Looking for pin outs on cable 198141A-2R​5

Looking for the pin to pin connections for the 198141A-2R5, which is the connection between the UMI7772 and stepper motor drive.
tks,
 terry

Martnlindhe,
I chose to purchase a MacMini Intel model to hookup to my 36 inch Sony TV.
I chose this model for several reasons as I also have a Web Camera hooked up to it at the same time via Firewire. I use Front Row and iTunes to distribute music throughout the house wirelessly to other stereos and to view what is playing now via the TV.
Here are some photos of the MacMini hooked up to the TV and using Front Row.
http://users.sisqtel.net/jkriz/MacMini/OSX.jpg
http://users.sisqtel.net/jkriz/MacMini/FrontRow.jpg
http://users.sisqtel.net/jkriz/MacMini/frontrow_albumcovers.jpg
The photos aren't that great but you get the idea. The TV screen looks great in person as opposed to the photos with the glare and the darkness.
Some TV's don't look as good as my TV looks from what I have heard so your TV may or may not look as good. I am about to upgrade to a 42 inch Panasonic HD Plasma TV which should give an even better picture. At this time, my TV is connected to the MacMini via the "S-Video" cable. The HDMI video cable is a better choice if your TV has that capability.
The new iTV from Apple is rumored to be released sometime this coming Spring.

Similar Messages

  • Looking for pin out for tx2000 touch screen

    any one have the pinout or know where I can get it for the TX2000 touch screen.  I'm looking to put this into my car as a monitor for my carputer. HP techs can you help me out. Many thanks.

    Hello mricci,
    As long as it is not customer induced damage, the screen is replaceable under your warranty. I do not believe changes in temperature would be considered CID. In other words, as long as you didn't drop it or throw it, it should be replaceable. I would contact the Ideapad Support line and schedule a repair for it.
    Keep in mind for future references that when a computer is exposed to temperatures coler than 32 F, the liquid in the lcd can freeze up when that happens. To warm up the computer, it must be exposed little by little to a warmer temperature to avoid damage to the screen and condensation to it's internal hardware. Hope that helps.
    A+ Certified

  • Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

    Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

    Extension cables for Thunderbolt don't yet exist, but Apple has recently released a Thunderbolt cable that is 2M or 6.5 feet long.  I just connected my 27" Thunderbolt display to my iMac, which sit about 4-feet apart from each other, and it works perfectly.  You just don't use the Thunderbolt connection cable that is attached to the display - plug the display's power cable in, and use the 6.5-foot Thunderbolt cable to connect the display to the computer. 

  • Looking for a 3 meter cable for iPad air

    I'm looking for a 3 meter cable for an ipad air.

    the longest Apple makes is 2M, but Griffin Technology sells a 3M lightning USB cable they claim is iPad Air compatible.
    http://store.griffintechnology.com/usb-to-lightning-connector-cables-3-meter-gc3 6633

  • Looking for legacy PCMCIA GPIB+ Cable

    We are looking for one of the older style GPIB cables no longer manufactured by NI. It is for the PCMCIA GPIB+ (it's a wider single row of pins instead of the newer double row narrower connector to the PCMCIA card). Any length is fine. Original part numbers are: 182362-01 or -02 or -04. Reply to email address below with prices. We'll pay for shipping.
    Thanks
    Larry W. Junek
    Software Development Manager and
    Certified Professional LabVIEW Developer
    Texas Mgt Associates, Inc.
    9107 Marbach Road, Suite 225
    San Antonio, TX 78245 USA
    210-673-8422 (Main)
    210-673-3622 (Fax)
    http://www.t-m-a.com/
    Email: [email protected]
    TMA is a member of the National Instruments Alliance
    Larry Junek, Certified LabVIEW Developer

    Hi Jaegen:
    The GPIB card you have is obsolete and has an obsolete connector on it. If you have the original cable shipped from NI with it, you should be able to get it to work. We, however, do not sell these cables anymore. I have included an attachement here of the pinouts for the connector you have in case you can find an old cable or possibly make your own.
    Thank you,
    Emilie S.
    National Instruments
    Applications Engineer
    Attachments:
    CablePinouts.jpg ‏76 KB

  • Looking for a specific IPod cable

    I'm new to this forum and I'm searching for a cable. The cable I'm looking for will allow me to hook up my Ipod from the dock connector on the bottom of the IPod to my car stereo using RCA jacks. I also want to be able to charge the IPod at the same time.
    I've found several cables where I can do this indvidually but nothing that will allow me to do both at the same time.

    Try the iPod FM Remote Control

  • Looking for Analog Out example using DMA and C++; cannot find sample "GenMultVoltUpdates_SWTimed"

    Looking for example for Analog Out to multiple channels using DMA and C++.  Found reference to sample "GenMultVoltUpdates_SWTimed" which I do not have and cannot find.

    Hello Gerry,
    When you install DAQmx, there is an option to install
    support for Measurement Studio.  When you
    select this option, it will install these examples onto your hard drive.  All of the examples can be found at the
    following location: (C:\Documents and Settings\All Users\Documents\National
    Instruments\NI-DAQ\Examples\DotNET2.0\Analog Out\Generate Voltage)
    Respectfully,
    Rob F
    Test Engineer
    Condition Measurements
    National Instruments

  • Looking for black, extra long cable.

    Any recommendations on an extra long black charging/sync cable for iPads? Found one but it does not actually charge. Desperately looking for a source to buy in quantity. Any recommendations welcome.

    If you're only looking for a longer charging cord, have you considered just buying an extenstion cord? Obviously, that won't work if you're connecting it to a computer but should do fine if you're using the power adapter.

  • Looking for "cut-out template / spray paint" effect shortcut plugin.

    Does anyone know of an existing action or plugin that produces a realistic "cut-out template / spray paint" effect like the one seen here?
    I know I could accomplish this manually, but it would take a lot longer and I have a series of these I need done.
    Thanks!

    I doubt anyone can work out exactly what you are after, from the way you have worded your question.  Will all these templates be the same, and if not, what will they look like?  Have you tried searching for Brush sets using the search criteria you are after? 

  • Looking for a particular extension cable to connect an iPod to Roadtrip

    Wondering if this exists...
    I've been using a Griffin Roadtrip for months, but I no longer want my iPod mounted on it as I drive. First off, it just rattles too much (I'm nervous about damaging the bottom pieces inside). But most importantly, I've found that I keep removing the iPod from the mount too often as I skip through or search for songs.
    I was wondering if anyone knew of an extension cord that connects between the Roadtrip's "dock" and to the iPod itself, allowing me to lay the player on the passenger seat next to me. I guess both ends of the cord would have to end in a "dock" piece.
    I realize that I can just buy a new car kit that will allow this (such as DLO's TransDock Micro), but I did spend a hefty sum for the Roadtrip gadget and don't want to abandon it altogether.
    Dell Inspiron   Windows XP   5G 60gb iPod, 4G 40gb iPod, 4gb iPod Nano

    No and No. Sell your original iPad and buy the iPad 2 if you want to do Facetime.
    It may be a hassle to you to sync them to the computer, but if your iPod and iPad were both stolen while you were out and about you will be glad the music, pictures, etc. are on your computer. And I hope you are regularly backing up your computer.
    You can go here to tell Apple you would like these items: http://www.apple.com/feedback/ipad.html

  • Looking for iPhone TTY Adapter Cable

    I use the Ultratec Superprint TTY for communicating with other TTY devices, or call a Relay System operator to communicate with hearing people. The TTY device has couplers to accept a land line telephone. The iPhone 5 has a TTY switch to connect the iPhone to the TTY device with TTY Adapter cable. The iPhone manual did not says where to find it. Has anyone seen such cable? If so, let me know.  Thank you.

    http://store.apple.com/us/product/MA854G/A/apple-iphone-tty-adapter

  • I'm looking for a sata connector cable for the dvdrom bay on a MacBook pro 8.2. Any ideas on where to get one?

    Is there any possible way of acquiring one of these? It is the small delicate ,T shaped cable to the rom.

    Probably either ifixit or OWC...
    Clinton

  • Looking for appropriate TV-Out cable

    Hey guys... I lost my tv-out cables in a recent move.  Looked all over for them, but they're gone.  The card that these fit is an XFX 7900GT.
    I really have two options.  The first, preferred option is to get a new 7-pin tv-out cable.  I have found one that would be perfect.  Unfortunately, it ships out of England.  (http://www.scan.co.uk/Products/ProductI … arProducts)
    I can't find this particular piece on any other website whatsoever.  I've been looking for something similar (Obviously, I don't want to spend a lot of money having this thing shipped only to not have it work), but so far have had little luck.
    The other option is to use a DVI-D converter, but most only go to HDTV component.  Unfortunately, I don't have an HDTV.
    However, I do plan on buying an HDTV at some point in the future, and would like the cable to support both RCA and Component (as the cord above does).
    Has anyone seen anything such as this anywhere available from a US retailer or e-tailer?  Any help would be greatly appreciated.

    Try setting tv out as the default accessory and then try it out.
    As far as I know Nokia has only one tv-out cable and that's the ca-75u which should be the same one you're referring to. Push the cable in firmly and make sure it goes all the way in. I have two cables and with one of them i have to take the cover off my phone for it to go all the way and work
    Show your appreciation. Hit that kudos button real hard

  • I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

    I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

    "Motion 5" is your friend.
    Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
    This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
    While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
    Motion 5: cheap at $49.99 (just got my download two days ago)
    Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
    If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
    Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

  • Looking for 9-pin mini DIN to 9-pin mini DIN GREEN for Inspire 5700 digital

    hi guys, I'm looking for this cable.
    9-pin mini DIN to 9-pin mini DIN (2 meters - Green)
    for my Inspire 5700 digital.
    http://images.americas.creative.com/...mall89___6.gif
    Currently I'm using the RED version from FPS2000, but I get no sound for Center speakers and SubW. So I suspect both cables are different internally although the connectors are the same.
    Anyone knows where to get it in Msia.. or can I buy it from Creative Spore?
    OR
    Anyone using this set with analog mode, then can sell this DIN cable to me..
    Thanks

    hi body,where did u get that cable?i need that cable too!!!!!!!!!
    please help me out!!!!u can check my post in this forum
    http://forums.creative.com/creativel...message.id=448

Maybe you are looking for