Looking for opinions - anyone using the iPhone in NYC?

I am NOT an iPhone owner yet. But, have been considering buying one. I live/work in NYC and am using a Treo 650 with T-Mobile. The service is so poor that I no longer have a signal in my office or my apt. I am seriously considering the iPhone and wanted to know how other NYers are managing with the iPhone and AT&T service. Would love to hear your opinions.
Thanks!

I live in Manhattan on the east side, near Gramercy.
I was previously on T-Mobile. I had almost no signal in my apt. with T-Mo. With AT&T, I have full bars. However, in the ad agency I freelance in on occasion, my signal with AT&T is worse.
But that may mean nothing to you. What it comes down to is where you live/work and your proximity to an AT&T tower in those locations. Unless you can get testimonials from another user(s) in your exact living/working location(s), no amount of anecdotal evidence from other people anywhere else around the city will guarantee you a good or bad signal. This is especially true of the EDGE network, which varies from block to block. You can turn a corner and drop/gain 100kbps.
My recommendation would be to find a neighbor or co-worker on AT&T, take the sim card out of their phone, put it in yours and note the signal quality. Be sure to do this as close as possible to where you live/work. Using your phone instead of theirs will provide you with a test control. Of course, if you could get your hands on a friend's iPhone, even better.

Similar Messages

I am looking for somebody whoo uses the deploytool of Sun.

Hello my name is Jurgen,
I am looking for somebody who uses the deploytool of the J2EE SDK 1.4 full installation. I am having some trouble with the deploytool.
Does somebody know an alternative for the deploytool of Sun ?
Thanks a lot !
Jurgen

Correction:
In the current version of the tutorial we use deploy.
However, we will be updating the tutorial next week
with instructions for using asant to package and
deploy.We use deploytool to package and deploy in the current version.
We will add instructions to package and deploy using asant in a version scheduled for release on June 15.

How to look for my ipod using the serial number

Looking for my stolen ipod using my serial number. Where do I go to do this?

You do not. The SN will only help identify the iPod as yours if it is recovered.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product

WebLogic looking for class file using the wrong case

During my ant build, I precompile my JSPs using weblogic.jspc. All of the jars and wars are packaged into an ear and deployed to WebLogic 8.1 on Linux. When I access one of our normal screens, everything is good. Things go wrong when I try to access one of our help screens. We have a base help file that includes another file based on the screen code passed to it. The screen code is used in combination with a HashMap to look up the correct JSP to include. This part goes fine. But when the JSP is included, I get the following error. The best I can figure is that the class file is in mixed case (i.e., SampleHelp00.jsp and SampleHelp00.class), but Weblogic is looking for samplehelp00.class.
I'm not even where I should begin looking to solve this. Anyone have any ideas?
----- BEGIN STACKTRACE -----
javax.servlet.jsp.JspException:
[HTTP:101249][ServletContext(id=70634941,name=grp,context-path=/grp)]:
Servlet class jsp_servlet._help.__samplehelp00 for servlet
/help/SampleHelp00.jsp could not be loaded because the requested class was not found in the classpath
/usr/share/weblogic/weblogic81/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/wf-web-sys.wftesttest.war:
/weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/Struts_Validator-20010702.jar:
/weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/struts.jar:
/weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/taglibs-session.jar:
/weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/WEB-INF/lib/wf.wftesttest.jar:
/weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp/jarfiles/_wl_cls_gen.jar:
/weblogic81sp5/weblogic81sp5/config/wftesttest/webSysServer02/.wlnotdelete/extract/webSysServer02_wf-web-sys.wftesttest_grp.
java.lang.ClassNotFoundException:
jsp_servlet._help.__samplehelp00.
at org.apache.struts.taglib.template.InsertTag.doEndTag()I(InsertTag.java:149)
at jsp_servlet.__su_hl0._jspService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(__su_hl0.java:289)
at weblogic.servlet.jsp.JspBase.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava/lang/Object;(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lweblogic/servlet/internal/FilterChainImpl; )V(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(ServletStubImpl.java:348)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(RequestDispatcherImpl.java:328)
at org.apache.struts.action.ActionServlet.processForward(Lorg/apache/struts/action/ActionMapping;Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )Z(ActionServlet.java:1847)
at org.apache.struts.action.ActionServlet.process(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(ActionServlet.java:1568)
at org.apache.struts.action.ActionServlet.doGet(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(ActionServlet.java:491)
at javax.servlet.http.HttpServlet.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(HttpServlet.java:740)
at com.clear2pay.ppp.util.ui.struts.ActionServlet.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse; )V(ActionServlet.java:138)
at javax.servlet.http.HttpServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava/lang/Object;(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Lweblogic/servlet/internal/FilterChainImpl; )V(ServletStubImpl.java:465)
at weblogic.servlet.internal.TailFilter.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Ljavax/servlet/FilterChain; )V(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(FilterChainImpl.java:27)
at com.clear2pay.ppp.util.ui.SetCharacterEncodingFilter.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;Ljavax/servlet/FilterChain; )V(SetCharacterEncodingFilter.java:150)
at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse; )V(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava/lang/Object;(WebAppServletContext.java:6987)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic/security/subject/AbstractSubject;Ljava/security/PrivilegedAction; )Ljava/lang/Object;(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction; )Ljava/lang/Object;(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic/servlet/internal/ServletRequestImpl;Lweblogic/servlet/internal/ServletResponseImpl; )V(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic/kernel/ExecuteThread; )V(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(Lweblogic/kernel/ExecuteRequest; )V(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:183)
at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread; )V(Unknown Source)
----- END STACKTRACE -----
Message was edited by:
cabuki

Ignore the part about precompiled JSPs being ignored on my development server. Turns out I had a stale cache. I cleared that out and now it recognizes the files.
The problem with that, is now I'm getting an Error 500 when I try to access the page.
----- BEGIN STACKTRACE -----
javax.servlet.jsp.JspException
     at org.apache.struts.taglib.template.InsertTag.doEndTag()I(InsertTag.java:149)
     at jsp_servlet.__su_h0._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(__su_h0.java:316)
     at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object; (ServletStubImpl.java:996)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl; )V(ServletStubImpl.java:419)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(ServletStubImpl.java:315)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(RequestDispatcherImpl.java:318 )
     at org.apache.struts.action.ActionServlet.processForward(Lorg.apache.struts.action.ActionMapping;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )Z(ActionServlet.java:1847)
     at org.apache.struts.action.ActionServlet.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(ActionServlet.java:1568 )
     at org.apache.struts.action.ActionServlet.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(ActionServlet.java:491)
     at javax.servlet.http.HttpServlet.service(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(HttpServlet.java:740)
     at com.clear2pay.ppp.util.ui.struts.ActionServlet.service(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse; )V(ActionServlet.java:138 )
     at javax.servlet.http.HttpServlet.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:996)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl; )V(ServletStubImpl.java:419)
     at weblogic.servlet.internal.TailFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain; )V(TailFilter.java:28 )
     at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(FilterChainImpl.java:27)
     at com.clear2pay.ppp.util.ui.SetCharacterEncodingFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain; )V(SetCharacterEncodingFilter.java:150)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse; )V(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6458 )
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction; )Ljava.lang.Object;(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction; )Ljava.lang.Object;(SecurityManager.java:118 )
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl; )V(WebAppServletContext.java:3661)
     at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread; )V(ServletRequestImpl.java:2630)
     at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest; )V(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178 )
     at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread; )V(Unknown Source)
----- END STACKTRACE -----
The page in question is just a simple JSP using Struts (v 1.0.2) to call in a template.
----- BEGIN JSP -----
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<%@ taglib uri="/WEB-INF/lib/struts.tld" prefix="struts" %>
<%@ taglib uri="/WEB-INF/lib/struts-bean.tld" prefix="bean" %>
<%@ taglib uri='/WEB-INF/lib/struts-template.tld' prefix='template' %>
<template:insert template='/t/system.jsp'>
<template:put name='title'><bean:message key="tit_su_h0"/></template:put>
<template:put name='sidenav' content='/t/su_snv.jsp'/>
<template:put name='content' content='/c/su_h0_c.jsp'/>
<template:put name='footer' content='/t/su_ftr.jsp' />
</template:insert>
----- END JSP -----
I passed the -keepGenerated flag to the precompile task in my Ant build so I could look at the line it's choking on, but it's not very helpful. I'm stuck. I can set up the build so it doesn't precompile the JSPs, but then the QA team wouldn't like me very much.

How can someone use a stolen iphone? does erasing the phone (which I feel like I should do) make it easier for the thief to use the iphone? If I don't erase it, it doesn't seem like anyone should be able to use the phone because of my password.

how can someone use a stolen iphone? does erasing the phone (which I feel like I should do) make it easier for the thief to use the iphone? If I don't erase it, it doesn't seem like anyone should be able to use the phone because of my password. Also, is it possible to retrieve anything that has been sent to the phone (i.e. text messages) since it was stolen through icloud? The "find my iphone" app says the device is offline but it rings when I call my number -- any idea how that would be the case? Thanks!!

You have a password, so good move on your part. Whether you erase it or the thief does, they still get to use the iPhone as theirs. Which is more important (pick one), protecting your data or punishing the thief?
Ringing occurs at the carrier. Chances are you're going to voicemail after only two or three rings. If you have an iCloud backup also a good move. Re-read my question in the first paragraph.

I restore my iPhone 4S on iTunes and then when restarted it is asking for valid SIM card and I don't have SIM card for that, I was just using the iPhone with wifi, any one can help? Please.

I restore my iPhone 4S on iTunes after the restore was completed the iPhone was restarted and now asking for valid SIM card which I didn't,t have and I was using the iPhone with wifi, and now can't use it because the screen is locked for SIM card. Can anyone help me please.
Thanks,
David

wjosten wrote:
Phil0124 wrote:
I doubt the phone is locked to GCI in any way
Well, you're wrong, & in fact not only is it locked, GCI does not offer unlocking for iPhones.
Fact is your post won't help the OP.
And you are 100% sure its locked to them? How can you know this? While GCI does not offer unlocking that does not mean the phone is actually locked to it. Get off your high horse.
Its possible the original owner had an unlocked phone. he was using with GCI. Or that GCI doesn't actually have locked phones. Seeing as they don't even have their own infrastructure but instead use AT&T's I doubt they'd have iPhones specifically locked to them and that would be the reason they do not offer unlocking (because there's nothing for them to unlock). And just to clarify, I'm not saying for a fact its not locked to them. It very well maybe be, but without knowing more about the phone and going by the fact GCI uses AT&T infrastrucure its possible its not locked. But here's no way to say for sure either way.
Trying a Sim card from AT&T or another carrier might just help the OP if its actually unlocked or locked to AT&T rather than GCI.

Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition. I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail. Any input is appreciated.

Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW? Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver. You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go. Hope this helps.
Jason N

HT1980 Using the iphone S App for optimum. Precisouly every 1/2 hr the connection to the App shuts off. Why, I and they have no answer ???

Using the iphone S App for optimum. Precisouly every 1/2 hr the connection to the App shuts off. WHY ???
Bud

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

Im looking for apple to donate some iphones for the youth work programme

looking for apple to donate some iphones for the youth work programme in the base youth centre to support the productity and effective rescouring of the team to enable them to increases there contact time with young people,

Good luck with that.
You're not talking to Apple. This forum is for technical support for using an iPhone in an enterprise environment.

I lost my phone and use the IPHone locater, Now that i got my phone back it is disabled and I don't know how to fix it. It had asked for a code but I have no idea what it is so I tried several things but to no avail

I lost my phone and used the iphone locater to find it. Now that it has been returned to me, it is disabled and says connect to ITUNES. Can you help me ?

Does the link below help?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

Trying to load flash file in iWeb and when I enter info in the "html snippet" box a "missing plug-in" message comes up (although i have adobe flash player in, if that's the plug-in they're looking for). Anyone have any similar problems or solution. Thanks

I'm trying to load flash file in iWeb and when i enter info in the "html snippet" box a "missing plug-in" message comes up (although i have Adobe Flash player installed, if that's the plug-in they're looking for). Anyone have any similar problems or solutions. Thanks

when i publish my site and vew it the page on the web it just comes up with the file name w/ the ,swf and the "mising plug-in" message below. if i click on the file name it displays the flash file but gigantic (the entire height of the page).totally perplexed!
anyway, here is the code.
<object classid=”clsid:D27CDB6E-AE6D-11cf-96B8-444553540000”codebase=”http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0, 40,0”width=”244” height=”221” id=”ETrade_banner_Gumby_replay”><paramname=movie value=”ETrade_banner_Gumby_replay.swf”><param name=qualityvalue=high><param name=base value=”.”><embed src=”ETrade_banner_Gumby_replay.swf”quality=high width=”244” height=”221” name=”ETrade_banner_Gumby_replay”align=”” type=”application/x-shockwave-flash” pluginspage=”http://www.macromedia.com/go/getflashplayer”base=”.”></embed></object>

II am looking for information on iPad and iPhone apps and Mac software that are "top of the line" for academic research. The most current and comprehensive information I have found is dated July 2010.

I am looking for information on iPad and iPhone apps and Mac software that are "top of the line" for academic research. The most current and comprehensive information I have found is dated July 2010.

PogoPossum,
My area of interest is in business and economic history. There is a considerable amount of reading and charting. Until the iPad hit the streets, I only considered stacks of books, journals, and downloaded documents, all marked up with highlighters, underlines, and marginal notes.
Most of my PC based work involved MS Office, Endnote, and MS OneNote.
What I would like to do with the iPad and MacBook are the same things (Office, Endnote, OneNote) and add the ability to read and markup all forms of printed materials from books to pdf to webpages.
I cut my teeth on an iPod Touch and have tried a lot of the note taking and reading apps. Without a camera the standard iPod Notes works for short quick notes and long think pieces. I just emailed the content and downloaded the stuff to my PC. Obviously, I do not want to continue at this "non-integrated" level of work.
Does this help?
Dick

Is there anyone using an iphone 4s, os 5.0.1, in kolkata india on service provided vodafone 3g and the phone working fine?

Is there anyone using an iphone 4s, os 5.0.1, in kolkata india on service provided vodafone 3g and the phone working fine?

hi i bought a iphone 4s recently and is having vodafone as service provider. my iphone is not recongising or detecting any 3G signal. Did your problem got solved by any chance?

Looking for opinions - anyone using the iPhone in NYC?

Similar Messages

Maybe you are looking for