Looking for Performance Comparisons Between JRockit 6 and Sun Java SE 6

Hello,
Can someone point me to some performance comparisons (benchmarks, etc.) between the JRockit and Sun JVMs?
Thanks in advance.

Hi Ben.
Before I send to to the SPEC sites (which can be a tad hard to parse) I must ask - What application or type of application are you interested in? The answer will vary a bit depending on what you need.

Similar Messages

Synchronization between AD and Sun Java Directory Server

I would like to build an environment as below, kindly let me know whether it is possible or not.
My Enterprise Directory is Active Directory and i have Policy Server which directs the sso users to get authenticated with that server. I would like to synchronize the user data from Active Directory to Sun Java Directory Server (existing version is 5.2 Service Pack 4) including the passwords and i would like to know with which hashing algorithm these passwords are stored in the sun directory server. Because i want to synchronize the same attributes from sun java directory server to Oracle Internet Directory and is it possible to get my sso users to get authenticated at OID even?
Kindly let me know whether this approach is feasible or not?
Any suggestion to this approach is greatly appreciated...
Thanks in advance...
Regards,
Kishore Repakula.

i would like to know with which hashing algorithm these
passwords are stored in the sun directory server.Like most other directory servers, SunDS offers a few choices here.
The most secure is SSHA, which you'd probably want to use unless you have apps with dependencies on other hashes (e.g., CRYPT for backward compatibility with UNIX password field).
I would like to synchronize the user data from Active Directory
to Sun Java Directory Server (existing version is 5.2
Service Pack 4) including the passwords...Sun has a "Identity Synchronization for Windows" product which might work for you.
http://www.sun.com/software/products/directory_srvr_ee/identity_synch/
Unfortunately, the big trick with AD passwords is that they are stored in a proprietary one-way hash, so you can't just sync them directly over to another directory. Likewise, you can't import password hashes from other sources into AD and expect them to work.

Looking for infos about error code in Sun Java Directory Server 6.3.1.1.1

Hi,
I'm using Sun-Java(tm)-System-Directory/6.3.1.1.1 on Solaris 9 with two server configured in multi-master replication
For a few time I receive those warning in the error logfile :
[14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
[14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
[14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
[14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
[14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
[14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
and I would like to know what's going up and what I should do, so in case somebody have some infos about it, I would be very interrested.
I'm trying to find a way of veryfing fragmentation of the backend, but not sure about this.
TIA

Looks like the attribute sunIdentityServerDiscoEntries is defined twice in the schema. Run the following and see where it is defined for the second time.
# cd /var/opt/SUNWdsee/dsins1/config/schema
# grep -w sunIdentityServerDiscoEntries *.ldif | grep -iv objectclasses
Edited by: etst123 on Mar 3, 2009 1:28 PM

IDOCs performance creation between SAP and SAP Java Adaptor

Hi,
We have a legacy systemt that send some IDOCs to SAP ECC through a SAP JAVA connector. Problem is that we send the idocs and we detected that we have some performance issues on the IDOC creation.
We are using the SAP standard code and SM58, SMQ1, SMQ2, traces, etc etc seem to be fine.
As per customer requirement we have to use process inmediately on the partner profile. We also set the mass processing option but no difference .
We have also other functionalities that run on IDOCs and they are running fine without any performance issue on it .
Could someone help us?
Thanks a lot, Sapera

Hello,
What kind of performance issue u have noticed?
Check if below idoc_aae tuning note helps u...
1641541 - IDoc_AAE Adapter performance tuning
Thanks
Amit Srivastava

Comparison between 3750 and 3750-metro

hi folks,
is there any links which will provide me on the comparison between 3750 and 3750-metro? for exapmple, isis is not support on 3750 but it support on 3750-metro. The product information from cisco site is insufficient in term of the main differences :p
rgd
josh.w

Hi Josh,
The Cisco Catalyst 3750 Metro Series is built for Metro Ethernet access in a customer location, enabling the delivery of more differentiated Metro Ethernet services. These switches feature bidirectional hierarchical QoS and Traffic Shaping, intelligent 802.1Q tunneling with class-of-service (CoS) mutation, VLAN translation, MPLS, EoMPLS, and Hierarchical Virtual Private LAN Service (H-VPLS) support, and redundant AC or DC power. They are ideal for service providers seeking to deliver profitable business services, such as Layer 2, Layer 3, and MPLS VPNs, in a variety of bandwidths and with different SLAs.
The metro switches have the PXF chips (which allow hierarchical QoS on the 2 "WAN" GigE ports, so several logical links can share a connection, and have soft bandwidth limits).
For more details on 3750-M switches have a look at this link
http://www.cisco.com/en/US/products/hw/switches/ps5532/products_qanda_item09186a00801eb822.shtml
HTH
Ankur
*Pls rate all helpfull post

Graph axes assignment: performance difference between ATTR_ACTIVE_XAXIS and ATTR_PLOT_XAXIS

Hi,
I am using a xy graph with both x axes and both y axes. There are two possibilities when adding a new plot:
1) PlotXY and SetPlotAttribute ( , , , ATTR_PLOT_XAXIS, );
2) SetCtrlAttribute ( , , ATTR_ACTIVE_XAXIS, ) and PlotXY
I tend to prefer the second method because I would assume it to be slightly faster, but what do the experts say?
Thanks!
Solved!
Go to Solution.

Hi Wolfgang,
thank you for your interesting question.
First of all I want to say, that generally spoken, using the command "SetCtrlAttribute"is the best way to handle with your elements. I would suggest using this command when ever it is possible.
Now, to your question regarding the performance difference between "SetCtrlAttribute" and "SetPlotAttribute".
I think the performance difference occures, because in the background of the "SetPlotAttribute" command, another function called "ProcessDrawEvents" is executed. This event refreshes your plot again and again in the function whereas in the "SetCtrlAttribute" the refreshing is done once after the function has been finished. This might be a possible reason.
For example you have a progress bar which shows you the progress of installing a driver:
"SetPlotAttribute" would show you the progress bar moving step by step until installing the driver is done.
"SetCtrlAttribute" would just show you an empty bar at the start and a full progress bar when the installing process is done.
I think it is like that but I can't tell you 100%, therefore I would need to ask our developers.
If you want, i can forward the question to them, this might need some times. Also, then I would need to know which version of CVI you are using.
Please let me now if you want me to forward your question.
Have a nice day,
Abduelkerim
Sales
NI Germany

Comparison between Purisma and JCAPS?

I am researching several CDI (Customer Data Integration) solutions and I've narrowed this down to two solutions Purisma and JCAPS. I am mainly comparing the matching engines, record linkage efficiency and any machine learning capabilities.
Has anyone done a "head-to-head" comparison between JCAPS and Purisma?
Does anyone have any screenshots of the JCAPS record linkage tool for manual duplicate handling?
My blog: http://mycodeblog.blogspot.com

Why not write a test class? Shouldn't take long.

Comparison between Forms6i and Forms9i

We have some client/server-based applications built in Forms6i and are considering to convert/rebuild them into Forms9i or JDeveloper as web-based applications. Has anyone done any comparison between Forms6i and Forms9i/JDeveloper? Or, can you point me to such documentation if existed?
Thanks.

For comparison between forms 6i and Oracle9i Forms check out the new features paper on:
http://otn.oracle.com/products/forms
Comparison to JDeveloper? How about the fact that you develop with Java language in JDeveloper and with PL/SQL in Forms.
I would suggest that first you try to run your application on the Web using forms 6i. This should be a very simple test to do. See how you like it and only then ask yourself if you really need to go to JDeveloper.

Comparison between PeopleSoft and Fusion

Hi ,
I need to prepare a document to show up the comparison between PeopleSoft and Fusion. For eg: Business Unit in PeopleSoft and what is the concept in Fusion that is similar to Business Unit. Can anyone help me with a document that will give me detailed comparison between PeopleSoft and Fusion.
Thanks,
Fathima Farsatha

I can't find any comparison on the internal database. Can you add more about your goals with the question? Are you stuck with a Business unit issue or functionality. Since Fusion was built form the ground up it is a completely different software product. If you have a very specific question then we might be able to collaborate with different groups and provide an answer or fix.

Confused between Netbeans and Sun Studio Enterprise

Hi all,
Acually I am very confused between Netbeans and Sun Studio Enterprise/Creator.
Why sun did not concentrate on one IDE as Microsoft is doing with Visual Studio?
Now, I do not know what to learn....Netbeans or Sun Studio !!!
What make me more confused is that both are supported oficially by Sun. And both are free for SDN members!!!!!
So, what is the difference???!!!
regards

I tried it back when it was called Forte, and it seamed pretty
identical to netbeans. the only difference was that Forte could
only be used for personal use without a license.

TS4212 can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. I have been looking for over a week now   and even chatted with the USA but cannot get it to work

can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected.   what do I do
I have been looking for over a week now   and even chatted with the USA but cannot get it to work.
I am really struggling

Thanks
someone named Eloisa   she gave me   a phone no.   or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand

Looking for sample code using "first_tab" and "next_tab"

Looking for sample code using "first_tab" and "next_tab". How is it used with ItemID within a dialog box? I've read the reference books - don't understand it.

Hi Ray,
There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
You would just need to insert your DIO code in each frame of the sequence structure.
Hope that helps. Kind regards,
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current
Attachments:
70_PWM_Example.vi ‏23 KB

Comparison between OATS and QTP

Hi,
Does anyone have a kind of comparison between QTP and Oracle ATS ?
Thanks

Hi
I don't think there is a paper that compares both tools, is there anything in particular that you would like to know?
Regards
Alex

I am looking for some hotels on mozilla and encountered a strange issue, the hotel ad for first slot is not aligned in knowledge panel.

I was looking for a hotel on mozilla and the first hotel exhibiting in the ad is not aligned with knowledge panel. However it is showing correct result on other browsers. This error is not just contained for one hotel ad but to other as well. I am just curious if it's an issue from their end or some technical syntax error in mozilla
Please find an attachment.
Thanks.

You may have zoomed web page(s) by accident.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.

I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8. I would like to buy a new computer in the near future so would need it to be work on my next computer also. Any suggestion

I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8. I would like to buy a new computer in the near future so would need it to be work on my next computer also. Any suggestions?
MacBook, Mac OS X (10.6.8)

I am looking for a small Dell black and white, laser printer like the Energy Star 1133 that is compatible with my macbook, 10.6.8. I would like to buy a new computer in the near future so would need it to be work on my next computer also. Any suggestions?
MacBook, Mac OS X (10.6.8)

Looking for Performance Comparisons Between JRockit 6 and Sun Java SE 6

Similar Messages

Maybe you are looking for