Looking for Optical Bay Carrier Part # for 2010 Mac Pro?

Hello,
Was curious if anyone had the part # for the aluminum optical Bay Carrier for the 2010 Mac Pro / 8 Core?
I have called Apple and they can't provide me with that info. Thank you

I would suggest yo call one of the mac parts suppliers or repairers and see if they know the number or have the part. Here's some suggestions:
WeLoveMacs
macpartsonline
Mac-Pro

Similar Messages

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

DVD/Lightscribe drive for new (late 2010 Mac Pro?

Does anyone know a source for an internal DVD w/ Lightscribe drive for a late 2010 Mac Pro? I want to install it in the second drive bay. I got one from OWC, but the depth of the DVD drawer was about twice that of the original drive that came with the Mac Pro. It would have been able to fit through the drop cover on the front of the Pro, but would not clear the internal rack components. It fit in the rack nicely with the 4 screws lining up properly, but would then not open more than about an eighth of an inch before hitting the internal rack frame, causing it to close. Thanks.

Bummer! The instructions included with the drive did not mention thi. When I called OWC customer service she said that sometimes you had to remove the bezel from the Mac. I told her the Pro had no bezel. She said that the drive info did not specifically say it would fit a 2010 Pro a d gave me a RMA.'nmh bad for not questioning further. Thanks.

Best Video card for Mid 2010 Mac Pro

I'm currently running a Mid 2010 Mac Pro with a 5870 video card in it. I feel that it's bottlenecking processes, and want to upgrade it. I'm not looking to upgrade the computer itself, but want to get the fastest video card that I can.
Looking for suggestions, and links if possible to what you know works.
Thanks!

Why do you a) need a "fast" video card, and b) think it is the bottleneck (it might)?
Maybe you need dual AMD's and a 2nd 5870 (with the addition of 2nd 450W PSU to drive it).
This: July 25th, 2014 -- GeForce GTX 780 6G: Mac Pro Tower 'Sweet Spot'?
Do you have some SSDs for system and scratch? that often is where you can attack a bottleneck and improve performance.
Graphics can need as much RAM as possible. Dual or single cpu? many are choosing to install one or two faster cpus of the 3.4GHz variety to help.

2010 Mac Pro for FCP work: ATI 5770 or 5870? performance vs. fan noise

I'm planning to swap my old Mac Pro (2006 2 x 2.66 GHz Dual-Core Intel Xeon, 4 GB RAM, NVIDIA GeForce 7300 GT) for a 2010 Mac Pro model, because I need more speed for video (FCP 7, Color, Magic Bullet Looks) and photo (Lightroom 3, Photo Shop CS5) work. I'm thinking of the 6-Core (3.33 GHz) Mac Pro with 24 GB RAM and ATI Radeon 5870. I read a first review which said, that the 5870 is VERY noisy (fans), and now I'm little afraid. Is the 5870 really that loud, and will it bring clear advantages over the ATI 5770 (I dont't do 3D work yet)? I'd really appreciate your help. Thanks in advance.

Our showroom unit arrived 8/24.
Set it up and loaded it with my demo content. Motion rendering is noticeably faster.
I have yet to thrash it hard, but it's certainly no louder than its predecessor as far as I can tell.
EDIT: I see that you are in Germany. Where exactly?

2010 Mac Pro for video work: ATI 5770 or 5870? performance vs. fan noise

I'm planning to swap my old Mac Pro (2006 2 x 2.66 GHz Dual-Core Intel Xeon, 4 GB RAM, NVIDIA GeForce 7300 GT) for a 2010 Mac Pro model, because I need more speed for video (FCP 7, Color, Magic Bullet Looks) and photo (Lightroom 3, Photo Shop CS5) work. I'm thinking of the 6-Core (3.33 GHz) Mac Pro with 24 GB RAM and ATI Radeon 5870. I read a first review which said, that the 5870 is VERY noisy (fans), and now I'm little afraid. Is the 5870 really that loud, and will it bring clear advantages over the ATI 5770 (I dont't do 3D work yet)? I'd really appreciate your help. Thanks in advance.

I've got the 6-core w/5870 on order, so don't yet have it myself. I've been looking into this issue also, as noise is a concern.
This (http://techpowerup.com/reviews/ATI/RadeonHD5870/29.html) test showed me that the card is pretty typical at idle, but fairly loud when loaded.
I don't expect I'll be loading my video card much with the work that I do right now, so wasn't as concerned. In the end, I guess I'll find out when my new machine arrives.
Mark

Anyone having trouble with the new update for 2010 mac book air 10.8.2?

Anyone having trouble with the new update for 2010 mac book air 10.8.2 ? My 2010 Macbook Air has crashed 15times since the 10.8.2 update. Have only once since owning it.

Turned out the hardware was bad. Apple exchanged it for a new Mac Air and the new trackpad works great. Thank goodness it was a defect. If the trackpads all worked like that I would have been bummed.

I am looking for a Mac driver for a Muratec MFX 1430 printer/fax/copier. Is there one out there for a Mac?

Looking for a Mac driver for a Muratec MFX-1430 printer/fax/copier
is there such an animal out there?

http://www.muratec.com/new/support/drivers.asp does not appear to support that model at all on the Mac.
Some open source drivers* may exist to support it.
* Links to my pages may give me compensation.

HT204347 I just buy a Mac Pro from one Company in Cambodia and I really want to check where is the spare part of such mac pro come from? so please help me to check my mac pro, the serial number is SC02H250ADV14 . thanks for your kind assistance

Dear Sir,
I don't know how to search the source product of my Mac Pro which I just buy from one company in Cambodia, the company said that it is made in China and it's part of such Mac Pro is from USA. I'm not sure it is truth or not. So I would like you to double check it for me. The Serial of such Mac Pro is SC02****ADV14 , thanks for your assistance.
Regards,
S
<Edited by Host>

You can type in your machines serial number here to find out a little more about it, however, it won't tell you what components came from what countries to be assembled into the unit you have.

Apple service diagnostic discs for the Mac Pro 2010

Where can i find the apple service diagnostic discs (ASD) or especially the thermal calibration tool for the Mac Pro 2010?
Thanks
ffder1.

AppleCare Help Desk Tools - Apple Store (U.S.)

Suggest a better graphics card for my mac pro mid 2010

I use my Mid 2010 Mac Pro (not macbook pro) to do very heavy visual / special effects editing for film using the programs Blender, After Effects, Premier Pro and Element 3D. I need a graphics card with at least 3GB of VRAM but I am having a hard time finding one that isn't outrageously priced. I would really appreciate any suggestions for cards that aren't overclocked that would have the above VRAM or greater that would work with my particular Mac Pro. Thanks so much for any help.

How about HD7950 Mac Edition?
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

HT1151 2010 mac pro, my cable for my display won't fit, mac pro 21 pin display 30 pin ?

bought a 2010 mac pro. My display will not match up to it
my mac pro has 21 pins and my display has 30
is their a adapter to fix this. also usb and firewire don't match mine either
Help want to set it up

You need to provide more details as to what computer, what display, and what connector you have. USB and Firewire "don't match mine either" means what? Don't match what?

2010 Mac Pro with Apple RAID card - "Drive carrier 00:03 removed"

I've got a 2010 Mac Pro with the Apple RAID card and 4 internal identical Seagate ST32000641AS 2TB drives inside.
I've never had a problem with the RAID card (either battery or in operation) except for one thing:
Almost every time I shut the machine down (which I try to do as rarely as possible), it keeps losing Drive 3, the spare.
(See RAID Utility event log snippet below.)
[I wish I could understand why this Apple RAID card keeps losing the spare across power-cycles/reboots, but I digress.]
So I just adopted it as the spare and it spawns the rebuild and many hours later, everything's fine again.
... until the last time I rebooted (Jan. 2nd).
After the usual "I lost the spare" message upon login, it began the rebuild.
But this time, about 11 1/2 hours later the rebuild stopped and RAID Utility reported "Drive carrier 00:03 removed".
Bay 3 is now missing in the Controller view.
I powered off the system last night, and left it off overnight. Today I took all the drives out, blew the dust off and reseated them.
Same thing. Drive 3 is still missing, and now the rebuild task aborted.
The drive bay location shouldn't matter, right? Can I swap the Bay 3 drive with the Bay 4 drive?
I figure one of two things would happen:
(1) It will report Bay 3 as being there but Bay 4 as being missing, same situation as is now. Meaning the problem is in the Bay 3 spare drive.
(2) It will report Bay 3 as being missing (despite a 'good' drive being present) and Bay 4 will be the (unattached) spare, and the RAID set will be unviable. Meaning the problem is with the drive bay itself, not whatever drive is plugged into it.
If "Drive carrier removed" is trying to tell me the disk is bad, why do I not see any log messages about it? I suppose a spare that never gets used could go bad from lack of use, but ... no messages at all?
Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,4      5.23TB    0.00MB Rebuild: 0% complete
% sudo raidutil list driveinfo
Drives Raidset       Size      Flags
Bay #1 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #2 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #4 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Event log snippet:
Saturday, January 11, 2014 8:15:19 AM PT
Background task aborted: Task=Rebuild,Scope=DRVGRP,Group=RS1
informational
Friday, January 3, 2014 3:50:28 AM PT
Drive carrier 00:03 removed
informational
Thursday, January 2, 2014 4:29:37 PM PT
Marked drive in bay 3 as a global spare
informational
Thursday, January 2, 2014 4:29:28 PM PT
Adopted drive in bay 3
informational
Thursday, January 2, 2014 4:28:34 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Saturday, December 7, 2013 5:35:17 PM PT
Marked drive in bay 3 as a global spare
informational
Saturday, December 7, 2013 5:35:08 PM PT
Adopted drive in bay 3
informational
Saturday, December 7, 2013 5:34:11 PM PT
The "RedundancyScrub" command could not be executed. (Invalid request or invalid parameter in the request.)
warning
Saturday, December 7, 2013 5:34:03 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Friday, December 6, 2013 4:56:47 AM PT
Battery finished conditioning
informational
Thursday, December 5, 2013 9:53:44 PM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Friday, September 6, 2013 10:53:11 PM PT
Battery finished conditioning
informational
Friday, September 6, 2013 3:41:33 PM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Saturday, June 8, 2013 3:41:35 PM PT
Battery finished conditioning
informational
Saturday, June 8, 2013 8:37:49 AM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Thursday, May 30, 2013 4:09:51 PM PT
Marked drive in bay 3 as a global spare
informational
Thursday, May 30, 2013 4:09:42 PM PT
Adopted drive in bay 3
informational
Thursday, May 30, 2013 4:08:59 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Thursday, May 30, 2013 3:32:29 PM PT
Degraded RAID set RS1
warning

Power Pig wrote:
"Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,4      5.23TB    0.00MB Rebuild: 0% complete
I was talking about this.
This looks like a RAID 5 setup without the parity to me. I would said it basically a RAID 0.
Also you metioned "I guess that previous spare must really have gone 'bad', despite having never been used! "
I wiped everything out, I selected the 3 disks and clicked on "Create RAID Set" with RAID5 selected and the "Use unassigned drives as spares" option checked. The 3rd disk has always been marked as the spare ever since then. You do not have a choice to create a "RAID5 setup without the parity". If I wanted a RAID0 I would have chosen a RAID0! raidutil now says
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,3,4    5.23TB    0.00MB No tasks running
Every time the system would 'lose' Drive 3 on boot, I would just keep rebooting until it was 'found', and then manually re-assign the now-'floating' drive as the spare - and the RAID would rebuild.
There was never a problem until the day that prompted this post - when it would not find Drive 3 no matter what I did. I turned the Mac Pro off for several hours until the drives had all cooled down and it still did not find the drive. I left the machine on but unmounted the degraded volume until I got the new replacement drive.
I really don't understand what you are getting at. It's like you are trying to tell me I set it up as a 4-drive RAID5 with no parity(!) and that I was in grave danger because one of the disks was gone. The actual RAID contents (spread across Drives 1, 2 and 4) were never in danger, unless a 2nd disk had failed while the spare was not seen by the Apple RAID card. I wasn't too worried about that happening.

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Power consumption for latest mac pros?

I read on Apple.com somewhere that the 2008 Mac pro's maximum power consumption is 260+ Watts for a Quad-core. How different is it for the new Mac pros?

I guess English is a lost language now.
For the Mac Pro it is really really simple and based on 7 yrs of PowerMac G5s and then Mac Pro owners: 1500VA - you can get by with slightly smaller 1300VA and some people, because of better build, used SMART UPS 1000VA.
And as I said in another thread, the Mac Pro 'suffers' from inrush current that can knock out smaller UPS, and people that have tried to use 500-900VA units got into a lot of trouble and had to upgrade.
No one can know the total system watts used other than use a KILLAWATT on the power cord.
Look at the case, can an iMac dispel as much heat as easily? no. It is designed for lower power and much fewer components.
Core i7 has HyperTransport and Turbo boost for one thing. Apple had a huge coding problem with audio (incl iTunes and others), flash and Nehalem based systems. High cpu temperature and lost processor cycles and performance.
The 2010 Mac Pro can do more for the same, and DDR3 lowered heat and watts noticeably.
There are sites where you can plug in various components and get an idea of how large a PSU would be needed. Try one of those, too. PSU efficiency, and there is "overhead" needed for the motherboard chips and to run PCI Express for graphics, Firewire, etc. It all adds up.
Apple's example is low-end system configuration, the chart says CPU MAX, not SYSTEM (but then, most everything on hardware requirements lately needs a grain of salt).
Quad-core 2.66GHz configuration:
One 2.66GHz Quad-Core Intel Xeon "Nehalem" 3500 series processor,
3GB memory (three 1GB 1066MHz DDR3 ECC DIMMs),
640 GB Serial ATA 3 Gb/s 7200-rpm hard drive,
18x double-layer SuperDrive,
NVIDIA GeForce GT 120 with 512MB of GDDR3 memory
APC we know, whether PowerMac 2.0DP from 2003 or Quad G5, or Mac Pro, that 1500VA is strongly recommended.

Looking for Optical Bay Carrier Part # for 2010 Mac Pro?

Similar Messages

Maybe you are looking for