,550 0.82 12,197,717
D 512 1.7 63,520 0.82 12,148,615
D 544 1.8 67,490 0.81 12,085,500
D 576 1.9 71,460 0.81 12,032,229
D 608 2.0 75,430 0.81 11,972,157
D 640 2.1 79,400 0.80 11,902,712
^LPGA Aggr Target Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> B: Begin snap E: End snap (rows dentified with B or E contain data
which is absolute i.e. not diffed over the interval)
-> PGA cache hit % - percentage of W/A (WorkArea) data processed only in-memory
-> Auto PGA Target - actual workarea memory target
-> W/A PGA Used - amount of memory used for all Workareas (manual + auto)
-> %PGA W/A Mem - percentage of PGA memory allocated to workareas
-> %Auto W/A Mem - percentage of workarea memory controlled by Auto Mem Mgmt
-> %Man W/A Mem - percentage of workarea memory under manual control
PGA Cache Hit % W/A MB Processed Extra W/A MB Read/Written
100.0 219 0
%PGA %Auto %Man
PGA Aggr Auto PGA PGA Mem W/A PGA W/A W/A W/A Global Mem
Target(M) Target(M) Alloc(M) Used(M) Mem Mem Mem Bound(K)
B 245 200 40.2 0.3 .7 11.8 88.2 12,544
E 245 200 40.8 0.3 .7 11.8 88.2 12,544
PGA Aggr Target Histogram for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> Optimal Executions are purely in-memory operations
Low High
Optimal Optimal Total Execs Optimal Execs 1-Pass Execs M-Pass Execs
8K 16K 14,257 14,257 0 0
16K 32K 124 124 0 0
32K 64K 62 62 0 0
64K 128K 14 14 0 0
128K 256K 8 8 0 0
256K 512K 5 5 0 0
512K 1024K 4 4 0 0
1M 2M 32 32 0 0
2M 4M 2 2 0 0
4M 8M 2 2 0 0
PGA Memory Advisory for DB: XXXX Instance: XXXX End Snap: 4531
-> When using Auto Memory Mgmt, minimally choose a pga_aggregate_target value
where Estd PGA Overalloc Count is 0
Estd Extra Estd PGA Estd PGA
PGA Target Size W/A MB W/A MB Read/ Cache Overalloc
Est (MB) Factr Processed Written to Disk Hit % Count
31 0.1 70,206.2 6,260.3 92.0 5
61 0.3 70,206.2 4,168.3 94.0 0
123 0.5 70,206.2 3,168.1 96.0 0
184 0.8 70,206.2 2,757.2 96.0 0
245 1.0 70,206.2 1,869.3 97.0 0
294 1.2 70,206.2 1,125.7 98.0 0
343 1.4 70,206.2 1,002.5 99.0 0
392 1.6 70,206.2 930.4 99.0 0
441 1.8 70,206.2 888.9 99.0 0
490 2.0 70,206.2 888.9 99.0 0
735 3.0 70,206.2 635.4 99.0 0
980 4.0 70,206.2 428.8 99.0 0
1,470 6.0 70,206.2 377.1 99.0 0
1,960 8.0 70,206.2 204.8 100.0 0
^LRollback Segment Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->A high value for "Pct Waits" suggests more rollback segments may be required
->RBS stats may not be accurate between begin and end snaps when using Auto Undo
managment, as RBS may be dynamically created and dropped as needed
Trans Table Pct Undo Bytes
RBS No Gets Waits Written Wraps Shrinks Extends
0 13.0 0.00 0 0 0 0
1 856.0 0.00 224,282 0 0 0
2 965.0 0.00 473,740 1 0 0
3 1,304.0 0.00 565,018 1 0 1
4 859.0 0.00 258,906 1 0 0
11 886.0 0.00 345,162 0 0 0
12 1,332.0 0.00 546,236 1 0 0
13 841.0 0.00 229,950 1 0 0
14 797.0 0.00 215,582 0 0 0
15 1,252.0 0.00 349,772 2 1 1
16 850.0 0.00 222,894 1 0 0
^LRollback Segment Storage for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->Optimal Size should be larger than Avg Active
RBS No Segment Size Avg Active Optimal Size Maximum Size
0 385,024 0 385,024
1 22,142,976 11,545,361 100,786,176
2 4,317,184 680,223 51,503,104
3 4,317,184 684,561 142,729,216
4 3,268,608 685,593 50,454,528
11 11,657,216 3,215,066 167,895,040
12 4,317,184 726,453 13,754,368
13 4,317,184 667,922 27,385,856
14 4,317,184 738,701 49,405,952
15 9,560,064 642,634 84,008,960
16 5,365,760 694,846 15,851,520
^LUndo Segment Summary for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> Undo segment block stats:
-> uS - unexpired Stolen, uR - unexpired Released, uU - unexpired reUsed
-> eS - expired Stolen, eR - expired Released, eU - expired reUsed
Undo Undo Num Max Qry Max Tx Snapshot Out of uS/uR/uU/
TS# Blocks Trans Len (s) Concurcy Too Old Space eS/eR/eU
13 754 8,780,184 149 1 0 0 0/0/0/0/0/0
Undo Segment Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> ordered by Time desc
Undo Num Max Qry Max Tx Snap Out of uS/uR/uU/
End Time Blocks Trans Len (s) Concy Too Old Space eS/eR/eU
12-Mar 15:38 166 ######## 68 1 0 0 0/0/0/0/0/0
12-Mar 15:28 204 ######## 3 1 0 0 0/0/0/0/0/0
12-Mar 15:18 214 ######## 3 1 0 0 0/0/0/0/0/0
12-Mar 15:08 170 ######## 149 1 0 0 0/0/0/0/0/0
^LLatch Activity for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Get Requests", "Pct Get Miss" and "Avg Slps/Miss" are statistics for
willing-to-wait latch get requests
->"NoWait Requests", "Pct NoWait Miss" are for no-wait latch get requests
->"Pct Misses" for both should be very close to 0.0
Pct Avg Wait Pct
Get Get Slps Time NoWait NoWait
Latch Requests Miss /Miss (s) Requests Miss
Consistent RBA 3,899 0.0 0 0
FOB s.o list latch 113 0.0 0 0
SQL memory manager latch 4 0.0 0 790 0.0
SQL memory manager worka 66,516 0.0 0 0
active checkpoint queue 980 0.0 0 0
archive control 89 0.0 0 0
archive process latch 48 0.0 0 0
cache buffer handles 392 0.0 0 0
cache buffers chains 3,696,307 0.0 0.0 0 34,306 0.0
cache buffers lru chain 21,217 0.0 0.0 0 21,384 0.0
channel handle pool latc 106 0.0 0 0
channel operations paren 1,773 0.0 0 0
checkpoint queue latch 48,252 0.0 0 1,219 0.0
child cursor hash table 144,268 0.0 0.0 0 0
dml lock allocation 10,464 0.0 0 0
dummy allocation 724 0.0 0 0
enqueue hash chains 64,677 0.0 0.0 0 0
enqueues 77,340 0.0 0.2 0 0
event group latch 52 0.0 0 0
global tx hash mapping 21 0.0 0 0
hash table column usage 126 0.0 0 491,356 0.0
job workq parent latch 0 0 8 0.0
job_queue_processes para 43 0.0 0 0
kmcptab latch 79 0.0 0 0
kmcpvec latch 0 0 79 0.0
ktm global data 8 0.0 0 0
kwqit: protect wakeup ti 79 0.0 0 0
lgwr LWN SCN 4,217 0.0 0.0 0 0
library cache 1,798,405 0.3 0.0 0 47,204 0.9
library cache load lock 2,480 0.0 0 0
library cache pin 879,035 0.0 0.0 0 0
library cache pin alloca 603,279 0.0 0.0 0 0
list of block allocation 381 0.0 0 0
loader state object free 27,796 0.0 0 0
messages 18,381 0.0 0.0 0 0
mostly latch-free SCN 4,220 0.1 0.0 0 0
multiblock read objects 5,328 0.0 0 0
ncodef allocation latch 40 0.0 0 0
post/wait queue 5,523 0.0 0 3,587 0.0
process allocation 52 0.0 0 52 0.0
process group creation 106 0.0 0 0
redo allocation 37,748 0.0 0 0
redo copy 0 0 29,635 0.0
redo writing 14,340 0.0 0 0
row cache enqueue latch 11,874,838 0.0 0.0 0 0
row cache objects 11,876,412 0.0 0.0 0 81 0.0
sequence cache 1,113 0.0 0 0
session allocation 117,333 0.0 0.0 0 0
session idle bit 1,141,301 0.0 0.0 0 0
session switching 40 0.0 0 0
^LLatch Activity for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Get Requests", "Pct Get Miss" and "Avg Slps/Miss" are statistics for
willing-to-wait latch get requests
->"NoWait Requests", "Pct NoWait Miss" are for no-wait latch get requests
->"Pct Misses" for both should be very close to 0.0
Pct Avg Wait Pct
Get Get Slps Time NoWait NoWait
Latch Requests Miss /Miss (s) Requests Miss
session timer 834 0.0 0 0
shared pool 1,804,311 0.2 0.1 1 0
sim partition latch 0 0 8 0.0
simulator hash latch 110,923 0.0 0 0
simulator lru latch 71 0.0 0 1,975 0.0
sort extent pool 48 0.0 0 0
spilled msgs queues list 79 0.0 0 0
transaction allocation 15,341 0.0 0 0
transaction branch alloc 61 0.0 0 0
undo global data 14,952 0.0 0 0
user lock 1,400 0.0 0 0
virtual circuit buffers 413,970 0.0 0.0 0 0
virtual circuit queues 187,775 0.0 0.0 0 0
virtual circuits 80,454 0.0 0 0
^LLatch Sleep breakdown for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> ordered by misses desc
Get Spin &
Latch Name Requests Misses Sleeps Sleeps 1->4
library cache 1,798,405 4,608 221 4390/215/3/0
/0
shared pool 1,804,311 3,662 477 3196/455/11/
0/0
enqueues 77,340 5 1 4/1/0/0/0
^LLatch Miss Sources for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
enqueues ksqgel: create enqueue 0 1 1
library cache kgllkdl: child: cleanup 0 14 45
library cache kglupc: child 0 9 37
library cache kglic 0 7 4
library cache kglpin: child: heap proces 0 7 2
library cache kglhdgc: child: 0 5 10
library cache kglpndl: child: after proc 0 5 2
library cache kglobpn: child: 0 3 9
library cache kglpndl: child: before pro 0 3 9
library cache kgldti: 2child 0 2 0
library cache kglpnc: child 0 2 53
library cache kglhdgn: child: 0 1 30
shared pool kghalo 0 302 127
shared pool kghfrunp: alloc: wait 0 124 0
shared pool kghfrunp: clatch: nowait 0 89 0
shared pool kghfrunp: clatch: wait 0 74 10
shared pool kghupr1 0 47 339
shared pool kghalp 0 4 4
^LDictionary Cache Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Pct Misses" should be very low (< 2% in most cases)
->"Cache Usage" is the number of cache entries being used
->"Pct SGA" is the ratio of usage to allocated size for that cache
Get Pct Scan Pct Mod Final
Cache Requests Miss Reqs Miss Reqs Usage
dc_histogram_defs 2,118,905 0.0 0 0 2,547
dc_object_ids 3,216,369 0.0 0 0 701
dc_objects 22,189 0.2 0 0 456
dc_profiles 349 0.0 0 0 1
dc_rollback_segments 350 0.0 0 0 22
dc_segments 505,804 0.0 0 0 1,085
dc_sequences 18 0.0 0 18 2
dc_tablespaces 30,016 0.0 0 0 12
dc_user_grants 969 0.0 0 0 22
dc_usernames 21,334 0.0 0 0 7
dc_users 19,245 0.0 0 0 23
Library Cache Activity for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Pct Misses" should be very low
Get Pct Pin Pct Invali-
Namespace Requests Miss Requests Miss Reloads dations
BODY 64 0.0 64 0.0 0 0
CLUSTER 340 0.6 348 1.1 0 0
INDEX 237 0.0 237 0.0 0 0
SQL AREA 116,941 6.6 391,824 10.0 11,529 2
TABLE/PROCEDURE 47,075 0.2 108,992 1.0 732 0
TRIGGER 746 1.5 746 1.5 0 0
^LShared Pool Advisory for DB: XXXX Instance: XXXX End Snap: 4531
-> Note there is often a 1:Many correlation between a single logical object
in the Library Cache, and the physical number of memory objects associated
with it. Therefore comparing the number of Lib Cache objects (e.g. in
v$librarycache), with the number of Lib Cache Memory Objects is invalid
Estd
Shared Pool SP Estd Estd Estd Lib LC Time
Size for Size Lib Cache Lib Cache Cache Time Saved Estd Lib Cache
Estim (M) Factr Size (M) Mem Obj Saved (s) Factr Mem Obj Hits
352 .6 375 15,062 574,744 1.0 97,562,016
416 .7 439 17,218 576,603 1.0 97,833,828
480 .8 503 19,153 578,104 1.0 98,135,338
544 .9 566 21,093 579,653 1.0 98,617,796
608 1.0 619 22,788 581,195 1.0 99,127,166
672 1.1 681 30,538 583,092 1.0 99,741,869
736 1.2 735 34,290 587,030 1.0 100,967,607
800 1.3 798 38,022 594,101 1.0 103,269,753
864 1.4 858 42,002 602,185 1.0 106,482,793
928 1.5 922 44,110 606,329 1.0 108,314,799
992 1.6 985 48,321 608,336 1.0 109,245,477
1,056 1.7 1,049 50,582 609,325 1.0 109,697,087
1,120 1.8 1,113 53,649 610,059 1.0 110,009,531
1,184 1.9 1,177 60,950 610,680 1.1 110,251,066
1,248 2.1 1,248 65,824 611,135 1.1 110,424,882
^LSGA Memory Summary for DB: XXXX Instance: XXXX Snaps: 4527 -4531
SGA regions Size in Bytes
Database Buffers 318,767,104
Fixed Size 732,784
Redo Buffers 811,008
Variable Size 771,751,936
sum 1,092,062,832
SGA breakdown difference for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Pool Name Begin value End value % Diff
java free memory 33,554,432 33,554,432 0.00
large free memory 64,089,912 63,913,256 -0.28
large session heap 3,018,952 3,195,608 5.85
shared 1M buffer 2,098,176 2,098,176 0.00
shared Checkpoint queue 513,280 513,280 0.00
shared FileOpenBlock 1,191,104 1,191,104 0.00
shared KGK heap 7,000 7,000 0.00
shared KGLS heap 2,993,944 3,009,616 0.52
shared KQR L PO 1,312,072 1,322,312 0.78
shared KQR L SO 156,688 156,688 0.00
shared KQR M PO 2,065,256 2,065,256 0.00
shared KQR M SO 86,616 86,616 0.00
shared KQR S SO 8,216 8,216 0.00
shared KQR X PO 2,576 2,576 0.00
shared KSXR pending messages que 853,952 853,952 0.00
shared KSXR receive buffers 1,034,000 1,034,000 0.00
shared MTTR advisory 74,672 74,672 0.00
shared PL/SQL DIANA 616,680 616,880 0.03
shared PL/SQL MPCODE 764,312 611,264 -20.02
shared PLS non-lib hp 2,088 2,088 0.00
shared PX subheap 24,336 24,336 0.00
shared XDB Schema Cac 5,927,720 5,927,720 0.00
shared dictionary cache 3,229,952 3,229,952 0.00
shared errors 384 384 0.00
shared event statistics per sess 1,923,040 1,923,040 0.00
shared fixed allocation callback 472 472 0.00
shared free memory 17,476,144 15,506,552 -11.27
shared joxs heap init 4,240 4,240 0.00
shared library cache 68,887,280 65,624,984 -4.74
shared message pool freequeue 771,984 771,984 0.00
shared miscellaneous 49,162,528 49,205,880 0.09
shared parameters 55,784 35,760 -35.90
shared sim memory hea 328,304 328,304 0.00
shared sql area 509,408,184 514,745,136 1.05
shared subheap 100,040 100,040 0.00
shared table definiti 5,104 3,648 -28.53
shared trigger defini 544 544 0.00
shared trigger inform 1,800 1,800 0.00
shared trigger source 168 168 0.00
buffer_cache 318,767,104 318,767,104 0.00
fixed_sga 732,784 732,784 0.00
log_buffer 787,456 787,456 0.00
^Linit.ora Parameters for DB: XXXX Instance: XXXX Snaps: 4527 -4531
End value
Parameter Name Begin value (if different)
aq_tm_processes 1
background_dump_dest /opt/oracle/admin/XXXX/bdump
compatible 9.2.0.0.0
control_files /opt/u01/oradata/XXXX/ctl/cont
core_dump_dest /opt/oracle/admin/XXXX/cdump
db_block_size 8192
db_cache_size 318767104
db_domain
db_file_multiblock_read_count 8
db_name XXXX
dispatchers (PROTOCOL=TCP)
fast_start_mttr_target 160
hash_join_enabled TRUE
instance_name XXXX
java_pool_size 33554432
job_queue_processes 10
large_pool_size 67108864
log_archive_start TRUE
open_cursors 300
oracle_trace_enable TRUE
pga_aggregate_target 256901120
processes 150
query_rewrite_enabled FALSE
remote_login_passwordfile EXCLUSIVE
shared_pool_size 637534208
sort_area_size 524288
star_transformation_enabled FALSE
timed_statistics TRUE
trace_enabled FALSE
undo_management AUTO
undo_retention 10800
undo_tablespace UNDOTBLSPCE
user_dump_dest /opt/oracle/admin/XXXX/udump
End of Report
Message was edited by:
pinjam

Start from low hang fruite.
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file parallel write 7,798 0 138 18 2.4
db file parallel write 193 0 29 153 0.1
control file parallel write 790 0 21 27 0.2
process startup 2 0 0 35 0.0
control file sequential read 556 0 0 0 0.2
rdbms ipc reply 3 0 0 1 0.0
latch free 2 0 0 0 0.0
rdbms ipc message 6,444 2,366 13,269 2059 2.0
smon timer 8 8 2,344 ###### 0.0
pmon timer 834 834 2,339 2804 0.3
-------------------------------------------------------------Since you have numours logfile and control file related top wait events. Consider move them to a fast disk or seperate them from other datafiles if you haven't done so.
Also there's part of your statspack missing, like Top SQL

Looking for a partner

To Whom It May Concern:
Thanks for reading my post. Maybe it's this down economy, or maybe I'm just tired of being tied to an hourly rate, but after several years of careful contemplation I've finally decided to branch out on my own.
If you're at all like me and share a strong interest in starting something of "your" own, we might just make a good match.
Before responding, please be:
1. Currently employed and not looking for work, or not employed but can survive for 12 months without an income.
2. Interested in becoming an entrepreneur but still seeking the right idea.
3. Have an architect level background in enterprise application development but aren't afraid to get your hands dirty. You also have a resume and credentials to prove it.
4. Independent and not affiliated with any groups, organizations, or solicitors.
5. Have strong communication skills, and though you'd hate to be considered a sales guy, you can definitely do some heavy persuading.
6. Are a US resident.
If you fit the bill, and want to learn more, go to www.soupnuts.com
Warm regards,
SoupNuts!

warning!!!!!!! warning!!!!!!! looks like a sales gimmick to me. selling avon on the internet?

What to look for in a battery

I was browsing ebay for a batter and charger to pick up while I wait for my Incredible to get here. I'm curious if there are specific specs or anything I need to look for in a replacement battery.

it's not "supposedly" a risk, it is a risk, cheap batteries are not just name brand batteries with a different lable, they are inferiorly made, and can have a lower output than they are supposed to or they will have inferior regulation circuitry and will overheat (for one of many reasons) and start on fire. **bleep** ion batteries rely on this circuitry to keep charge/discharge rates low enough and keep them from discharging all the way. any of these conditions will cause the fire these batteries were notorious for just a few years ago.

Looking for crm software for mac

I am trying to figure out which crm software is the market leader for mac? Which offers ease of use for new users?

The best suggestion I could give you wouldn't be necessarily a Mac app, but its a cloud CRM written in HTML5 and CSS 3, so it's accessible from any browser and they have native mobile and desktop apps coming soon.
It's JobNimbus. By far the easiest CRM software to use, which is something you really have to look for. Everyone CRM says they're easy to use, but the industry in general just drowns in bad adoption rate (see here) because of the terrible software they make, so you have to get in and try it out.
JobNimbus has a free 30-day trial of their Pro version, but you can still use it after that as a Basic version with less features. It's also not just CRM, but also project management, so it makes it even easier to streamline your workflow.
Go ahead and check it out, maybe try it for a couple days and see what you think: http://www.jobnimbus.com. Their customer service rocks too. I'm using it and can tell you, you won't be disappointed.

Looking for a app that will go out and get all my credit card balances.

I am looking for a App that can go on all the web sites for my Credit Cards and download the balance Interest Rate Payment.....
Anyone know of a good one?

I recommend that instead of working on an iPad application you get a good web programmer in and set up a web-facing system that can be used from anything with a web browser -- an iPad, a smartphone, a laptop or a desktop. Then your employees can access the system from any computer with a web browser, and you don't need to employ an expensive specialist programmer to produce a system which is useless for devices made by other manufacturers. The only requirement for use will be that your devices must in range of either WiFi or a phone signal.
It will also mean that if you need to change your software at any time you only have to change one copy, back at headquarters, rather than update an App on every individual iPad.
Apple's web browsers (including the ones built into iDevices) allow a web site to request the user's location, so people using an iPad should be able to do the things you have asked for.

Looking for a simple drag & drop apps to slow motion a Video?

I'm doing a project with school kids that involves numerous iterations on building small structures out of balsa wood and taking them to breaking point to discover where the weakness lies in the design.
I'm a FCPx and imovie user, but would really like to find an application where I can just take a video clip and run the app to take the video clip and slow it down.
I'll have to do this maybe hundreds of times and do it almost real time while showing the kids.
I'm looking for someting quick and easy to use..
Does anyone know of such an app.. 'easy slowmotion' or someting like that.
Thanks fo any help!

I would say, iMovie or FCPX are simple slowmo generators…
I'm doing a lot of sports-video - so, slowmo is of highest interest here.
Best practice and still unmatched: find a cam, which records in HFR/high frame rates; there are some cheap (99$) Canon compact cameras (still with ability to record video), which offer 120fps up to 1000fps … but in a small resolutions.
There's no need to 'process' such recordings, just playback with normal speed 25/30fps = slowmo.
ALL other methods to create slowmo out of 25/30fps recordings involve processing!
… where should the additionally needed frames come from?
Features like OpticalFlow (FCPX, Twixtor) need tons of computation = no 'instant' effect.
So, when you have no access to a designated 'slowmo cam', the fastest, only and most simple method is, to playback frame by frame: open your video with QuicktimePlayer.app, and step/hit cursor-right repeatedly.

Looking for a specific feature in an FTP Client

Hello!
I am looking for a "simple" feature in any FTP client for OS X.
I have tried Fetch, Transmit, CyberDuck and Interarchy 7.x and none had the ability to throttle uploads/downloads. I work with a limited bandwidth and sometimes have to download files (or upload) in the background but at a very slow speed (because the peer has a poor connection).
None of these nice (and they are nice!) ftp programs can do this. I have to either use wget via the command line (wget --limit-rate=xx) or use Total Commander for Windows inside a Parallels Virtual Machine.
Does anybody know about a Mac FTP client that can throttle and enqueue items easily?
Thanks in advance!

Look at "lftp". It as about a zillion parameters that can be set. One of them is "net:limit-total-rate"
Quoted from the Docs....
limit transfer rate of all connections in sum. 0 means unlimited. You can specify two numbers separated by colon to limit download and upload rate separately. Note that sockets have receive buffers on them, this can lead to network link load higher than this rate limit just after transfer beginning. You can try to set net:socket-buffer to relatively small value to avoid this.
Find lftp here lftp.yar.ru It is also in thr Fink archive. http://fink.sourceforge.net/

Looking for a program

Hi guys and gals. Im looking for a program or a way to make a dvd with chapters. I have 2 xvid files that equal 1.4gb's. I'm doing it in toast 8 but it says theres not enough room to do this, and i cant figure out why. Is there another way i can convert it to dvd with chapters. It doesn't matter Manuel or auto chapter input,as long as it has chapters.
Thanx

Toast has no problem with room. I use Toast to generate the M2V and AC3 files from all sorts of video clips and routinely make DVD images (not DVD's - image files) that are 30-50 GB e.g. 15-20 hours long. I delete the image after encoding, as I need what winds up in Roxio Converted items.
However if you are making a physical DVD and you have exceeded the maximum capacity then it won't work - what colour is the indicator around the red burn button? If yellow or red it exceeds the space available.
Manually set the encoding rate to a lower rate then see if the indicator is green. Default rates are quite high a lot higher than they need to be. You can make a DVD with 2hours and 20 minutes at a 4 mbps encode rate. Which frankly is pretty adequate with source video like WMV, XVid, DivX etc.
Note the 1.4Gb size of the Xvid originals makes no difference - how much TIME do they equal in total?
Another method if you are not able to understand the encoding settings - make a DVD image first. Mount that image then make an image again from it - rename the new image, this time Toast will ask - Double layer or single layer? Pick single and it will reencode a new image which you burn later at exactly 4.32GB to fit.
Note as to chapters just set to every 3, 4,5 minutes etc. and it will do them for you. Note as well each Xvid original will be a title on the DVD so you will have 2 titles and they wil have as many chapters as the setting will allow.
If you want one long movie from the two, combine them with QT Pro first, save as a self contained MOV file and use that one file.

Looking for a select block

Hello!
I'm looking for a select block but I don't find it.. I want a block with four inputs,an input select, and one output. The output variable catch the value of the input variable which his position agree with the value of input select.
Ex.: I have input_1=20 input_2=30 input_3=40 input_4=50 and input select is 2. Output value is 30.
Exist a block like this? If not exist, which eay you try to build it? Thanks!
Thank you
Larson

Hi Larson
There is a select block - it is called "case structure" and is located in the structures palette (where the loops are).
You can use this structure to switch between different cases. You can have different types to control them.
Here is a simple example of what you want to do.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Case.vi ‏17 KB

Looking for opensparcT1 slowest rate simulation

Similar Messages

Maybe you are looking for